From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
To: horms@verge.net.au, magnus.damm@gmail.com, robh+dt@kernel.org,
pawel.moll@arm.com, mark.rutland@arm.com,
ijc+devicetree@hellion.org.uk, galak@codeaurora.org
Cc: devicetree@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Subject: [PATCH/RFC 00/10] Add support for USB2.0 host/peripheral on R-Car H3
Date: Tue, 2 Feb 2016 19:18:48 +0900 [thread overview]
Message-ID: <1454408338-4612-1-git-send-email-yoshihiro.shimoda.uh@renesas.com> (raw)
This patch set is based on the renesas-drivers.git /
renesas-drivers-2016-01-26-v4.5-rc1 tag
(commit id = 106b6565bfb6e2f35339347f3cfd0858f08bfcaa),
and the following patches:
[ renesas_usbhs driver ]
http://thread.gmane.org/gmane.linux.usb.general/135895
[ generic phy driver for R-Car H3 ]
http://thread.gmane.org/gmane.linux.kernel/2120685
This patch set contains patches that are related to generic phy driver.
As I wrote a comment in patch 8, to handle VBUS on/off for USB2.0 host
channel 0, I use a regulator driver instead of extcon/max3355 driver.
This is a reason that I marked this patch set is a RFC because I'm not
sure that this way is acceptable or not.
Also patch 6 should resolve checkpatch.pl warnings, and patch 7 should
have dmas property to use USB-DMAC.
Takeshi Kihara (1):
pinctrl: sh-pfc: r8a7795: Add USB2.0 host support
Yoshihiro Shimoda (9):
phy: rcar-gen3-usb2: Add phy-supply description in device tree doc
phy: rcar-gen3-usb2: remove unnecesary struct rcar_gen3_data
phy: rcar-gen3-usb2: add extcon support
arm64: dts: r8a7795: add usb2_phy device nodes
arm64: dts: r8a7795: add USB2.0 Host (EHCI/OHCI) device nodes
arm64: dts: r8a7795: add HS-USB device node
arm64: dts: salvator-x: enable usb2_phy
arm64: dts: salvator-x: enable USB 2.0 Host channels
arm64: dts: salvator-x: enable HS-USB
.../devicetree/bindings/phy/rcar-gen3-phy-usb2.txt | 2 +
arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts | 73 +++++++++++++-
arch/arm64/boot/dts/renesas/r8a7795.dtsi | 107 +++++++++++++++++++++
drivers/phy/Kconfig | 1 +
drivers/phy/phy-rcar-gen3-usb2.c | 59 ++++++++----
drivers/pinctrl/sh-pfc/pfc-r8a7795.c | 43 +++++++++
6 files changed, 265 insertions(+), 20 deletions(-)
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
To: <horms@verge.net.au>, <magnus.damm@gmail.com>,
<robh+dt@kernel.org>, <pawel.moll@arm.com>,
<mark.rutland@arm.com>, <ijc+devicetree@hellion.org.uk>,
<galak@codeaurora.org>
Cc: <devicetree@vger.kernel.org>, <linux-renesas-soc@vger.kernel.org>,
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Subject: [PATCH/RFC 00/10] Add support for USB2.0 host/peripheral on R-Car H3
Date: Tue, 2 Feb 2016 19:18:48 +0900 [thread overview]
Message-ID: <1454408338-4612-1-git-send-email-yoshihiro.shimoda.uh@renesas.com> (raw)
This patch set is based on the renesas-drivers.git /
renesas-drivers-2016-01-26-v4.5-rc1 tag
(commit id = 106b6565bfb6e2f35339347f3cfd0858f08bfcaa),
and the following patches:
[ renesas_usbhs driver ]
http://thread.gmane.org/gmane.linux.usb.general/135895
[ generic phy driver for R-Car H3 ]
http://thread.gmane.org/gmane.linux.kernel/2120685
This patch set contains patches that are related to generic phy driver.
As I wrote a comment in patch 8, to handle VBUS on/off for USB2.0 host
channel 0, I use a regulator driver instead of extcon/max3355 driver.
This is a reason that I marked this patch set is a RFC because I'm not
sure that this way is acceptable or not.
Also patch 6 should resolve checkpatch.pl warnings, and patch 7 should
have dmas property to use USB-DMAC.
Takeshi Kihara (1):
pinctrl: sh-pfc: r8a7795: Add USB2.0 host support
Yoshihiro Shimoda (9):
phy: rcar-gen3-usb2: Add phy-supply description in device tree doc
phy: rcar-gen3-usb2: remove unnecesary struct rcar_gen3_data
phy: rcar-gen3-usb2: add extcon support
arm64: dts: r8a7795: add usb2_phy device nodes
arm64: dts: r8a7795: add USB2.0 Host (EHCI/OHCI) device nodes
arm64: dts: r8a7795: add HS-USB device node
arm64: dts: salvator-x: enable usb2_phy
arm64: dts: salvator-x: enable USB 2.0 Host channels
arm64: dts: salvator-x: enable HS-USB
.../devicetree/bindings/phy/rcar-gen3-phy-usb2.txt | 2 +
arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts | 73 +++++++++++++-
arch/arm64/boot/dts/renesas/r8a7795.dtsi | 107 +++++++++++++++++++++
drivers/phy/Kconfig | 1 +
drivers/phy/phy-rcar-gen3-usb2.c | 59 ++++++++----
drivers/pinctrl/sh-pfc/pfc-r8a7795.c | 43 +++++++++
6 files changed, 265 insertions(+), 20 deletions(-)
--
1.9.1
next reply other threads:[~2016-02-02 10:18 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-02 10:18 Yoshihiro Shimoda [this message]
2016-02-02 10:18 ` [PATCH/RFC 00/10] Add support for USB2.0 host/peripheral on R-Car H3 Yoshihiro Shimoda
2016-02-02 10:18 ` [PATCH/RFC 01/10] pinctrl: sh-pfc: r8a7795: Add USB2.0 host support Yoshihiro Shimoda
2016-02-02 10:18 ` Yoshihiro Shimoda
2016-02-08 15:58 ` Geert Uytterhoeven
2016-02-02 10:18 ` [PATCH/RFC 02/10] phy: rcar-gen3-usb2: Add phy-supply description in device tree doc Yoshihiro Shimoda
2016-02-02 10:18 ` Yoshihiro Shimoda
2016-02-03 20:45 ` Rob Herring
2016-02-04 8:49 ` Yoshihiro Shimoda
2016-02-02 10:18 ` [PATCH/RFC 03/10] phy: rcar-gen3-usb2: remove unnecesary struct rcar_gen3_data Yoshihiro Shimoda
2016-02-02 10:18 ` Yoshihiro Shimoda
2016-02-02 10:18 ` [PATCH/RFC 04/10] phy: rcar-gen3-usb2: add extcon support Yoshihiro Shimoda
2016-02-02 10:18 ` Yoshihiro Shimoda
2016-02-02 10:18 ` [PATCH/RFC 05/10] arm64: dts: r8a7795: add usb2_phy device nodes Yoshihiro Shimoda
2016-02-02 10:18 ` Yoshihiro Shimoda
2016-02-02 10:18 ` [PATCH/RFC 06/10] arm64: dts: r8a7795: add USB2.0 Host (EHCI/OHCI) " Yoshihiro Shimoda
2016-02-02 10:18 ` Yoshihiro Shimoda
2016-02-02 10:18 ` [PATCH/RFC 07/10] arm64: dts: r8a7795: add HS-USB device node Yoshihiro Shimoda
2016-02-02 10:18 ` Yoshihiro Shimoda
2016-02-02 10:18 ` [PATCH/RFC 08/10] arm64: dts: salvator-x: enable usb2_phy Yoshihiro Shimoda
2016-02-02 10:18 ` Yoshihiro Shimoda
2016-02-02 10:18 ` [PATCH/RFC 09/10] arm64: dts: salvator-x: enable USB 2.0 Host channels Yoshihiro Shimoda
2016-02-02 10:18 ` Yoshihiro Shimoda
2016-02-02 10:18 ` [PATCH/RFC 10/10] arm64: dts: salvator-x: enable HS-USB Yoshihiro Shimoda
2016-02-02 10:18 ` Yoshihiro Shimoda
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1454408338-4612-1-git-send-email-yoshihiro.shimoda.uh@renesas.com \
--to=yoshihiro.shimoda.uh@renesas.com \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=horms@verge.net.au \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.