From: Geert Uytterhoeven <geert+renesas@glider.be>
To: Simon Horman <horms@verge.net.au>, Magnus Damm <magnus.damm@gmail.com>
Cc: linux-renesas-soc@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>,
Geert Uytterhoeven <geert+renesas@glider.be>
Subject: [PATCH v4 06/11] ARM: dts: r8a7779: Rename the serial port clock to fck
Date: Fri, 29 Jan 2016 10:47:36 +0100 [thread overview]
Message-ID: <1454060861-2375-7-git-send-email-geert+renesas@glider.be> (raw)
In-Reply-To: <1454060861-2375-1-git-send-email-geert+renesas@glider.be>
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The clock is really the device functional clock, not the interface
clock. Rename it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v4:
- Change one-line summary prefix to match current arm-soc practices,
v3:
- No changes,
v2:
- Add Acked-by.
---
arch/arm/boot/dts/r8a7779.dtsi | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index 1671839f55a6349c..8fddfae13865f536 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -216,7 +216,7 @@
reg = <0xffe40000 0x100>;
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_SCIF0>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -227,7 +227,7 @@
reg = <0xffe41000 0x100>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_SCIF1>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -238,7 +238,7 @@
reg = <0xffe42000 0x100>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_SCIF2>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -249,7 +249,7 @@
reg = <0xffe43000 0x100>;
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_SCIF3>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -260,7 +260,7 @@
reg = <0xffe44000 0x100>;
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_SCIF4>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -271,7 +271,7 @@
reg = <0xffe45000 0x100>;
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_SCIF5>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&cpg_clocks>;
status = "disabled";
};
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: geert+renesas@glider.be (Geert Uytterhoeven)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 06/11] ARM: dts: r8a7779: Rename the serial port clock to fck
Date: Fri, 29 Jan 2016 10:47:36 +0100 [thread overview]
Message-ID: <1454060861-2375-7-git-send-email-geert+renesas@glider.be> (raw)
In-Reply-To: <1454060861-2375-1-git-send-email-geert+renesas@glider.be>
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The clock is really the device functional clock, not the interface
clock. Rename it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v4:
- Change one-line summary prefix to match current arm-soc practices,
v3:
- No changes,
v2:
- Add Acked-by.
---
arch/arm/boot/dts/r8a7779.dtsi | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index 1671839f55a6349c..8fddfae13865f536 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -216,7 +216,7 @@
reg = <0xffe40000 0x100>;
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_SCIF0>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -227,7 +227,7 @@
reg = <0xffe41000 0x100>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_SCIF1>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -238,7 +238,7 @@
reg = <0xffe42000 0x100>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_SCIF2>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -249,7 +249,7 @@
reg = <0xffe43000 0x100>;
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_SCIF3>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -260,7 +260,7 @@
reg = <0xffe44000 0x100>;
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_SCIF4>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -271,7 +271,7 @@
reg = <0xffe45000 0x100>;
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_SCIF5>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&cpg_clocks>;
status = "disabled";
};
--
1.9.1
next prev parent reply other threads:[~2016-01-29 9:47 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-29 9:47 [PATCH v4 00/11] ARM: dts: shmobile: Rename the serial port clock to fck Geert Uytterhoeven
2016-01-29 9:47 ` Geert Uytterhoeven
2016-01-29 9:47 ` [PATCH v4 01/11] ARM: dts: sh73a0: " Geert Uytterhoeven
2016-01-29 9:47 ` Geert Uytterhoeven
[not found] ` <1454060861-2375-1-git-send-email-geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
2016-01-29 9:47 ` [PATCH v4 02/11] ARM: dts: r7s72100: " Geert Uytterhoeven
2016-01-29 9:47 ` Geert Uytterhoeven
2016-01-29 9:47 ` Geert Uytterhoeven
2016-01-29 9:47 ` [PATCH v4 10/11] ARM: dts: r8a7794: " Geert Uytterhoeven
2016-01-29 9:47 ` Geert Uytterhoeven
2016-01-29 9:47 ` Geert Uytterhoeven
2016-01-29 9:47 ` [PATCH v4 11/11] arm64: dts: r8a7795: " Geert Uytterhoeven
2016-01-29 9:47 ` Geert Uytterhoeven
2016-01-29 9:47 ` Geert Uytterhoeven
2016-01-29 9:47 ` [PATCH v4 03/11] ARM: dts: r8a73a4: " Geert Uytterhoeven
2016-01-29 9:47 ` Geert Uytterhoeven
2016-01-29 9:47 ` [PATCH v4 04/11] ARM: dts: r8a7740: " Geert Uytterhoeven
2016-01-29 9:47 ` Geert Uytterhoeven
2016-01-29 9:47 ` [PATCH v4 05/11] ARM: dts: r8a7778: " Geert Uytterhoeven
2016-01-29 9:47 ` Geert Uytterhoeven
2016-01-29 9:47 ` Geert Uytterhoeven [this message]
2016-01-29 9:47 ` [PATCH v4 06/11] ARM: dts: r8a7779: " Geert Uytterhoeven
2016-01-29 9:47 ` [PATCH v4 07/11] ARM: dts: r8a7790: " Geert Uytterhoeven
2016-01-29 9:47 ` Geert Uytterhoeven
2016-01-29 9:47 ` [PATCH v4 08/11] ARM: dts: r8a7791: " Geert Uytterhoeven
2016-01-29 9:47 ` Geert Uytterhoeven
2016-01-29 9:47 ` [PATCH v4 09/11] ARM: dts: r8a7793: " Geert Uytterhoeven
2016-01-29 9:47 ` Geert Uytterhoeven
2016-02-02 10:12 ` [PATCH v4 00/11] ARM: dts: shmobile: " Simon Horman
2016-02-02 10:12 ` Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1454060861-2375-7-git-send-email-geert+renesas@glider.be \
--to=geert+renesas@glider.be \
--cc=devicetree@vger.kernel.org \
--cc=horms@verge.net.au \
--cc=laurent.pinchart+renesas@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.