From: Dawei Chien <dawei.chien@mediatek.com>
To: Viresh Kumar <viresh.kumar@linaro.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>,
Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>,
Matthias Brugger <matthias.bgg@gmail.com>,
Daniel Kurtz <djkurtz@chromium.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Dawei Chien <dawei.chien@mediatek.com>,
<devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <linux-pm@vger.kernel.org>,
<linux-mediatek@lists.infradead.org>,
<srv_heupstream@mediatek.com>,
Sascha Hauer <kernel@pengutronix.de>,
Punit Agrawal <punit.agrawal@arm.com>
Subject: [PATCH v5 3/3] arm64: dts: mt8173: Add dynamic power node.
Date: Wed, 16 Dec 2015 11:59:16 +0800 [thread overview]
Message-ID: <1450238356-36319-4-git-send-email-dawei.chien@mediatek.com> (raw)
In-Reply-To: <1450238356-36319-1-git-send-email-dawei.chien@mediatek.com>
This device node is for calculating dynamic power in mW.
Since mt8173 has two clusters, there are two dynamic power
coefficient as well.
Signed-off-by: Dawei Chien <dawei.chien@mediatek.com>
---
This patch is base on patchset:
https://lkml.org/lkml/2015/11/17/251
---
arch/arm64/boot/dts/mediatek/mt8173.dtsi | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 4114cee..33fabe4 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -71,6 +71,7 @@
#cooling-cells = <2>;
#cooling-min-level = <0>;
#cooling-max-level = <7>;
+ dynamic-power-coefficient = <263>;
};
cpu1: cpu@1 {
@@ -95,6 +96,7 @@
#cooling-cells = <2>;
#cooling-min-level = <0>;
#cooling-max-level = <7>;
+ dynamic-power-coefficient = <263>;
};
cpu2: cpu@100 {
@@ -119,6 +121,7 @@
#cooling-cells = <2>;
#cooling-min-level = <0>;
#cooling-max-level = <7>;
+ dynamic-power-coefficient = <530>;
};
cpu3: cpu@101 {
@@ -143,6 +146,7 @@
#cooling-cells = <2>;
#cooling-min-level = <0>;
#cooling-max-level = <7>;
+ dynamic-power-coefficient = <530>;
};
idle-states {
--
1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: Dawei Chien <dawei.chien@mediatek.com>
To: Viresh Kumar <viresh.kumar@linaro.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>,
Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>,
Matthias Brugger <matthias.bgg@gmail.com>,
Daniel Kurtz <djkurtz@chromium.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Dawei Chien <dawei.chien@mediatek.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org,
linux-mediatek@lists.infradead.org, srv_heupstream@mediatek.com,
Sascha Hauer <kernel@pengutronix.de>,
Punit Agrawal <punit.agrawal@arm.com>
Subject: [PATCH v5 3/3] arm64: dts: mt8173: Add dynamic power node.
Date: Wed, 16 Dec 2015 11:59:16 +0800 [thread overview]
Message-ID: <1450238356-36319-4-git-send-email-dawei.chien@mediatek.com> (raw)
In-Reply-To: <1450238356-36319-1-git-send-email-dawei.chien@mediatek.com>
This device node is for calculating dynamic power in mW.
Since mt8173 has two clusters, there are two dynamic power
coefficient as well.
Signed-off-by: Dawei Chien <dawei.chien@mediatek.com>
---
This patch is base on patchset:
https://lkml.org/lkml/2015/11/17/251
---
arch/arm64/boot/dts/mediatek/mt8173.dtsi | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 4114cee..33fabe4 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -71,6 +71,7 @@
#cooling-cells = <2>;
#cooling-min-level = <0>;
#cooling-max-level = <7>;
+ dynamic-power-coefficient = <263>;
};
cpu1: cpu@1 {
@@ -95,6 +96,7 @@
#cooling-cells = <2>;
#cooling-min-level = <0>;
#cooling-max-level = <7>;
+ dynamic-power-coefficient = <263>;
};
cpu2: cpu@100 {
@@ -119,6 +121,7 @@
#cooling-cells = <2>;
#cooling-min-level = <0>;
#cooling-max-level = <7>;
+ dynamic-power-coefficient = <530>;
};
cpu3: cpu@101 {
@@ -143,6 +146,7 @@
#cooling-cells = <2>;
#cooling-min-level = <0>;
#cooling-max-level = <7>;
+ dynamic-power-coefficient = <530>;
};
idle-states {
--
1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: dawei.chien@mediatek.com (Dawei Chien)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 3/3] arm64: dts: mt8173: Add dynamic power node.
Date: Wed, 16 Dec 2015 11:59:16 +0800 [thread overview]
Message-ID: <1450238356-36319-4-git-send-email-dawei.chien@mediatek.com> (raw)
In-Reply-To: <1450238356-36319-1-git-send-email-dawei.chien@mediatek.com>
This device node is for calculating dynamic power in mW.
Since mt8173 has two clusters, there are two dynamic power
coefficient as well.
Signed-off-by: Dawei Chien <dawei.chien@mediatek.com>
---
This patch is base on patchset:
https://lkml.org/lkml/2015/11/17/251
---
arch/arm64/boot/dts/mediatek/mt8173.dtsi | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 4114cee..33fabe4 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -71,6 +71,7 @@
#cooling-cells = <2>;
#cooling-min-level = <0>;
#cooling-max-level = <7>;
+ dynamic-power-coefficient = <263>;
};
cpu1: cpu at 1 {
@@ -95,6 +96,7 @@
#cooling-cells = <2>;
#cooling-min-level = <0>;
#cooling-max-level = <7>;
+ dynamic-power-coefficient = <263>;
};
cpu2: cpu at 100 {
@@ -119,6 +121,7 @@
#cooling-cells = <2>;
#cooling-min-level = <0>;
#cooling-max-level = <7>;
+ dynamic-power-coefficient = <530>;
};
cpu3: cpu at 101 {
@@ -143,6 +146,7 @@
#cooling-cells = <2>;
#cooling-min-level = <0>;
#cooling-max-level = <7>;
+ dynamic-power-coefficient = <530>;
};
idle-states {
--
1.7.9.5
next prev parent reply other threads:[~2015-12-16 3:59 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-16 3:59 [PATCH v5 0/3] thermal: mediatek: Add cpu dynamic power cooling model Dawei Chien
2015-12-16 3:59 ` Dawei Chien
2015-12-16 3:59 ` Dawei Chien
2015-12-16 3:59 ` [PATCH v5 1/3] " Dawei Chien
2015-12-16 3:59 ` Dawei Chien
2015-12-16 3:59 ` Dawei Chien
2015-12-16 3:59 ` [PATCH v5 2/3] arm64: dts: mt8173: Add thermal zone node Dawei Chien
2015-12-16 3:59 ` Dawei Chien
2015-12-16 3:59 ` Dawei Chien
2015-12-16 8:34 ` Daniel Kurtz
2015-12-16 8:34 ` Daniel Kurtz
2015-12-16 8:34 ` Daniel Kurtz
2015-12-16 10:09 ` dawei chien
2015-12-16 10:09 ` dawei chien
2015-12-16 10:09 ` dawei chien
2015-12-16 11:22 ` Daniel Kurtz
2015-12-16 11:22 ` Daniel Kurtz
2015-12-16 11:22 ` Daniel Kurtz
2015-12-16 12:12 ` dawei chien
2015-12-16 12:12 ` dawei chien
2015-12-16 12:12 ` dawei chien
2015-12-16 3:59 ` Dawei Chien [this message]
2015-12-16 3:59 ` [PATCH v5 3/3] arm64: dts: mt8173: Add dynamic power node Dawei Chien
2015-12-16 3:59 ` Dawei Chien
2015-12-16 4:14 ` [PATCH v5 0/3] thermal: mediatek: Add cpu dynamic power cooling model Viresh Kumar
2015-12-16 4:14 ` Viresh Kumar
2015-12-16 4:14 ` Viresh Kumar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1450238356-36319-4-git-send-email-dawei.chien@mediatek.com \
--to=dawei.chien@mediatek.com \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=djkurtz@chromium.org \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-pm@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=matthias.bgg@gmail.com \
--cc=pawel.moll@arm.com \
--cc=punit.agrawal@arm.com \
--cc=rjw@rjwysocki.net \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=srv_heupstream@mediatek.com \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.