From: Raja Mani <rmani@qti.qualcomm.com>
To: <ath10k@lists.infradead.org>
Cc: <linux-wireless@vger.kernel.org>, Raja Mani <rmani@qti.qualcomm.com>
Subject: [PATCH 06/12] ath10k: add helper functions in ahb.c for reg rd/wr
Date: Wed, 27 Jan 2016 15:24:27 +0530 [thread overview]
Message-ID: <1453888473-2879-7-git-send-email-rmani@qti.qualcomm.com> (raw)
In-Reply-To: <1453888473-2879-1-git-send-email-rmani@qti.qualcomm.com>
qca4019 deals with below register memory region to control the clock,
reset, etc.
- Memory to control wifi core
- gcc (outside of wifi)
- tcsr (outside of wifi)
Add new helper functions to perform read/write in above registers
spaces. Actual ioremap for above registers are done in later patch.
Struct ath10k_ahb is introduced to maintain ahb specific info and
memory this struct will be allocated in the continuation of struct
ath10k_pci (again, memory ath10k_ahb is allocated in the later patch).
Signed-off-by: Raja Mani <rmani@qti.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/ahb.c | 55 +++++++++++++++++++++++++++++++++++
drivers/net/wireless/ath/ath10k/ahb.h | 7 +++++
drivers/net/wireless/ath/ath10k/pci.h | 6 ++++
3 files changed, 68 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/ahb.c b/drivers/net/wireless/ath/ath10k/ahb.c
index 129f4f4..eab4b47 100644
--- a/drivers/net/wireless/ath/ath10k/ahb.c
+++ b/drivers/net/wireless/ath/ath10k/ahb.c
@@ -17,6 +17,7 @@
#include <linux/module.h>
#include "core.h"
#include "debug.h"
+#include "pci.h"
#include "ahb.h"
static const struct of_device_id ath10k_ahb_of_match[] = {
@@ -29,6 +30,60 @@ static const struct of_device_id ath10k_ahb_of_match[] = {
MODULE_DEVICE_TABLE(of, ath10k_ahb_of_match);
+static inline struct ath10k_ahb *ath10k_ahb_priv(struct ath10k *ar)
+{
+ return &((struct ath10k_pci *)ar->drv_priv)->ahb[0];
+}
+
+static void ath10k_ahb_write32(struct ath10k *ar, u32 offset, u32 value)
+{
+ struct ath10k_ahb *ar_ahb = ath10k_ahb_priv(ar);
+
+ iowrite32(value, ar_ahb->mem + offset);
+}
+
+static u32 ath10k_ahb_read32(struct ath10k *ar, u32 offset)
+{
+ struct ath10k_ahb *ar_ahb = ath10k_ahb_priv(ar);
+
+ return ioread32(ar_ahb->mem + offset);
+}
+
+static u32 ath10k_ahb_gcc_read32(struct ath10k *ar, u32 offset)
+{
+ struct ath10k_ahb *ar_ahb = ath10k_ahb_priv(ar);
+
+ return ioread32(ar_ahb->gcc_mem + offset);
+}
+
+static void ath10k_ahb_tcsr_write32(struct ath10k *ar, u32 offset, u32 value)
+{
+ struct ath10k_ahb *ar_ahb = ath10k_ahb_priv(ar);
+
+ iowrite32(value, ar_ahb->tcsr_mem + offset);
+}
+
+static u32 ath10k_ahb_tcsr_read32(struct ath10k *ar, u32 offset)
+{
+ struct ath10k_ahb *ar_ahb = ath10k_ahb_priv(ar);
+
+ return ioread32(ar_ahb->tcsr_mem + offset);
+}
+
+static u32 ath10k_ahb_soc_read32(struct ath10k *ar, u32 addr)
+{
+ return ath10k_ahb_read32(ar, RTC_SOC_BASE_ADDRESS + addr);
+}
+
+static int ath10k_ahb_get_num_banks(struct ath10k *ar)
+{
+ if (ar->hw_rev == ATH10K_HW_QCA4019)
+ return 1;
+
+ ath10k_warn(ar, "unknown number of banks, assuming 1\n");
+ return 1;
+}
+
static int ath10k_ahb_probe(struct platform_device *pdev)
{
return 0;
diff --git a/drivers/net/wireless/ath/ath10k/ahb.h b/drivers/net/wireless/ath/ath10k/ahb.h
index d1afe93..77d15af 100644
--- a/drivers/net/wireless/ath/ath10k/ahb.h
+++ b/drivers/net/wireless/ath/ath10k/ahb.h
@@ -20,6 +20,13 @@
#include <linux/platform_device.h>
+struct ath10k_ahb {
+ struct platform_device *pdev;
+ void __iomem *mem;
+ void __iomem *gcc_mem;
+ void __iomem *tcsr_mem;
+};
+
#ifdef CONFIG_ATH10K_AHB
int ath10k_ahb_init(void);
diff --git a/drivers/net/wireless/ath/ath10k/pci.h b/drivers/net/wireless/ath/ath10k/pci.h
index c2d4a79..249c73a 100644
--- a/drivers/net/wireless/ath/ath10k/pci.h
+++ b/drivers/net/wireless/ath/ath10k/pci.h
@@ -234,6 +234,12 @@ struct ath10k_pci {
bool pci_ps;
const struct ath10k_bus_ops *bus_ops;
+
+ /* Keep this entry in the last, memory for struct ath10k_ahb is
+ * allocated (ahb support enabled case) in the continuation of
+ * this struct.
+ */
+ struct ath10k_ahb ahb[0];
};
static inline struct ath10k_pci *ath10k_pci_priv(struct ath10k *ar)
--
1.8.1.2
WARNING: multiple messages have this Message-ID (diff)
From: Raja Mani <rmani@qti.qualcomm.com>
To: ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org, Raja Mani <rmani@qti.qualcomm.com>
Subject: [PATCH 06/12] ath10k: add helper functions in ahb.c for reg rd/wr
Date: Wed, 27 Jan 2016 15:24:27 +0530 [thread overview]
Message-ID: <1453888473-2879-7-git-send-email-rmani@qti.qualcomm.com> (raw)
In-Reply-To: <1453888473-2879-1-git-send-email-rmani@qti.qualcomm.com>
qca4019 deals with below register memory region to control the clock,
reset, etc.
- Memory to control wifi core
- gcc (outside of wifi)
- tcsr (outside of wifi)
Add new helper functions to perform read/write in above registers
spaces. Actual ioremap for above registers are done in later patch.
Struct ath10k_ahb is introduced to maintain ahb specific info and
memory this struct will be allocated in the continuation of struct
ath10k_pci (again, memory ath10k_ahb is allocated in the later patch).
Signed-off-by: Raja Mani <rmani@qti.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/ahb.c | 55 +++++++++++++++++++++++++++++++++++
drivers/net/wireless/ath/ath10k/ahb.h | 7 +++++
drivers/net/wireless/ath/ath10k/pci.h | 6 ++++
3 files changed, 68 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/ahb.c b/drivers/net/wireless/ath/ath10k/ahb.c
index 129f4f4..eab4b47 100644
--- a/drivers/net/wireless/ath/ath10k/ahb.c
+++ b/drivers/net/wireless/ath/ath10k/ahb.c
@@ -17,6 +17,7 @@
#include <linux/module.h>
#include "core.h"
#include "debug.h"
+#include "pci.h"
#include "ahb.h"
static const struct of_device_id ath10k_ahb_of_match[] = {
@@ -29,6 +30,60 @@ static const struct of_device_id ath10k_ahb_of_match[] = {
MODULE_DEVICE_TABLE(of, ath10k_ahb_of_match);
+static inline struct ath10k_ahb *ath10k_ahb_priv(struct ath10k *ar)
+{
+ return &((struct ath10k_pci *)ar->drv_priv)->ahb[0];
+}
+
+static void ath10k_ahb_write32(struct ath10k *ar, u32 offset, u32 value)
+{
+ struct ath10k_ahb *ar_ahb = ath10k_ahb_priv(ar);
+
+ iowrite32(value, ar_ahb->mem + offset);
+}
+
+static u32 ath10k_ahb_read32(struct ath10k *ar, u32 offset)
+{
+ struct ath10k_ahb *ar_ahb = ath10k_ahb_priv(ar);
+
+ return ioread32(ar_ahb->mem + offset);
+}
+
+static u32 ath10k_ahb_gcc_read32(struct ath10k *ar, u32 offset)
+{
+ struct ath10k_ahb *ar_ahb = ath10k_ahb_priv(ar);
+
+ return ioread32(ar_ahb->gcc_mem + offset);
+}
+
+static void ath10k_ahb_tcsr_write32(struct ath10k *ar, u32 offset, u32 value)
+{
+ struct ath10k_ahb *ar_ahb = ath10k_ahb_priv(ar);
+
+ iowrite32(value, ar_ahb->tcsr_mem + offset);
+}
+
+static u32 ath10k_ahb_tcsr_read32(struct ath10k *ar, u32 offset)
+{
+ struct ath10k_ahb *ar_ahb = ath10k_ahb_priv(ar);
+
+ return ioread32(ar_ahb->tcsr_mem + offset);
+}
+
+static u32 ath10k_ahb_soc_read32(struct ath10k *ar, u32 addr)
+{
+ return ath10k_ahb_read32(ar, RTC_SOC_BASE_ADDRESS + addr);
+}
+
+static int ath10k_ahb_get_num_banks(struct ath10k *ar)
+{
+ if (ar->hw_rev == ATH10K_HW_QCA4019)
+ return 1;
+
+ ath10k_warn(ar, "unknown number of banks, assuming 1\n");
+ return 1;
+}
+
static int ath10k_ahb_probe(struct platform_device *pdev)
{
return 0;
diff --git a/drivers/net/wireless/ath/ath10k/ahb.h b/drivers/net/wireless/ath/ath10k/ahb.h
index d1afe93..77d15af 100644
--- a/drivers/net/wireless/ath/ath10k/ahb.h
+++ b/drivers/net/wireless/ath/ath10k/ahb.h
@@ -20,6 +20,13 @@
#include <linux/platform_device.h>
+struct ath10k_ahb {
+ struct platform_device *pdev;
+ void __iomem *mem;
+ void __iomem *gcc_mem;
+ void __iomem *tcsr_mem;
+};
+
#ifdef CONFIG_ATH10K_AHB
int ath10k_ahb_init(void);
diff --git a/drivers/net/wireless/ath/ath10k/pci.h b/drivers/net/wireless/ath/ath10k/pci.h
index c2d4a79..249c73a 100644
--- a/drivers/net/wireless/ath/ath10k/pci.h
+++ b/drivers/net/wireless/ath/ath10k/pci.h
@@ -234,6 +234,12 @@ struct ath10k_pci {
bool pci_ps;
const struct ath10k_bus_ops *bus_ops;
+
+ /* Keep this entry in the last, memory for struct ath10k_ahb is
+ * allocated (ahb support enabled case) in the continuation of
+ * this struct.
+ */
+ struct ath10k_ahb ahb[0];
};
static inline struct ath10k_pci *ath10k_pci_priv(struct ath10k *ar)
--
1.8.1.2
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
next prev parent reply other threads:[~2016-01-27 9:57 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-27 9:54 [PATCH 00/12] add ahb (qca4019) support Raja Mani
2016-01-27 9:54 ` Raja Mani
2016-01-27 9:54 ` [PATCH 01/12] ath10k: make some of ath10k_pci_* func reusable Raja Mani
2016-01-27 9:54 ` Raja Mani
2016-01-27 9:54 ` [PATCH 02/12] ath10k: make ath10k_pci_read32/write32() ops more generic Raja Mani
2016-01-27 9:54 ` Raja Mani
2016-01-27 9:54 ` [PATCH 03/12] ath10k: pull reusable code from pci probe and remove for ahb Raja Mani
2016-01-27 9:54 ` Raja Mani
2016-01-27 9:54 ` [PATCH 04/12] ath10k: add basic skeleton to support ahb Raja Mani
2016-01-27 9:54 ` Raja Mani
2016-01-27 9:54 ` [PATCH 05/12] ath10k: include qca4019 register map table Raja Mani
2016-01-27 9:54 ` Raja Mani
2016-01-27 9:54 ` Raja Mani [this message]
2016-01-27 9:54 ` [PATCH 06/12] ath10k: add helper functions in ahb.c for reg rd/wr Raja Mani
2016-01-27 9:54 ` [PATCH 07/12] ath10k: add clock ctrl related functions in ahb Raja Mani
2016-01-27 9:54 ` Raja Mani
2016-01-27 9:54 ` [PATCH 08/12] ath10k: add reset " Raja Mani
2016-01-27 9:54 ` Raja Mani
2016-01-27 9:54 ` [PATCH 09/12] ath10k: add chip and bus halt logic " Raja Mani
2016-01-27 9:54 ` Raja Mani
2016-01-27 9:54 ` [PATCH 10/12] ath10k: include irq related functions " Raja Mani
2016-01-27 9:54 ` Raja Mani
2016-01-27 9:54 ` [PATCH 11/12] ath10k: add resource init and deinit " Raja Mani
2016-01-27 9:54 ` Raja Mani
2016-01-27 9:54 ` [PATCH 12/12] ath10k: expose hif ops for ahb Raja Mani
2016-01-27 9:54 ` Raja Mani
2016-02-02 11:19 ` [PATCH 00/12] add ahb (qca4019) support Kalle Valo
2016-02-02 11:19 ` Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1453888473-2879-7-git-send-email-rmani@qti.qualcomm.com \
--to=rmani@qti.qualcomm.com \
--cc=ath10k@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.