From: Wei Ni <wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org> To: edubezval-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org, thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org, robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, rui.zhang-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org Cc: MLongnecker-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org, swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org, mikko.perttunen-/1wQRMveznE@public.gmane.org, linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-pm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Wei Ni <wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org> Subject: [PATCH 2/9] arm64: tegra: use tegra132-soctherm for Tegra132 Date: Thu, 31 Mar 2016 16:44:01 +0800 [thread overview] Message-ID: <1459413848-5405-3-git-send-email-wni@nvidia.com> (raw) In-Reply-To: <1459413848-5405-1-git-send-email-wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org> The Tegra132 has the specific settings for soctherm, so change to use campatible "nvidia,tegra132-soctherm" for it. And adds cpu, gpu, mem and pllx thermal zones. Signed-off-by: Wei Ni <wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org> --- arch/arm64/boot/dts/nvidia/tegra132.dtsi | 34 +++++++++++++++++++++++++++++++- 1 file changed, 33 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi index 6e28e41d7e3e..bd5010a7cba4 100644 --- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi @@ -4,6 +4,7 @@ #include <dt-bindings/pinctrl/pinctrl-tegra.h> #include <dt-bindings/pinctrl/pinctrl-tegra-xusb.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/thermal/tegra124-soctherm.h> / { compatible = "nvidia,tegra132", "nvidia,tegra124"; @@ -727,7 +728,7 @@ }; soctherm: thermal-sensor@0,700e2000 { - compatible = "nvidia,tegra124-soctherm"; + compatible = "nvidia,tegra132-soctherm"; reg = <0x0 0x700e2000 0x0 0x1000>; interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA124_CLK_TSENSOR>, @@ -738,6 +739,37 @@ #thermal-sensor-cells = <1>; }; + thermal-zones { + cpu { + polling-delay-passive = <1000>; + polling-delay = <0>; + + thermal-sensors = + <&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>; + }; + mem { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = + <&soctherm TEGRA124_SOCTHERM_SENSOR_MEM>; + }; + gpu { + polling-delay-passive = <1000>; + polling-delay = <0>; + + thermal-sensors = + <&soctherm TEGRA124_SOCTHERM_SENSOR_GPU>; + }; + pllx { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = + <&soctherm TEGRA124_SOCTHERM_SENSOR_PLLX>; + }; + }; + ahub@0,70300000 { compatible = "nvidia,tegra124-ahub"; reg = <0x0 0x70300000 0x0 0x200>, -- 1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: Wei Ni <wni@nvidia.com> To: <edubezval@gmail.com>, <thierry.reding@gmail.com>, <robh+dt@kernel.org>, <rui.zhang@intel.com> Cc: <MLongnecker@nvidia.com>, <swarren@wwwdotorg.org>, <mikko.perttunen@kapsi.fi>, <linux-tegra@vger.kernel.org>, <linux-pm@vger.kernel.org>, <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>, Wei Ni <wni@nvidia.com> Subject: [PATCH 2/9] arm64: tegra: use tegra132-soctherm for Tegra132 Date: Thu, 31 Mar 2016 16:44:01 +0800 [thread overview] Message-ID: <1459413848-5405-3-git-send-email-wni@nvidia.com> (raw) In-Reply-To: <1459413848-5405-1-git-send-email-wni@nvidia.com> The Tegra132 has the specific settings for soctherm, so change to use campatible "nvidia,tegra132-soctherm" for it. And adds cpu, gpu, mem and pllx thermal zones. Signed-off-by: Wei Ni <wni@nvidia.com> --- arch/arm64/boot/dts/nvidia/tegra132.dtsi | 34 +++++++++++++++++++++++++++++++- 1 file changed, 33 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi index 6e28e41d7e3e..bd5010a7cba4 100644 --- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi @@ -4,6 +4,7 @@ #include <dt-bindings/pinctrl/pinctrl-tegra.h> #include <dt-bindings/pinctrl/pinctrl-tegra-xusb.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/thermal/tegra124-soctherm.h> / { compatible = "nvidia,tegra132", "nvidia,tegra124"; @@ -727,7 +728,7 @@ }; soctherm: thermal-sensor@0,700e2000 { - compatible = "nvidia,tegra124-soctherm"; + compatible = "nvidia,tegra132-soctherm"; reg = <0x0 0x700e2000 0x0 0x1000>; interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA124_CLK_TSENSOR>, @@ -738,6 +739,37 @@ #thermal-sensor-cells = <1>; }; + thermal-zones { + cpu { + polling-delay-passive = <1000>; + polling-delay = <0>; + + thermal-sensors = + <&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>; + }; + mem { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = + <&soctherm TEGRA124_SOCTHERM_SENSOR_MEM>; + }; + gpu { + polling-delay-passive = <1000>; + polling-delay = <0>; + + thermal-sensors = + <&soctherm TEGRA124_SOCTHERM_SENSOR_GPU>; + }; + pllx { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = + <&soctherm TEGRA124_SOCTHERM_SENSOR_PLLX>; + }; + }; + ahub@0,70300000 { compatible = "nvidia,tegra124-ahub"; reg = <0x0 0x70300000 0x0 0x200>, -- 1.9.1
next prev parent reply other threads:[~2016-03-31 8:44 UTC|newest] Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-03-31 8:43 [PATCH 0/9] Add HW throttle for Tegra soctherm Wei Ni 2016-03-31 8:43 ` Wei Ni 2016-03-31 8:44 ` [PATCH 1/9] thermal: tegra: add Tegra132 specific SOC_THERM driver Wei Ni 2016-03-31 8:44 ` Wei Ni [not found] ` <1459413848-5405-1-git-send-email-wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org> 2016-03-31 8:44 ` Wei Ni [this message] 2016-03-31 8:44 ` [PATCH 2/9] arm64: tegra: use tegra132-soctherm for Tegra132 Wei Ni 2016-03-31 8:44 ` [PATCH 3/9] arm64: tegra: set critical trips " Wei Ni 2016-03-31 8:44 ` Wei Ni 2016-03-31 8:44 ` [PATCH 4/9] of: Add bindings of hw throttle for soctherm Wei Ni 2016-03-31 8:44 ` Wei Ni 2016-03-31 8:44 ` [PATCH 5/9] thermal: tegra: add hw-throttle function Wei Ni 2016-03-31 8:44 ` Wei Ni 2016-03-31 8:44 ` [PATCH 6/9] thermal: tegra: add hw-throttle for Tegra132 Wei Ni 2016-03-31 8:44 ` Wei Ni 2016-03-31 8:44 ` [PATCH 7/9] arm64: tegra: set hot trips for Tegra210 Wei Ni 2016-03-31 8:44 ` Wei Ni 2016-03-31 8:44 ` [PATCH 8/9] arm64: tegra: set hot trips for Tegra132 Wei Ni 2016-03-31 8:44 ` Wei Ni 2016-03-31 8:44 ` [PATCH 9/9] arm: tegra: set hot trips for Tegra124 Wei Ni 2016-03-31 8:44 ` Wei Ni 2016-03-31 8:50 ` [PATCH 0/9] Add HW throttle for Tegra soctherm Wei Ni 2016-03-31 8:50 ` Wei Ni
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1459413848-5405-3-git-send-email-wni@nvidia.com \ --to=wni-ddmlm1+adcrqt0dzr+alfa@public.gmane.org \ --cc=MLongnecker-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \ --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \ --cc=edubezval-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \ --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \ --cc=linux-pm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \ --cc=linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \ --cc=mikko.perttunen-/1wQRMveznE@public.gmane.org \ --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \ --cc=rui.zhang-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \ --cc=swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org \ --cc=thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.