From: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> To: <ath10k@lists.infradead.org> Cc: <linux-wireless@vger.kernel.org>, <rmanohar@codeaurora.org>, "Rajkumar Manoharan" <rmanohar@qti.qualcomm.com> Subject: [PATCH v2 3/4] ath10k: handle pdev_chan_info wmi event Date: Wed, 27 Apr 2016 16:23:21 +0530 [thread overview] Message-ID: <1461754402-7679-3-git-send-email-rmanohar@qti.qualcomm.com> (raw) In-Reply-To: <1461754402-7679-1-git-send-email-rmanohar@qti.qualcomm.com> Add handler to process bss channel information wmi event that will be received upon sending pdev_chan_info_request wmi command. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> --- drivers/net/wireless/ath/ath10k/wmi.c | 32 ++++++++++++++++++++++++++++++++ drivers/net/wireless/ath/ath10k/wmi.h | 11 +++++++++++ 2 files changed, 43 insertions(+) diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c index 89013d0a57f9..d23c83492fe9 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.c +++ b/drivers/net/wireless/ath/ath10k/wmi.c @@ -4793,6 +4793,32 @@ static int ath10k_wmi_event_temperature(struct ath10k *ar, struct sk_buff *skb) return 0; } +static int ath10k_wmi_event_pdev_bss_chan_info(struct ath10k *ar, + struct sk_buff *skb) +{ + struct wmi_pdev_bss_chan_info_event *ev; + u64 busy, total, tx, rx, rx_bss; + u32 freq, noise_floor; + + ev = (struct wmi_pdev_bss_chan_info_event *)skb->data; + if (WARN_ON(skb->len < sizeof(*ev))) + return -EPROTO; + + freq = __le32_to_cpu(ev->freq); + noise_floor = __le32_to_cpu(ev->noise_floor); + busy = __le64_to_cpu(ev->cycle_busy); + total = __le64_to_cpu(ev->cycle_total); + tx = __le64_to_cpu(ev->cycle_tx); + rx = __le64_to_cpu(ev->cycle_rx); + rx_bss = __le64_to_cpu(ev->cycle_rx_bss); + + ath10k_dbg(ar, ATH10K_DBG_WMI, + "wmi event pdev bss chan info:\n freq: %d noise: %d cycle: busy %llu total %llu tx %llu rx %llu rx_bss %llu\n", + freq, noise_floor, busy, total, tx, rx, rx_bss); + + return 0; +} + static void ath10k_wmi_op_rx(struct ath10k *ar, struct sk_buff *skb) { struct wmi_cmd_hdr *cmd_hdr; @@ -5136,6 +5162,9 @@ static void ath10k_wmi_10_2_op_rx(struct ath10k *ar, struct sk_buff *skb) case WMI_10_2_PDEV_TEMPERATURE_EVENTID: ath10k_wmi_event_temperature(ar, skb); break; + case WMI_10_2_PDEV_BSS_CHAN_INFO_EVENTID: + ath10k_wmi_event_pdev_bss_chan_info(ar, skb); + break; case WMI_10_2_RTT_KEEPALIVE_EVENTID: case WMI_10_2_GPIO_INPUT_EVENTID: case WMI_10_2_PEER_RATECODE_LIST_EVENTID: @@ -5222,6 +5251,9 @@ static void ath10k_wmi_10_4_op_rx(struct ath10k *ar, struct sk_buff *skb) case WMI_10_4_PDEV_TEMPERATURE_EVENTID: ath10k_wmi_event_temperature(ar, skb); break; + case WMI_10_4_PDEV_BSS_CHAN_INFO_EVENTID: + ath10k_wmi_event_pdev_bss_chan_info(ar, skb); + break; default: ath10k_warn(ar, "Unknown eventid: %d\n", id); break; diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h index 4cdf216ae999..e1043b81a6e6 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.h +++ b/drivers/net/wireless/ath/ath10k/wmi.h @@ -6284,6 +6284,17 @@ struct wmi_pdev_temperature_event { __le32 temperature; } __packed; +struct wmi_pdev_bss_chan_info_event { + __le32 freq; + __le32 noise_floor; + __le64 cycle_busy; + __le64 cycle_total; + __le64 cycle_tx; + __le64 cycle_rx; + __le64 cycle_rx_bss; + __le32 reserved; +} __packed; + /* WOW structures */ enum wmi_wow_wakeup_event { WOW_BMISS_EVENT = 0, -- 2.8.0
WARNING: multiple messages have this Message-ID (diff)
From: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> To: ath10k@lists.infradead.org Cc: linux-wireless@vger.kernel.org, Rajkumar Manoharan <rmanohar@qti.qualcomm.com>, rmanohar@codeaurora.org Subject: [PATCH v2 3/4] ath10k: handle pdev_chan_info wmi event Date: Wed, 27 Apr 2016 16:23:21 +0530 [thread overview] Message-ID: <1461754402-7679-3-git-send-email-rmanohar@qti.qualcomm.com> (raw) In-Reply-To: <1461754402-7679-1-git-send-email-rmanohar@qti.qualcomm.com> Add handler to process bss channel information wmi event that will be received upon sending pdev_chan_info_request wmi command. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> --- drivers/net/wireless/ath/ath10k/wmi.c | 32 ++++++++++++++++++++++++++++++++ drivers/net/wireless/ath/ath10k/wmi.h | 11 +++++++++++ 2 files changed, 43 insertions(+) diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c index 89013d0a57f9..d23c83492fe9 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.c +++ b/drivers/net/wireless/ath/ath10k/wmi.c @@ -4793,6 +4793,32 @@ static int ath10k_wmi_event_temperature(struct ath10k *ar, struct sk_buff *skb) return 0; } +static int ath10k_wmi_event_pdev_bss_chan_info(struct ath10k *ar, + struct sk_buff *skb) +{ + struct wmi_pdev_bss_chan_info_event *ev; + u64 busy, total, tx, rx, rx_bss; + u32 freq, noise_floor; + + ev = (struct wmi_pdev_bss_chan_info_event *)skb->data; + if (WARN_ON(skb->len < sizeof(*ev))) + return -EPROTO; + + freq = __le32_to_cpu(ev->freq); + noise_floor = __le32_to_cpu(ev->noise_floor); + busy = __le64_to_cpu(ev->cycle_busy); + total = __le64_to_cpu(ev->cycle_total); + tx = __le64_to_cpu(ev->cycle_tx); + rx = __le64_to_cpu(ev->cycle_rx); + rx_bss = __le64_to_cpu(ev->cycle_rx_bss); + + ath10k_dbg(ar, ATH10K_DBG_WMI, + "wmi event pdev bss chan info:\n freq: %d noise: %d cycle: busy %llu total %llu tx %llu rx %llu rx_bss %llu\n", + freq, noise_floor, busy, total, tx, rx, rx_bss); + + return 0; +} + static void ath10k_wmi_op_rx(struct ath10k *ar, struct sk_buff *skb) { struct wmi_cmd_hdr *cmd_hdr; @@ -5136,6 +5162,9 @@ static void ath10k_wmi_10_2_op_rx(struct ath10k *ar, struct sk_buff *skb) case WMI_10_2_PDEV_TEMPERATURE_EVENTID: ath10k_wmi_event_temperature(ar, skb); break; + case WMI_10_2_PDEV_BSS_CHAN_INFO_EVENTID: + ath10k_wmi_event_pdev_bss_chan_info(ar, skb); + break; case WMI_10_2_RTT_KEEPALIVE_EVENTID: case WMI_10_2_GPIO_INPUT_EVENTID: case WMI_10_2_PEER_RATECODE_LIST_EVENTID: @@ -5222,6 +5251,9 @@ static void ath10k_wmi_10_4_op_rx(struct ath10k *ar, struct sk_buff *skb) case WMI_10_4_PDEV_TEMPERATURE_EVENTID: ath10k_wmi_event_temperature(ar, skb); break; + case WMI_10_4_PDEV_BSS_CHAN_INFO_EVENTID: + ath10k_wmi_event_pdev_bss_chan_info(ar, skb); + break; default: ath10k_warn(ar, "Unknown eventid: %d\n", id); break; diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h index 4cdf216ae999..e1043b81a6e6 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.h +++ b/drivers/net/wireless/ath/ath10k/wmi.h @@ -6284,6 +6284,17 @@ struct wmi_pdev_temperature_event { __le32 temperature; } __packed; +struct wmi_pdev_bss_chan_info_event { + __le32 freq; + __le32 noise_floor; + __le64 cycle_busy; + __le64 cycle_total; + __le64 cycle_tx; + __le64 cycle_rx; + __le64 cycle_rx_bss; + __le32 reserved; +} __packed; + /* WOW structures */ enum wmi_wow_wakeup_event { WOW_BMISS_EVENT = 0, -- 2.8.0 _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k
next prev parent reply other threads:[~2016-04-27 10:54 UTC|newest] Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-04-27 10:53 [PATCH v2 1/4] ath10k: add pdev bss channel info wmi definitions Rajkumar Manoharan 2016-04-27 10:53 ` Rajkumar Manoharan 2016-04-27 10:53 ` [PATCH v2 2/4] ath10k: implement wmi_pdev_bss_chan_info_request Rajkumar Manoharan 2016-04-27 10:53 ` Rajkumar Manoharan 2016-04-27 10:53 ` Rajkumar Manoharan [this message] 2016-04-27 10:53 ` [PATCH v2 3/4] ath10k: handle pdev_chan_info wmi event Rajkumar Manoharan 2016-04-27 10:53 ` [PATCH v2 4/4] ath10k: update bss channel survey information Rajkumar Manoharan 2016-04-27 10:53 ` Rajkumar Manoharan 2016-05-06 18:10 ` [PATCH v2 1/4] ath10k: add pdev bss channel info wmi definitions Valo, Kalle 2016-05-06 18:10 ` Valo, Kalle
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1461754402-7679-3-git-send-email-rmanohar@qti.qualcomm.com \ --to=rmanohar@qti.qualcomm.com \ --cc=ath10k@lists.infradead.org \ --cc=linux-wireless@vger.kernel.org \ --cc=rmanohar@codeaurora.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.