[PATCH v6 03/11] thermal: qcom: tsens-8974: Add support for 8974 family of SoCs

From: Rajendra Nayak <rnayak@codeaurora.org>
To: edubezval@gmail.com, andy.gross@linaro.org
Cc: linux-arm-msm@vger.kernel.org, linux-pm@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, rui.zhang@intel.com,
	sboyd@codeaurora.org, nrajan@codeaurora.org,
	lina.iyer@linaro.org, punit.agrawal@arm.com,
	Rajendra Nayak <rnayak@codeaurora.org>
Subject: [PATCH v6 03/11] thermal: qcom: tsens-8974: Add support for 8974 family of SoCs
Date: Thu,  5 May 2016 14:21:41 +0530	[thread overview]
Message-ID: <1462438309-11196-4-git-send-email-rnayak@codeaurora.org> (raw)
In-Reply-To: <1462438309-11196-1-git-send-email-rnayak@codeaurora.org>

Add .calibrate support for 8974 family as part of tsens_ops.

Based on the original code by Siddartha Mohanadoss and Stephen Boyd.

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
---
 drivers/thermal/qcom/Makefile     |   2 +-
 drivers/thermal/qcom/tsens-8974.c | 244 ++++++++++++++++++++++++++++++++++++++
 drivers/thermal/qcom/tsens.c      |   1 +
 drivers/thermal/qcom/tsens.h      |   2 +-
 4 files changed, 247 insertions(+), 2 deletions(-)
 create mode 100644 drivers/thermal/qcom/tsens-8974.c

diff --git a/drivers/thermal/qcom/Makefile b/drivers/thermal/qcom/Makefile
index 05c98e4..a471100 100644
--- a/drivers/thermal/qcom/Makefile
+++ b/drivers/thermal/qcom/Makefile
@@ -1,2 +1,2 @@
 obj-$(CONFIG_QCOM_TSENS)	+= qcom_tsens.o
-qcom_tsens-y			+= tsens.o tsens-common.o tsens-8916.o
+qcom_tsens-y			+= tsens.o tsens-common.o tsens-8916.o tsens-8974.o
diff --git a/drivers/thermal/qcom/tsens-8974.c b/drivers/thermal/qcom/tsens-8974.c
new file mode 100644
index 0000000..da3ca4c
--- /dev/null
+++ b/drivers/thermal/qcom/tsens-8974.c
@@ -0,0 +1,244 @@
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include "tsens.h"
+
+/* eeprom layout data for 8974 */
+#define BASE1_MASK		0xff
+#define S0_P1_MASK		0x3f00
+#define S1_P1_MASK		0xfc000
+#define S2_P1_MASK		0x3f00000
+#define S3_P1_MASK		0xfc000000
+#define S4_P1_MASK		0x3f
+#define S5_P1_MASK		0xfc0
+#define S6_P1_MASK		0x3f000
+#define S7_P1_MASK		0xfc0000
+#define S8_P1_MASK		0x3f000000
+#define S8_P1_MASK_BKP		0x3f
+#define S9_P1_MASK		0x3f
+#define S9_P1_MASK_BKP		0xfc0
+#define S10_P1_MASK		0xfc0
+#define S10_P1_MASK_BKP		0x3f000
+#define CAL_SEL_0_1		0xc0000000
+#define CAL_SEL_2		0x40000000
+#define CAL_SEL_SHIFT		30
+#define CAL_SEL_SHIFT_2		28
+
+#define S0_P1_SHIFT		8
+#define S1_P1_SHIFT		14
+#define S2_P1_SHIFT		20
+#define S3_P1_SHIFT		26
+#define S5_P1_SHIFT		6
+#define S6_P1_SHIFT		12
+#define S7_P1_SHIFT		18
+#define S8_P1_SHIFT		24
+#define S9_P1_BKP_SHIFT		6
+#define S10_P1_SHIFT		6
+#define S10_P1_BKP_SHIFT	12
+
+#define BASE2_SHIFT		12
+#define BASE2_BKP_SHIFT		18
+#define S0_P2_SHIFT		20
+#define S0_P2_BKP_SHIFT		26
+#define S1_P2_SHIFT		26
+#define S2_P2_BKP_SHIFT		6
+#define S3_P2_SHIFT		6
+#define S3_P2_BKP_SHIFT		12
+#define S4_P2_SHIFT		12
+#define S4_P2_BKP_SHIFT		18
+#define S5_P2_SHIFT		18
+#define S5_P2_BKP_SHIFT		24
+#define S6_P2_SHIFT		24
+#define S7_P2_BKP_SHIFT		6
+#define S8_P2_SHIFT		6
+#define S8_P2_BKP_SHIFT		12
+#define S9_P2_SHIFT		12
+#define S9_P2_BKP_SHIFT		18
+#define S10_P2_SHIFT		18
+#define S10_P2_BKP_SHIFT	24
+
+#define BASE2_MASK		0xff000
+#define BASE2_BKP_MASK		0xfc0000
+#define S0_P2_MASK		0x3f00000
+#define S0_P2_BKP_MASK		0xfc000000
+#define S1_P2_MASK		0xfc000000
+#define S1_P2_BKP_MASK		0x3f
+#define S2_P2_MASK		0x3f
+#define S2_P2_BKP_MASK		0xfc0
+#define S3_P2_MASK		0xfc0
+#define S3_P2_BKP_MASK		0x3f000
+#define S4_P2_MASK		0x3f000
+#define S4_P2_BKP_MASK		0xfc0000
+#define S5_P2_MASK		0xfc0000
+#define S5_P2_BKP_MASK		0x3f000000
+#define S6_P2_MASK		0x3f000000
+#define S6_P2_BKP_MASK		0x3f
+#define S7_P2_MASK		0x3f
+#define S7_P2_BKP_MASK		0xfc0
+#define S8_P2_MASK		0xfc0
+#define S8_P2_BKP_MASK		0x3f000
+#define S9_P2_MASK		0x3f000
+#define S9_P2_BKP_MASK		0xfc0000
+#define S10_P2_MASK		0xfc0000
+#define S10_P2_BKP_MASK		0x3f000000
+
+#define BKP_SEL			0x3
+#define BKP_REDUN_SEL		0xe0000000
+#define BKP_REDUN_SHIFT		29
+
+#define BIT_APPEND		0x3
+
+static int calibrate_8974(struct tsens_device *tmdev)
+{
+	int base1 = 0, base2 = 0, i;
+	u32 p1[11], p2[11];
+	int mode = 0;
+	u32 *calib, *bkp;
+	u32 calib_redun_sel;
+
+	calib = (u32 *)qfprom_read(tmdev->dev, "calib");
+	if (IS_ERR(calib))
+		return PTR_ERR(calib);
+
+	bkp = (u32 *)qfprom_read(tmdev->dev, "calib_backup");
+	if (IS_ERR(bkp))
+		return PTR_ERR(bkp);
+
+	calib_redun_sel =  bkp[1] & BKP_REDUN_SEL;
+	calib_redun_sel >>= BKP_REDUN_SHIFT;
+
+	if (calib_redun_sel == BKP_SEL) {
+		mode = (calib[4] & CAL_SEL_0_1) >> CAL_SEL_SHIFT;
+		mode |= (calib[5] & CAL_SEL_2) >> CAL_SEL_SHIFT_2;
+
+		switch (mode) {
+		case TWO_PT_CALIB:
+			base2 = (bkp[2] & BASE2_BKP_MASK) >> BASE2_BKP_SHIFT;
+			p2[0] = (bkp[2] & S0_P2_BKP_MASK) >> S0_P2_BKP_SHIFT;
+			p2[1] = (bkp[3] & S1_P2_BKP_MASK);
+			p2[2] = (bkp[3] & S2_P2_BKP_MASK) >> S2_P2_BKP_SHIFT;
+			p2[3] = (bkp[3] & S3_P2_BKP_MASK) >> S3_P2_BKP_SHIFT;
+			p2[4] = (bkp[3] & S4_P2_BKP_MASK) >> S4_P2_BKP_SHIFT;
+			p2[5] = (calib[4] & S5_P2_BKP_MASK) >> S5_P2_BKP_SHIFT;
+			p2[6] = (calib[5] & S6_P2_BKP_MASK);
+			p2[7] = (calib[5] & S7_P2_BKP_MASK) >> S7_P2_BKP_SHIFT;
+			p2[8] = (calib[5] & S8_P2_BKP_MASK) >> S8_P2_BKP_SHIFT;
+			p2[9] = (calib[5] & S9_P2_BKP_MASK) >> S9_P2_BKP_SHIFT;
+			p2[10] = (calib[5] & S10_P2_BKP_MASK) >> S10_P2_BKP_SHIFT;
+			/* Fall through */
+		case ONE_PT_CALIB:
+		case ONE_PT_CALIB2:
+			base1 = bkp[0] & BASE1_MASK;
+			p1[0] = (bkp[0] & S0_P1_MASK) >> S0_P1_SHIFT;
+			p1[1] = (bkp[0] & S1_P1_MASK) >> S1_P1_SHIFT;
+			p1[2] = (bkp[0] & S2_P1_MASK) >> S2_P1_SHIFT;
+			p1[3] = (bkp[0] & S3_P1_MASK) >> S3_P1_SHIFT;
+			p1[4] = (bkp[1] & S4_P1_MASK);
+			p1[5] = (bkp[1] & S5_P1_MASK) >> S5_P1_SHIFT;
+			p1[6] = (bkp[1] & S6_P1_MASK) >> S6_P1_SHIFT;
+			p1[7] = (bkp[1] & S7_P1_MASK) >> S7_P1_SHIFT;
+			p1[8] = (bkp[2] & S8_P1_MASK_BKP) >> S8_P1_SHIFT;
+			p1[9] = (bkp[2] & S9_P1_MASK_BKP) >> S9_P1_BKP_SHIFT;
+			p1[10] = (bkp[2] & S10_P1_MASK_BKP) >> S10_P1_BKP_SHIFT;
+			break;
+		}
+	} else {
+		mode = (calib[1] & CAL_SEL_0_1) >> CAL_SEL_SHIFT;
+		mode |= (calib[3] & CAL_SEL_2) >> CAL_SEL_SHIFT_2;
+
+		switch (mode) {
+		case TWO_PT_CALIB:
+			base2 = (calib[2] & BASE2_MASK) >> BASE2_SHIFT;
+			p2[0] = (calib[2] & S0_P2_MASK) >> S0_P2_SHIFT;
+			p2[1] = (calib[2] & S1_P2_MASK) >> S1_P2_SHIFT;
+			p2[2] = (calib[3] & S2_P2_MASK);
+			p2[3] = (calib[3] & S3_P2_MASK) >> S3_P2_SHIFT;
+			p2[4] = (calib[3] & S4_P2_MASK) >> S4_P2_SHIFT;
+			p2[5] = (calib[3] & S5_P2_MASK) >> S5_P2_SHIFT;
+			p2[6] = (calib[3] & S6_P2_MASK) >> S6_P2_SHIFT;
+			p2[7] = (calib[4] & S7_P2_MASK);
+			p2[8] = (calib[4] & S8_P2_MASK) >> S8_P2_SHIFT;
+			p2[9] = (calib[4] & S9_P2_MASK) >> S9_P2_SHIFT;
+			p2[10] = (calib[4] & S10_P2_MASK) >> S10_P2_SHIFT;
+			/* Fall through */
+		case ONE_PT_CALIB:
+		case ONE_PT_CALIB2:
+			base1 = calib[0] & BASE1_MASK;
+			p1[0] = (calib[0] & S0_P1_MASK) >> S0_P1_SHIFT;
+			p1[1] = (calib[0] & S1_P1_MASK) >> S1_P1_SHIFT;
+			p1[2] = (calib[0] & S2_P1_MASK) >> S2_P1_SHIFT;
+			p1[3] = (calib[0] & S3_P1_MASK) >> S3_P1_SHIFT;
+			p1[4] = (calib[1] & S4_P1_MASK);
+			p1[5] = (calib[1] & S5_P1_MASK) >> S5_P1_SHIFT;
+			p1[6] = (calib[1] & S6_P1_MASK) >> S6_P1_SHIFT;
+			p1[7] = (calib[1] & S7_P1_MASK) >> S7_P1_SHIFT;
+			p1[8] = (calib[1] & S8_P1_MASK) >> S8_P1_SHIFT;
+			p1[9] = (calib[2] & S9_P1_MASK);
+			p1[10] = (calib[2] & S10_P1_MASK) >> S10_P1_SHIFT;
+			break;
+		}
+	}
+
+	switch (mode) {
+	case ONE_PT_CALIB:
+		for (i = 0; i < tmdev->num_sensors; i++)
+			p1[i] += (base1 << 2) | BIT_APPEND;
+		break;
+	case TWO_PT_CALIB:
+		for (i = 0; i < tmdev->num_sensors; i++) {
+			p2[i] += base2;
+			p2[i] <<= 2;
+			p2[i] |= BIT_APPEND;
+		}
+		/* Fall through */
+	case ONE_PT_CALIB2:
+		for (i = 0; i < tmdev->num_sensors; i++) {
+			p1[i] += base1;
+			p1[i] <<= 2;
+			p1[i] |= BIT_APPEND;
+		}
+		break;
+	default:
+		for (i = 0; i < tmdev->num_sensors; i++)
+			p2[i] = 780;
+		p1[0] = 502;
+		p1[1] = 509;
+		p1[2] = 503;
+		p1[3] = 509;
+		p1[4] = 505;
+		p1[5] = 509;
+		p1[6] = 507;
+		p1[7] = 510;
+		p1[8] = 508;
+		p1[9] = 509;
+		p1[10] = 508;
+		break;
+	}
+
+	compute_intercept_slope(tmdev, p1, p2, mode);
+
+	return 0;
+}
+
+const struct tsens_ops ops_8974 = {
+	.init		= init_common,
+	.calibrate	= calibrate_8974,
+	.get_temp	= get_temp_common,
+};
+
+const struct tsens_data data_8974 = {
+	.num_sensors	= 11,
+	.ops		= &ops_8974,
+};
diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index 7f3dfa1..5f206e3 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -68,6 +68,7 @@ static const struct of_device_id tsens_table[] = {
 		.data = &data_8916,
 	}, {
 		.compatible = "qcom,msm8974-tsens",
+		.data = &data_8974,
 	},
 	{}
 };
diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
index e767ad5..8ab9997 100644
--- a/drivers/thermal/qcom/tsens.h
+++ b/drivers/thermal/qcom/tsens.h
@@ -87,6 +87,6 @@ void compute_intercept_slope(struct tsens_device *, u32 *, u32 *, u32);
 int init_common(struct tsens_device *);
 int get_temp_common(struct tsens_device *, int, int *);
 
-extern const struct tsens_data data_8916;
+extern const struct tsens_data data_8916, data_8974;
 
 #endif /* __QCOM_TSENS_H__ */
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
