From: Wadim Egorov <w.egorov@phytec.de>
To: linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
rtc-linux@googlegroups.com, devicetree@vger.kernel.org,
linux-rockchip@lists.infradead.org
Cc: robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com,
ijc+devicetree@hellion.org.uk, galak@codeaurora.org,
mturquette@baylibre.com, sboyd@codeaurora.org,
lee.jones@linaro.org, lgirdwood@gmail.com, broonie@kernel.org,
a.zummo@towertech.it, alexandre.belloni@free-electrons.com,
dianders@chromium.org, zyw@rock-chips.com
Subject: [PATCH v2 3/7] regulator: rk808: Migrate to regulator core's simplified DT parsing code
Date: Thu, 21 Apr 2016 15:12:37 +0200 [thread overview]
Message-ID: <1461244361-45686-4-git-send-email-w.egorov@phytec.de> (raw)
In-Reply-To: <1461244361-45686-1-git-send-email-w.egorov@phytec.de>
A common simplified DT parsing code for regulators was introduced in
commit a0c7b164ad11 ("regulator: of: Provide simplified DT parsing
method")
While at it also added RK8XX_DESC and RK8XX_DESC_SWITCH macros for the
regulator_desc struct initialization. This just makes the driver more compact.
Remove also linear ranges definitions with only one range.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
---
drivers/regulator/rk808-regulator.c | 308 +++++++++++++-----------------------
1 file changed, 114 insertions(+), 194 deletions(-)
diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c
index 37aaba9..2c529fa 100644
--- a/drivers/regulator/rk808-regulator.c
+++ b/drivers/regulator/rk808-regulator.c
@@ -55,6 +55,42 @@
/* max steps for increase voltage of Buck1/2, equal 100mv*/
#define MAX_STEPS_ONE_TIME 8
+#define RK8XX_DESC(_id, _match, _supply, _min, _max, _step, _vreg, \
+ _vmask, _ereg, _emask, _etime) \
+ [_id] = { \
+ .name = (_match), \
+ .supply_name = (_supply), \
+ .of_match = of_match_ptr(_match), \
+ .regulators_node = of_match_ptr("regulators"), \
+ .type = REGULATOR_VOLTAGE, \
+ .id = (_id), \
+ .n_voltages = (((_max) - (_min)) / (_step) + 1), \
+ .owner = THIS_MODULE, \
+ .min_uV = (_min) * 1000, \
+ .uV_step = (_step) * 1000, \
+ .vsel_reg = (_vreg), \
+ .vsel_mask = (_vmask), \
+ .enable_reg = (_ereg), \
+ .enable_mask = (_emask), \
+ .enable_time = (_etime), \
+ .ops = &rk808_reg_ops, \
+ }
+
+#define RK8XX_DESC_SWITCH(_id, _match, _supply, _ereg, _emask) \
+ [_id] = { \
+ .name = (_match), \
+ .supply_name = (_supply), \
+ .of_match = of_match_ptr(_match), \
+ .regulators_node = of_match_ptr("regulators"), \
+ .type = REGULATOR_VOLTAGE, \
+ .id = (_id), \
+ .enable_reg = (_ereg), \
+ .enable_mask = (_emask), \
+ .owner = THIS_MODULE, \
+ .ops = &rk808_switch_ops \
+ }
+
+
struct rk808_regulator_data {
struct gpio_desc *dvs_gpio[2];
};
@@ -66,27 +102,11 @@ static const int rk808_buck_config_regs[] = {
RK808_BUCK4_CONFIG_REG,
};
-static const struct regulator_linear_range rk808_buck_voltage_ranges[] = {
- REGULATOR_LINEAR_RANGE(712500, 0, 63, 12500),
-};
-
-static const struct regulator_linear_range rk808_buck4_voltage_ranges[] = {
- REGULATOR_LINEAR_RANGE(1800000, 0, 15, 100000),
-};
-
-static const struct regulator_linear_range rk808_ldo_voltage_ranges[] = {
- REGULATOR_LINEAR_RANGE(1800000, 0, 16, 100000),
-};
-
static const struct regulator_linear_range rk808_ldo3_voltage_ranges[] = {
REGULATOR_LINEAR_RANGE(800000, 0, 13, 100000),
REGULATOR_LINEAR_RANGE(2500000, 15, 15, 0),
};
-static const struct regulator_linear_range rk808_ldo6_voltage_ranges[] = {
- REGULATOR_LINEAR_RANGE(800000, 0, 17, 100000),
-};
-
static int rk808_buck1_2_get_voltage_sel_regmap(struct regulator_dev *rdev)
{
struct rk808_regulator_data *pdata = rdev_get_drvdata(rdev);
@@ -239,7 +259,7 @@ static int rk808_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
RK808_RAMP_RATE_MASK, ramp_value);
}
-static int rk808_set_suspend_voltage(struct regulator_dev *rdev, int uv)
+static int rk808_set_suspend_voltage_range(struct regulator_dev *rdev, int uv)
{
unsigned int reg;
int sel = regulator_map_voltage_linear_range(rdev, uv, uv);
@@ -254,6 +274,21 @@ static int rk808_set_suspend_voltage(struct regulator_dev *rdev, int uv)
sel);
}
+static int rk808_set_suspend_voltage(struct regulator_dev *rdev, int uv)
+{
+ unsigned int reg;
+ int sel = regulator_map_voltage_linear(rdev, uv, uv);
+
+ if (sel < 0)
+ return -EINVAL;
+
+ reg = rdev->desc->vsel_reg + RK808_SLP_REG_OFFSET;
+
+ return regmap_update_bits(rdev->regmap, reg,
+ rdev->desc->vsel_mask,
+ sel);
+}
+
static int rk808_set_suspend_enable(struct regulator_dev *rdev)
{
unsigned int reg;
@@ -291,7 +326,7 @@ static struct regulator_ops rk808_buck1_2_ops = {
.set_suspend_disable = rk808_set_suspend_disable,
};
-static struct regulator_ops rk808_reg_ops = {
+static struct regulator_ops rk808_reg_ops_ranges = {
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
@@ -299,6 +334,19 @@ static struct regulator_ops rk808_reg_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
+ .set_suspend_voltage = rk808_set_suspend_voltage_range,
+ .set_suspend_enable = rk808_set_suspend_enable,
+ .set_suspend_disable = rk808_set_suspend_disable,
+};
+
+static struct regulator_ops rk808_reg_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
.set_suspend_voltage = rk808_set_suspend_voltage,
.set_suspend_enable = rk808_set_suspend_enable,
.set_suspend_disable = rk808_set_suspend_disable,
@@ -316,12 +364,14 @@ static const struct regulator_desc rk808_reg[] = {
{
.name = "DCDC_REG1",
.supply_name = "vcc1",
+ .of_match = of_match_ptr("DCDC_REG1"),
+ .regulators_node = of_match_ptr("regulators"),
.id = RK808_ID_DCDC1,
.ops = &rk808_buck1_2_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 712500,
+ .uV_step = 12500,
.n_voltages = 64,
- .linear_ranges = rk808_buck_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_buck_voltage_ranges),
.vsel_reg = RK808_BUCK1_ON_VSEL_REG,
.vsel_mask = RK808_BUCK_VSEL_MASK,
.enable_reg = RK808_DCDC_EN_REG,
@@ -330,12 +380,14 @@ static const struct regulator_desc rk808_reg[] = {
}, {
.name = "DCDC_REG2",
.supply_name = "vcc2",
+ .of_match = of_match_ptr("DCDC_REG2"),
+ .regulators_node = of_match_ptr("regulators"),
.id = RK808_ID_DCDC2,
.ops = &rk808_buck1_2_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 712500,
+ .uV_step = 12500,
.n_voltages = 64,
- .linear_ranges = rk808_buck_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_buck_voltage_ranges),
.vsel_reg = RK808_BUCK2_ON_VSEL_REG,
.vsel_mask = RK808_BUCK_VSEL_MASK,
.enable_reg = RK808_DCDC_EN_REG,
@@ -344,6 +396,8 @@ static const struct regulator_desc rk808_reg[] = {
}, {
.name = "DCDC_REG3",
.supply_name = "vcc3",
+ .of_match = of_match_ptr("DCDC_REG3"),
+ .regulators_node = of_match_ptr("regulators"),
.id = RK808_ID_DCDC3,
.ops = &rk808_switch_ops,
.type = REGULATOR_VOLTAGE,
@@ -351,55 +405,23 @@ static const struct regulator_desc rk808_reg[] = {
.enable_reg = RK808_DCDC_EN_REG,
.enable_mask = BIT(2),
.owner = THIS_MODULE,
- }, {
- .name = "DCDC_REG4",
- .supply_name = "vcc4",
- .id = RK808_ID_DCDC4,
- .ops = &rk808_reg_ops,
- .type = REGULATOR_VOLTAGE,
- .n_voltages = 16,
- .linear_ranges = rk808_buck4_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_buck4_voltage_ranges),
- .vsel_reg = RK808_BUCK4_ON_VSEL_REG,
- .vsel_mask = RK808_BUCK4_VSEL_MASK,
- .enable_reg = RK808_DCDC_EN_REG,
- .enable_mask = BIT(3),
- .owner = THIS_MODULE,
- }, {
- .name = "LDO_REG1",
- .supply_name = "vcc6",
- .id = RK808_ID_LDO1,
- .ops = &rk808_reg_ops,
- .type = REGULATOR_VOLTAGE,
- .n_voltages = 17,
- .linear_ranges = rk808_ldo_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges),
- .vsel_reg = RK808_LDO1_ON_VSEL_REG,
- .vsel_mask = RK808_LDO_VSEL_MASK,
- .enable_reg = RK808_LDO_EN_REG,
- .enable_mask = BIT(0),
- .enable_time = 400,
- .owner = THIS_MODULE,
- }, {
- .name = "LDO_REG2",
- .supply_name = "vcc6",
- .id = RK808_ID_LDO2,
- .ops = &rk808_reg_ops,
- .type = REGULATOR_VOLTAGE,
- .n_voltages = 17,
- .linear_ranges = rk808_ldo_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges),
- .vsel_reg = RK808_LDO2_ON_VSEL_REG,
- .vsel_mask = RK808_LDO_VSEL_MASK,
- .enable_reg = RK808_LDO_EN_REG,
- .enable_mask = BIT(1),
- .enable_time = 400,
- .owner = THIS_MODULE,
- }, {
+ },
+ RK8XX_DESC(RK808_ID_DCDC4, "DCDC_REG4", "vcc4", 1800, 3300, 100,
+ RK808_BUCK4_ON_VSEL_REG, RK808_BUCK4_VSEL_MASK,
+ RK808_DCDC_EN_REG, BIT(3), 0),
+ RK8XX_DESC(RK808_ID_LDO1, "LDO_REG1", "vcc6", 1800, 3400, 100,
+ RK808_LDO1_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+ BIT(0), 400),
+ RK8XX_DESC(RK808_ID_LDO2, "LDO_REG2", "vcc6", 1800, 3400, 100,
+ RK808_LDO2_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+ BIT(1), 400),
+ {
.name = "LDO_REG3",
.supply_name = "vcc7",
+ .of_match = of_match_ptr("LDO_REG3"),
+ .regulators_node = of_match_ptr("regulators"),
.id = RK808_ID_LDO3,
- .ops = &rk808_reg_ops,
+ .ops = &rk808_reg_ops_ranges,
.type = REGULATOR_VOLTAGE,
.n_voltages = 16,
.linear_ranges = rk808_ldo3_voltage_ranges,
@@ -410,117 +432,26 @@ static const struct regulator_desc rk808_reg[] = {
.enable_mask = BIT(2),
.enable_time = 400,
.owner = THIS_MODULE,
- }, {
- .name = "LDO_REG4",
- .supply_name = "vcc9",
- .id = RK808_ID_LDO4,
- .ops = &rk808_reg_ops,
- .type = REGULATOR_VOLTAGE,
- .n_voltages = 17,
- .linear_ranges = rk808_ldo_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges),
- .vsel_reg = RK808_LDO4_ON_VSEL_REG,
- .vsel_mask = RK808_LDO_VSEL_MASK,
- .enable_reg = RK808_LDO_EN_REG,
- .enable_mask = BIT(3),
- .enable_time = 400,
- .owner = THIS_MODULE,
- }, {
- .name = "LDO_REG5",
- .supply_name = "vcc9",
- .id = RK808_ID_LDO5,
- .ops = &rk808_reg_ops,
- .type = REGULATOR_VOLTAGE,
- .n_voltages = 17,
- .linear_ranges = rk808_ldo_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges),
- .vsel_reg = RK808_LDO5_ON_VSEL_REG,
- .vsel_mask = RK808_LDO_VSEL_MASK,
- .enable_reg = RK808_LDO_EN_REG,
- .enable_mask = BIT(4),
- .enable_time = 400,
- .owner = THIS_MODULE,
- }, {
- .name = "LDO_REG6",
- .supply_name = "vcc10",
- .id = RK808_ID_LDO6,
- .ops = &rk808_reg_ops,
- .type = REGULATOR_VOLTAGE,
- .n_voltages = 18,
- .linear_ranges = rk808_ldo6_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo6_voltage_ranges),
- .vsel_reg = RK808_LDO6_ON_VSEL_REG,
- .vsel_mask = RK808_LDO_VSEL_MASK,
- .enable_reg = RK808_LDO_EN_REG,
- .enable_mask = BIT(5),
- .enable_time = 400,
- .owner = THIS_MODULE,
- }, {
- .name = "LDO_REG7",
- .supply_name = "vcc7",
- .id = RK808_ID_LDO7,
- .ops = &rk808_reg_ops,
- .type = REGULATOR_VOLTAGE,
- .n_voltages = 18,
- .linear_ranges = rk808_ldo6_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo6_voltage_ranges),
- .vsel_reg = RK808_LDO7_ON_VSEL_REG,
- .vsel_mask = RK808_LDO_VSEL_MASK,
- .enable_reg = RK808_LDO_EN_REG,
- .enable_mask = BIT(6),
- .enable_time = 400,
- .owner = THIS_MODULE,
- }, {
- .name = "LDO_REG8",
- .supply_name = "vcc11",
- .id = RK808_ID_LDO8,
- .ops = &rk808_reg_ops,
- .type = REGULATOR_VOLTAGE,
- .n_voltages = 17,
- .linear_ranges = rk808_ldo_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges),
- .vsel_reg = RK808_LDO8_ON_VSEL_REG,
- .vsel_mask = RK808_LDO_VSEL_MASK,
- .enable_reg = RK808_LDO_EN_REG,
- .enable_mask = BIT(7),
- .enable_time = 400,
- .owner = THIS_MODULE,
- }, {
- .name = "SWITCH_REG1",
- .supply_name = "vcc8",
- .id = RK808_ID_SWITCH1,
- .ops = &rk808_switch_ops,
- .type = REGULATOR_VOLTAGE,
- .enable_reg = RK808_DCDC_EN_REG,
- .enable_mask = BIT(5),
- .owner = THIS_MODULE,
- }, {
- .name = "SWITCH_REG2",
- .supply_name = "vcc12",
- .id = RK808_ID_SWITCH2,
- .ops = &rk808_switch_ops,
- .type = REGULATOR_VOLTAGE,
- .enable_reg = RK808_DCDC_EN_REG,
- .enable_mask = BIT(6),
- .owner = THIS_MODULE,
},
-};
-
-static struct of_regulator_match rk808_reg_matches[] = {
- [RK808_ID_DCDC1] = { .name = "DCDC_REG1" },
- [RK808_ID_DCDC2] = { .name = "DCDC_REG2" },
- [RK808_ID_DCDC3] = { .name = "DCDC_REG3" },
- [RK808_ID_DCDC4] = { .name = "DCDC_REG4" },
- [RK808_ID_LDO1] = { .name = "LDO_REG1" },
- [RK808_ID_LDO2] = { .name = "LDO_REG2" },
- [RK808_ID_LDO3] = { .name = "LDO_REG3" },
- [RK808_ID_LDO4] = { .name = "LDO_REG4" },
- [RK808_ID_LDO5] = { .name = "LDO_REG5" },
- [RK808_ID_LDO6] = { .name = "LDO_REG6" },
- [RK808_ID_LDO7] = { .name = "LDO_REG7" },
- [RK808_ID_LDO8] = { .name = "LDO_REG8" },
- [RK808_ID_SWITCH1] = { .name = "SWITCH_REG1" },
- [RK808_ID_SWITCH2] = { .name = "SWITCH_REG2" },
+ RK8XX_DESC(RK808_ID_LDO4, "LDO_REG4", "vcc9", 1800, 3400, 100,
+ RK808_LDO4_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+ BIT(3), 400),
+ RK8XX_DESC(RK808_ID_LDO5, "LDO_REG5", "vcc9", 1800, 3400, 100,
+ RK808_LDO5_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+ BIT(4), 400),
+ RK8XX_DESC(RK808_ID_LDO6, "LDO_REG6", "vcc10", 800, 2500, 100,
+ RK808_LDO6_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+ BIT(5), 400),
+ RK8XX_DESC(RK808_ID_LDO7, "LDO_REG7", "vcc7", 800, 2500, 100,
+ RK808_LDO7_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+ BIT(6), 400),
+ RK8XX_DESC(RK808_ID_LDO8, "LDO_REG8", "vcc11", 1800, 3400, 100,
+ RK808_LDO8_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+ BIT(7), 400),
+ RK8XX_DESC_SWITCH(RK808_ID_SWITCH1, "SWITCH_REG1", "vcc8",
+ RK808_DCDC_EN_REG, BIT(5)),
+ RK8XX_DESC_SWITCH(RK808_ID_SWITCH2, "SWITCH_REG2", "vcc12",
+ RK808_DCDC_EN_REG, BIT(6)),
};
static int rk808_regulator_dt_parse_pdata(struct device *dev,
@@ -529,17 +460,12 @@ static int rk808_regulator_dt_parse_pdata(struct device *dev,
struct rk808_regulator_data *pdata)
{
struct device_node *np;
- int tmp, ret, i;
+ int tmp, ret = 0, i;
np = of_get_child_by_name(client_dev->of_node, "regulators");
if (!np)
return -ENXIO;
- ret = of_regulator_match(dev, np, rk808_reg_matches,
- RK808_NUM_REGULATORS);
- if (ret < 0)
- goto dt_parse_end;
-
for (i = 0; i < ARRAY_SIZE(pdata->dvs_gpio); i++) {
pdata->dvs_gpio[i] =
devm_gpiod_get_index_optional(client_dev, "dvs", i,
@@ -586,18 +512,12 @@ static int rk808_regulator_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, pdata);
+ config.dev = &client->dev;
+ config.driver_data = pdata;
+ config.regmap = rk8xx->regmap;
+
/* Instantiate the regulators */
for (i = 0; i < RK808_NUM_REGULATORS; i++) {
- if (!rk808_reg_matches[i].init_data ||
- !rk808_reg_matches[i].of_node)
- continue;
-
- config.dev = &client->dev;
- config.driver_data = pdata;
- config.regmap = rk8xx->regmap;
- config.of_node = rk808_reg_matches[i].of_node;
- config.init_data = rk808_reg_matches[i].init_data;
-
rk808_rdev = devm_regulator_register(&pdev->dev,
&rk808_reg[i], &config);
if (IS_ERR(rk808_rdev)) {
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: Wadim Egorov <w.egorov@phytec.de>
To: linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
rtc-linux@googlegroups.com, devicetree@vger.kernel.org,
linux-rockchip@lists.infradead.org
Cc: robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com,
ijc+devicetree@hellion.org.uk, galak@codeaurora.org,
mturquette@baylibre.com, sboyd@codeaurora.org,
lee.jones@linaro.org, lgirdwood@gmail.com, broonie@kernel.org,
a.zummo@towertech.it, alexandre.belloni@free-electrons.com,
dianders@chromium.org, zyw@rock-chips.com
Subject: [rtc-linux] [PATCH v2 3/7] regulator: rk808: Migrate to regulator core's simplified DT parsing code
Date: Thu, 21 Apr 2016 15:12:37 +0200 [thread overview]
Message-ID: <1461244361-45686-4-git-send-email-w.egorov@phytec.de> (raw)
In-Reply-To: <1461244361-45686-1-git-send-email-w.egorov@phytec.de>
A common simplified DT parsing code for regulators was introduced in
commit a0c7b164ad11 ("regulator: of: Provide simplified DT parsing
method")
While at it also added RK8XX_DESC and RK8XX_DESC_SWITCH macros for the
regulator_desc struct initialization. This just makes the driver more compact.
Remove also linear ranges definitions with only one range.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
---
drivers/regulator/rk808-regulator.c | 308 +++++++++++++-----------------------
1 file changed, 114 insertions(+), 194 deletions(-)
diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c
index 37aaba9..2c529fa 100644
--- a/drivers/regulator/rk808-regulator.c
+++ b/drivers/regulator/rk808-regulator.c
@@ -55,6 +55,42 @@
/* max steps for increase voltage of Buck1/2, equal 100mv*/
#define MAX_STEPS_ONE_TIME 8
+#define RK8XX_DESC(_id, _match, _supply, _min, _max, _step, _vreg, \
+ _vmask, _ereg, _emask, _etime) \
+ [_id] = { \
+ .name = (_match), \
+ .supply_name = (_supply), \
+ .of_match = of_match_ptr(_match), \
+ .regulators_node = of_match_ptr("regulators"), \
+ .type = REGULATOR_VOLTAGE, \
+ .id = (_id), \
+ .n_voltages = (((_max) - (_min)) / (_step) + 1), \
+ .owner = THIS_MODULE, \
+ .min_uV = (_min) * 1000, \
+ .uV_step = (_step) * 1000, \
+ .vsel_reg = (_vreg), \
+ .vsel_mask = (_vmask), \
+ .enable_reg = (_ereg), \
+ .enable_mask = (_emask), \
+ .enable_time = (_etime), \
+ .ops = &rk808_reg_ops, \
+ }
+
+#define RK8XX_DESC_SWITCH(_id, _match, _supply, _ereg, _emask) \
+ [_id] = { \
+ .name = (_match), \
+ .supply_name = (_supply), \
+ .of_match = of_match_ptr(_match), \
+ .regulators_node = of_match_ptr("regulators"), \
+ .type = REGULATOR_VOLTAGE, \
+ .id = (_id), \
+ .enable_reg = (_ereg), \
+ .enable_mask = (_emask), \
+ .owner = THIS_MODULE, \
+ .ops = &rk808_switch_ops \
+ }
+
+
struct rk808_regulator_data {
struct gpio_desc *dvs_gpio[2];
};
@@ -66,27 +102,11 @@ static const int rk808_buck_config_regs[] = {
RK808_BUCK4_CONFIG_REG,
};
-static const struct regulator_linear_range rk808_buck_voltage_ranges[] = {
- REGULATOR_LINEAR_RANGE(712500, 0, 63, 12500),
-};
-
-static const struct regulator_linear_range rk808_buck4_voltage_ranges[] = {
- REGULATOR_LINEAR_RANGE(1800000, 0, 15, 100000),
-};
-
-static const struct regulator_linear_range rk808_ldo_voltage_ranges[] = {
- REGULATOR_LINEAR_RANGE(1800000, 0, 16, 100000),
-};
-
static const struct regulator_linear_range rk808_ldo3_voltage_ranges[] = {
REGULATOR_LINEAR_RANGE(800000, 0, 13, 100000),
REGULATOR_LINEAR_RANGE(2500000, 15, 15, 0),
};
-static const struct regulator_linear_range rk808_ldo6_voltage_ranges[] = {
- REGULATOR_LINEAR_RANGE(800000, 0, 17, 100000),
-};
-
static int rk808_buck1_2_get_voltage_sel_regmap(struct regulator_dev *rdev)
{
struct rk808_regulator_data *pdata = rdev_get_drvdata(rdev);
@@ -239,7 +259,7 @@ static int rk808_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
RK808_RAMP_RATE_MASK, ramp_value);
}
-static int rk808_set_suspend_voltage(struct regulator_dev *rdev, int uv)
+static int rk808_set_suspend_voltage_range(struct regulator_dev *rdev, int uv)
{
unsigned int reg;
int sel = regulator_map_voltage_linear_range(rdev, uv, uv);
@@ -254,6 +274,21 @@ static int rk808_set_suspend_voltage(struct regulator_dev *rdev, int uv)
sel);
}
+static int rk808_set_suspend_voltage(struct regulator_dev *rdev, int uv)
+{
+ unsigned int reg;
+ int sel = regulator_map_voltage_linear(rdev, uv, uv);
+
+ if (sel < 0)
+ return -EINVAL;
+
+ reg = rdev->desc->vsel_reg + RK808_SLP_REG_OFFSET;
+
+ return regmap_update_bits(rdev->regmap, reg,
+ rdev->desc->vsel_mask,
+ sel);
+}
+
static int rk808_set_suspend_enable(struct regulator_dev *rdev)
{
unsigned int reg;
@@ -291,7 +326,7 @@ static struct regulator_ops rk808_buck1_2_ops = {
.set_suspend_disable = rk808_set_suspend_disable,
};
-static struct regulator_ops rk808_reg_ops = {
+static struct regulator_ops rk808_reg_ops_ranges = {
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
@@ -299,6 +334,19 @@ static struct regulator_ops rk808_reg_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
+ .set_suspend_voltage = rk808_set_suspend_voltage_range,
+ .set_suspend_enable = rk808_set_suspend_enable,
+ .set_suspend_disable = rk808_set_suspend_disable,
+};
+
+static struct regulator_ops rk808_reg_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
.set_suspend_voltage = rk808_set_suspend_voltage,
.set_suspend_enable = rk808_set_suspend_enable,
.set_suspend_disable = rk808_set_suspend_disable,
@@ -316,12 +364,14 @@ static const struct regulator_desc rk808_reg[] = {
{
.name = "DCDC_REG1",
.supply_name = "vcc1",
+ .of_match = of_match_ptr("DCDC_REG1"),
+ .regulators_node = of_match_ptr("regulators"),
.id = RK808_ID_DCDC1,
.ops = &rk808_buck1_2_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 712500,
+ .uV_step = 12500,
.n_voltages = 64,
- .linear_ranges = rk808_buck_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_buck_voltage_ranges),
.vsel_reg = RK808_BUCK1_ON_VSEL_REG,
.vsel_mask = RK808_BUCK_VSEL_MASK,
.enable_reg = RK808_DCDC_EN_REG,
@@ -330,12 +380,14 @@ static const struct regulator_desc rk808_reg[] = {
}, {
.name = "DCDC_REG2",
.supply_name = "vcc2",
+ .of_match = of_match_ptr("DCDC_REG2"),
+ .regulators_node = of_match_ptr("regulators"),
.id = RK808_ID_DCDC2,
.ops = &rk808_buck1_2_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 712500,
+ .uV_step = 12500,
.n_voltages = 64,
- .linear_ranges = rk808_buck_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_buck_voltage_ranges),
.vsel_reg = RK808_BUCK2_ON_VSEL_REG,
.vsel_mask = RK808_BUCK_VSEL_MASK,
.enable_reg = RK808_DCDC_EN_REG,
@@ -344,6 +396,8 @@ static const struct regulator_desc rk808_reg[] = {
}, {
.name = "DCDC_REG3",
.supply_name = "vcc3",
+ .of_match = of_match_ptr("DCDC_REG3"),
+ .regulators_node = of_match_ptr("regulators"),
.id = RK808_ID_DCDC3,
.ops = &rk808_switch_ops,
.type = REGULATOR_VOLTAGE,
@@ -351,55 +405,23 @@ static const struct regulator_desc rk808_reg[] = {
.enable_reg = RK808_DCDC_EN_REG,
.enable_mask = BIT(2),
.owner = THIS_MODULE,
- }, {
- .name = "DCDC_REG4",
- .supply_name = "vcc4",
- .id = RK808_ID_DCDC4,
- .ops = &rk808_reg_ops,
- .type = REGULATOR_VOLTAGE,
- .n_voltages = 16,
- .linear_ranges = rk808_buck4_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_buck4_voltage_ranges),
- .vsel_reg = RK808_BUCK4_ON_VSEL_REG,
- .vsel_mask = RK808_BUCK4_VSEL_MASK,
- .enable_reg = RK808_DCDC_EN_REG,
- .enable_mask = BIT(3),
- .owner = THIS_MODULE,
- }, {
- .name = "LDO_REG1",
- .supply_name = "vcc6",
- .id = RK808_ID_LDO1,
- .ops = &rk808_reg_ops,
- .type = REGULATOR_VOLTAGE,
- .n_voltages = 17,
- .linear_ranges = rk808_ldo_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges),
- .vsel_reg = RK808_LDO1_ON_VSEL_REG,
- .vsel_mask = RK808_LDO_VSEL_MASK,
- .enable_reg = RK808_LDO_EN_REG,
- .enable_mask = BIT(0),
- .enable_time = 400,
- .owner = THIS_MODULE,
- }, {
- .name = "LDO_REG2",
- .supply_name = "vcc6",
- .id = RK808_ID_LDO2,
- .ops = &rk808_reg_ops,
- .type = REGULATOR_VOLTAGE,
- .n_voltages = 17,
- .linear_ranges = rk808_ldo_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges),
- .vsel_reg = RK808_LDO2_ON_VSEL_REG,
- .vsel_mask = RK808_LDO_VSEL_MASK,
- .enable_reg = RK808_LDO_EN_REG,
- .enable_mask = BIT(1),
- .enable_time = 400,
- .owner = THIS_MODULE,
- }, {
+ },
+ RK8XX_DESC(RK808_ID_DCDC4, "DCDC_REG4", "vcc4", 1800, 3300, 100,
+ RK808_BUCK4_ON_VSEL_REG, RK808_BUCK4_VSEL_MASK,
+ RK808_DCDC_EN_REG, BIT(3), 0),
+ RK8XX_DESC(RK808_ID_LDO1, "LDO_REG1", "vcc6", 1800, 3400, 100,
+ RK808_LDO1_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+ BIT(0), 400),
+ RK8XX_DESC(RK808_ID_LDO2, "LDO_REG2", "vcc6", 1800, 3400, 100,
+ RK808_LDO2_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+ BIT(1), 400),
+ {
.name = "LDO_REG3",
.supply_name = "vcc7",
+ .of_match = of_match_ptr("LDO_REG3"),
+ .regulators_node = of_match_ptr("regulators"),
.id = RK808_ID_LDO3,
- .ops = &rk808_reg_ops,
+ .ops = &rk808_reg_ops_ranges,
.type = REGULATOR_VOLTAGE,
.n_voltages = 16,
.linear_ranges = rk808_ldo3_voltage_ranges,
@@ -410,117 +432,26 @@ static const struct regulator_desc rk808_reg[] = {
.enable_mask = BIT(2),
.enable_time = 400,
.owner = THIS_MODULE,
- }, {
- .name = "LDO_REG4",
- .supply_name = "vcc9",
- .id = RK808_ID_LDO4,
- .ops = &rk808_reg_ops,
- .type = REGULATOR_VOLTAGE,
- .n_voltages = 17,
- .linear_ranges = rk808_ldo_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges),
- .vsel_reg = RK808_LDO4_ON_VSEL_REG,
- .vsel_mask = RK808_LDO_VSEL_MASK,
- .enable_reg = RK808_LDO_EN_REG,
- .enable_mask = BIT(3),
- .enable_time = 400,
- .owner = THIS_MODULE,
- }, {
- .name = "LDO_REG5",
- .supply_name = "vcc9",
- .id = RK808_ID_LDO5,
- .ops = &rk808_reg_ops,
- .type = REGULATOR_VOLTAGE,
- .n_voltages = 17,
- .linear_ranges = rk808_ldo_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges),
- .vsel_reg = RK808_LDO5_ON_VSEL_REG,
- .vsel_mask = RK808_LDO_VSEL_MASK,
- .enable_reg = RK808_LDO_EN_REG,
- .enable_mask = BIT(4),
- .enable_time = 400,
- .owner = THIS_MODULE,
- }, {
- .name = "LDO_REG6",
- .supply_name = "vcc10",
- .id = RK808_ID_LDO6,
- .ops = &rk808_reg_ops,
- .type = REGULATOR_VOLTAGE,
- .n_voltages = 18,
- .linear_ranges = rk808_ldo6_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo6_voltage_ranges),
- .vsel_reg = RK808_LDO6_ON_VSEL_REG,
- .vsel_mask = RK808_LDO_VSEL_MASK,
- .enable_reg = RK808_LDO_EN_REG,
- .enable_mask = BIT(5),
- .enable_time = 400,
- .owner = THIS_MODULE,
- }, {
- .name = "LDO_REG7",
- .supply_name = "vcc7",
- .id = RK808_ID_LDO7,
- .ops = &rk808_reg_ops,
- .type = REGULATOR_VOLTAGE,
- .n_voltages = 18,
- .linear_ranges = rk808_ldo6_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo6_voltage_ranges),
- .vsel_reg = RK808_LDO7_ON_VSEL_REG,
- .vsel_mask = RK808_LDO_VSEL_MASK,
- .enable_reg = RK808_LDO_EN_REG,
- .enable_mask = BIT(6),
- .enable_time = 400,
- .owner = THIS_MODULE,
- }, {
- .name = "LDO_REG8",
- .supply_name = "vcc11",
- .id = RK808_ID_LDO8,
- .ops = &rk808_reg_ops,
- .type = REGULATOR_VOLTAGE,
- .n_voltages = 17,
- .linear_ranges = rk808_ldo_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges),
- .vsel_reg = RK808_LDO8_ON_VSEL_REG,
- .vsel_mask = RK808_LDO_VSEL_MASK,
- .enable_reg = RK808_LDO_EN_REG,
- .enable_mask = BIT(7),
- .enable_time = 400,
- .owner = THIS_MODULE,
- }, {
- .name = "SWITCH_REG1",
- .supply_name = "vcc8",
- .id = RK808_ID_SWITCH1,
- .ops = &rk808_switch_ops,
- .type = REGULATOR_VOLTAGE,
- .enable_reg = RK808_DCDC_EN_REG,
- .enable_mask = BIT(5),
- .owner = THIS_MODULE,
- }, {
- .name = "SWITCH_REG2",
- .supply_name = "vcc12",
- .id = RK808_ID_SWITCH2,
- .ops = &rk808_switch_ops,
- .type = REGULATOR_VOLTAGE,
- .enable_reg = RK808_DCDC_EN_REG,
- .enable_mask = BIT(6),
- .owner = THIS_MODULE,
},
-};
-
-static struct of_regulator_match rk808_reg_matches[] = {
- [RK808_ID_DCDC1] = { .name = "DCDC_REG1" },
- [RK808_ID_DCDC2] = { .name = "DCDC_REG2" },
- [RK808_ID_DCDC3] = { .name = "DCDC_REG3" },
- [RK808_ID_DCDC4] = { .name = "DCDC_REG4" },
- [RK808_ID_LDO1] = { .name = "LDO_REG1" },
- [RK808_ID_LDO2] = { .name = "LDO_REG2" },
- [RK808_ID_LDO3] = { .name = "LDO_REG3" },
- [RK808_ID_LDO4] = { .name = "LDO_REG4" },
- [RK808_ID_LDO5] = { .name = "LDO_REG5" },
- [RK808_ID_LDO6] = { .name = "LDO_REG6" },
- [RK808_ID_LDO7] = { .name = "LDO_REG7" },
- [RK808_ID_LDO8] = { .name = "LDO_REG8" },
- [RK808_ID_SWITCH1] = { .name = "SWITCH_REG1" },
- [RK808_ID_SWITCH2] = { .name = "SWITCH_REG2" },
+ RK8XX_DESC(RK808_ID_LDO4, "LDO_REG4", "vcc9", 1800, 3400, 100,
+ RK808_LDO4_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+ BIT(3), 400),
+ RK8XX_DESC(RK808_ID_LDO5, "LDO_REG5", "vcc9", 1800, 3400, 100,
+ RK808_LDO5_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+ BIT(4), 400),
+ RK8XX_DESC(RK808_ID_LDO6, "LDO_REG6", "vcc10", 800, 2500, 100,
+ RK808_LDO6_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+ BIT(5), 400),
+ RK8XX_DESC(RK808_ID_LDO7, "LDO_REG7", "vcc7", 800, 2500, 100,
+ RK808_LDO7_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+ BIT(6), 400),
+ RK8XX_DESC(RK808_ID_LDO8, "LDO_REG8", "vcc11", 1800, 3400, 100,
+ RK808_LDO8_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+ BIT(7), 400),
+ RK8XX_DESC_SWITCH(RK808_ID_SWITCH1, "SWITCH_REG1", "vcc8",
+ RK808_DCDC_EN_REG, BIT(5)),
+ RK8XX_DESC_SWITCH(RK808_ID_SWITCH2, "SWITCH_REG2", "vcc12",
+ RK808_DCDC_EN_REG, BIT(6)),
};
static int rk808_regulator_dt_parse_pdata(struct device *dev,
@@ -529,17 +460,12 @@ static int rk808_regulator_dt_parse_pdata(struct device *dev,
struct rk808_regulator_data *pdata)
{
struct device_node *np;
- int tmp, ret, i;
+ int tmp, ret = 0, i;
np = of_get_child_by_name(client_dev->of_node, "regulators");
if (!np)
return -ENXIO;
- ret = of_regulator_match(dev, np, rk808_reg_matches,
- RK808_NUM_REGULATORS);
- if (ret < 0)
- goto dt_parse_end;
-
for (i = 0; i < ARRAY_SIZE(pdata->dvs_gpio); i++) {
pdata->dvs_gpio[i] =
devm_gpiod_get_index_optional(client_dev, "dvs", i,
@@ -586,18 +512,12 @@ static int rk808_regulator_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, pdata);
+ config.dev = &client->dev;
+ config.driver_data = pdata;
+ config.regmap = rk8xx->regmap;
+
/* Instantiate the regulators */
for (i = 0; i < RK808_NUM_REGULATORS; i++) {
- if (!rk808_reg_matches[i].init_data ||
- !rk808_reg_matches[i].of_node)
- continue;
-
- config.dev = &client->dev;
- config.driver_data = pdata;
- config.regmap = rk8xx->regmap;
- config.of_node = rk808_reg_matches[i].of_node;
- config.init_data = rk808_reg_matches[i].init_data;
-
rk808_rdev = devm_regulator_register(&pdev->dev,
&rk808_reg[i], &config);
if (IS_ERR(rk808_rdev)) {
--
1.9.1
--
--
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
---
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
WARNING: multiple messages have this Message-ID (diff)
From: Wadim Egorov <w.egorov-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org>
To: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
rtc-linux-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: mark.rutland-5wv7dgnIgG8@public.gmane.org,
a.zummo-BfzFCNDTiLLj+vYz1yj4TQ@public.gmane.org,
pawel.moll-5wv7dgnIgG8@public.gmane.org,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org,
mturquette-rdvid1DuHRBWk0Htik3J/w@public.gmane.org,
sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org,
broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
zyw-TNX95d0MmH7DzftRWevZcw@public.gmane.org,
lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org
Subject: [PATCH v2 3/7] regulator: rk808: Migrate to regulator core's simplified DT parsing code
Date: Thu, 21 Apr 2016 15:12:37 +0200 [thread overview]
Message-ID: <1461244361-45686-4-git-send-email-w.egorov@phytec.de> (raw)
In-Reply-To: <1461244361-45686-1-git-send-email-w.egorov-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org>
A common simplified DT parsing code for regulators was introduced in
commit a0c7b164ad11 ("regulator: of: Provide simplified DT parsing
method")
While at it also added RK8XX_DESC and RK8XX_DESC_SWITCH macros for the
regulator_desc struct initialization. This just makes the driver more compact.
Remove also linear ranges definitions with only one range.
Signed-off-by: Wadim Egorov <w.egorov-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org>
---
drivers/regulator/rk808-regulator.c | 308 +++++++++++++-----------------------
1 file changed, 114 insertions(+), 194 deletions(-)
diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c
index 37aaba9..2c529fa 100644
--- a/drivers/regulator/rk808-regulator.c
+++ b/drivers/regulator/rk808-regulator.c
@@ -55,6 +55,42 @@
/* max steps for increase voltage of Buck1/2, equal 100mv*/
#define MAX_STEPS_ONE_TIME 8
+#define RK8XX_DESC(_id, _match, _supply, _min, _max, _step, _vreg, \
+ _vmask, _ereg, _emask, _etime) \
+ [_id] = { \
+ .name = (_match), \
+ .supply_name = (_supply), \
+ .of_match = of_match_ptr(_match), \
+ .regulators_node = of_match_ptr("regulators"), \
+ .type = REGULATOR_VOLTAGE, \
+ .id = (_id), \
+ .n_voltages = (((_max) - (_min)) / (_step) + 1), \
+ .owner = THIS_MODULE, \
+ .min_uV = (_min) * 1000, \
+ .uV_step = (_step) * 1000, \
+ .vsel_reg = (_vreg), \
+ .vsel_mask = (_vmask), \
+ .enable_reg = (_ereg), \
+ .enable_mask = (_emask), \
+ .enable_time = (_etime), \
+ .ops = &rk808_reg_ops, \
+ }
+
+#define RK8XX_DESC_SWITCH(_id, _match, _supply, _ereg, _emask) \
+ [_id] = { \
+ .name = (_match), \
+ .supply_name = (_supply), \
+ .of_match = of_match_ptr(_match), \
+ .regulators_node = of_match_ptr("regulators"), \
+ .type = REGULATOR_VOLTAGE, \
+ .id = (_id), \
+ .enable_reg = (_ereg), \
+ .enable_mask = (_emask), \
+ .owner = THIS_MODULE, \
+ .ops = &rk808_switch_ops \
+ }
+
+
struct rk808_regulator_data {
struct gpio_desc *dvs_gpio[2];
};
@@ -66,27 +102,11 @@ static const int rk808_buck_config_regs[] = {
RK808_BUCK4_CONFIG_REG,
};
-static const struct regulator_linear_range rk808_buck_voltage_ranges[] = {
- REGULATOR_LINEAR_RANGE(712500, 0, 63, 12500),
-};
-
-static const struct regulator_linear_range rk808_buck4_voltage_ranges[] = {
- REGULATOR_LINEAR_RANGE(1800000, 0, 15, 100000),
-};
-
-static const struct regulator_linear_range rk808_ldo_voltage_ranges[] = {
- REGULATOR_LINEAR_RANGE(1800000, 0, 16, 100000),
-};
-
static const struct regulator_linear_range rk808_ldo3_voltage_ranges[] = {
REGULATOR_LINEAR_RANGE(800000, 0, 13, 100000),
REGULATOR_LINEAR_RANGE(2500000, 15, 15, 0),
};
-static const struct regulator_linear_range rk808_ldo6_voltage_ranges[] = {
- REGULATOR_LINEAR_RANGE(800000, 0, 17, 100000),
-};
-
static int rk808_buck1_2_get_voltage_sel_regmap(struct regulator_dev *rdev)
{
struct rk808_regulator_data *pdata = rdev_get_drvdata(rdev);
@@ -239,7 +259,7 @@ static int rk808_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
RK808_RAMP_RATE_MASK, ramp_value);
}
-static int rk808_set_suspend_voltage(struct regulator_dev *rdev, int uv)
+static int rk808_set_suspend_voltage_range(struct regulator_dev *rdev, int uv)
{
unsigned int reg;
int sel = regulator_map_voltage_linear_range(rdev, uv, uv);
@@ -254,6 +274,21 @@ static int rk808_set_suspend_voltage(struct regulator_dev *rdev, int uv)
sel);
}
+static int rk808_set_suspend_voltage(struct regulator_dev *rdev, int uv)
+{
+ unsigned int reg;
+ int sel = regulator_map_voltage_linear(rdev, uv, uv);
+
+ if (sel < 0)
+ return -EINVAL;
+
+ reg = rdev->desc->vsel_reg + RK808_SLP_REG_OFFSET;
+
+ return regmap_update_bits(rdev->regmap, reg,
+ rdev->desc->vsel_mask,
+ sel);
+}
+
static int rk808_set_suspend_enable(struct regulator_dev *rdev)
{
unsigned int reg;
@@ -291,7 +326,7 @@ static struct regulator_ops rk808_buck1_2_ops = {
.set_suspend_disable = rk808_set_suspend_disable,
};
-static struct regulator_ops rk808_reg_ops = {
+static struct regulator_ops rk808_reg_ops_ranges = {
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
@@ -299,6 +334,19 @@ static struct regulator_ops rk808_reg_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
+ .set_suspend_voltage = rk808_set_suspend_voltage_range,
+ .set_suspend_enable = rk808_set_suspend_enable,
+ .set_suspend_disable = rk808_set_suspend_disable,
+};
+
+static struct regulator_ops rk808_reg_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
.set_suspend_voltage = rk808_set_suspend_voltage,
.set_suspend_enable = rk808_set_suspend_enable,
.set_suspend_disable = rk808_set_suspend_disable,
@@ -316,12 +364,14 @@ static const struct regulator_desc rk808_reg[] = {
{
.name = "DCDC_REG1",
.supply_name = "vcc1",
+ .of_match = of_match_ptr("DCDC_REG1"),
+ .regulators_node = of_match_ptr("regulators"),
.id = RK808_ID_DCDC1,
.ops = &rk808_buck1_2_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 712500,
+ .uV_step = 12500,
.n_voltages = 64,
- .linear_ranges = rk808_buck_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_buck_voltage_ranges),
.vsel_reg = RK808_BUCK1_ON_VSEL_REG,
.vsel_mask = RK808_BUCK_VSEL_MASK,
.enable_reg = RK808_DCDC_EN_REG,
@@ -330,12 +380,14 @@ static const struct regulator_desc rk808_reg[] = {
}, {
.name = "DCDC_REG2",
.supply_name = "vcc2",
+ .of_match = of_match_ptr("DCDC_REG2"),
+ .regulators_node = of_match_ptr("regulators"),
.id = RK808_ID_DCDC2,
.ops = &rk808_buck1_2_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 712500,
+ .uV_step = 12500,
.n_voltages = 64,
- .linear_ranges = rk808_buck_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_buck_voltage_ranges),
.vsel_reg = RK808_BUCK2_ON_VSEL_REG,
.vsel_mask = RK808_BUCK_VSEL_MASK,
.enable_reg = RK808_DCDC_EN_REG,
@@ -344,6 +396,8 @@ static const struct regulator_desc rk808_reg[] = {
}, {
.name = "DCDC_REG3",
.supply_name = "vcc3",
+ .of_match = of_match_ptr("DCDC_REG3"),
+ .regulators_node = of_match_ptr("regulators"),
.id = RK808_ID_DCDC3,
.ops = &rk808_switch_ops,
.type = REGULATOR_VOLTAGE,
@@ -351,55 +405,23 @@ static const struct regulator_desc rk808_reg[] = {
.enable_reg = RK808_DCDC_EN_REG,
.enable_mask = BIT(2),
.owner = THIS_MODULE,
- }, {
- .name = "DCDC_REG4",
- .supply_name = "vcc4",
- .id = RK808_ID_DCDC4,
- .ops = &rk808_reg_ops,
- .type = REGULATOR_VOLTAGE,
- .n_voltages = 16,
- .linear_ranges = rk808_buck4_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_buck4_voltage_ranges),
- .vsel_reg = RK808_BUCK4_ON_VSEL_REG,
- .vsel_mask = RK808_BUCK4_VSEL_MASK,
- .enable_reg = RK808_DCDC_EN_REG,
- .enable_mask = BIT(3),
- .owner = THIS_MODULE,
- }, {
- .name = "LDO_REG1",
- .supply_name = "vcc6",
- .id = RK808_ID_LDO1,
- .ops = &rk808_reg_ops,
- .type = REGULATOR_VOLTAGE,
- .n_voltages = 17,
- .linear_ranges = rk808_ldo_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges),
- .vsel_reg = RK808_LDO1_ON_VSEL_REG,
- .vsel_mask = RK808_LDO_VSEL_MASK,
- .enable_reg = RK808_LDO_EN_REG,
- .enable_mask = BIT(0),
- .enable_time = 400,
- .owner = THIS_MODULE,
- }, {
- .name = "LDO_REG2",
- .supply_name = "vcc6",
- .id = RK808_ID_LDO2,
- .ops = &rk808_reg_ops,
- .type = REGULATOR_VOLTAGE,
- .n_voltages = 17,
- .linear_ranges = rk808_ldo_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges),
- .vsel_reg = RK808_LDO2_ON_VSEL_REG,
- .vsel_mask = RK808_LDO_VSEL_MASK,
- .enable_reg = RK808_LDO_EN_REG,
- .enable_mask = BIT(1),
- .enable_time = 400,
- .owner = THIS_MODULE,
- }, {
+ },
+ RK8XX_DESC(RK808_ID_DCDC4, "DCDC_REG4", "vcc4", 1800, 3300, 100,
+ RK808_BUCK4_ON_VSEL_REG, RK808_BUCK4_VSEL_MASK,
+ RK808_DCDC_EN_REG, BIT(3), 0),
+ RK8XX_DESC(RK808_ID_LDO1, "LDO_REG1", "vcc6", 1800, 3400, 100,
+ RK808_LDO1_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+ BIT(0), 400),
+ RK8XX_DESC(RK808_ID_LDO2, "LDO_REG2", "vcc6", 1800, 3400, 100,
+ RK808_LDO2_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+ BIT(1), 400),
+ {
.name = "LDO_REG3",
.supply_name = "vcc7",
+ .of_match = of_match_ptr("LDO_REG3"),
+ .regulators_node = of_match_ptr("regulators"),
.id = RK808_ID_LDO3,
- .ops = &rk808_reg_ops,
+ .ops = &rk808_reg_ops_ranges,
.type = REGULATOR_VOLTAGE,
.n_voltages = 16,
.linear_ranges = rk808_ldo3_voltage_ranges,
@@ -410,117 +432,26 @@ static const struct regulator_desc rk808_reg[] = {
.enable_mask = BIT(2),
.enable_time = 400,
.owner = THIS_MODULE,
- }, {
- .name = "LDO_REG4",
- .supply_name = "vcc9",
- .id = RK808_ID_LDO4,
- .ops = &rk808_reg_ops,
- .type = REGULATOR_VOLTAGE,
- .n_voltages = 17,
- .linear_ranges = rk808_ldo_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges),
- .vsel_reg = RK808_LDO4_ON_VSEL_REG,
- .vsel_mask = RK808_LDO_VSEL_MASK,
- .enable_reg = RK808_LDO_EN_REG,
- .enable_mask = BIT(3),
- .enable_time = 400,
- .owner = THIS_MODULE,
- }, {
- .name = "LDO_REG5",
- .supply_name = "vcc9",
- .id = RK808_ID_LDO5,
- .ops = &rk808_reg_ops,
- .type = REGULATOR_VOLTAGE,
- .n_voltages = 17,
- .linear_ranges = rk808_ldo_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges),
- .vsel_reg = RK808_LDO5_ON_VSEL_REG,
- .vsel_mask = RK808_LDO_VSEL_MASK,
- .enable_reg = RK808_LDO_EN_REG,
- .enable_mask = BIT(4),
- .enable_time = 400,
- .owner = THIS_MODULE,
- }, {
- .name = "LDO_REG6",
- .supply_name = "vcc10",
- .id = RK808_ID_LDO6,
- .ops = &rk808_reg_ops,
- .type = REGULATOR_VOLTAGE,
- .n_voltages = 18,
- .linear_ranges = rk808_ldo6_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo6_voltage_ranges),
- .vsel_reg = RK808_LDO6_ON_VSEL_REG,
- .vsel_mask = RK808_LDO_VSEL_MASK,
- .enable_reg = RK808_LDO_EN_REG,
- .enable_mask = BIT(5),
- .enable_time = 400,
- .owner = THIS_MODULE,
- }, {
- .name = "LDO_REG7",
- .supply_name = "vcc7",
- .id = RK808_ID_LDO7,
- .ops = &rk808_reg_ops,
- .type = REGULATOR_VOLTAGE,
- .n_voltages = 18,
- .linear_ranges = rk808_ldo6_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo6_voltage_ranges),
- .vsel_reg = RK808_LDO7_ON_VSEL_REG,
- .vsel_mask = RK808_LDO_VSEL_MASK,
- .enable_reg = RK808_LDO_EN_REG,
- .enable_mask = BIT(6),
- .enable_time = 400,
- .owner = THIS_MODULE,
- }, {
- .name = "LDO_REG8",
- .supply_name = "vcc11",
- .id = RK808_ID_LDO8,
- .ops = &rk808_reg_ops,
- .type = REGULATOR_VOLTAGE,
- .n_voltages = 17,
- .linear_ranges = rk808_ldo_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges),
- .vsel_reg = RK808_LDO8_ON_VSEL_REG,
- .vsel_mask = RK808_LDO_VSEL_MASK,
- .enable_reg = RK808_LDO_EN_REG,
- .enable_mask = BIT(7),
- .enable_time = 400,
- .owner = THIS_MODULE,
- }, {
- .name = "SWITCH_REG1",
- .supply_name = "vcc8",
- .id = RK808_ID_SWITCH1,
- .ops = &rk808_switch_ops,
- .type = REGULATOR_VOLTAGE,
- .enable_reg = RK808_DCDC_EN_REG,
- .enable_mask = BIT(5),
- .owner = THIS_MODULE,
- }, {
- .name = "SWITCH_REG2",
- .supply_name = "vcc12",
- .id = RK808_ID_SWITCH2,
- .ops = &rk808_switch_ops,
- .type = REGULATOR_VOLTAGE,
- .enable_reg = RK808_DCDC_EN_REG,
- .enable_mask = BIT(6),
- .owner = THIS_MODULE,
},
-};
-
-static struct of_regulator_match rk808_reg_matches[] = {
- [RK808_ID_DCDC1] = { .name = "DCDC_REG1" },
- [RK808_ID_DCDC2] = { .name = "DCDC_REG2" },
- [RK808_ID_DCDC3] = { .name = "DCDC_REG3" },
- [RK808_ID_DCDC4] = { .name = "DCDC_REG4" },
- [RK808_ID_LDO1] = { .name = "LDO_REG1" },
- [RK808_ID_LDO2] = { .name = "LDO_REG2" },
- [RK808_ID_LDO3] = { .name = "LDO_REG3" },
- [RK808_ID_LDO4] = { .name = "LDO_REG4" },
- [RK808_ID_LDO5] = { .name = "LDO_REG5" },
- [RK808_ID_LDO6] = { .name = "LDO_REG6" },
- [RK808_ID_LDO7] = { .name = "LDO_REG7" },
- [RK808_ID_LDO8] = { .name = "LDO_REG8" },
- [RK808_ID_SWITCH1] = { .name = "SWITCH_REG1" },
- [RK808_ID_SWITCH2] = { .name = "SWITCH_REG2" },
+ RK8XX_DESC(RK808_ID_LDO4, "LDO_REG4", "vcc9", 1800, 3400, 100,
+ RK808_LDO4_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+ BIT(3), 400),
+ RK8XX_DESC(RK808_ID_LDO5, "LDO_REG5", "vcc9", 1800, 3400, 100,
+ RK808_LDO5_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+ BIT(4), 400),
+ RK8XX_DESC(RK808_ID_LDO6, "LDO_REG6", "vcc10", 800, 2500, 100,
+ RK808_LDO6_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+ BIT(5), 400),
+ RK8XX_DESC(RK808_ID_LDO7, "LDO_REG7", "vcc7", 800, 2500, 100,
+ RK808_LDO7_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+ BIT(6), 400),
+ RK8XX_DESC(RK808_ID_LDO8, "LDO_REG8", "vcc11", 1800, 3400, 100,
+ RK808_LDO8_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+ BIT(7), 400),
+ RK8XX_DESC_SWITCH(RK808_ID_SWITCH1, "SWITCH_REG1", "vcc8",
+ RK808_DCDC_EN_REG, BIT(5)),
+ RK8XX_DESC_SWITCH(RK808_ID_SWITCH2, "SWITCH_REG2", "vcc12",
+ RK808_DCDC_EN_REG, BIT(6)),
};
static int rk808_regulator_dt_parse_pdata(struct device *dev,
@@ -529,17 +460,12 @@ static int rk808_regulator_dt_parse_pdata(struct device *dev,
struct rk808_regulator_data *pdata)
{
struct device_node *np;
- int tmp, ret, i;
+ int tmp, ret = 0, i;
np = of_get_child_by_name(client_dev->of_node, "regulators");
if (!np)
return -ENXIO;
- ret = of_regulator_match(dev, np, rk808_reg_matches,
- RK808_NUM_REGULATORS);
- if (ret < 0)
- goto dt_parse_end;
-
for (i = 0; i < ARRAY_SIZE(pdata->dvs_gpio); i++) {
pdata->dvs_gpio[i] =
devm_gpiod_get_index_optional(client_dev, "dvs", i,
@@ -586,18 +512,12 @@ static int rk808_regulator_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, pdata);
+ config.dev = &client->dev;
+ config.driver_data = pdata;
+ config.regmap = rk8xx->regmap;
+
/* Instantiate the regulators */
for (i = 0; i < RK808_NUM_REGULATORS; i++) {
- if (!rk808_reg_matches[i].init_data ||
- !rk808_reg_matches[i].of_node)
- continue;
-
- config.dev = &client->dev;
- config.driver_data = pdata;
- config.regmap = rk8xx->regmap;
- config.of_node = rk808_reg_matches[i].of_node;
- config.init_data = rk808_reg_matches[i].init_data;
-
rk808_rdev = devm_regulator_register(&pdev->dev,
&rk808_reg[i], &config);
if (IS_ERR(rk808_rdev)) {
--
1.9.1
next prev parent reply other threads:[~2016-04-21 13:18 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-21 13:12 [PATCH v2 0/5] Add support for rk818 Wadim Egorov
2016-04-21 13:12 ` Wadim Egorov
2016-04-21 13:12 ` [rtc-linux] " Wadim Egorov
2016-04-21 13:12 ` [PATCH v2 1/7] drivers: mfd: rk808: rename rk808 struct to rk8xx Wadim Egorov
2016-04-21 13:12 ` [rtc-linux] " Wadim Egorov
2016-04-21 14:20 ` Alexandre Belloni
2016-04-21 14:20 ` [rtc-linux] " Alexandre Belloni
2016-04-21 13:12 ` [PATCH v2 2/7] mfd: RK808: Add RK818 support Wadim Egorov
2016-04-21 13:12 ` [rtc-linux] " Wadim Egorov
2016-04-21 13:12 ` Wadim Egorov [this message]
2016-04-21 13:12 ` [PATCH v2 3/7] regulator: rk808: Migrate to regulator core's simplified DT parsing code Wadim Egorov
2016-04-21 13:12 ` [rtc-linux] " Wadim Egorov
2016-04-21 16:01 ` Mark Brown
2016-04-21 16:01 ` Mark Brown
2016-04-21 16:01 ` [rtc-linux] " Mark Brown
2016-04-22 9:03 ` Wadim Egorov
2016-04-22 9:03 ` [rtc-linux] " Wadim Egorov
2016-04-22 9:41 ` Mark Brown
2016-04-22 9:41 ` Mark Brown
2016-04-22 9:41 ` [rtc-linux] " Mark Brown
2016-04-21 13:12 ` [PATCH v2 4/7] regulator: rk808: Add regulator driver for RK818 Wadim Egorov
2016-04-21 13:12 ` Wadim Egorov
2016-04-21 13:12 ` [rtc-linux] " Wadim Egorov
2016-04-21 16:02 ` Mark Brown
2016-04-21 16:02 ` [rtc-linux] " Mark Brown
2016-04-21 13:12 ` [PATCH v2 5/7] mfd: dt-bindings: Add RK818 device tree bindings document Wadim Egorov
2016-04-21 13:12 ` [rtc-linux] " Wadim Egorov
2016-04-22 20:25 ` Rob Herring
2016-04-22 20:25 ` [rtc-linux] " Rob Herring
2016-04-21 13:12 ` [PATCH v2 6/7] clk: Kconfig: Name RK818 in Kconfig for COMMON_CLK_RK808 Wadim Egorov
2016-04-21 13:12 ` [rtc-linux] " Wadim Egorov
2016-04-22 21:37 ` Stephen Boyd
2016-04-22 21:37 ` Stephen Boyd
2016-04-22 21:37 ` [rtc-linux] " Stephen Boyd
2016-04-21 13:12 ` [PATCH v2 7/7] rtc: Kconfig: Name RK818 in Kconfig for RTC_DRV_RK808 Wadim Egorov
2016-04-21 13:12 ` Wadim Egorov
2016-04-21 13:12 ` [rtc-linux] " Wadim Egorov
2016-04-21 14:35 ` Alexandre Belloni
2016-04-21 14:35 ` Alexandre Belloni
2016-04-21 14:35 ` [rtc-linux] " Alexandre Belloni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1461244361-45686-4-git-send-email-w.egorov@phytec.de \
--to=w.egorov@phytec.de \
--cc=a.zummo@towertech.it \
--cc=alexandre.belloni@free-electrons.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=mturquette@baylibre.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=rtc-linux@googlegroups.com \
--cc=sboyd@codeaurora.org \
--cc=zyw@rock-chips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.