From: "Matias Bjørling" <m@bjorling.me> To: linux-block@vger.kernel.org, linux-kernel@vger.kernel.org, linux-nvme@lists.infradead.org, axboe@fb.com Cc: "Matias Bjørling" <m@bjorling.me> Subject: [PATCH 00/13] lightnvm updates for 4.4-rc2 Date: Mon, 16 Nov 2015 15:34:34 +0100 [thread overview] Message-ID: <1447684487-25539-1-git-send-email-m@bjorling.me> (raw) Hi Jens, This is the patches targeted for -rc2 of 4.4. Ten of the patches fix bugs and small specification updates. While the last two are larger patches. They are necessary because of specification changes. The updates are applied now before it is set in stone for 4.4 (or at least makes it a lot harder to change) Patch 1: Adds the linux-block list to the maintainers list for LightNVM. Patch 2: Fixes a ushort bug reported by Geert. Patch 3: Updates the implementation to support the new bad block table format. Patch 4-9: Small fixes. Patch 10: The specification had support for both linear and device specific addressing. It was replaced by ppa format, that defines the device ppa format used by the specific device. This patch adds the support and removes the previous two modes. Patch 11-12: Two small cleanups to the lightnvm nvme integration. Caused by specification changes. Patches 3 to 12 is the first time they are posted to the list for review. Will you pick up the patches when convenient (and reviewed): git@github.com:OpenChannelSSD/linux.git for-jens I'll update the for-jens branch and post a separate patch if any fixes is applied to the patches. Javier González (1): lightnvm: cleanup queue before target removal Matias Bjørling (12): MAINTAINERS: Add linux-block list to LightNVM for patches lightnvm: change max_phys_sect to uint lightnvm: update bad block table format lightnvm: update alignments for identify command lightnvm: expose mccap in identify command lightnvm: remove unused attrs in nvm_id structs lightnvm: check for NAND flash and its type lightnvm: prematurely activate nvm_dev lightnvm: prevent double free on init error lightnvm: remove linear and device addr modes nvme: missing ppaf copy nvme: remove reserved double word MAINTAINERS | 1 + drivers/lightnvm/core.c | 37 +++++----- drivers/lightnvm/gennvm.c | 40 ++++++---- drivers/lightnvm/gennvm.h | 2 + drivers/lightnvm/rrpc.c | 32 +++++++- drivers/nvme/host/lightnvm.c | 126 +++++++++++++++++++++++++------- include/linux/lightnvm.h | 170 ++++++++++--------------------------------- 7 files changed, 219 insertions(+), 189 deletions(-) -- 2.1.4
WARNING: multiple messages have this Message-ID (diff)
From: m@bjorling.me (Matias Bjørling) Subject: [PATCH 00/13] lightnvm updates for 4.4-rc2 Date: Mon, 16 Nov 2015 15:34:34 +0100 [thread overview] Message-ID: <1447684487-25539-1-git-send-email-m@bjorling.me> (raw) Hi Jens, This is the patches targeted for -rc2 of 4.4. Ten of the patches fix bugs and small specification updates. While the last two are larger patches. They are necessary because of specification changes. The updates are applied now before it is set in stone for 4.4 (or at least makes it a lot harder to change) Patch 1: Adds the linux-block list to the maintainers list for LightNVM. Patch 2: Fixes a ushort bug reported by Geert. Patch 3: Updates the implementation to support the new bad block table format. Patch 4-9: Small fixes. Patch 10: The specification had support for both linear and device specific addressing. It was replaced by ppa format, that defines the device ppa format used by the specific device. This patch adds the support and removes the previous two modes. Patch 11-12: Two small cleanups to the lightnvm nvme integration. Caused by specification changes. Patches 3 to 12 is the first time they are posted to the list for review. Will you pick up the patches when convenient (and reviewed): git at github.com:OpenChannelSSD/linux.git for-jens I'll update the for-jens branch and post a separate patch if any fixes is applied to the patches. Javier Gonz?lez (1): lightnvm: cleanup queue before target removal Matias Bj?rling (12): MAINTAINERS: Add linux-block list to LightNVM for patches lightnvm: change max_phys_sect to uint lightnvm: update bad block table format lightnvm: update alignments for identify command lightnvm: expose mccap in identify command lightnvm: remove unused attrs in nvm_id structs lightnvm: check for NAND flash and its type lightnvm: prematurely activate nvm_dev lightnvm: prevent double free on init error lightnvm: remove linear and device addr modes nvme: missing ppaf copy nvme: remove reserved double word MAINTAINERS | 1 + drivers/lightnvm/core.c | 37 +++++----- drivers/lightnvm/gennvm.c | 40 ++++++---- drivers/lightnvm/gennvm.h | 2 + drivers/lightnvm/rrpc.c | 32 +++++++- drivers/nvme/host/lightnvm.c | 126 +++++++++++++++++++++++++------- include/linux/lightnvm.h | 170 ++++++++++--------------------------------- 7 files changed, 219 insertions(+), 189 deletions(-) -- 2.1.4
next reply other threads:[~2015-11-16 14:37 UTC|newest] Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top 2015-11-16 14:34 Matias Bjørling [this message] 2015-11-16 14:34 ` [PATCH 00/13] lightnvm updates for 4.4-rc2 Matias Bjørling 2015-11-16 14:34 ` [PATCH 01/13] MAINTAINERS: Add linux-block list to LightNVM for patches Matias Bjørling 2015-11-16 14:34 ` Matias Bjørling 2015-11-16 14:34 ` [PATCH 02/13] lightnvm: change max_phys_sect to uint Matias Bjørling 2015-11-16 14:34 ` Matias Bjørling 2015-11-16 14:34 ` [PATCH 03/13] lightnvm: update bad block table format Matias Bjørling 2015-11-16 14:34 ` Matias Bjørling 2015-11-16 14:34 ` [PATCH 04/13] lightnvm: update alignments for identify command Matias Bjørling 2015-11-16 14:34 ` Matias Bjørling 2015-11-16 14:34 ` [PATCH 05/13] lightnvm: expose mccap in " Matias Bjørling 2015-11-16 14:34 ` Matias Bjørling 2015-11-16 14:34 ` [PATCH 06/13] lightnvm: remove unused attrs in nvm_id structs Matias Bjørling 2015-11-16 14:34 ` Matias Bjørling 2015-11-16 14:34 ` [PATCH 07/13] lightnvm: check for NAND flash and its type Matias Bjørling 2015-11-16 14:34 ` Matias Bjørling 2015-11-16 14:34 ` [PATCH 08/13] lightnvm: prematurely activate nvm_dev Matias Bjørling 2015-11-16 14:34 ` Matias Bjørling 2015-11-16 14:34 ` [PATCH 09/13] lightnvm: prevent double free on init error Matias Bjørling 2015-11-16 14:34 ` Matias Bjørling 2015-11-16 14:34 ` [PATCH 10/13] lightnvm: remove linear and device addr modes Matias Bjørling 2015-11-16 14:34 ` Matias Bjørling 2015-11-16 14:34 ` [PATCH 11/13] nvme: missing ppaf copy Matias Bjørling 2015-11-16 14:34 ` Matias Bjørling 2015-11-16 14:34 ` [PATCH 12/13] nvme: remove reserved double word Matias Bjørling 2015-11-16 14:34 ` Matias Bjørling 2015-11-16 14:34 ` [PATCH 13/13] lightnvm: cleanup queue before target removal Matias Bjørling 2015-11-16 14:34 ` Matias Bjørling 2015-11-16 22:25 ` [PATCH 00/13] lightnvm updates for 4.4-rc2 Jens Axboe 2015-11-16 22:25 ` Jens Axboe
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1447684487-25539-1-git-send-email-m@bjorling.me \ --to=m@bjorling.me \ --cc=axboe@fb.com \ --cc=linux-block@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-nvme@lists.infradead.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.