From: Masahiro Yamada <yamada.masahiro@socionext.com> To: arm@kernel.org Cc: Masahiro Yamada <yamada.masahiro@socionext.com>, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Subject: [PATCH 0/9] ARM: uniphier: UniPhier updates for Linux 4.6-rc1 Date: Tue, 16 Feb 2016 11:15:02 +0900 [thread overview] Message-ID: <1455588911-9827-1-git-send-email-yamada.masahiro@socionext.com> (raw) Hi Arnd and Olof, Here is a series I want you to apply to ASOC. I know this series includes DT updates for ARM 32bit and ARM 64bit, but this is intentional. Please apply the whole series to one branch. Otherwise, it would cause a build error and big conflicts. (some DT files are shared between arch/arm and arch/arm64, so it is impossible to split the series into two.) Masahiro Yamada (9): ARM: dts: uniphier: factor out ranges property of support card ARM: dts: uniphier: rework UniPhier System Bus nodes ARM: uniphier: add missing of_node_put() ARM: dts: uniphier: add reference clock nodes ARM: dts: uniphier: add EEPROM node for ProXstream2 Gentil board ARM: dts: uniphier: enable I2C channel 2 of ProXstream2 Gentil board ARM: dts: uniphier: add PH1-Pro4 Ace board support ARM: dts: uniphier: add PH1-Pro4 Sanji board support ARM: dts: uniphier: add @{address} to EEPROM node arch/arm/boot/dts/Makefile | 2 + arch/arm/boot/dts/uniphier-common32.dtsi | 26 +++-- arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts | 8 -- arch/arm/boot/dts/uniphier-ph1-ld4.dtsi | 4 + arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts | 8 -- arch/arm/boot/dts/uniphier-ph1-pro4-ace.dts | 113 +++++++++++++++++++++ arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts | 8 -- arch/arm/boot/dts/uniphier-ph1-pro4-sanji.dts | 108 ++++++++++++++++++++ arch/arm/boot/dts/uniphier-ph1-pro4.dtsi | 4 + arch/arm/boot/dts/uniphier-ph1-pro5.dtsi | 4 + arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts | 8 -- arch/arm/boot/dts/uniphier-ph1-sld3.dtsi | 25 +++-- arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts | 8 -- arch/arm/boot/dts/uniphier-ph1-sld8.dtsi | 4 + arch/arm/boot/dts/uniphier-proxstream2-gentil.dts | 10 ++ arch/arm/boot/dts/uniphier-proxstream2.dtsi | 4 + arch/arm/boot/dts/uniphier-ref-daughter.dtsi | 2 +- arch/arm/boot/dts/uniphier-support-card.dtsi | 5 +- arch/arm/mach-uniphier/platsmp.c | 12 +-- .../boot/dts/socionext/uniphier-ph1-ld10-ref.dts | 8 -- .../boot/dts/socionext/uniphier-ph1-ld10.dtsi | 18 ++-- 21 files changed, 309 insertions(+), 80 deletions(-) create mode 100644 arch/arm/boot/dts/uniphier-ph1-pro4-ace.dts create mode 100644 arch/arm/boot/dts/uniphier-ph1-pro4-sanji.dts -- 1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: yamada.masahiro@socionext.com (Masahiro Yamada) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 0/9] ARM: uniphier: UniPhier updates for Linux 4.6-rc1 Date: Tue, 16 Feb 2016 11:15:02 +0900 [thread overview] Message-ID: <1455588911-9827-1-git-send-email-yamada.masahiro@socionext.com> (raw) Hi Arnd and Olof, Here is a series I want you to apply to ASOC. I know this series includes DT updates for ARM 32bit and ARM 64bit, but this is intentional. Please apply the whole series to one branch. Otherwise, it would cause a build error and big conflicts. (some DT files are shared between arch/arm and arch/arm64, so it is impossible to split the series into two.) Masahiro Yamada (9): ARM: dts: uniphier: factor out ranges property of support card ARM: dts: uniphier: rework UniPhier System Bus nodes ARM: uniphier: add missing of_node_put() ARM: dts: uniphier: add reference clock nodes ARM: dts: uniphier: add EEPROM node for ProXstream2 Gentil board ARM: dts: uniphier: enable I2C channel 2 of ProXstream2 Gentil board ARM: dts: uniphier: add PH1-Pro4 Ace board support ARM: dts: uniphier: add PH1-Pro4 Sanji board support ARM: dts: uniphier: add @{address} to EEPROM node arch/arm/boot/dts/Makefile | 2 + arch/arm/boot/dts/uniphier-common32.dtsi | 26 +++-- arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts | 8 -- arch/arm/boot/dts/uniphier-ph1-ld4.dtsi | 4 + arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts | 8 -- arch/arm/boot/dts/uniphier-ph1-pro4-ace.dts | 113 +++++++++++++++++++++ arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts | 8 -- arch/arm/boot/dts/uniphier-ph1-pro4-sanji.dts | 108 ++++++++++++++++++++ arch/arm/boot/dts/uniphier-ph1-pro4.dtsi | 4 + arch/arm/boot/dts/uniphier-ph1-pro5.dtsi | 4 + arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts | 8 -- arch/arm/boot/dts/uniphier-ph1-sld3.dtsi | 25 +++-- arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts | 8 -- arch/arm/boot/dts/uniphier-ph1-sld8.dtsi | 4 + arch/arm/boot/dts/uniphier-proxstream2-gentil.dts | 10 ++ arch/arm/boot/dts/uniphier-proxstream2.dtsi | 4 + arch/arm/boot/dts/uniphier-ref-daughter.dtsi | 2 +- arch/arm/boot/dts/uniphier-support-card.dtsi | 5 +- arch/arm/mach-uniphier/platsmp.c | 12 +-- .../boot/dts/socionext/uniphier-ph1-ld10-ref.dts | 8 -- .../boot/dts/socionext/uniphier-ph1-ld10.dtsi | 18 ++-- 21 files changed, 309 insertions(+), 80 deletions(-) create mode 100644 arch/arm/boot/dts/uniphier-ph1-pro4-ace.dts create mode 100644 arch/arm/boot/dts/uniphier-ph1-pro4-sanji.dts -- 1.9.1
next reply other threads:[~2016-02-16 2:16 UTC|newest] Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-02-16 2:15 Masahiro Yamada [this message] 2016-02-16 2:15 ` [PATCH 0/9] ARM: uniphier: UniPhier updates for Linux 4.6-rc1 Masahiro Yamada 2016-02-16 2:15 ` [PATCH 1/9] ARM: dts: uniphier: factor out ranges property of support card Masahiro Yamada 2016-02-16 2:15 ` Masahiro Yamada 2016-02-16 2:15 ` [PATCH 2/9] ARM: dts: uniphier: rework UniPhier System Bus nodes Masahiro Yamada 2016-02-16 2:15 ` Masahiro Yamada 2016-02-25 0:26 ` Olof Johansson 2016-02-25 0:26 ` Olof Johansson 2016-02-25 2:22 ` Masahiro Yamada 2016-02-25 2:22 ` Masahiro Yamada 2016-02-25 7:20 ` Olof Johansson 2016-02-25 7:20 ` Olof Johansson 2016-02-26 7:21 ` Masahiro Yamada 2016-02-26 7:21 ` Masahiro Yamada 2016-02-16 2:15 ` [PATCH 3/9] ARM: uniphier: add missing of_node_put() Masahiro Yamada 2016-02-16 2:15 ` Masahiro Yamada 2016-02-16 2:15 ` [PATCH 4/9] ARM: dts: uniphier: add reference clock nodes Masahiro Yamada 2016-02-16 2:15 ` Masahiro Yamada 2016-02-16 2:15 ` [PATCH 5/9] ARM: dts: uniphier: add EEPROM node for ProXstream2 Gentil board Masahiro Yamada 2016-02-16 2:15 ` Masahiro Yamada 2016-02-16 2:15 ` [PATCH 6/9] ARM: dts: uniphier: enable I2C channel 2 of " Masahiro Yamada 2016-02-16 2:15 ` Masahiro Yamada 2016-02-16 2:15 ` [PATCH 7/9] ARM: dts: uniphier: add PH1-Pro4 Ace board support Masahiro Yamada 2016-02-16 2:15 ` Masahiro Yamada 2016-02-16 2:15 ` [PATCH 8/9] ARM: dts: uniphier: add PH1-Pro4 Sanji " Masahiro Yamada 2016-02-16 2:15 ` Masahiro Yamada 2016-02-16 2:15 ` [PATCH 9/9] ARM: dts: uniphier: add @{address} to EEPROM node Masahiro Yamada 2016-02-16 2:15 ` Masahiro Yamada
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1455588911-9827-1-git-send-email-yamada.masahiro@socionext.com \ --to=yamada.masahiro@socionext.com \ --cc=arm@kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.