From: Arnd Bergmann <arnd@arndb.de>
To: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org, Kukjin Kim <kgene@kernel.org>,
Krzysztof Kozlowski <k.kozlowski@samsung.com>,
Mark Brown <broonie@kernel.org>,
Vasily Khoruzhick <anarsoul@gmail.com>,
Charles Keepax <ckeepax@opensource.wolfsonmicro.com>,
Tomasz Figa <tfiga@chromium.org>,
Ben Dooks <ben.dooks@codethink.co.uk>,
linux-samsung-soc@vger.kernel.org, Arnd Bergmann <arnd@arndb.de>
Subject: [PATCH 05/10] ARM: s3c64xx: enable sparse IRQ support
Date: Wed, 25 Nov 2015 17:06:50 +0100 [thread overview]
Message-ID: <1448467615-447097-6-git-send-email-arnd@arndb.de> (raw)
In-Reply-To: <1448467615-447097-1-git-send-email-arnd@arndb.de>
This is another prerequisite for enabling multiplatform
support, and it is the part I am least certain about.
I assume it will cause the extra boot message "Cannot
allocate irq_descs @ IRQ%d, assuming pre-allocated" to
be printed, but otherwise work ok. This definitely needs
to be tested on real hardware to see if it works.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/Kconfig | 1 +
arch/arm/mach-s3c64xx/common.c | 1 +
arch/arm/mach-s3c64xx/dev-uart.c | 1 +
arch/arm/mach-s3c64xx/include/mach/irqs.h | 20 +++-----------------
arch/arm/mach-s3c64xx/include/mach/pm-core.h | 1 +
arch/arm/mach-s3c64xx/mach-anw6410.c | 3 ++-
arch/arm/mach-s3c64xx/mach-crag6410-module.c | 2 ++
arch/arm/mach-s3c64xx/mach-crag6410.c | 2 ++
arch/arm/mach-s3c64xx/mach-hmt.c | 2 ++
arch/arm/mach-s3c64xx/mach-mini6410.c | 2 ++
arch/arm/mach-s3c64xx/mach-ncp.c | 2 ++
arch/arm/mach-s3c64xx/mach-real6410.c | 3 ++-
arch/arm/mach-s3c64xx/mach-smartq5.c | 2 ++
arch/arm/mach-s3c64xx/mach-smartq7.c | 2 ++
arch/arm/mach-s3c64xx/mach-smdk6400.c | 3 ++-
arch/arm/mach-s3c64xx/mach-smdk6410.c | 3 ++-
arch/arm/plat-samsung/gpio-samsung.c | 1 +
17 files changed, 30 insertions(+), 21 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 83f42877328d..1ec6a153d8e5 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -649,6 +649,7 @@ config ARCH_S3C64XX
select SAMSUNG_ATAGS
select SAMSUNG_WAKEMASK
select SAMSUNG_WDT_RESET
+ select SPARSE_IRQ
help
Samsung S3C64XX series based systems
diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c
index 3dea4a4ef165..7c66ce1a6bb6 100644
--- a/arch/arm/mach-s3c64xx/common.c
+++ b/arch/arm/mach-s3c64xx/common.c
@@ -39,6 +39,7 @@
#include <asm/system_misc.h>
#include <mach/map.h>
+#include <mach/irqs.h>
#include <mach/hardware.h>
#include <mach/regs-gpio.h>
#include <mach/gpio-samsung.h>
diff --git a/arch/arm/mach-s3c64xx/dev-uart.c b/arch/arm/mach-s3c64xx/dev-uart.c
index 46e18d77ea93..a0b4f0329811 100644
--- a/arch/arm/mach-s3c64xx/dev-uart.c
+++ b/arch/arm/mach-s3c64xx/dev-uart.c
@@ -23,6 +23,7 @@
#include <asm/mach/irq.h>
#include <mach/hardware.h>
#include <mach/map.h>
+#include <mach/irqs.h>
#include <plat/devs.h>
diff --git a/arch/arm/mach-s3c64xx/include/mach/irqs.h b/arch/arm/mach-s3c64xx/include/mach/irqs.h
index 67bbd1dd04c2..3ceb00b5de07 100644
--- a/arch/arm/mach-s3c64xx/include/mach/irqs.h
+++ b/arch/arm/mach-s3c64xx/include/mach/irqs.h
@@ -156,25 +156,11 @@
#define IRQ_EINT_GROUP(group, no) (IRQ_EINT_GROUP##group##_BASE + (no))
-/* Define a group of interrupts for board-specific use (eg, for MFD
- * interrupt controllers). */
+/* Some boards have their own IRQs behind this */
#define IRQ_BOARD_START (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1)
-#ifdef CONFIG_MACH_WLF_CRAGG_6410
-#define IRQ_BOARD_NR 160
-#elif defined(CONFIG_SMDK6410_WM1190_EV1)
-#define IRQ_BOARD_NR 64
-#elif defined(CONFIG_SMDK6410_WM1192_EV1)
-#define IRQ_BOARD_NR 64
-#else
-#define IRQ_BOARD_NR 16
-#endif
-
-#define IRQ_BOARD_END (IRQ_BOARD_START + IRQ_BOARD_NR)
-
-/* Set the default NR_IRQS */
-
-#define NR_IRQS (IRQ_BOARD_END + 1)
+/* Set the default nr_irqs, boards can override if necessary */
+#define S3C64XX_NR_IRQS IRQ_BOARD_START
/* Compatibility */
diff --git a/arch/arm/mach-s3c64xx/include/mach/pm-core.h b/arch/arm/mach-s3c64xx/include/mach/pm-core.h
index a30a1e3ffc6a..32d2ff54f82d 100644
--- a/arch/arm/mach-s3c64xx/include/mach/pm-core.h
+++ b/arch/arm/mach-s3c64xx/include/mach/pm-core.h
@@ -18,6 +18,7 @@
#include <linux/serial_s3c.h>
#include <mach/regs-gpio.h>
+#include <mach/regs-clock.h>
static inline void s3c_pm_debug_init_uart(void)
{
diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c
index 6224c67f5061..347ce6009a8c 100644
--- a/arch/arm/mach-s3c64xx/mach-anw6410.c
+++ b/arch/arm/mach-s3c64xx/mach-anw6410.c
@@ -47,6 +47,7 @@
#include <plat/devs.h>
#include <plat/cpu.h>
+#include <mach/irqs.h>
#include <mach/regs-gpio.h>
#include <mach/gpio-samsung.h>
#include <plat/samsung-time.h>
@@ -229,7 +230,7 @@ static void __init anw6410_machine_init(void)
MACHINE_START(ANW6410, "A&W6410")
/* Maintainer: Kwangwoo Lee <kwangwoo.lee@gmail.com> */
.atag_offset = 0x100,
-
+ .nr_irqs = S3C64XX_NR_IRQS,
.init_irq = s3c6410_init_irq,
.map_io = anw6410_map_io,
.init_machine = anw6410_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
index be21f06e6b3f..571f95cc5a53 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
@@ -30,6 +30,8 @@
#include <linux/platform_data/spi-s3c64xx.h>
#include <plat/cpu.h>
+#include <mach/irqs.h>
+
#include "crag6410.h"
static struct s3c64xx_spi_csinfo wm0010_spi_csinfo = {
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index f776adcdaee8..a237b9b117b5 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -52,6 +52,7 @@
#include <mach/map.h>
#include <mach/regs-gpio.h>
#include <mach/gpio-samsung.h>
+#include <mach/irqs.h>
#include <plat/fb.h>
#include <plat/sdhci.h>
@@ -860,6 +861,7 @@ static void __init crag6410_machine_init(void)
MACHINE_START(WLF_CRAGG_6410, "Wolfson Cragganmore 6410")
/* Maintainer: Mark Brown <broonie@opensource.wolfsonmicro.com> */
.atag_offset = 0x100,
+ .nr_irqs = S3C64XX_NR_IRQS,
.init_irq = s3c6410_init_irq,
.map_io = crag6410_map_io,
.init_machine = crag6410_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c
index 816b39d1e6d1..bc7dc1fcbf7d 100644
--- a/arch/arm/mach-s3c64xx/mach-hmt.c
+++ b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -31,6 +31,7 @@
#include <video/samsung_fimd.h>
#include <mach/hardware.h>
#include <mach/map.h>
+#include <mach/irqs.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
@@ -279,6 +280,7 @@ static void __init hmt_machine_init(void)
MACHINE_START(HMT, "Airgoo-HMT")
/* Maintainer: Peter Korsgaard <jacmet@sunsite.dk> */
.atag_offset = 0x100,
+ .nr_irqs = S3C64XX_NR_IRQS,
.init_irq = s3c6410_init_irq,
.map_io = hmt_map_io,
.init_machine = hmt_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
index ab61af50bfb9..3ce5842ed51b 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -41,6 +41,7 @@
#include <linux/platform_data/mmc-sdhci-s3c.h>
#include <plat/sdhci.h>
#include <linux/platform_data/touchscreen-s3c2410.h>
+#include <mach/irqs.h>
#include <video/platform_lcd.h>
#include <video/samsung_fimd.h>
@@ -363,6 +364,7 @@ static void __init mini6410_machine_init(void)
MACHINE_START(MINI6410, "MINI6410")
/* Maintainer: Darius Augulis <augulis.darius@gmail.com> */
.atag_offset = 0x100,
+ .nr_irqs = S3C64XX_NR_IRQS,
.init_irq = s3c6410_init_irq,
.map_io = mini6410_map_io,
.init_machine = mini6410_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c
index 80cb1446f69f..23baaa04318c 100644
--- a/arch/arm/mach-s3c64xx/mach-ncp.c
+++ b/arch/arm/mach-s3c64xx/mach-ncp.c
@@ -31,6 +31,7 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
+#include <mach/irqs.h>
#include <mach/hardware.h>
#include <mach/map.h>
@@ -100,6 +101,7 @@ static void __init ncp_machine_init(void)
MACHINE_START(NCP, "NCP")
/* Maintainer: Samsung Electronics */
.atag_offset = 0x100,
+ .nr_irqs = S3C64XX_NR_IRQS,
.init_irq = s3c6410_init_irq,
.map_io = ncp_map_io,
.init_machine = ncp_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c
index 85fa9598b980..ca6548a1ed3b 100644
--- a/arch/arm/mach-s3c64xx/mach-real6410.c
+++ b/arch/arm/mach-s3c64xx/mach-real6410.c
@@ -33,6 +33,7 @@
#include <mach/map.h>
#include <mach/regs-gpio.h>
#include <mach/gpio-samsung.h>
+#include <mach/irqs.h>
#include <plat/adc.h>
#include <plat/cpu.h>
@@ -331,7 +332,7 @@ static void __init real6410_machine_init(void)
MACHINE_START(REAL6410, "REAL6410")
/* Maintainer: Darius Augulis <augulis.darius@gmail.com> */
.atag_offset = 0x100,
-
+ .nr_irqs = S3C64XX_NR_IRQS,
.init_irq = s3c6410_init_irq,
.map_io = real6410_map_io,
.init_machine = real6410_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-smartq5.c b/arch/arm/mach-s3c64xx/mach-smartq5.c
index 33224ab36fac..0972b6ce0ef6 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq5.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq5.c
@@ -21,6 +21,7 @@
#include <asm/mach/arch.h>
#include <video/samsung_fimd.h>
+#include <mach/irqs.h>
#include <mach/map.h>
#include <mach/regs-gpio.h>
#include <mach/gpio-samsung.h>
@@ -153,6 +154,7 @@ static void __init smartq5_machine_init(void)
MACHINE_START(SMARTQ5, "SmartQ 5")
/* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
.atag_offset = 0x100,
+ .nr_irqs = S3C64XX_NR_IRQS,
.init_irq = s3c6410_init_irq,
.map_io = smartq_map_io,
.init_machine = smartq5_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-smartq7.c b/arch/arm/mach-s3c64xx/mach-smartq7.c
index fc7fece22fb0..51ac1c6c654a 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq7.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq7.c
@@ -21,6 +21,7 @@
#include <asm/mach/arch.h>
#include <video/samsung_fimd.h>
+#include <mach/irqs.h>
#include <mach/map.h>
#include <mach/regs-gpio.h>
#include <mach/gpio-samsung.h>
@@ -169,6 +170,7 @@ static void __init smartq7_machine_init(void)
MACHINE_START(SMARTQ7, "SmartQ 7")
/* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
.atag_offset = 0x100,
+ .nr_irqs = S3C64XX_NR_IRQS,
.init_irq = s3c6410_init_irq,
.map_io = smartq_map_io,
.init_machine = smartq7_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c
index 6f425126a735..7d8a74fd8915 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6400.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c
@@ -27,6 +27,7 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
+#include <mach/irqs.h>
#include <mach/hardware.h>
#include <mach/map.h>
@@ -88,7 +89,7 @@ static void __init smdk6400_machine_init(void)
MACHINE_START(SMDK6400, "SMDK6400")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
.atag_offset = 0x100,
-
+ .nr_irqs = S3C64XX_NR_IRQS,
.init_irq = s3c6400_init_irq,
.map_io = smdk6400_map_io,
.init_machine = smdk6400_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index 30fd27853072..34d31bd48954 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -52,6 +52,7 @@
#include <asm/mach/irq.h>
#include <mach/hardware.h>
+#include <mach/irqs.h>
#include <mach/map.h>
#include <asm/irq.h>
@@ -707,7 +708,7 @@ static void __init smdk6410_machine_init(void)
MACHINE_START(SMDK6410, "SMDK6410")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
.atag_offset = 0x100,
-
+ .nr_irqs = S3C64XX_NR_IRQS,
.init_irq = s3c6410_init_irq,
.map_io = smdk6410_map_io,
.init_machine = smdk6410_machine_init,
diff --git a/arch/arm/plat-samsung/gpio-samsung.c b/arch/arm/plat-samsung/gpio-samsung.c
index 37faa8eab78f..287c3df8b4c6 100644
--- a/arch/arm/plat-samsung/gpio-samsung.c
+++ b/arch/arm/plat-samsung/gpio-samsung.c
@@ -30,6 +30,7 @@
#include <asm/irq.h>
+#include <mach/irqs.h>
#include <mach/map.h>
#include <mach/regs-gpio.h>
#include <mach/gpio-samsung.h>
--
2.1.0.rc2
WARNING: multiple messages have this Message-ID (diff)
From: arnd@arndb.de (Arnd Bergmann)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 05/10] ARM: s3c64xx: enable sparse IRQ support
Date: Wed, 25 Nov 2015 17:06:50 +0100 [thread overview]
Message-ID: <1448467615-447097-6-git-send-email-arnd@arndb.de> (raw)
In-Reply-To: <1448467615-447097-1-git-send-email-arnd@arndb.de>
This is another prerequisite for enabling multiplatform
support, and it is the part I am least certain about.
I assume it will cause the extra boot message "Cannot
allocate irq_descs @ IRQ%d, assuming pre-allocated" to
be printed, but otherwise work ok. This definitely needs
to be tested on real hardware to see if it works.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/Kconfig | 1 +
arch/arm/mach-s3c64xx/common.c | 1 +
arch/arm/mach-s3c64xx/dev-uart.c | 1 +
arch/arm/mach-s3c64xx/include/mach/irqs.h | 20 +++-----------------
arch/arm/mach-s3c64xx/include/mach/pm-core.h | 1 +
arch/arm/mach-s3c64xx/mach-anw6410.c | 3 ++-
arch/arm/mach-s3c64xx/mach-crag6410-module.c | 2 ++
arch/arm/mach-s3c64xx/mach-crag6410.c | 2 ++
arch/arm/mach-s3c64xx/mach-hmt.c | 2 ++
arch/arm/mach-s3c64xx/mach-mini6410.c | 2 ++
arch/arm/mach-s3c64xx/mach-ncp.c | 2 ++
arch/arm/mach-s3c64xx/mach-real6410.c | 3 ++-
arch/arm/mach-s3c64xx/mach-smartq5.c | 2 ++
arch/arm/mach-s3c64xx/mach-smartq7.c | 2 ++
arch/arm/mach-s3c64xx/mach-smdk6400.c | 3 ++-
arch/arm/mach-s3c64xx/mach-smdk6410.c | 3 ++-
arch/arm/plat-samsung/gpio-samsung.c | 1 +
17 files changed, 30 insertions(+), 21 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 83f42877328d..1ec6a153d8e5 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -649,6 +649,7 @@ config ARCH_S3C64XX
select SAMSUNG_ATAGS
select SAMSUNG_WAKEMASK
select SAMSUNG_WDT_RESET
+ select SPARSE_IRQ
help
Samsung S3C64XX series based systems
diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c
index 3dea4a4ef165..7c66ce1a6bb6 100644
--- a/arch/arm/mach-s3c64xx/common.c
+++ b/arch/arm/mach-s3c64xx/common.c
@@ -39,6 +39,7 @@
#include <asm/system_misc.h>
#include <mach/map.h>
+#include <mach/irqs.h>
#include <mach/hardware.h>
#include <mach/regs-gpio.h>
#include <mach/gpio-samsung.h>
diff --git a/arch/arm/mach-s3c64xx/dev-uart.c b/arch/arm/mach-s3c64xx/dev-uart.c
index 46e18d77ea93..a0b4f0329811 100644
--- a/arch/arm/mach-s3c64xx/dev-uart.c
+++ b/arch/arm/mach-s3c64xx/dev-uart.c
@@ -23,6 +23,7 @@
#include <asm/mach/irq.h>
#include <mach/hardware.h>
#include <mach/map.h>
+#include <mach/irqs.h>
#include <plat/devs.h>
diff --git a/arch/arm/mach-s3c64xx/include/mach/irqs.h b/arch/arm/mach-s3c64xx/include/mach/irqs.h
index 67bbd1dd04c2..3ceb00b5de07 100644
--- a/arch/arm/mach-s3c64xx/include/mach/irqs.h
+++ b/arch/arm/mach-s3c64xx/include/mach/irqs.h
@@ -156,25 +156,11 @@
#define IRQ_EINT_GROUP(group, no) (IRQ_EINT_GROUP##group##_BASE + (no))
-/* Define a group of interrupts for board-specific use (eg, for MFD
- * interrupt controllers). */
+/* Some boards have their own IRQs behind this */
#define IRQ_BOARD_START (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1)
-#ifdef CONFIG_MACH_WLF_CRAGG_6410
-#define IRQ_BOARD_NR 160
-#elif defined(CONFIG_SMDK6410_WM1190_EV1)
-#define IRQ_BOARD_NR 64
-#elif defined(CONFIG_SMDK6410_WM1192_EV1)
-#define IRQ_BOARD_NR 64
-#else
-#define IRQ_BOARD_NR 16
-#endif
-
-#define IRQ_BOARD_END (IRQ_BOARD_START + IRQ_BOARD_NR)
-
-/* Set the default NR_IRQS */
-
-#define NR_IRQS (IRQ_BOARD_END + 1)
+/* Set the default nr_irqs, boards can override if necessary */
+#define S3C64XX_NR_IRQS IRQ_BOARD_START
/* Compatibility */
diff --git a/arch/arm/mach-s3c64xx/include/mach/pm-core.h b/arch/arm/mach-s3c64xx/include/mach/pm-core.h
index a30a1e3ffc6a..32d2ff54f82d 100644
--- a/arch/arm/mach-s3c64xx/include/mach/pm-core.h
+++ b/arch/arm/mach-s3c64xx/include/mach/pm-core.h
@@ -18,6 +18,7 @@
#include <linux/serial_s3c.h>
#include <mach/regs-gpio.h>
+#include <mach/regs-clock.h>
static inline void s3c_pm_debug_init_uart(void)
{
diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c
index 6224c67f5061..347ce6009a8c 100644
--- a/arch/arm/mach-s3c64xx/mach-anw6410.c
+++ b/arch/arm/mach-s3c64xx/mach-anw6410.c
@@ -47,6 +47,7 @@
#include <plat/devs.h>
#include <plat/cpu.h>
+#include <mach/irqs.h>
#include <mach/regs-gpio.h>
#include <mach/gpio-samsung.h>
#include <plat/samsung-time.h>
@@ -229,7 +230,7 @@ static void __init anw6410_machine_init(void)
MACHINE_START(ANW6410, "A&W6410")
/* Maintainer: Kwangwoo Lee <kwangwoo.lee@gmail.com> */
.atag_offset = 0x100,
-
+ .nr_irqs = S3C64XX_NR_IRQS,
.init_irq = s3c6410_init_irq,
.map_io = anw6410_map_io,
.init_machine = anw6410_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
index be21f06e6b3f..571f95cc5a53 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
@@ -30,6 +30,8 @@
#include <linux/platform_data/spi-s3c64xx.h>
#include <plat/cpu.h>
+#include <mach/irqs.h>
+
#include "crag6410.h"
static struct s3c64xx_spi_csinfo wm0010_spi_csinfo = {
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index f776adcdaee8..a237b9b117b5 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -52,6 +52,7 @@
#include <mach/map.h>
#include <mach/regs-gpio.h>
#include <mach/gpio-samsung.h>
+#include <mach/irqs.h>
#include <plat/fb.h>
#include <plat/sdhci.h>
@@ -860,6 +861,7 @@ static void __init crag6410_machine_init(void)
MACHINE_START(WLF_CRAGG_6410, "Wolfson Cragganmore 6410")
/* Maintainer: Mark Brown <broonie@opensource.wolfsonmicro.com> */
.atag_offset = 0x100,
+ .nr_irqs = S3C64XX_NR_IRQS,
.init_irq = s3c6410_init_irq,
.map_io = crag6410_map_io,
.init_machine = crag6410_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c
index 816b39d1e6d1..bc7dc1fcbf7d 100644
--- a/arch/arm/mach-s3c64xx/mach-hmt.c
+++ b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -31,6 +31,7 @@
#include <video/samsung_fimd.h>
#include <mach/hardware.h>
#include <mach/map.h>
+#include <mach/irqs.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
@@ -279,6 +280,7 @@ static void __init hmt_machine_init(void)
MACHINE_START(HMT, "Airgoo-HMT")
/* Maintainer: Peter Korsgaard <jacmet@sunsite.dk> */
.atag_offset = 0x100,
+ .nr_irqs = S3C64XX_NR_IRQS,
.init_irq = s3c6410_init_irq,
.map_io = hmt_map_io,
.init_machine = hmt_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
index ab61af50bfb9..3ce5842ed51b 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -41,6 +41,7 @@
#include <linux/platform_data/mmc-sdhci-s3c.h>
#include <plat/sdhci.h>
#include <linux/platform_data/touchscreen-s3c2410.h>
+#include <mach/irqs.h>
#include <video/platform_lcd.h>
#include <video/samsung_fimd.h>
@@ -363,6 +364,7 @@ static void __init mini6410_machine_init(void)
MACHINE_START(MINI6410, "MINI6410")
/* Maintainer: Darius Augulis <augulis.darius@gmail.com> */
.atag_offset = 0x100,
+ .nr_irqs = S3C64XX_NR_IRQS,
.init_irq = s3c6410_init_irq,
.map_io = mini6410_map_io,
.init_machine = mini6410_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c
index 80cb1446f69f..23baaa04318c 100644
--- a/arch/arm/mach-s3c64xx/mach-ncp.c
+++ b/arch/arm/mach-s3c64xx/mach-ncp.c
@@ -31,6 +31,7 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
+#include <mach/irqs.h>
#include <mach/hardware.h>
#include <mach/map.h>
@@ -100,6 +101,7 @@ static void __init ncp_machine_init(void)
MACHINE_START(NCP, "NCP")
/* Maintainer: Samsung Electronics */
.atag_offset = 0x100,
+ .nr_irqs = S3C64XX_NR_IRQS,
.init_irq = s3c6410_init_irq,
.map_io = ncp_map_io,
.init_machine = ncp_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c
index 85fa9598b980..ca6548a1ed3b 100644
--- a/arch/arm/mach-s3c64xx/mach-real6410.c
+++ b/arch/arm/mach-s3c64xx/mach-real6410.c
@@ -33,6 +33,7 @@
#include <mach/map.h>
#include <mach/regs-gpio.h>
#include <mach/gpio-samsung.h>
+#include <mach/irqs.h>
#include <plat/adc.h>
#include <plat/cpu.h>
@@ -331,7 +332,7 @@ static void __init real6410_machine_init(void)
MACHINE_START(REAL6410, "REAL6410")
/* Maintainer: Darius Augulis <augulis.darius@gmail.com> */
.atag_offset = 0x100,
-
+ .nr_irqs = S3C64XX_NR_IRQS,
.init_irq = s3c6410_init_irq,
.map_io = real6410_map_io,
.init_machine = real6410_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-smartq5.c b/arch/arm/mach-s3c64xx/mach-smartq5.c
index 33224ab36fac..0972b6ce0ef6 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq5.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq5.c
@@ -21,6 +21,7 @@
#include <asm/mach/arch.h>
#include <video/samsung_fimd.h>
+#include <mach/irqs.h>
#include <mach/map.h>
#include <mach/regs-gpio.h>
#include <mach/gpio-samsung.h>
@@ -153,6 +154,7 @@ static void __init smartq5_machine_init(void)
MACHINE_START(SMARTQ5, "SmartQ 5")
/* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
.atag_offset = 0x100,
+ .nr_irqs = S3C64XX_NR_IRQS,
.init_irq = s3c6410_init_irq,
.map_io = smartq_map_io,
.init_machine = smartq5_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-smartq7.c b/arch/arm/mach-s3c64xx/mach-smartq7.c
index fc7fece22fb0..51ac1c6c654a 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq7.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq7.c
@@ -21,6 +21,7 @@
#include <asm/mach/arch.h>
#include <video/samsung_fimd.h>
+#include <mach/irqs.h>
#include <mach/map.h>
#include <mach/regs-gpio.h>
#include <mach/gpio-samsung.h>
@@ -169,6 +170,7 @@ static void __init smartq7_machine_init(void)
MACHINE_START(SMARTQ7, "SmartQ 7")
/* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
.atag_offset = 0x100,
+ .nr_irqs = S3C64XX_NR_IRQS,
.init_irq = s3c6410_init_irq,
.map_io = smartq_map_io,
.init_machine = smartq7_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c
index 6f425126a735..7d8a74fd8915 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6400.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c
@@ -27,6 +27,7 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
+#include <mach/irqs.h>
#include <mach/hardware.h>
#include <mach/map.h>
@@ -88,7 +89,7 @@ static void __init smdk6400_machine_init(void)
MACHINE_START(SMDK6400, "SMDK6400")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
.atag_offset = 0x100,
-
+ .nr_irqs = S3C64XX_NR_IRQS,
.init_irq = s3c6400_init_irq,
.map_io = smdk6400_map_io,
.init_machine = smdk6400_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index 30fd27853072..34d31bd48954 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -52,6 +52,7 @@
#include <asm/mach/irq.h>
#include <mach/hardware.h>
+#include <mach/irqs.h>
#include <mach/map.h>
#include <asm/irq.h>
@@ -707,7 +708,7 @@ static void __init smdk6410_machine_init(void)
MACHINE_START(SMDK6410, "SMDK6410")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
.atag_offset = 0x100,
-
+ .nr_irqs = S3C64XX_NR_IRQS,
.init_irq = s3c6410_init_irq,
.map_io = smdk6410_map_io,
.init_machine = smdk6410_machine_init,
diff --git a/arch/arm/plat-samsung/gpio-samsung.c b/arch/arm/plat-samsung/gpio-samsung.c
index 37faa8eab78f..287c3df8b4c6 100644
--- a/arch/arm/plat-samsung/gpio-samsung.c
+++ b/arch/arm/plat-samsung/gpio-samsung.c
@@ -30,6 +30,7 @@
#include <asm/irq.h>
+#include <mach/irqs.h>
#include <mach/map.h>
#include <mach/regs-gpio.h>
#include <mach/gpio-samsung.h>
--
2.1.0.rc2
next prev parent reply other threads:[~2015-11-25 16:07 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-25 16:06 [PATCH 00/10] ARM: s3c64xx multiplatform Arnd Bergmann
2015-11-25 16:06 ` Arnd Bergmann
2015-11-25 16:06 ` [PATCH 01/10] Input: s3c2410_ts: fix S3C_ADC dependency Arnd Bergmann
2015-11-25 16:06 ` Arnd Bergmann
2015-11-25 16:06 ` Arnd Bergmann
2015-11-30 23:48 ` Krzysztof Kozlowski
2015-11-30 23:48 ` Krzysztof Kozlowski
2015-11-25 16:06 ` [PATCH 02/10] ASoC: samsung/smartq: use dynamic registration Arnd Bergmann
2015-11-25 16:06 ` Arnd Bergmann
2015-12-01 0:24 ` Krzysztof Kozlowski
2015-12-01 0:24 ` Krzysztof Kozlowski
2015-12-01 15:11 ` Arnd Bergmann
2015-12-01 15:11 ` Arnd Bergmann
2015-11-25 16:06 ` [PATCH 03/10] gpio: samsung: move gpio-samsung driver back to platform code Arnd Bergmann
2015-11-25 16:06 ` Arnd Bergmann
2015-12-01 0:34 ` Krzysztof Kozlowski
2015-12-01 0:34 ` Krzysztof Kozlowski
2015-12-01 15:33 ` Arnd Bergmann
2015-12-01 15:33 ` Arnd Bergmann
2015-11-25 16:06 ` [PATCH 04/10] ARM: s3c64xx: prepare initcalls for multiplatform Arnd Bergmann
2015-11-25 16:06 ` Arnd Bergmann
2015-12-01 1:23 ` Krzysztof Kozlowski
2015-12-01 1:23 ` Krzysztof Kozlowski
2015-11-25 16:06 ` Arnd Bergmann [this message]
2015-11-25 16:06 ` [PATCH 05/10] ARM: s3c64xx: enable sparse IRQ support Arnd Bergmann
2015-11-25 16:06 ` [PATCH 06/10] iio: exynos-adc: add experimental touchscreen support Arnd Bergmann
2015-11-25 16:06 ` Arnd Bergmann
2015-11-25 16:06 ` [PATCH 07/10] ARM: s3c64xx: use new adc/touchscreen driver Arnd Bergmann
2015-11-25 16:06 ` Arnd Bergmann
2015-11-25 16:06 ` Arnd Bergmann
2015-11-25 16:06 ` [PATCH 08/10] ARM: s3c64xx: use common debug-ll implementation Arnd Bergmann
2015-11-25 16:06 ` Arnd Bergmann
2015-11-25 16:06 ` [PATCH 09/10] ARM: s3c64xx: multiplatform support Arnd Bergmann
2015-11-25 16:06 ` Arnd Bergmann
2015-11-25 16:06 ` [PATCH 10/10] ARM: s3c64xx: allow building without board support Arnd Bergmann
2015-11-25 16:06 ` Arnd Bergmann
2015-11-25 16:06 ` Arnd Bergmann
2015-11-25 16:31 ` [PATCH 00/10] ARM: s3c64xx multiplatform Mark Brown
2015-11-25 16:31 ` Mark Brown
2015-11-25 16:33 ` Arnd Bergmann
2015-11-25 16:33 ` Arnd Bergmann
-- strict thread matches above, loose matches on Subject: below --
2015-03-02 12:35 [PATCH 00/10] ARM: s3c64xx multiplatform, help needed Arnd Bergmann
2015-03-02 12:35 ` [PATCH 05/10] ARM: s3c64xx: enable sparse IRQ support Arnd Bergmann
2015-03-02 12:35 ` Arnd Bergmann
2015-03-06 17:43 ` Charles Keepax
2015-03-06 17:43 ` Charles Keepax
2015-03-08 18:56 ` Mark Brown
2015-03-08 18:56 ` Mark Brown
2015-03-08 21:42 ` Arnd Bergmann
2015-03-08 21:42 ` Arnd Bergmann
2015-03-18 0:02 ` Mark Brown
2015-03-18 0:02 ` Mark Brown
2015-03-21 16:38 ` Charles Keepax
2015-03-21 16:38 ` Charles Keepax
2015-03-21 18:22 ` Mark Brown
2015-03-21 18:22 ` Mark Brown
2015-03-22 2:54 ` Arnd Bergmann
2015-03-22 2:54 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1448467615-447097-6-git-send-email-arnd@arndb.de \
--to=arnd@arndb.de \
--cc=anarsoul@gmail.com \
--cc=ben.dooks@codethink.co.uk \
--cc=broonie@kernel.org \
--cc=ckeepax@opensource.wolfsonmicro.com \
--cc=k.kozlowski@samsung.com \
--cc=kgene@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=tfiga@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.