All of lore.kernel.org
 help / color / mirror / Atom feed
From: Javier Martinez Canillas <javier@osg.samsung.com>
To: linux-kernel@vger.kernel.org
Cc: Kukjin Kim <kgene@kernel.org>,
	rtc-linux@googlegroups.com, Chanwoo Choi <cw00.choi@samsung.com>,
	Alexandre Belloni <alexandre.belloni@free-electrons.com>,
	Krzysztof Kozlowski <k.kozlowski@samsung.com>,
	Laxman Dewangan <ldewangan@nvidia.com>,
	linux-samsung-soc@vger.kernel.org,
	Javier Martinez Canillas <javier@osg.samsung.com>
Subject: [PATCH v2 04/10] rtc: max77686: Use a driver data struct instead hard-coded values
Date: Thu, 21 Jan 2016 17:23:27 -0300	[thread overview]
Message-ID: <1453407813-14646-5-git-send-email-javier@osg.samsung.com> (raw)
In-Reply-To: <1453407813-14646-1-git-send-email-javier@osg.samsung.com>

The driver has some hard-coded values such as the minimum delay needed
before a RTC update or the mask used for the sec/min/hour/etc registers.

Use a data structure that contains these values and pass as driver data
using the platform device ID table for each device.

This allows to make the driver's ops callbacks more generic so other RTC
that are similar but don't have the same values can also be supported.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>

---

Changes in v2:
- Add a max77686 prefix to rtc_driver_data. Suggested by Krzysztof Kozlowski.
- Comment about the .delay and .mask fields. Suggested by Krzysztof Kozlowski.
- Change .mask type to u8. Suggested by Krzysztof Kozlowski.
- Make .drv_data field const. Suggested by Krzysztof Kozlowski.
- Don't cast to drop const on .drv_data asign. Suggested by Krzysztof Kozlowski.
- Use platform_get_device_id() macro. Suggested by Krzysztof Kozlowski.

 drivers/rtc/rtc-max77686.c | 51 ++++++++++++++++++++++++++++++----------------
 1 file changed, 34 insertions(+), 17 deletions(-)

diff --git a/drivers/rtc/rtc-max77686.c b/drivers/rtc/rtc-max77686.c
index 71ef2240b3fc..16033a2c2756 100644
--- a/drivers/rtc/rtc-max77686.c
+++ b/drivers/rtc/rtc-max77686.c
@@ -41,8 +41,6 @@
 #define ALARM_ENABLE_SHIFT		7
 #define ALARM_ENABLE_MASK		(1 << ALARM_ENABLE_SHIFT)
 
-#define MAX77686_RTC_UPDATE_DELAY	16000
-
 enum {
 	RTC_SEC = 0,
 	RTC_MIN,
@@ -54,6 +52,13 @@ enum {
 	RTC_NR_TIME
 };
 
+struct max77686_rtc_driver_data {
+	/* Minimum delay needed for a RTC update */
+	unsigned long		delay;
+	/* Mask used to read RTC registers value */
+	u8			mask;
+};
+
 struct max77686_rtc_info {
 	struct device		*dev;
 	struct max77686_dev	*max77686;
@@ -63,6 +68,8 @@ struct max77686_rtc_info {
 
 	struct regmap		*regmap;
 
+	const struct max77686_rtc_driver_data *drv_data;
+
 	int virq;
 	int rtc_24hr_mode;
 };
@@ -72,12 +79,19 @@ enum MAX77686_RTC_OP {
 	MAX77686_RTC_READ,
 };
 
+static const struct max77686_rtc_driver_data max77686_drv_data = {
+	.delay = 1600,
+	.mask  = 0x7f,
+};
+
 static void max77686_rtc_data_to_tm(u8 *data, struct rtc_time *tm,
-				   int rtc_24hr_mode)
+				    struct max77686_rtc_info *info)
 {
-	tm->tm_sec = data[RTC_SEC] & 0x7f;
-	tm->tm_min = data[RTC_MIN] & 0x7f;
-	if (rtc_24hr_mode)
+	int mask = info->drv_data->mask;
+
+	tm->tm_sec = data[RTC_SEC] & mask;
+	tm->tm_min = data[RTC_MIN] & mask;
+	if (info->rtc_24hr_mode)
 		tm->tm_hour = data[RTC_HOUR] & 0x1f;
 	else {
 		tm->tm_hour = data[RTC_HOUR] & 0x0f;
@@ -86,10 +100,10 @@ static void max77686_rtc_data_to_tm(u8 *data, struct rtc_time *tm,
 	}
 
 	/* Only a single bit is set in data[], so fls() would be equivalent */
-	tm->tm_wday = ffs(data[RTC_WEEKDAY] & 0x7f) - 1;
+	tm->tm_wday = ffs(data[RTC_WEEKDAY] & mask) - 1;
 	tm->tm_mday = data[RTC_DATE] & 0x1f;
 	tm->tm_mon = (data[RTC_MONTH] & 0x0f) - 1;
-	tm->tm_year = (data[RTC_YEAR] & 0x7f) + 100;
+	tm->tm_year = (data[RTC_YEAR] & mask) + 100;
 	tm->tm_yday = 0;
 	tm->tm_isdst = 0;
 }
@@ -117,6 +131,7 @@ static int max77686_rtc_update(struct max77686_rtc_info *info,
 {
 	int ret;
 	unsigned int data;
+	unsigned long delay = info->drv_data->delay;
 
 	if (op == MAX77686_RTC_WRITE)
 		data = 1 << RTC_UDR_SHIFT;
@@ -129,9 +144,8 @@ static int max77686_rtc_update(struct max77686_rtc_info *info,
 		dev_err(info->dev, "%s: fail to write update reg(ret=%d, data=0x%x)\n",
 				__func__, ret, data);
 	else {
-		/* Minimum 16ms delay required before RTC update. */
-		usleep_range(MAX77686_RTC_UPDATE_DELAY,
-			     MAX77686_RTC_UPDATE_DELAY * 2);
+		/* Minimum delay required before RTC update. */
+		usleep_range(delay, delay * 2);
 	}
 
 	return ret;
@@ -156,7 +170,7 @@ static int max77686_rtc_read_time(struct device *dev, struct rtc_time *tm)
 		goto out;
 	}
 
-	max77686_rtc_data_to_tm(data, tm, info->rtc_24hr_mode);
+	max77686_rtc_data_to_tm(data, tm, info);
 
 	ret = rtc_valid_tm(tm);
 
@@ -213,7 +227,7 @@ static int max77686_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 		goto out;
 	}
 
-	max77686_rtc_data_to_tm(data, &alrm->time, info->rtc_24hr_mode);
+	max77686_rtc_data_to_tm(data, &alrm->time, info);
 
 	alrm->enabled = 0;
 	for (i = 0; i < RTC_NR_TIME; i++) {
@@ -260,7 +274,7 @@ static int max77686_rtc_stop_alarm(struct max77686_rtc_info *info)
 		goto out;
 	}
 
-	max77686_rtc_data_to_tm(data, &tm, info->rtc_24hr_mode);
+	max77686_rtc_data_to_tm(data, &tm, info);
 
 	for (i = 0; i < RTC_NR_TIME; i++)
 		data[i] &= ~ALARM_ENABLE_MASK;
@@ -299,7 +313,7 @@ static int max77686_rtc_start_alarm(struct max77686_rtc_info *info)
 		goto out;
 	}
 
-	max77686_rtc_data_to_tm(data, &tm, info->rtc_24hr_mode);
+	max77686_rtc_data_to_tm(data, &tm, info);
 
 	data[RTC_SEC] |= (1 << ALARM_ENABLE_SHIFT);
 	data[RTC_MIN] |= (1 << ALARM_ENABLE_SHIFT);
@@ -307,7 +321,7 @@ static int max77686_rtc_start_alarm(struct max77686_rtc_info *info)
 	data[RTC_WEEKDAY] &= ~ALARM_ENABLE_MASK;
 	if (data[RTC_MONTH] & 0xf)
 		data[RTC_MONTH] |= (1 << ALARM_ENABLE_SHIFT);
-	if (data[RTC_YEAR] & 0x7f)
+	if (data[RTC_YEAR] & info->drv_data->mask)
 		data[RTC_YEAR] |= (1 << ALARM_ENABLE_SHIFT);
 	if (data[RTC_DATE] & 0x1f)
 		data[RTC_DATE] |= (1 << ALARM_ENABLE_SHIFT);
@@ -423,6 +437,7 @@ static int max77686_rtc_probe(struct platform_device *pdev)
 {
 	struct max77686_dev *max77686 = dev_get_drvdata(pdev->dev.parent);
 	struct max77686_rtc_info *info;
+	const struct platform_device_id *id = platform_get_device_id(pdev);
 	int ret;
 
 	dev_info(&pdev->dev, "%s\n", __func__);
@@ -436,6 +451,8 @@ static int max77686_rtc_probe(struct platform_device *pdev)
 	info->dev = &pdev->dev;
 	info->max77686 = max77686;
 	info->rtc = max77686->rtc;
+	info->drv_data = (const struct max77686_rtc_driver_data *)
+		id->driver_data;
 
 	platform_set_drvdata(pdev, info);
 
@@ -510,7 +527,7 @@ static SIMPLE_DEV_PM_OPS(max77686_rtc_pm_ops,
 			 max77686_rtc_suspend, max77686_rtc_resume);
 
 static const struct platform_device_id rtc_id[] = {
-	{ "max77686-rtc", 0 },
+	{ "max77686-rtc", .driver_data = (kernel_ulong_t)&max77686_drv_data, },
 	{},
 };
 MODULE_DEVICE_TABLE(platform, rtc_id);
-- 
2.5.0

WARNING: multiple messages have this Message-ID (diff)
From: Javier Martinez Canillas <javier@osg.samsung.com>
To: linux-kernel@vger.kernel.org
Cc: Kukjin Kim <kgene@kernel.org>,
	rtc-linux@googlegroups.com, Chanwoo Choi <cw00.choi@samsung.com>,
	Alexandre Belloni <alexandre.belloni@free-electrons.com>,
	Krzysztof Kozlowski <k.kozlowski@samsung.com>,
	Laxman Dewangan <ldewangan@nvidia.com>,
	linux-samsung-soc@vger.kernel.org,
	Javier Martinez Canillas <javier@osg.samsung.com>
Subject: [rtc-linux] [PATCH v2 04/10] rtc: max77686: Use a driver data struct instead hard-coded values
Date: Thu, 21 Jan 2016 17:23:27 -0300	[thread overview]
Message-ID: <1453407813-14646-5-git-send-email-javier@osg.samsung.com> (raw)
In-Reply-To: <1453407813-14646-1-git-send-email-javier@osg.samsung.com>

The driver has some hard-coded values such as the minimum delay needed
before a RTC update or the mask used for the sec/min/hour/etc registers.

Use a data structure that contains these values and pass as driver data
using the platform device ID table for each device.

This allows to make the driver's ops callbacks more generic so other RTC
that are similar but don't have the same values can also be supported.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>

---

Changes in v2:
- Add a max77686 prefix to rtc_driver_data. Suggested by Krzysztof Kozlowski.
- Comment about the .delay and .mask fields. Suggested by Krzysztof Kozlowski.
- Change .mask type to u8. Suggested by Krzysztof Kozlowski.
- Make .drv_data field const. Suggested by Krzysztof Kozlowski.
- Don't cast to drop const on .drv_data asign. Suggested by Krzysztof Kozlowski.
- Use platform_get_device_id() macro. Suggested by Krzysztof Kozlowski.

 drivers/rtc/rtc-max77686.c | 51 ++++++++++++++++++++++++++++++----------------
 1 file changed, 34 insertions(+), 17 deletions(-)

diff --git a/drivers/rtc/rtc-max77686.c b/drivers/rtc/rtc-max77686.c
index 71ef2240b3fc..16033a2c2756 100644
--- a/drivers/rtc/rtc-max77686.c
+++ b/drivers/rtc/rtc-max77686.c
@@ -41,8 +41,6 @@
 #define ALARM_ENABLE_SHIFT		7
 #define ALARM_ENABLE_MASK		(1 << ALARM_ENABLE_SHIFT)
 
-#define MAX77686_RTC_UPDATE_DELAY	16000
-
 enum {
 	RTC_SEC = 0,
 	RTC_MIN,
@@ -54,6 +52,13 @@ enum {
 	RTC_NR_TIME
 };
 
+struct max77686_rtc_driver_data {
+	/* Minimum delay needed for a RTC update */
+	unsigned long		delay;
+	/* Mask used to read RTC registers value */
+	u8			mask;
+};
+
 struct max77686_rtc_info {
 	struct device		*dev;
 	struct max77686_dev	*max77686;
@@ -63,6 +68,8 @@ struct max77686_rtc_info {
 
 	struct regmap		*regmap;
 
+	const struct max77686_rtc_driver_data *drv_data;
+
 	int virq;
 	int rtc_24hr_mode;
 };
@@ -72,12 +79,19 @@ enum MAX77686_RTC_OP {
 	MAX77686_RTC_READ,
 };
 
+static const struct max77686_rtc_driver_data max77686_drv_data = {
+	.delay = 1600,
+	.mask  = 0x7f,
+};
+
 static void max77686_rtc_data_to_tm(u8 *data, struct rtc_time *tm,
-				   int rtc_24hr_mode)
+				    struct max77686_rtc_info *info)
 {
-	tm->tm_sec = data[RTC_SEC] & 0x7f;
-	tm->tm_min = data[RTC_MIN] & 0x7f;
-	if (rtc_24hr_mode)
+	int mask = info->drv_data->mask;
+
+	tm->tm_sec = data[RTC_SEC] & mask;
+	tm->tm_min = data[RTC_MIN] & mask;
+	if (info->rtc_24hr_mode)
 		tm->tm_hour = data[RTC_HOUR] & 0x1f;
 	else {
 		tm->tm_hour = data[RTC_HOUR] & 0x0f;
@@ -86,10 +100,10 @@ static void max77686_rtc_data_to_tm(u8 *data, struct rtc_time *tm,
 	}
 
 	/* Only a single bit is set in data[], so fls() would be equivalent */
-	tm->tm_wday = ffs(data[RTC_WEEKDAY] & 0x7f) - 1;
+	tm->tm_wday = ffs(data[RTC_WEEKDAY] & mask) - 1;
 	tm->tm_mday = data[RTC_DATE] & 0x1f;
 	tm->tm_mon = (data[RTC_MONTH] & 0x0f) - 1;
-	tm->tm_year = (data[RTC_YEAR] & 0x7f) + 100;
+	tm->tm_year = (data[RTC_YEAR] & mask) + 100;
 	tm->tm_yday = 0;
 	tm->tm_isdst = 0;
 }
@@ -117,6 +131,7 @@ static int max77686_rtc_update(struct max77686_rtc_info *info,
 {
 	int ret;
 	unsigned int data;
+	unsigned long delay = info->drv_data->delay;
 
 	if (op == MAX77686_RTC_WRITE)
 		data = 1 << RTC_UDR_SHIFT;
@@ -129,9 +144,8 @@ static int max77686_rtc_update(struct max77686_rtc_info *info,
 		dev_err(info->dev, "%s: fail to write update reg(ret=%d, data=0x%x)\n",
 				__func__, ret, data);
 	else {
-		/* Minimum 16ms delay required before RTC update. */
-		usleep_range(MAX77686_RTC_UPDATE_DELAY,
-			     MAX77686_RTC_UPDATE_DELAY * 2);
+		/* Minimum delay required before RTC update. */
+		usleep_range(delay, delay * 2);
 	}
 
 	return ret;
@@ -156,7 +170,7 @@ static int max77686_rtc_read_time(struct device *dev, struct rtc_time *tm)
 		goto out;
 	}
 
-	max77686_rtc_data_to_tm(data, tm, info->rtc_24hr_mode);
+	max77686_rtc_data_to_tm(data, tm, info);
 
 	ret = rtc_valid_tm(tm);
 
@@ -213,7 +227,7 @@ static int max77686_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 		goto out;
 	}
 
-	max77686_rtc_data_to_tm(data, &alrm->time, info->rtc_24hr_mode);
+	max77686_rtc_data_to_tm(data, &alrm->time, info);
 
 	alrm->enabled = 0;
 	for (i = 0; i < RTC_NR_TIME; i++) {
@@ -260,7 +274,7 @@ static int max77686_rtc_stop_alarm(struct max77686_rtc_info *info)
 		goto out;
 	}
 
-	max77686_rtc_data_to_tm(data, &tm, info->rtc_24hr_mode);
+	max77686_rtc_data_to_tm(data, &tm, info);
 
 	for (i = 0; i < RTC_NR_TIME; i++)
 		data[i] &= ~ALARM_ENABLE_MASK;
@@ -299,7 +313,7 @@ static int max77686_rtc_start_alarm(struct max77686_rtc_info *info)
 		goto out;
 	}
 
-	max77686_rtc_data_to_tm(data, &tm, info->rtc_24hr_mode);
+	max77686_rtc_data_to_tm(data, &tm, info);
 
 	data[RTC_SEC] |= (1 << ALARM_ENABLE_SHIFT);
 	data[RTC_MIN] |= (1 << ALARM_ENABLE_SHIFT);
@@ -307,7 +321,7 @@ static int max77686_rtc_start_alarm(struct max77686_rtc_info *info)
 	data[RTC_WEEKDAY] &= ~ALARM_ENABLE_MASK;
 	if (data[RTC_MONTH] & 0xf)
 		data[RTC_MONTH] |= (1 << ALARM_ENABLE_SHIFT);
-	if (data[RTC_YEAR] & 0x7f)
+	if (data[RTC_YEAR] & info->drv_data->mask)
 		data[RTC_YEAR] |= (1 << ALARM_ENABLE_SHIFT);
 	if (data[RTC_DATE] & 0x1f)
 		data[RTC_DATE] |= (1 << ALARM_ENABLE_SHIFT);
@@ -423,6 +437,7 @@ static int max77686_rtc_probe(struct platform_device *pdev)
 {
 	struct max77686_dev *max77686 = dev_get_drvdata(pdev->dev.parent);
 	struct max77686_rtc_info *info;
+	const struct platform_device_id *id = platform_get_device_id(pdev);
 	int ret;
 
 	dev_info(&pdev->dev, "%s\n", __func__);
@@ -436,6 +451,8 @@ static int max77686_rtc_probe(struct platform_device *pdev)
 	info->dev = &pdev->dev;
 	info->max77686 = max77686;
 	info->rtc = max77686->rtc;
+	info->drv_data = (const struct max77686_rtc_driver_data *)
+		id->driver_data;
 
 	platform_set_drvdata(pdev, info);
 
@@ -510,7 +527,7 @@ static SIMPLE_DEV_PM_OPS(max77686_rtc_pm_ops,
 			 max77686_rtc_suspend, max77686_rtc_resume);
 
 static const struct platform_device_id rtc_id[] = {
-	{ "max77686-rtc", 0 },
+	{ "max77686-rtc", .driver_data = (kernel_ulong_t)&max77686_drv_data, },
 	{},
 };
 MODULE_DEVICE_TABLE(platform, rtc_id);
-- 
2.5.0

-- 
-- 
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
--- 
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

  parent reply	other threads:[~2016-01-21 20:24 UTC|newest]

Thread overview: 78+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-01-21 20:23 [PATCH v2 00/10] rtc: max77686: Extend driver and add max77802 support Javier Martinez Canillas
2016-01-21 20:23 ` Javier Martinez Canillas
2016-01-21 20:23 ` [rtc-linux] " Javier Martinez Canillas
2016-01-21 20:23 ` [PATCH v2 01/10] rtc: max77686: Fix max77686_rtc_read_alarm() return value Javier Martinez Canillas
2016-01-21 20:23   ` [rtc-linux] " Javier Martinez Canillas
2016-01-22  0:51   ` Krzysztof Kozlowski
2016-01-22  0:51     ` [rtc-linux] " Krzysztof Kozlowski
2016-01-22  9:35   ` Laxman Dewangan
2016-01-22  9:35     ` Laxman Dewangan
2016-01-22  9:35     ` [rtc-linux] " Laxman Dewangan
2016-01-21 20:23 ` [PATCH v2 02/10] rtc: max77686: Use ARRAY_SIZE() instead of current array length Javier Martinez Canillas
2016-01-21 20:23   ` [rtc-linux] " Javier Martinez Canillas
2016-01-22  0:53   ` Krzysztof Kozlowski
2016-01-22  0:53     ` [rtc-linux] " Krzysztof Kozlowski
2016-01-22  9:39   ` Laxman Dewangan
2016-01-22  9:39     ` Laxman Dewangan
2016-01-22  9:39     ` [rtc-linux] " Laxman Dewangan
2016-01-22 11:43     ` Javier Martinez Canillas
2016-01-22 11:43       ` [rtc-linux] " Javier Martinez Canillas
2016-01-21 20:23 ` [PATCH v2 03/10] rtc: max77686: Use usleep_range() instead of msleep() Javier Martinez Canillas
2016-01-21 20:23   ` [rtc-linux] " Javier Martinez Canillas
2016-01-22  1:02   ` Krzysztof Kozlowski
2016-01-22  1:02     ` [rtc-linux] " Krzysztof Kozlowski
2016-01-22  9:41   ` Laxman Dewangan
2016-01-22  9:41     ` Laxman Dewangan
2016-01-22  9:41     ` [rtc-linux] " Laxman Dewangan
2016-01-22 12:05     ` Javier Martinez Canillas
2016-01-22 12:05       ` [rtc-linux] " Javier Martinez Canillas
2016-01-25 11:17       ` Laxman Dewangan
2016-01-25 11:17         ` Laxman Dewangan
2016-01-25 11:17         ` [rtc-linux] " Laxman Dewangan
2016-01-21 20:23 ` Javier Martinez Canillas [this message]
2016-01-21 20:23   ` [rtc-linux] [PATCH v2 04/10] rtc: max77686: Use a driver data struct instead hard-coded values Javier Martinez Canillas
2016-01-22  1:00   ` Krzysztof Kozlowski
2016-01-22  1:00     ` [rtc-linux] " Krzysztof Kozlowski
2016-01-22  1:48     ` Javier Martinez Canillas
2016-01-22  1:48       ` [rtc-linux] " Javier Martinez Canillas
2016-01-22  9:50   ` Laxman Dewangan
2016-01-22  9:50     ` Laxman Dewangan
2016-01-22  9:50     ` [rtc-linux] " Laxman Dewangan
2016-01-21 20:23 ` [PATCH v2 05/10] rtc: max77686: Add an indirection level to access RTC registers Javier Martinez Canillas
2016-01-21 20:23   ` [rtc-linux] " Javier Martinez Canillas
2016-01-22  9:52   ` Laxman Dewangan
2016-01-22  9:52     ` Laxman Dewangan
2016-01-22  9:52     ` [rtc-linux] " Laxman Dewangan
2016-01-21 20:23 ` [PATCH v2 06/10] rtc: max77686: Add max77802 support Javier Martinez Canillas
2016-01-21 20:23   ` [rtc-linux] " Javier Martinez Canillas
2016-01-22  9:54   ` Laxman Dewangan
2016-01-22  9:54     ` Laxman Dewangan
2016-01-22  9:54     ` [rtc-linux] " Laxman Dewangan
2016-01-21 20:23 ` [PATCH v2 07/10] rtc: max77686: Use dev_warn() instead of pr_warn() Javier Martinez Canillas
2016-01-21 20:23   ` [rtc-linux] " Javier Martinez Canillas
2016-01-22  9:56   ` Laxman Dewangan
2016-01-22  9:56     ` Laxman Dewangan
2016-01-22  9:56     ` [rtc-linux] " Laxman Dewangan
2016-01-21 20:23 ` [PATCH v2 08/10] rtc: Remove Maxim 77802 driver Javier Martinez Canillas
2016-01-21 20:23   ` [rtc-linux] " Javier Martinez Canillas
2016-01-22  9:59   ` Laxman Dewangan
2016-01-22  9:59     ` Laxman Dewangan
2016-01-22  9:59     ` [rtc-linux] " Laxman Dewangan
2016-01-21 20:23 ` [PATCH v2 09/10] ARM: exynos_defconfig: Remove MAX77802 RTC Kconfig symbol Javier Martinez Canillas
2016-01-21 20:23   ` [rtc-linux] " Javier Martinez Canillas
2016-01-21 20:23 ` [PATCH v2 10/10] ARM: multi_v7_defconfig: " Javier Martinez Canillas
2016-01-21 20:23   ` Javier Martinez Canillas
2016-01-21 20:23   ` [rtc-linux] " Javier Martinez Canillas
2016-01-22  9:57   ` Laxman Dewangan
2016-01-22  9:57     ` Laxman Dewangan
2016-01-22  9:57     ` Laxman Dewangan
2016-01-22  9:57     ` [rtc-linux] " Laxman Dewangan
2016-01-22 12:09     ` Javier Martinez Canillas
2016-01-22 12:09       ` Javier Martinez Canillas
2016-01-22 12:09       ` [rtc-linux] " Javier Martinez Canillas
2016-01-25 16:06 ` [PATCH v2 00/10] rtc: max77686: Extend driver and add max77802 support Alexandre Belloni
2016-01-25 16:06   ` Alexandre Belloni
2016-01-25 16:06   ` [rtc-linux] " Alexandre Belloni
2016-01-25 23:45   ` Javier Martinez Canillas
2016-01-25 23:45     ` Javier Martinez Canillas
2016-01-25 23:45     ` [rtc-linux] " Javier Martinez Canillas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1453407813-14646-5-git-send-email-javier@osg.samsung.com \
    --to=javier@osg.samsung.com \
    --cc=alexandre.belloni@free-electrons.com \
    --cc=cw00.choi@samsung.com \
    --cc=k.kozlowski@samsung.com \
    --cc=kgene@kernel.org \
    --cc=ldewangan@nvidia.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=rtc-linux@googlegroups.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.