From: Joel Stanley <joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
To: robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org,
jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org,
marc.zyngier-5wv7dgnIgG8@public.gmane.org
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
jk-mnsaURCQ41sdnm+yROfE0A@public.gmane.org,
benh-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r@public.gmane.org,
arnd-r2nGTMty4D4@public.gmane.org,
baruch-NswTu9S1W3P6gbPvEgmw2w@public.gmane.org,
andrew-zrmu5oMJ5Fs@public.gmane.org
Subject: [PATCH v3 1/2] doc/devicetree: Add Aspeed VIC bindings
Date: Fri, 13 May 2016 00:13:12 +0930 [thread overview]
Message-ID: <1463064193-2178-2-git-send-email-joel@jms.id.au> (raw)
In-Reply-To: <1463064193-2178-1-git-send-email-joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
Signed-off-by: Joel Stanley <joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
---
.../interrupt-controller/aspeed,ast2400-vic.txt | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-vic.txt
diff --git a/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-vic.txt b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-vic.txt
new file mode 100644
index 000000000000..6c6e85324b9d
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-vic.txt
@@ -0,0 +1,22 @@
+Aspeed Vectored Interrupt Controller
+
+These bindings are for the Aspeed AST2400 interrupt controller register layout.
+The SoC has an legacy register layout, but this driver does not support that
+mode of operation.
+
+Required properties:
+
+- compatible : should be "aspeed,ast2400-vic".
+
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source. The value shall be 1.
+
+Example:
+
+ vic: interrupt-controller@1e6c0080 {
+ compatible = "aspeed,ast2400-vic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x1e6c0080 0x80>;
+ };
--
2.8.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: joel@jms.id.au (Joel Stanley)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 1/2] doc/devicetree: Add Aspeed VIC bindings
Date: Fri, 13 May 2016 00:13:12 +0930 [thread overview]
Message-ID: <1463064193-2178-2-git-send-email-joel@jms.id.au> (raw)
In-Reply-To: <1463064193-2178-1-git-send-email-joel@jms.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
.../interrupt-controller/aspeed,ast2400-vic.txt | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-vic.txt
diff --git a/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-vic.txt b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-vic.txt
new file mode 100644
index 000000000000..6c6e85324b9d
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-vic.txt
@@ -0,0 +1,22 @@
+Aspeed Vectored Interrupt Controller
+
+These bindings are for the Aspeed AST2400 interrupt controller register layout.
+The SoC has an legacy register layout, but this driver does not support that
+mode of operation.
+
+Required properties:
+
+- compatible : should be "aspeed,ast2400-vic".
+
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source. The value shall be 1.
+
+Example:
+
+ vic: interrupt-controller at 1e6c0080 {
+ compatible = "aspeed,ast2400-vic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x1e6c0080 0x80>;
+ };
--
2.8.1
next prev parent reply other threads:[~2016-05-12 14:43 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <462797239-14765-1-git-send-email-joel@jms.id.au>
2016-05-09 13:58 ` [PATCH v2 0/2] irqchip: Support Aspeed IRQ controller Joel Stanley
2016-05-09 13:58 ` Joel Stanley
2016-05-09 13:58 ` [PATCH v2 1/2] doc/devicetree: Add Aspeed VIC bindings Joel Stanley
2016-05-09 13:58 ` Joel Stanley
[not found] ` <1462802317-27086-2-git-send-email-joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
2016-05-11 14:33 ` Rob Herring
2016-05-11 14:33 ` Rob Herring
2016-05-12 1:01 ` Benjamin Herrenschmidt
2016-05-12 1:01 ` Benjamin Herrenschmidt
[not found] ` <1463014882.20290.203.camel-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r@public.gmane.org>
2016-05-12 17:20 ` Rob Herring
2016-05-12 17:20 ` Rob Herring
[not found] ` <CAL_JsqJDGmvDxm1kN1w6NQZs0JLeA-V=X_BWi=VOaMTwftLn-w-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-05-18 13:50 ` Joel Stanley
2016-05-18 13:50 ` Joel Stanley
[not found] ` <CACPK8Xe6TDdV3dC=gizXLxLjUziDFhsupUbXSuYsn6bcrAxahQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-05-20 20:13 ` Rob Herring
2016-05-20 20:13 ` Rob Herring
[not found] ` <1462802317-27086-1-git-send-email-joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
2016-05-09 13:58 ` [PATCH v2 2/2] irqchip: Add irq controller for Aspeed Joel Stanley
2016-05-09 13:58 ` Joel Stanley
2016-05-12 14:43 ` [PATCH v3 0/2] irqchip: Support Aspeed IRQ controller Joel Stanley
2016-05-12 14:43 ` Joel Stanley
[not found] ` <1463064193-2178-1-git-send-email-joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
2016-05-12 14:43 ` Joel Stanley [this message]
2016-05-12 14:43 ` [PATCH v3 1/2] doc/devicetree: Add Aspeed VIC bindings Joel Stanley
2016-05-12 14:43 ` [PATCH v3 2/2] irqchip: Add irq controller for Aspeed Joel Stanley
2016-05-12 14:43 ` Joel Stanley
2016-06-22 18:53 ` [PATCH v3 0/2] irqchip: Support Aspeed IRQ controller Jason Cooper
2016-06-22 18:53 ` Jason Cooper
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1463064193-2178-2-git-send-email-joel@jms.id.au \
--to=joel-u3u1mxzcp9khxe+lvdladg@public.gmane.org \
--cc=andrew-zrmu5oMJ5Fs@public.gmane.org \
--cc=arnd-r2nGTMty4D4@public.gmane.org \
--cc=baruch-NswTu9S1W3P6gbPvEgmw2w@public.gmane.org \
--cc=benh-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org \
--cc=jk-mnsaURCQ41sdnm+yROfE0A@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=marc.zyngier-5wv7dgnIgG8@public.gmane.org \
--cc=robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.