All of lore.kernel.org
 help / color / mirror / Atom feed
From: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
To: Liam Girdwood <lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Jaroslav Kysela <perex-/Fr2/VpizcU@public.gmane.org>,
	Takashi Iwai <tiwai-IBi9RG/b67k@public.gmane.org>,
	Maxime Ripard
	<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
	Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
Cc: alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	devicetree <devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
	linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
	Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Subject: [PATCH 1/4] ASoC: sun4i-codec: Add support for PA gpio pin
Date: Fri, 20 Nov 2015 14:47:10 +0100	[thread overview]
Message-ID: <1448027233-750-1-git-send-email-hdegoede@redhat.com> (raw)

Add support for PA gpio pin for controlling an external amplifier as used
on some Allwinner boards.

Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
 .../devicetree/bindings/sound/sun4i-codec.txt      |  3 +++
 sound/soc/sunxi/sun4i-codec.c                      | 25 ++++++++++++++--------
 2 files changed, 19 insertions(+), 9 deletions(-)

diff --git a/Documentation/devicetree/bindings/sound/sun4i-codec.txt b/Documentation/devicetree/bindings/sound/sun4i-codec.txt
index c92966b..974babe 100644
--- a/Documentation/devicetree/bindings/sound/sun4i-codec.txt
+++ b/Documentation/devicetree/bindings/sound/sun4i-codec.txt
@@ -14,6 +14,9 @@ Required properties:
    - "apb": the parent APB clock for this controller
    - "codec": the parent module clock
 
+Optional properties:
+- pa-gpios: gpio to enable external amplifier
+
 Example:
 codec: codec@01c22c00 {
 	#sound-dai-cells = <0>;
diff --git a/sound/soc/sunxi/sun4i-codec.c b/sound/soc/sunxi/sun4i-codec.c
index bcbf4da..2aca9cd 100644
--- a/sound/soc/sunxi/sun4i-codec.c
+++ b/sound/soc/sunxi/sun4i-codec.c
@@ -27,6 +27,7 @@
 #include <linux/of_address.h>
 #include <linux/clk.h>
 #include <linux/regmap.h>
+#include <linux/gpio/consumer.h>
 
 #include <sound/core.h>
 #include <sound/pcm.h>
@@ -101,16 +102,15 @@ struct sun4i_codec {
 	struct regmap	*regmap;
 	struct clk	*clk_apb;
 	struct clk	*clk_module;
+	struct gpio_desc *gpio_pa;
 
 	struct snd_dmaengine_dai_dma_data	playback_dma_data;
 };
 
 static void sun4i_codec_start_playback(struct sun4i_codec *scodec)
 {
-	/*
-	 * FIXME: according to the BSP, we might need to drive a PA
-	 *        GPIO high here on some boards
-	 */
+	if (scodec->gpio_pa)
+		gpiod_set_value_cansleep(scodec->gpio_pa, 1);
 
 	/* Flush TX FIFO */
 	regmap_update_bits(scodec->regmap, SUN4I_CODEC_DAC_FIFOC,
@@ -125,15 +125,13 @@ static void sun4i_codec_start_playback(struct sun4i_codec *scodec)
 
 static void sun4i_codec_stop_playback(struct sun4i_codec *scodec)
 {
-	/*
-	 * FIXME: according to the BSP, we might need to drive a PA
-	 *        GPIO low here on some boards
-	 */
-
 	/* Disable DAC DRQ */
 	regmap_update_bits(scodec->regmap, SUN4I_CODEC_DAC_FIFOC,
 			   BIT(SUN4I_CODEC_DAC_FIFOC_DAC_DRQ_EN),
 			   0);
+
+	if (scodec->gpio_pa)
+		gpiod_set_value_cansleep(scodec->gpio_pa, 0);
 }
 
 static int sun4i_codec_trigger(struct snd_pcm_substream *substream, int cmd,
@@ -633,6 +631,15 @@ static int sun4i_codec_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
+	scodec->gpio_pa = devm_gpiod_get_optional(&pdev->dev, "pa",
+						  GPIOD_OUT_HIGH);
+	if (IS_ERR(scodec->gpio_pa)) {
+		ret = PTR_ERR(scodec->gpio_pa);
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Failed to get pa gpio: %d\n", ret);
+		return ret;
+	}
+
 	/* DMA configuration for TX FIFO */
 	scodec->playback_dma_data.addr = res->start + SUN4I_CODEC_DAC_TXDATA;
 	scodec->playback_dma_data.maxburst = 4;
-- 
2.5.0

WARNING: multiple messages have this Message-ID (diff)
From: hdegoede@redhat.com (Hans de Goede)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/4] ASoC: sun4i-codec: Add support for PA gpio pin
Date: Fri, 20 Nov 2015 14:47:10 +0100	[thread overview]
Message-ID: <1448027233-750-1-git-send-email-hdegoede@redhat.com> (raw)

Add support for PA gpio pin for controlling an external amplifier as used
on some Allwinner boards.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 .../devicetree/bindings/sound/sun4i-codec.txt      |  3 +++
 sound/soc/sunxi/sun4i-codec.c                      | 25 ++++++++++++++--------
 2 files changed, 19 insertions(+), 9 deletions(-)

diff --git a/Documentation/devicetree/bindings/sound/sun4i-codec.txt b/Documentation/devicetree/bindings/sound/sun4i-codec.txt
index c92966b..974babe 100644
--- a/Documentation/devicetree/bindings/sound/sun4i-codec.txt
+++ b/Documentation/devicetree/bindings/sound/sun4i-codec.txt
@@ -14,6 +14,9 @@ Required properties:
    - "apb": the parent APB clock for this controller
    - "codec": the parent module clock
 
+Optional properties:
+- pa-gpios: gpio to enable external amplifier
+
 Example:
 codec: codec at 01c22c00 {
 	#sound-dai-cells = <0>;
diff --git a/sound/soc/sunxi/sun4i-codec.c b/sound/soc/sunxi/sun4i-codec.c
index bcbf4da..2aca9cd 100644
--- a/sound/soc/sunxi/sun4i-codec.c
+++ b/sound/soc/sunxi/sun4i-codec.c
@@ -27,6 +27,7 @@
 #include <linux/of_address.h>
 #include <linux/clk.h>
 #include <linux/regmap.h>
+#include <linux/gpio/consumer.h>
 
 #include <sound/core.h>
 #include <sound/pcm.h>
@@ -101,16 +102,15 @@ struct sun4i_codec {
 	struct regmap	*regmap;
 	struct clk	*clk_apb;
 	struct clk	*clk_module;
+	struct gpio_desc *gpio_pa;
 
 	struct snd_dmaengine_dai_dma_data	playback_dma_data;
 };
 
 static void sun4i_codec_start_playback(struct sun4i_codec *scodec)
 {
-	/*
-	 * FIXME: according to the BSP, we might need to drive a PA
-	 *        GPIO high here on some boards
-	 */
+	if (scodec->gpio_pa)
+		gpiod_set_value_cansleep(scodec->gpio_pa, 1);
 
 	/* Flush TX FIFO */
 	regmap_update_bits(scodec->regmap, SUN4I_CODEC_DAC_FIFOC,
@@ -125,15 +125,13 @@ static void sun4i_codec_start_playback(struct sun4i_codec *scodec)
 
 static void sun4i_codec_stop_playback(struct sun4i_codec *scodec)
 {
-	/*
-	 * FIXME: according to the BSP, we might need to drive a PA
-	 *        GPIO low here on some boards
-	 */
-
 	/* Disable DAC DRQ */
 	regmap_update_bits(scodec->regmap, SUN4I_CODEC_DAC_FIFOC,
 			   BIT(SUN4I_CODEC_DAC_FIFOC_DAC_DRQ_EN),
 			   0);
+
+	if (scodec->gpio_pa)
+		gpiod_set_value_cansleep(scodec->gpio_pa, 0);
 }
 
 static int sun4i_codec_trigger(struct snd_pcm_substream *substream, int cmd,
@@ -633,6 +631,15 @@ static int sun4i_codec_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
+	scodec->gpio_pa = devm_gpiod_get_optional(&pdev->dev, "pa",
+						  GPIOD_OUT_HIGH);
+	if (IS_ERR(scodec->gpio_pa)) {
+		ret = PTR_ERR(scodec->gpio_pa);
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Failed to get pa gpio: %d\n", ret);
+		return ret;
+	}
+
 	/* DMA configuration for TX FIFO */
 	scodec->playback_dma_data.addr = res->start + SUN4I_CODEC_DAC_TXDATA;
 	scodec->playback_dma_data.maxburst = 4;
-- 
2.5.0

             reply	other threads:[~2015-11-20 13:47 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-11-20 13:47 Hans de Goede [this message]
2015-11-20 13:47 ` [PATCH 1/4] ASoC: sun4i-codec: Add support for PA gpio pin Hans de Goede
     [not found] ` <1448027233-750-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2015-11-20 13:47   ` [PATCH 2/4] ARM: dts: sun4i: Enable onboard codec used on the iNet1 tablet Hans de Goede
2015-11-20 13:47     ` Hans de Goede
     [not found]     ` <1448027233-750-2-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2015-11-20 16:18       ` Maxime Ripard
2015-11-20 16:18         ` Maxime Ripard
2015-11-20 13:47   ` [PATCH 3/4] ARM: dts: sun5i: Enable onboard codec used on the UTOO P66 tablet Hans de Goede
2015-11-20 13:47     ` Hans de Goede
2015-11-20 13:47   ` [PATCH 4/4] ARM: dts: sun4i: Enable onboard codec used on the pov protab2-ips9 tablet Hans de Goede
2015-11-20 13:47     ` Hans de Goede
2015-11-20 15:23   ` [PATCH 1/4] ASoC: sun4i-codec: Add support for PA gpio pin Rob Herring
2015-11-20 15:23     ` Rob Herring
2015-11-20 16:30   ` Maxime Ripard
2015-11-20 16:30     ` Maxime Ripard
2015-11-20 16:42     ` Chen-Yu Tsai
2015-11-20 16:42       ` Chen-Yu Tsai
     [not found]       ` <CAGb2v66PPm+G=RfrLgNHNeVDed8BSuGaERKLgfsnzPpAzKcmsA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-11-20 17:02         ` Maxime Ripard
2015-11-20 17:02           ` Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1448027233-750-1-git-send-email-hdegoede@redhat.com \
    --to=hdegoede-h+wxahxf7alqt0dzr+alfa@public.gmane.org \
    --cc=alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org \
    --cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org \
    --cc=maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
    --cc=perex-/Fr2/VpizcU@public.gmane.org \
    --cc=tiwai-IBi9RG/b67k@public.gmane.org \
    --cc=wens-jdAy2FN1RRM@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.