All of lore.kernel.org
 help / color / mirror / Atom feed
From: Daniel Lezcano <daniel.lezcano@linaro.org>
To: tglx@linutronix.de
Cc: linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, mingo@kernel.org,
	Yoshinori Sato <ysato@users.sourceforge.jp>,
	uclinux-h8-devel@lists.sourceforge.jp (moderated list:H8/300
	ARCHITECTURE)
Subject: [PATCH 37/69] clocksource/drivers/h8300: Cleanup startup and remove module code.
Date: Fri, 18 Dec 2015 15:17:50 +0100	[thread overview]
Message-ID: <1450448302-27429-37-git-send-email-daniel.lezcano@linaro.org> (raw)
In-Reply-To: <1450448302-27429-1-git-send-email-daniel.lezcano@linaro.org>

From: Yoshinori Sato <ysato@users.sourceforge.jp>

Remove some legacy code and replace it by the clksrc-of code.

Do some cleanup and code consolidation.

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/h8300_timer16.c | 141 +++++++++++++--------------------
 drivers/clocksource/h8300_timer8.c  | 150 ++++++++++++------------------------
 drivers/clocksource/h8300_tpu.c     | 117 ++++++++++------------------
 3 files changed, 144 insertions(+), 264 deletions(-)

diff --git a/drivers/clocksource/h8300_timer16.c b/drivers/clocksource/h8300_timer16.c
index 0e076c6..cdf0d83 100644
--- a/drivers/clocksource/h8300_timer16.c
+++ b/drivers/clocksource/h8300_timer16.c
@@ -17,6 +17,8 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 
 #include <asm/segment.h>
 #include <asm/irq.h>
@@ -47,9 +49,7 @@
 #define ABSOLUTE 1
 
 struct timer16_priv {
-	struct platform_device *pdev;
 	struct clocksource cs;
-	struct irqaction irqaction;
 	unsigned long total_cycles;
 	unsigned long mapbase;
 	unsigned long mapcommon;
@@ -144,110 +144,77 @@ static void timer16_disable(struct clocksource *cs)
 	p->cs_enabled = false;
 }
 
+static struct timer16_priv timer16_priv = {
+	.cs = {
+		.name = "h8300_16timer",
+		.rating = 200,
+		.read = timer16_clocksource_read,
+		.enable = timer16_enable,
+		.disable = timer16_disable,
+		.mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8),
+		.flags = CLOCK_SOURCE_IS_CONTINUOUS,
+	},
+};
+
 #define REG_CH   0
 #define REG_COMM 1
 
-static int timer16_setup(struct timer16_priv *p, struct platform_device *pdev)
+static void __init h8300_16timer_init(struct device_node *node)
 {
-	struct resource *res[2];
+	void __iomem *base[2];
 	int ret, irq;
 	unsigned int ch;
+	struct clk *clk;
 
-	p->pdev = pdev;
-
-	res[REG_CH] = platform_get_resource(p->pdev,
-					    IORESOURCE_MEM, REG_CH);
-	res[REG_COMM] = platform_get_resource(p->pdev,
-					      IORESOURCE_MEM, REG_COMM);
-	if (!res[REG_CH] || !res[REG_COMM]) {
-		dev_err(&p->pdev->dev, "failed to get I/O memory\n");
-		return -ENXIO;
-	}
-	irq = platform_get_irq(p->pdev, 0);
-	if (irq < 0) {
-		dev_err(&p->pdev->dev, "failed to get irq\n");
-		return irq;
+	clk = of_clk_get(node, 0);
+	if (IS_ERR(clk)) {
+		pr_err("failed to get clock for clocksource\n");
+		return;
 	}
 
-	p->clk = clk_get(&p->pdev->dev, "fck");
-	if (IS_ERR(p->clk)) {
-		dev_err(&p->pdev->dev, "can't get clk\n");
-		return PTR_ERR(p->clk);
+	base[REG_CH] = of_iomap(node, 0);
+	if (!base[REG_CH]) {
+		pr_err("failed to map registers for clocksource\n");
+		goto free_clk;
 	}
-	of_property_read_u32(p->pdev->dev.of_node, "renesas,channel", &ch);
-
-	p->pdev = pdev;
-	p->mapbase = res[REG_CH]->start;
-	p->mapcommon = res[REG_COMM]->start;
-	p->enb = 1 << ch;
-	p->imfa = 1 << ch;
-	p->imiea = 1 << (4 + ch);
-	p->cs.name = pdev->name;
-	p->cs.rating = 200;
-	p->cs.read = timer16_clocksource_read;
-	p->cs.enable = timer16_enable;
-	p->cs.disable = timer16_disable;
-	p->cs.mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8);
-	p->cs.flags = CLOCK_SOURCE_IS_CONTINUOUS;
 
-	ret = request_irq(irq, timer16_interrupt,
-			  IRQF_TIMER, pdev->name, p);
-	if (ret < 0) {
-		dev_err(&p->pdev->dev, "failed to request irq %d\n", irq);
-		return ret;
+	base[REG_COMM] = of_iomap(node, 1);
+	if (!base[REG_COMM]) {
+		pr_err("failed to map registers for clocksource\n");
+		goto unmap_ch;
 	}
 
-	clocksource_register_hz(&p->cs, clk_get_rate(p->clk) / 8);
-
-	return 0;
-}
-
-static int timer16_probe(struct platform_device *pdev)
-{
-	struct timer16_priv *p = platform_get_drvdata(pdev);
-
-	if (p) {
-		dev_info(&pdev->dev, "kept as earlytimer\n");
-		return 0;
+	irq = irq_of_parse_and_map(node, 0);
+	if (irq < 0) {
+		pr_err("failed to get irq for clockevent\n");
+		goto unmap_comm;
 	}
 
-	p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
-	if (!p)
-		return -ENOMEM;
+	of_property_read_u32(node, "renesas,channel", &ch);
 
-	return timer16_setup(p, pdev);
-}
+	timer16_priv.mapbase = (unsigned long)base[REG_CH];
+	timer16_priv.mapcommon = (unsigned long)base[REG_COMM];
+	timer16_priv.enb = 1 << ch;
+	timer16_priv.imfa = 1 << ch;
+	timer16_priv.imiea = 1 << (4 + ch);
 
-static int timer16_remove(struct platform_device *pdev)
-{
-	return -EBUSY;
-}
-
-static const struct of_device_id timer16_of_table[] = {
-	{ .compatible = "renesas,16bit-timer" },
-	{ }
-};
-static struct platform_driver timer16_driver = {
-	.probe		= timer16_probe,
-	.remove		= timer16_remove,
-	.driver		= {
-		.name	= "h8300h-16timer",
-		.of_match_table = of_match_ptr(timer16_of_table),
+	ret = request_irq(irq, timer16_interrupt,
+			  IRQF_TIMER, timer16_priv.cs.name, &timer16_priv);
+	if (ret < 0) {
+		pr_err("failed to request irq %d of clocksource\n", irq);
+		goto unmap_comm;
 	}
-};
 
-static int __init timer16_init(void)
-{
-	return platform_driver_register(&timer16_driver);
-}
+	clocksource_register_hz(&timer16_priv.cs,
+				clk_get_rate(timer16_priv.clk) / 8);
+	return;
 
-static void __exit timer16_exit(void)
-{
-	platform_driver_unregister(&timer16_driver);
+unmap_comm:
+	iounmap(base[REG_COMM]);
+unmap_ch:
+	iounmap(base[REG_CH]);
+free_clk:
+	clk_put(clk);
 }
 
-subsys_initcall(timer16_init);
-module_exit(timer16_exit);
-MODULE_AUTHOR("Yoshinori Sato");
-MODULE_DESCRIPTION("H8/300H 16bit Timer Driver");
-MODULE_LICENSE("GPL v2");
+CLOCKSOURCE_OF_DECLARE(h8300_16bit, "renesas,16bit-timer", h8300_16timer_init);
diff --git a/drivers/clocksource/h8300_timer8.c b/drivers/clocksource/h8300_timer8.c
index 44375d8..f0680eb 100644
--- a/drivers/clocksource/h8300_timer8.c
+++ b/drivers/clocksource/h8300_timer8.c
@@ -12,13 +12,14 @@
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
 #include <linux/init.h>
-#include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/clockchips.h>
 #include <linux/module.h>
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 
 #include <asm/irq.h>
 
@@ -39,10 +40,10 @@
 #define RELATIVE 0
 #define ABSOLUTE 1
 
+#define SCALE 64
+
 struct timer8_priv {
-	struct platform_device *pdev;
 	struct clock_event_device ced;
-	struct irqaction irqaction;
 	unsigned long mapbase;
 	raw_spinlock_t lock;
 	unsigned long flags;
@@ -111,7 +112,7 @@ static void timer8_set_next(struct timer8_priv *p, unsigned long delta)
 
 static int timer8_enable(struct timer8_priv *p)
 {
-	p->rate = clk_get_rate(p->pclk) / 64;
+	p->rate = clk_get_rate(p->pclk) / SCALE;
 	ctrl_outw(0xffff, p->mapbase + TCORA);
 	ctrl_outw(0x0000, p->mapbase + _8TCNT);
 	ctrl_outw(0x0c02, p->mapbase + _8TCR);
@@ -179,7 +180,7 @@ static int timer8_clock_event_periodic(struct clock_event_device *ced)
 {
 	struct timer8_priv *p = ced_to_priv(ced);
 
-	dev_info(&p->pdev->dev, "used for periodic clock events\n");
+	pr_info("%s: used for periodic clock events\n", ced->name);
 	timer8_stop(p);
 	timer8_clock_event_start(p, PERIODIC);
 
@@ -190,7 +191,7 @@ static int timer8_clock_event_oneshot(struct clock_event_device *ced)
 {
 	struct timer8_priv *p = ced_to_priv(ced);
 
-	dev_info(&p->pdev->dev, "used for oneshot clock events\n");
+	pr_info("%s: used for oneshot clock events\n", ced->name);
 	timer8_stop(p);
 	timer8_clock_event_start(p, ONESHOT);
 
@@ -208,110 +209,61 @@ static int timer8_clock_event_next(unsigned long delta,
 	return 0;
 }
 
-static int timer8_setup(struct timer8_priv *p,
-			struct platform_device *pdev)
+static struct timer8_priv timer8_priv = {
+	.ced = {
+		.name = "h8300_8timer",
+		.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+		.rating = 200,
+		.set_next_event = timer8_clock_event_next,
+		.set_state_shutdown = timer8_clock_event_shutdown,
+		.set_state_periodic = timer8_clock_event_periodic,
+		.set_state_oneshot = timer8_clock_event_oneshot,
+	},
+};
+
+static void __init h8300_8timer_init(struct device_node *node)
 {
-	struct resource *res;
+	void __iomem *base;
 	int irq;
-	int ret;
+	int ret = 0;
+	int rate;
+	struct clk *clk;
 
-	p->pdev = pdev;
+	clk = of_clk_get(node, 0);
+	if (IS_ERR(clk)) {
+		pr_err("failed to get clock for clockevent\n");
+		return;
+	}
 
-	res = platform_get_resource(p->pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(&p->pdev->dev, "failed to get I/O memory\n");
-		return -ENXIO;
+	base = of_iomap(node, 0);
+	if (!base) {
+		pr_err("failed to map registers for clockevent\n");
+		goto free_clk;
 	}
 
-	irq = platform_get_irq(p->pdev, 0);
+	irq = irq_of_parse_and_map(node, 0);
 	if (irq < 0) {
-		dev_err(&p->pdev->dev, "failed to get irq\n");
-		return -ENXIO;
+		pr_err("failed to get irq for clockevent\n");
+		goto unmap_reg;
 	}
 
-	p->mapbase = res->start;
-
-	p->irqaction.name = dev_name(&p->pdev->dev);
-	p->irqaction.handler = timer8_interrupt;
-	p->irqaction.dev_id = p;
-	p->irqaction.flags = IRQF_TIMER;
-
-	p->pclk = clk_get(&p->pdev->dev, "fck");
-	if (IS_ERR(p->pclk)) {
-		dev_err(&p->pdev->dev, "can't get clk\n");
-		return PTR_ERR(p->pclk);
-	}
+	timer8_priv.mapbase = (unsigned long)base;
+	timer8_priv.pclk = clk;
 
-	p->ced.name = pdev->name;
-	p->ced.features = CLOCK_EVT_FEAT_PERIODIC |
-		CLOCK_EVT_FEAT_ONESHOT;
-	p->ced.rating = 200;
-	p->ced.cpumask = cpumask_of(0);
-	p->ced.set_next_event = timer8_clock_event_next;
-	p->ced.set_state_shutdown = timer8_clock_event_shutdown;
-	p->ced.set_state_periodic = timer8_clock_event_periodic;
-	p->ced.set_state_oneshot = timer8_clock_event_oneshot;
-
-	ret = setup_irq(irq, &p->irqaction);
+	ret = request_irq(irq, timer8_interrupt,
+			  IRQF_TIMER, timer8_priv.ced.name, &timer8_priv);
 	if (ret < 0) {
-		dev_err(&p->pdev->dev,
-			"failed to request irq %d\n", irq);
-		return ret;
+		pr_err("failed to request irq %d for clockevent\n", irq);
+		goto unmap_reg;
 	}
-	clockevents_register_device(&p->ced);
-	platform_set_drvdata(pdev, p);
-
-	return 0;
-}
-
-static int timer8_probe(struct platform_device *pdev)
-{
-	struct timer8_priv *p = platform_get_drvdata(pdev);
-
-	if (p) {
-		dev_info(&pdev->dev, "kept as earlytimer\n");
-		return 0;
-	}
-
-	p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
-	if (!p)
-		return -ENOMEM;
-
-	return timer8_setup(p, pdev);
-}
-
-static int timer8_remove(struct platform_device *pdev)
-{
-	return -EBUSY;
-}
-
-static const struct of_device_id timer8_of_table[] __maybe_unused = {
-	{ .compatible = "renesas,8bit-timer" },
-	{ }
-};
-
-MODULE_DEVICE_TABLE(of, timer8_of_table);
-static struct platform_driver timer8_driver = {
-	.probe		= timer8_probe,
-	.remove		= timer8_remove,
-	.driver		= {
-		.name	= "h8300-8timer",
-		.of_match_table = of_match_ptr(timer8_of_table),
-	}
-};
-
-static int __init timer8_init(void)
-{
-	return platform_driver_register(&timer8_driver);
-}
-
-static void __exit timer8_exit(void)
-{
-	platform_driver_unregister(&timer8_driver);
+	rate = clk_get_rate(clk) / SCALE;
+	clockevents_config_and_register(&timer8_priv.ced, rate, 1, 0x0000ffff);
+	return;
+
+unmap_reg:
+	iounmap(base);
+free_clk:
+	clk_put(clk);
 }
 
-subsys_initcall(timer8_init);
-module_exit(timer8_exit);
-MODULE_AUTHOR("Yoshinori Sato");
-MODULE_DESCRIPTION("H8/300 8bit Timer Driver");
-MODULE_LICENSE("GPL v2");
+CLOCKSOURCE_OF_DECLARE(h8300_8bit, "renesas,8bit-timer", h8300_8timer_init);
diff --git a/drivers/clocksource/h8300_tpu.c b/drivers/clocksource/h8300_tpu.c
index 5487410..ed0b493 100644
--- a/drivers/clocksource/h8300_tpu.c
+++ b/drivers/clocksource/h8300_tpu.c
@@ -1,5 +1,5 @@
 /*
- *  H8/300 TPU Driver
+ *  H8S TPU Driver
  *
  *  Copyright 2015 Yoshinori Sato <ysato@users.sourcefoge.jp>
  *
@@ -17,8 +17,8 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/of.h>
-
-#include <asm/irq.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 
 #define TCR	0
 #define TMDR	1
@@ -32,9 +32,7 @@
 #define TGRD	14
 
 struct tpu_priv {
-	struct platform_device *pdev;
 	struct clocksource cs;
-	struct clk *clk;
 	unsigned long mapbase1;
 	unsigned long mapbase2;
 	raw_spinlock_t lock;
@@ -116,91 +114,54 @@ static void tpu_clocksource_disable(struct clocksource *cs)
 	p->cs_enabled = false;
 }
 
+static struct tpu_priv tpu_priv = {
+	.cs = {
+		.name = "H8S_TPU",
+		.rating = 200,
+		.read = tpu_clocksource_read,
+		.enable = tpu_clocksource_enable,
+		.disable = tpu_clocksource_disable,
+		.mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8),
+		.flags = CLOCK_SOURCE_IS_CONTINUOUS,
+	},
+};
+
 #define CH_L 0
 #define CH_H 1
 
-static int __init tpu_setup(struct tpu_priv *p, struct platform_device *pdev)
+static void __init h8300_tpu_init(struct device_node *node)
 {
-	struct resource *res[2];
-
-	p->pdev = pdev;
+	void __iomem *base[2];
+	struct clk *clk;
 
-	res[CH_L] = platform_get_resource(p->pdev, IORESOURCE_MEM, CH_L);
-	res[CH_H] = platform_get_resource(p->pdev, IORESOURCE_MEM, CH_H);
-	if (!res[CH_L] || !res[CH_H]) {
-		dev_err(&p->pdev->dev, "failed to get I/O memory\n");
-		return -ENXIO;
+	clk = of_clk_get(node, 0);
+	if (IS_ERR(clk)) {
+		pr_err("failed to get clock for clocksource\n");
+		return;
 	}
 
-	p->clk = clk_get(&p->pdev->dev, "fck");
-	if (IS_ERR(p->clk)) {
-		dev_err(&p->pdev->dev, "can't get clk\n");
-		return PTR_ERR(p->clk);
+	base[CH_L] = of_iomap(node, CH_L);
+	if (!base[CH_L]) {
+		pr_err("failed to map registers for clocksource\n");
+		goto free_clk;
 	}
-
-	p->mapbase1 = res[CH_L]->start;
-	p->mapbase2 = res[CH_H]->start;
-
-	p->cs.name = pdev->name;
-	p->cs.rating = 200;
-	p->cs.read = tpu_clocksource_read;
-	p->cs.enable = tpu_clocksource_enable;
-	p->cs.disable = tpu_clocksource_disable;
-	p->cs.mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8);
-	p->cs.flags = CLOCK_SOURCE_IS_CONTINUOUS;
-	clocksource_register_hz(&p->cs, clk_get_rate(p->clk) / 64);
-	platform_set_drvdata(pdev, p);
-
-	return 0;
-}
-
-static int tpu_probe(struct platform_device *pdev)
-{
-	struct tpu_priv *p = platform_get_drvdata(pdev);
-
-	if (p) {
-		dev_info(&pdev->dev, "kept as earlytimer\n");
-		return 0;
+	base[CH_H] = of_iomap(node, CH_H);
+	if (!base[CH_H]) {
+		pr_err("failed to map registers for clocksource\n");
+		goto unmap_L;
 	}
 
-	p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
-	if (!p)
-		return -ENOMEM;
+	tpu_priv.mapbase1 = (unsigned long)base[CH_L];
+	tpu_priv.mapbase2 = (unsigned long)base[CH_H];
 
-	return tpu_setup(p, pdev);
-}
+	clocksource_register_hz(&tpu_priv.cs, clk_get_rate(clk) / 64);
 
-static int tpu_remove(struct platform_device *pdev)
-{
-	return -EBUSY;
-}
+	return;
 
-static const struct of_device_id tpu_of_table[] = {
-	{ .compatible = "renesas,tpu" },
-	{ }
-};
-
-static struct platform_driver tpu_driver = {
-	.probe		= tpu_probe,
-	.remove		= tpu_remove,
-	.driver		= {
-		.name	= "h8s-tpu",
-		.of_match_table = of_match_ptr(tpu_of_table),
-	}
-};
-
-static int __init tpu_init(void)
-{
-	return platform_driver_register(&tpu_driver);
-}
-
-static void __exit tpu_exit(void)
-{
-	platform_driver_unregister(&tpu_driver);
+unmap_L:
+	iounmap(base[CH_H]);
+free_clk:
+	clk_put(clk);
 }
 
-subsys_initcall(tpu_init);
-module_exit(tpu_exit);
-MODULE_AUTHOR("Yoshinori Sato");
-MODULE_DESCRIPTION("H8S Timer Pulse Unit Driver");
-MODULE_LICENSE("GPL v2");
+CLOCKSOURCE_OF_DECLARE(h8300_tpu, "renesas,tpu", h8300_tpu_init);
-- 
1.9.1


WARNING: multiple messages have this Message-ID (diff)
From: daniel.lezcano@linaro.org (Daniel Lezcano)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 37/69] clocksource/drivers/h8300: Cleanup startup and remove module code.
Date: Fri, 18 Dec 2015 15:17:50 +0100	[thread overview]
Message-ID: <1450448302-27429-37-git-send-email-daniel.lezcano@linaro.org> (raw)
In-Reply-To: <1450448302-27429-1-git-send-email-daniel.lezcano@linaro.org>

From: Yoshinori Sato <ysato@users.sourceforge.jp>

Remove some legacy code and replace it by the clksrc-of code.

Do some cleanup and code consolidation.

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/h8300_timer16.c | 141 +++++++++++++--------------------
 drivers/clocksource/h8300_timer8.c  | 150 ++++++++++++------------------------
 drivers/clocksource/h8300_tpu.c     | 117 ++++++++++------------------
 3 files changed, 144 insertions(+), 264 deletions(-)

diff --git a/drivers/clocksource/h8300_timer16.c b/drivers/clocksource/h8300_timer16.c
index 0e076c6..cdf0d83 100644
--- a/drivers/clocksource/h8300_timer16.c
+++ b/drivers/clocksource/h8300_timer16.c
@@ -17,6 +17,8 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 
 #include <asm/segment.h>
 #include <asm/irq.h>
@@ -47,9 +49,7 @@
 #define ABSOLUTE 1
 
 struct timer16_priv {
-	struct platform_device *pdev;
 	struct clocksource cs;
-	struct irqaction irqaction;
 	unsigned long total_cycles;
 	unsigned long mapbase;
 	unsigned long mapcommon;
@@ -144,110 +144,77 @@ static void timer16_disable(struct clocksource *cs)
 	p->cs_enabled = false;
 }
 
+static struct timer16_priv timer16_priv = {
+	.cs = {
+		.name = "h8300_16timer",
+		.rating = 200,
+		.read = timer16_clocksource_read,
+		.enable = timer16_enable,
+		.disable = timer16_disable,
+		.mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8),
+		.flags = CLOCK_SOURCE_IS_CONTINUOUS,
+	},
+};
+
 #define REG_CH   0
 #define REG_COMM 1
 
-static int timer16_setup(struct timer16_priv *p, struct platform_device *pdev)
+static void __init h8300_16timer_init(struct device_node *node)
 {
-	struct resource *res[2];
+	void __iomem *base[2];
 	int ret, irq;
 	unsigned int ch;
+	struct clk *clk;
 
-	p->pdev = pdev;
-
-	res[REG_CH] = platform_get_resource(p->pdev,
-					    IORESOURCE_MEM, REG_CH);
-	res[REG_COMM] = platform_get_resource(p->pdev,
-					      IORESOURCE_MEM, REG_COMM);
-	if (!res[REG_CH] || !res[REG_COMM]) {
-		dev_err(&p->pdev->dev, "failed to get I/O memory\n");
-		return -ENXIO;
-	}
-	irq = platform_get_irq(p->pdev, 0);
-	if (irq < 0) {
-		dev_err(&p->pdev->dev, "failed to get irq\n");
-		return irq;
+	clk = of_clk_get(node, 0);
+	if (IS_ERR(clk)) {
+		pr_err("failed to get clock for clocksource\n");
+		return;
 	}
 
-	p->clk = clk_get(&p->pdev->dev, "fck");
-	if (IS_ERR(p->clk)) {
-		dev_err(&p->pdev->dev, "can't get clk\n");
-		return PTR_ERR(p->clk);
+	base[REG_CH] = of_iomap(node, 0);
+	if (!base[REG_CH]) {
+		pr_err("failed to map registers for clocksource\n");
+		goto free_clk;
 	}
-	of_property_read_u32(p->pdev->dev.of_node, "renesas,channel", &ch);
-
-	p->pdev = pdev;
-	p->mapbase = res[REG_CH]->start;
-	p->mapcommon = res[REG_COMM]->start;
-	p->enb = 1 << ch;
-	p->imfa = 1 << ch;
-	p->imiea = 1 << (4 + ch);
-	p->cs.name = pdev->name;
-	p->cs.rating = 200;
-	p->cs.read = timer16_clocksource_read;
-	p->cs.enable = timer16_enable;
-	p->cs.disable = timer16_disable;
-	p->cs.mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8);
-	p->cs.flags = CLOCK_SOURCE_IS_CONTINUOUS;
 
-	ret = request_irq(irq, timer16_interrupt,
-			  IRQF_TIMER, pdev->name, p);
-	if (ret < 0) {
-		dev_err(&p->pdev->dev, "failed to request irq %d\n", irq);
-		return ret;
+	base[REG_COMM] = of_iomap(node, 1);
+	if (!base[REG_COMM]) {
+		pr_err("failed to map registers for clocksource\n");
+		goto unmap_ch;
 	}
 
-	clocksource_register_hz(&p->cs, clk_get_rate(p->clk) / 8);
-
-	return 0;
-}
-
-static int timer16_probe(struct platform_device *pdev)
-{
-	struct timer16_priv *p = platform_get_drvdata(pdev);
-
-	if (p) {
-		dev_info(&pdev->dev, "kept as earlytimer\n");
-		return 0;
+	irq = irq_of_parse_and_map(node, 0);
+	if (irq < 0) {
+		pr_err("failed to get irq for clockevent\n");
+		goto unmap_comm;
 	}
 
-	p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
-	if (!p)
-		return -ENOMEM;
+	of_property_read_u32(node, "renesas,channel", &ch);
 
-	return timer16_setup(p, pdev);
-}
+	timer16_priv.mapbase = (unsigned long)base[REG_CH];
+	timer16_priv.mapcommon = (unsigned long)base[REG_COMM];
+	timer16_priv.enb = 1 << ch;
+	timer16_priv.imfa = 1 << ch;
+	timer16_priv.imiea = 1 << (4 + ch);
 
-static int timer16_remove(struct platform_device *pdev)
-{
-	return -EBUSY;
-}
-
-static const struct of_device_id timer16_of_table[] = {
-	{ .compatible = "renesas,16bit-timer" },
-	{ }
-};
-static struct platform_driver timer16_driver = {
-	.probe		= timer16_probe,
-	.remove		= timer16_remove,
-	.driver		= {
-		.name	= "h8300h-16timer",
-		.of_match_table = of_match_ptr(timer16_of_table),
+	ret = request_irq(irq, timer16_interrupt,
+			  IRQF_TIMER, timer16_priv.cs.name, &timer16_priv);
+	if (ret < 0) {
+		pr_err("failed to request irq %d of clocksource\n", irq);
+		goto unmap_comm;
 	}
-};
 
-static int __init timer16_init(void)
-{
-	return platform_driver_register(&timer16_driver);
-}
+	clocksource_register_hz(&timer16_priv.cs,
+				clk_get_rate(timer16_priv.clk) / 8);
+	return;
 
-static void __exit timer16_exit(void)
-{
-	platform_driver_unregister(&timer16_driver);
+unmap_comm:
+	iounmap(base[REG_COMM]);
+unmap_ch:
+	iounmap(base[REG_CH]);
+free_clk:
+	clk_put(clk);
 }
 
-subsys_initcall(timer16_init);
-module_exit(timer16_exit);
-MODULE_AUTHOR("Yoshinori Sato");
-MODULE_DESCRIPTION("H8/300H 16bit Timer Driver");
-MODULE_LICENSE("GPL v2");
+CLOCKSOURCE_OF_DECLARE(h8300_16bit, "renesas,16bit-timer", h8300_16timer_init);
diff --git a/drivers/clocksource/h8300_timer8.c b/drivers/clocksource/h8300_timer8.c
index 44375d8..f0680eb 100644
--- a/drivers/clocksource/h8300_timer8.c
+++ b/drivers/clocksource/h8300_timer8.c
@@ -12,13 +12,14 @@
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
 #include <linux/init.h>
-#include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/clockchips.h>
 #include <linux/module.h>
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 
 #include <asm/irq.h>
 
@@ -39,10 +40,10 @@
 #define RELATIVE 0
 #define ABSOLUTE 1
 
+#define SCALE 64
+
 struct timer8_priv {
-	struct platform_device *pdev;
 	struct clock_event_device ced;
-	struct irqaction irqaction;
 	unsigned long mapbase;
 	raw_spinlock_t lock;
 	unsigned long flags;
@@ -111,7 +112,7 @@ static void timer8_set_next(struct timer8_priv *p, unsigned long delta)
 
 static int timer8_enable(struct timer8_priv *p)
 {
-	p->rate = clk_get_rate(p->pclk) / 64;
+	p->rate = clk_get_rate(p->pclk) / SCALE;
 	ctrl_outw(0xffff, p->mapbase + TCORA);
 	ctrl_outw(0x0000, p->mapbase + _8TCNT);
 	ctrl_outw(0x0c02, p->mapbase + _8TCR);
@@ -179,7 +180,7 @@ static int timer8_clock_event_periodic(struct clock_event_device *ced)
 {
 	struct timer8_priv *p = ced_to_priv(ced);
 
-	dev_info(&p->pdev->dev, "used for periodic clock events\n");
+	pr_info("%s: used for periodic clock events\n", ced->name);
 	timer8_stop(p);
 	timer8_clock_event_start(p, PERIODIC);
 
@@ -190,7 +191,7 @@ static int timer8_clock_event_oneshot(struct clock_event_device *ced)
 {
 	struct timer8_priv *p = ced_to_priv(ced);
 
-	dev_info(&p->pdev->dev, "used for oneshot clock events\n");
+	pr_info("%s: used for oneshot clock events\n", ced->name);
 	timer8_stop(p);
 	timer8_clock_event_start(p, ONESHOT);
 
@@ -208,110 +209,61 @@ static int timer8_clock_event_next(unsigned long delta,
 	return 0;
 }
 
-static int timer8_setup(struct timer8_priv *p,
-			struct platform_device *pdev)
+static struct timer8_priv timer8_priv = {
+	.ced = {
+		.name = "h8300_8timer",
+		.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+		.rating = 200,
+		.set_next_event = timer8_clock_event_next,
+		.set_state_shutdown = timer8_clock_event_shutdown,
+		.set_state_periodic = timer8_clock_event_periodic,
+		.set_state_oneshot = timer8_clock_event_oneshot,
+	},
+};
+
+static void __init h8300_8timer_init(struct device_node *node)
 {
-	struct resource *res;
+	void __iomem *base;
 	int irq;
-	int ret;
+	int ret = 0;
+	int rate;
+	struct clk *clk;
 
-	p->pdev = pdev;
+	clk = of_clk_get(node, 0);
+	if (IS_ERR(clk)) {
+		pr_err("failed to get clock for clockevent\n");
+		return;
+	}
 
-	res = platform_get_resource(p->pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(&p->pdev->dev, "failed to get I/O memory\n");
-		return -ENXIO;
+	base = of_iomap(node, 0);
+	if (!base) {
+		pr_err("failed to map registers for clockevent\n");
+		goto free_clk;
 	}
 
-	irq = platform_get_irq(p->pdev, 0);
+	irq = irq_of_parse_and_map(node, 0);
 	if (irq < 0) {
-		dev_err(&p->pdev->dev, "failed to get irq\n");
-		return -ENXIO;
+		pr_err("failed to get irq for clockevent\n");
+		goto unmap_reg;
 	}
 
-	p->mapbase = res->start;
-
-	p->irqaction.name = dev_name(&p->pdev->dev);
-	p->irqaction.handler = timer8_interrupt;
-	p->irqaction.dev_id = p;
-	p->irqaction.flags = IRQF_TIMER;
-
-	p->pclk = clk_get(&p->pdev->dev, "fck");
-	if (IS_ERR(p->pclk)) {
-		dev_err(&p->pdev->dev, "can't get clk\n");
-		return PTR_ERR(p->pclk);
-	}
+	timer8_priv.mapbase = (unsigned long)base;
+	timer8_priv.pclk = clk;
 
-	p->ced.name = pdev->name;
-	p->ced.features = CLOCK_EVT_FEAT_PERIODIC |
-		CLOCK_EVT_FEAT_ONESHOT;
-	p->ced.rating = 200;
-	p->ced.cpumask = cpumask_of(0);
-	p->ced.set_next_event = timer8_clock_event_next;
-	p->ced.set_state_shutdown = timer8_clock_event_shutdown;
-	p->ced.set_state_periodic = timer8_clock_event_periodic;
-	p->ced.set_state_oneshot = timer8_clock_event_oneshot;
-
-	ret = setup_irq(irq, &p->irqaction);
+	ret = request_irq(irq, timer8_interrupt,
+			  IRQF_TIMER, timer8_priv.ced.name, &timer8_priv);
 	if (ret < 0) {
-		dev_err(&p->pdev->dev,
-			"failed to request irq %d\n", irq);
-		return ret;
+		pr_err("failed to request irq %d for clockevent\n", irq);
+		goto unmap_reg;
 	}
-	clockevents_register_device(&p->ced);
-	platform_set_drvdata(pdev, p);
-
-	return 0;
-}
-
-static int timer8_probe(struct platform_device *pdev)
-{
-	struct timer8_priv *p = platform_get_drvdata(pdev);
-
-	if (p) {
-		dev_info(&pdev->dev, "kept as earlytimer\n");
-		return 0;
-	}
-
-	p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
-	if (!p)
-		return -ENOMEM;
-
-	return timer8_setup(p, pdev);
-}
-
-static int timer8_remove(struct platform_device *pdev)
-{
-	return -EBUSY;
-}
-
-static const struct of_device_id timer8_of_table[] __maybe_unused = {
-	{ .compatible = "renesas,8bit-timer" },
-	{ }
-};
-
-MODULE_DEVICE_TABLE(of, timer8_of_table);
-static struct platform_driver timer8_driver = {
-	.probe		= timer8_probe,
-	.remove		= timer8_remove,
-	.driver		= {
-		.name	= "h8300-8timer",
-		.of_match_table = of_match_ptr(timer8_of_table),
-	}
-};
-
-static int __init timer8_init(void)
-{
-	return platform_driver_register(&timer8_driver);
-}
-
-static void __exit timer8_exit(void)
-{
-	platform_driver_unregister(&timer8_driver);
+	rate = clk_get_rate(clk) / SCALE;
+	clockevents_config_and_register(&timer8_priv.ced, rate, 1, 0x0000ffff);
+	return;
+
+unmap_reg:
+	iounmap(base);
+free_clk:
+	clk_put(clk);
 }
 
-subsys_initcall(timer8_init);
-module_exit(timer8_exit);
-MODULE_AUTHOR("Yoshinori Sato");
-MODULE_DESCRIPTION("H8/300 8bit Timer Driver");
-MODULE_LICENSE("GPL v2");
+CLOCKSOURCE_OF_DECLARE(h8300_8bit, "renesas,8bit-timer", h8300_8timer_init);
diff --git a/drivers/clocksource/h8300_tpu.c b/drivers/clocksource/h8300_tpu.c
index 5487410..ed0b493 100644
--- a/drivers/clocksource/h8300_tpu.c
+++ b/drivers/clocksource/h8300_tpu.c
@@ -1,5 +1,5 @@
 /*
- *  H8/300 TPU Driver
+ *  H8S TPU Driver
  *
  *  Copyright 2015 Yoshinori Sato <ysato@users.sourcefoge.jp>
  *
@@ -17,8 +17,8 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/of.h>
-
-#include <asm/irq.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 
 #define TCR	0
 #define TMDR	1
@@ -32,9 +32,7 @@
 #define TGRD	14
 
 struct tpu_priv {
-	struct platform_device *pdev;
 	struct clocksource cs;
-	struct clk *clk;
 	unsigned long mapbase1;
 	unsigned long mapbase2;
 	raw_spinlock_t lock;
@@ -116,91 +114,54 @@ static void tpu_clocksource_disable(struct clocksource *cs)
 	p->cs_enabled = false;
 }
 
+static struct tpu_priv tpu_priv = {
+	.cs = {
+		.name = "H8S_TPU",
+		.rating = 200,
+		.read = tpu_clocksource_read,
+		.enable = tpu_clocksource_enable,
+		.disable = tpu_clocksource_disable,
+		.mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8),
+		.flags = CLOCK_SOURCE_IS_CONTINUOUS,
+	},
+};
+
 #define CH_L 0
 #define CH_H 1
 
-static int __init tpu_setup(struct tpu_priv *p, struct platform_device *pdev)
+static void __init h8300_tpu_init(struct device_node *node)
 {
-	struct resource *res[2];
-
-	p->pdev = pdev;
+	void __iomem *base[2];
+	struct clk *clk;
 
-	res[CH_L] = platform_get_resource(p->pdev, IORESOURCE_MEM, CH_L);
-	res[CH_H] = platform_get_resource(p->pdev, IORESOURCE_MEM, CH_H);
-	if (!res[CH_L] || !res[CH_H]) {
-		dev_err(&p->pdev->dev, "failed to get I/O memory\n");
-		return -ENXIO;
+	clk = of_clk_get(node, 0);
+	if (IS_ERR(clk)) {
+		pr_err("failed to get clock for clocksource\n");
+		return;
 	}
 
-	p->clk = clk_get(&p->pdev->dev, "fck");
-	if (IS_ERR(p->clk)) {
-		dev_err(&p->pdev->dev, "can't get clk\n");
-		return PTR_ERR(p->clk);
+	base[CH_L] = of_iomap(node, CH_L);
+	if (!base[CH_L]) {
+		pr_err("failed to map registers for clocksource\n");
+		goto free_clk;
 	}
-
-	p->mapbase1 = res[CH_L]->start;
-	p->mapbase2 = res[CH_H]->start;
-
-	p->cs.name = pdev->name;
-	p->cs.rating = 200;
-	p->cs.read = tpu_clocksource_read;
-	p->cs.enable = tpu_clocksource_enable;
-	p->cs.disable = tpu_clocksource_disable;
-	p->cs.mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8);
-	p->cs.flags = CLOCK_SOURCE_IS_CONTINUOUS;
-	clocksource_register_hz(&p->cs, clk_get_rate(p->clk) / 64);
-	platform_set_drvdata(pdev, p);
-
-	return 0;
-}
-
-static int tpu_probe(struct platform_device *pdev)
-{
-	struct tpu_priv *p = platform_get_drvdata(pdev);
-
-	if (p) {
-		dev_info(&pdev->dev, "kept as earlytimer\n");
-		return 0;
+	base[CH_H] = of_iomap(node, CH_H);
+	if (!base[CH_H]) {
+		pr_err("failed to map registers for clocksource\n");
+		goto unmap_L;
 	}
 
-	p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
-	if (!p)
-		return -ENOMEM;
+	tpu_priv.mapbase1 = (unsigned long)base[CH_L];
+	tpu_priv.mapbase2 = (unsigned long)base[CH_H];
 
-	return tpu_setup(p, pdev);
-}
+	clocksource_register_hz(&tpu_priv.cs, clk_get_rate(clk) / 64);
 
-static int tpu_remove(struct platform_device *pdev)
-{
-	return -EBUSY;
-}
+	return;
 
-static const struct of_device_id tpu_of_table[] = {
-	{ .compatible = "renesas,tpu" },
-	{ }
-};
-
-static struct platform_driver tpu_driver = {
-	.probe		= tpu_probe,
-	.remove		= tpu_remove,
-	.driver		= {
-		.name	= "h8s-tpu",
-		.of_match_table = of_match_ptr(tpu_of_table),
-	}
-};
-
-static int __init tpu_init(void)
-{
-	return platform_driver_register(&tpu_driver);
-}
-
-static void __exit tpu_exit(void)
-{
-	platform_driver_unregister(&tpu_driver);
+unmap_L:
+	iounmap(base[CH_H]);
+free_clk:
+	clk_put(clk);
 }
 
-subsys_initcall(tpu_init);
-module_exit(tpu_exit);
-MODULE_AUTHOR("Yoshinori Sato");
-MODULE_DESCRIPTION("H8S Timer Pulse Unit Driver");
-MODULE_LICENSE("GPL v2");
+CLOCKSOURCE_OF_DECLARE(h8300_tpu, "renesas,tpu", h8300_tpu_init);
-- 
1.9.1

  parent reply	other threads:[~2015-12-18 14:32 UTC|newest]

Thread overview: 154+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-12-17 14:50 [GIT PULL] clockevents for 4.5 Daniel Lezcano
2015-12-17 14:50 ` Daniel Lezcano
2015-12-18 14:17 ` [PATCH 01/69] clocksource/drivers/mtk_timer: Add pr_fmt define Daniel Lezcano
2015-12-18 14:17   ` Daniel Lezcano
2015-12-18 14:17   ` Daniel Lezcano
2015-12-18 14:17   ` [PATCH 02/69] clocksource/drivers/mtk_timer: Fix pr_warn() messages in mtk_timer_init Daniel Lezcano
2015-12-18 14:17     ` Daniel Lezcano
2015-12-18 14:17     ` Daniel Lezcano
2015-12-30 18:15     ` Matthias Brugger
2015-12-30 18:15       ` Matthias Brugger
2015-12-30 18:15       ` Matthias Brugger
2015-12-18 14:17   ` [PATCH 03/69] clocksource/drivers/mtk_timer: Fix memleak in mtk_timer_init() Daniel Lezcano
2015-12-18 14:17     ` Daniel Lezcano
2015-12-18 14:17     ` Daniel Lezcano
2015-12-18 14:17   ` [PATCH 04/69] clocksource/drivers/tegra: Allow timer irq affinity change Daniel Lezcano
2015-12-18 14:17     ` Daniel Lezcano
2015-12-18 14:17     ` Daniel Lezcano
2015-12-18 14:17   ` [PATCH 05/69] clocksource/drivers/rockchip: Make the driver more readable Daniel Lezcano
2015-12-18 14:17     ` Daniel Lezcano
2015-12-18 14:17     ` Daniel Lezcano
2015-12-18 14:17   ` [PATCH 06/69] time: Define dummy functions for the generic sched clock Daniel Lezcano
2015-12-18 14:17     ` Daniel Lezcano
2015-12-18 14:17   ` [PATCH 07/69] clocksource/drivers/rockchip: Remove dsb() usage Daniel Lezcano
2015-12-18 14:17     ` Daniel Lezcano
2015-12-18 14:17     ` Daniel Lezcano
2015-12-18 14:17   ` [PATCH 08/69] clocksource/drivers/qcom: Make COMPILE_TEST enabled for ARM architecture Daniel Lezcano
2015-12-18 14:17     ` Daniel Lezcano
2015-12-18 14:17   ` [PATCH 09/69] clocksource/drivers/st_lpc: Fix Kconfig dependency Daniel Lezcano
2015-12-18 14:17     ` Daniel Lezcano
2015-12-18 14:17   ` [PATCH 10/69] clocksource/drivers/st_lpc: Add the COMPILE_TEST option Daniel Lezcano
2015-12-18 14:17     ` Daniel Lezcano
2015-12-18 14:17   ` [PATCH 11/69] clocksource/drivers/pxa_timer: Move the Kconfig rule Daniel Lezcano
2015-12-18 14:17     ` Daniel Lezcano
2015-12-18 14:17   ` [PATCH 12/69] clocksource/drivers/pxa_timer: Add the COMPILE_TEST option Daniel Lezcano
2015-12-18 14:17     ` Daniel Lezcano
2015-12-18 14:17   ` [PATCH 13/69] clocksource/drivers/tango: Add " Daniel Lezcano
2015-12-18 14:17     ` Daniel Lezcano
2015-12-18 14:17   ` [PATCH 14/69] clocksource/drivers/pistachio: Add the " Daniel Lezcano
2015-12-18 14:17     ` Daniel Lezcano
2015-12-18 14:17   ` [PATCH 15/69] clocksource/drivers/mediatek: " Daniel Lezcano
2015-12-18 14:17     ` Daniel Lezcano
2015-12-18 14:17     ` Daniel Lezcano
2015-12-30 18:16     ` Matthias Brugger
2015-12-30 18:16       ` Matthias Brugger
2015-12-30 18:16       ` Matthias Brugger
2015-12-18 14:17   ` [PATCH 16/69] clocksource/drivers/rockchip: Add " Daniel Lezcano
2015-12-18 14:17     ` Daniel Lezcano
2015-12-18 14:17   ` [PATCH 17/69] clocksource/drivers/armada-370-xp: Add the " Daniel Lezcano
2015-12-18 14:17     ` Daniel Lezcano
2015-12-18 14:17   ` [PATCH 18/69] clocksource/drivers/meson6: " Daniel Lezcano
2015-12-18 14:17     ` Daniel Lezcano
2015-12-18 14:17   ` [PATCH 19/69] clocksource/drivers/orion: " Daniel Lezcano
2015-12-18 14:17     ` Daniel Lezcano
2015-12-18 14:17   ` [PATCH 20/69] clocksource/drivers/digicolor: " Daniel Lezcano
2015-12-18 14:17     ` Daniel Lezcano
2015-12-18 14:17   ` [PATCH 21/69] clocksource/drivers/dw_apb: " Daniel Lezcano
2015-12-18 14:17     ` Daniel Lezcano
2015-12-18 14:17   ` [PATCH 22/69] clocksource/drivers/sun4i: " Daniel Lezcano
2015-12-18 14:17     ` Daniel Lezcano
2015-12-18 14:17   ` [PATCH 23/69] clocksource/drivers/sun5i: " Daniel Lezcano
2015-12-18 14:17     ` Daniel Lezcano
2015-12-18 14:17   ` [PATCH 24/69] clocksource/drivers/tegra2: " Daniel Lezcano
2015-12-18 14:17     ` Daniel Lezcano
2015-12-18 14:17   ` [PATCH 25/69] clocksource/drivers/vt8500: Remove unneeded header Daniel Lezcano
2015-12-18 14:17     ` Daniel Lezcano
2015-12-18 14:17   ` [PATCH 26/69] clocksource/drivers/vt8500: Add the COMPILE_TEST option Daniel Lezcano
2015-12-18 14:17     ` Daniel Lezcano
2015-12-18 14:17   ` [PATCH 27/69] clocksource/drivers/cadence_ttc: " Daniel Lezcano
2015-12-18 14:17     ` Daniel Lezcano
2015-12-18 14:17   ` [PATCH 28/69] clocksource/drivers/asm9260: " Daniel Lezcano
2015-12-18 14:17     ` Daniel Lezcano
2015-12-18 14:17   ` [PATCH 29/69] clocksource/drivers/lpc32xx: " Daniel Lezcano
2015-12-18 14:17     ` Daniel Lezcano
2015-12-18 14:17   ` [PATCH 30/69] clocksource/drivers/nomadik_mtu: " Daniel Lezcano
2015-12-18 14:17     ` Daniel Lezcano
2015-12-18 14:17   ` [PATCH 31/69] clocksource/drivers/prcmu: Fix Kconfig and add " Daniel Lezcano
2015-12-18 14:17     ` Daniel Lezcano
2015-12-18 14:17   ` [PATCH 32/69] clocksource/drivers/exynos_mct: " Daniel Lezcano
2015-12-18 14:17     ` Daniel Lezcano
2015-12-18 14:17     ` Daniel Lezcano
2015-12-18 14:17   ` [PATCH 33/69] clocksource/drivers/samsung-pwm: Add the " Daniel Lezcano
2015-12-18 14:17     ` Daniel Lezcano
2015-12-18 14:17   ` [PATCH 34/69] clocksource/drivers/fsl-ftm: " Daniel Lezcano
2015-12-18 14:17     ` Daniel Lezcano
2015-12-18 14:17   ` [PATCH 35/69] clocksource/drivers/Kconfig: Add missing GENERIC_CLOCKEVENTS dependency Daniel Lezcano
2015-12-18 14:17     ` Daniel Lezcano
2015-12-18 14:17   ` [PATCH 36/69] clocksource/drivers/dw_apb_timer_of: Implement ARM delay timer Daniel Lezcano
2015-12-18 14:17     ` Daniel Lezcano
2015-12-18 14:17   ` Daniel Lezcano [this message]
2015-12-18 14:17     ` [PATCH 37/69] clocksource/drivers/h8300: Cleanup startup and remove module code Daniel Lezcano
2015-12-18 14:17   ` [PATCH 38/69] clocksource/drivers/h8300_timer8: Fix compilation error with dev_warn Daniel Lezcano
2015-12-18 14:17     ` Daniel Lezcano
2015-12-18 14:17   ` [PATCH 39/69] clocksource/drivers/h8300_tpu: Remove unused macros Daniel Lezcano
2015-12-18 14:17     ` Daniel Lezcano
2015-12-18 14:17   ` [PATCH 40/69] clocksource/drivers/h8300_tpu: Remove pointless headers for TPU Daniel Lezcano
2015-12-18 14:17     ` Daniel Lezcano
2015-12-18 14:17   ` [PATCH 41/69] clocksource/drivers/h8300_timer8: Remove unused headers Daniel Lezcano
2015-12-18 14:17     ` Daniel Lezcano
2015-12-18 14:17   ` [PATCH 42/69] clocksource/drivers/h8300_timer8: Remove unused macros Daniel Lezcano
2015-12-18 14:17     ` Daniel Lezcano
2015-12-18 14:17   ` [PATCH 43/69] clocksource/drivers/h8300_timer8: Remove PERIODIC and ONESHOT macro Daniel Lezcano
2015-12-18 14:17     ` Daniel Lezcano
2015-12-18 14:17   ` [PATCH 44/69] clocksource/drivers/h8300_timer8: Fix irq return value check Daniel Lezcano
2015-12-18 14:17     ` Daniel Lezcano
2015-12-18 14:17   ` [PATCH 45/69] clocksource/drivers/h8300_timer8: Remove pointless irq re-entrant safe code Daniel Lezcano
2015-12-18 14:17     ` Daniel Lezcano
2015-12-18 14:17   ` [PATCH 46/69] clocksource/drivers/h8300_timer8: Remove irq and lock legacy code Daniel Lezcano
2015-12-18 14:17     ` Daniel Lezcano
2015-12-18 14:18   ` [PATCH 47/69] clocksource/drivers/h8300_timer8: Retrieve the clock rate at init time Daniel Lezcano
2015-12-18 14:18     ` Daniel Lezcano
2015-12-18 14:18   ` [PATCH 48/69] clocksource/drivers/h8300_timer16: Remove pointless headers Daniel Lezcano
2015-12-18 14:18     ` Daniel Lezcano
2015-12-18 14:18   ` [PATCH 49/69] clocksource/drivers/h8300_timer16: Remove unused macros Daniel Lezcano
2015-12-18 14:18     ` Daniel Lezcano
2015-12-18 14:18   ` [PATCH 50/69] clocksource/drivers/h8300_timer16: Remove unused fields in timer16_priv Daniel Lezcano
2015-12-18 14:18     ` Daniel Lezcano
2015-12-18 14:18   ` [PATCH 51/69] clocksource/drivers/h8300_timer16: Fix irq return value check Daniel Lezcano
2015-12-18 14:18     ` Daniel Lezcano
2015-12-18 14:18   ` [PATCH 52/69] clocksource/drivers/h8300_timer16: Remove pointless lock Daniel Lezcano
2015-12-18 14:18     ` Daniel Lezcano
2015-12-18 14:18   ` [PATCH 53/69] clocksource/drivers/timer_sun5i: Replace code by clocksource_mmio_init Daniel Lezcano
2015-12-18 14:18     ` Daniel Lezcano
2015-12-18 14:18   ` [PATCH 54/69] clocksource/drivers/h8300_timer8: Separate the Kconfig option from the arch Daniel Lezcano
2015-12-18 14:18     ` Daniel Lezcano
2015-12-18 14:18   ` [PATCH 55/69] h8300: Rename ctlr_out/in[bwl] to raw_read/write[bwl] Daniel Lezcano
2015-12-18 14:18     ` Daniel Lezcano
2015-12-18 14:18   ` [PATCH 56/69] clocksource/drivers/h8300: Increase the compilation test coverage Daniel Lezcano
2015-12-18 14:18     ` Daniel Lezcano
2015-12-18 14:18   ` [PATCH 57/69] clocksource/drivers/tango-xtal: Replace code by clocksource_mmio_init Daniel Lezcano
2015-12-18 14:18     ` Daniel Lezcano
2015-12-18 14:18   ` [PATCH 58/69] clocksource/drivers/dw_apb_timer: Fix apbt_readl return types Daniel Lezcano
2015-12-18 14:18     ` Daniel Lezcano
2015-12-18 14:18   ` [PATCH 59/69] clocksource/drivers/dw_apb_timer: Use {readl|writel}_relaxed in critical path Daniel Lezcano
2015-12-18 14:18     ` Daniel Lezcano
2015-12-18 14:18   ` [PATCH 60/69] clocksource/drivers/dw_apb_timer: Inline apbt_readl and apbt_writel Daniel Lezcano
2015-12-18 14:18     ` Daniel Lezcano
2015-12-18 14:18   ` [PATCH 61/69] clockevents/drivers/arm_global_timer: Use writel_relaxed in gt_compare_set Daniel Lezcano
2015-12-18 14:18     ` Daniel Lezcano
2015-12-18 14:18   ` [PATCH 62/69] clocksource/drivers/pistachio: Fix wrong calculated clocksource read value Daniel Lezcano
2015-12-18 14:18     ` Daniel Lezcano
2015-12-18 14:18   ` [PATCH 63/69] clocksource/drivers/arm_global_timer: Fix suspend resume Daniel Lezcano
2015-12-18 14:18     ` Daniel Lezcano
2015-12-18 14:18   ` [PATCH 64/69] clocksource/drivers/lpc32: Correct pr_err() output format Daniel Lezcano
2015-12-18 14:18     ` Daniel Lezcano
2015-12-18 14:18   ` [PATCH 65/69] clocksource/drivers/h8300: Change to overflow interrupt Daniel Lezcano
2015-12-18 14:18     ` Daniel Lezcano
2015-12-18 14:18   ` [PATCH 66/69] clocksource/drivers/h8300: Fix timer not overflow case Daniel Lezcano
2015-12-18 14:18     ` Daniel Lezcano
2015-12-18 14:18   ` [PATCH 67/69] clocksource/drivers/h8300: Simplify delta handling Daniel Lezcano
2015-12-18 14:18     ` Daniel Lezcano
2015-12-18 14:18   ` [PATCH 68/69] clocksource/drivers/h8300: Initializer cleanup Daniel Lezcano
2015-12-18 14:18     ` Daniel Lezcano
2015-12-18 14:18   ` [PATCH 69/69] clocksource/drivers/h8300: Use ioread / iowrite Daniel Lezcano
2015-12-18 14:18     ` Daniel Lezcano

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1450448302-27429-37-git-send-email-daniel.lezcano@linaro.org \
    --to=daniel.lezcano@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@kernel.org \
    --cc=tglx@linutronix.de \
    --cc=uclinux-h8-devel@lists.sourceforge.jp \
    --cc=ysato@users.sourceforge.jp \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.