From: Neil Armstrong <narmstrong@baylibre.com>
To: Wim Van Sebroeck <wim@iguana.be>,
Guenter Roeck <linux@roeck-us.net>,
devicetree@vger.kernel.org
Cc: Neil Armstrong <narmstrong@baylibre.com>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org,
linux-watchdog@vger.kernel.org
Subject: [PATCH 2/3] dt-bindings: watchdog: Add Meson GXBB Watchdog bindings
Date: Mon, 30 May 2016 16:12:06 +0200 [thread overview]
Message-ID: <1464617526-29140-1-git-send-email-narmstrong@baylibre.com> (raw)
In-Reply-To: <1464614948-28247-1-git-send-email-narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
.../devicetree/bindings/watchdog/meson-gxbb-wdt.txt | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
create mode 100644 Documentation/devicetree/bindings/watchdog/meson-gxbb-wdt.txt
diff --git a/Documentation/devicetree/bindings/watchdog/meson-gxbb-wdt.txt b/Documentation/devicetree/bindings/watchdog/meson-gxbb-wdt.txt
new file mode 100644
index 0000000..c7fe36f
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/meson-gxbb-wdt.txt
@@ -0,0 +1,16 @@
+Meson GXBB SoCs Watchdog timer
+
+Required properties:
+
+- compatible : should be "amlogic,meson-gxbb-wdt"
+- reg : Specifies base physical address and size of the registers.
+- clocks : Should be a phandle to the Watchdog clock source, for GXBB the xtal
+ is the default clock source.
+
+Example:
+
+wdt: watchdog@98d0 {
+ compatible = "amlogic,meson-gxbb-wdt";
+ reg = <0 0x98d0 0x0 0x10>;
+ clocks = <&xtal>;
+};
--
2.7.0
WARNING: multiple messages have this Message-ID (diff)
From: Neil Armstrong <narmstrong-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
To: Wim Van Sebroeck <wim-IQzOog9fTRqzQB+pC5nmwQ@public.gmane.org>,
Guenter Roeck <linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Neil Armstrong
<narmstrong-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-watchdog-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH 2/3] dt-bindings: watchdog: Add Meson GXBB Watchdog bindings
Date: Mon, 30 May 2016 16:12:06 +0200 [thread overview]
Message-ID: <1464617526-29140-1-git-send-email-narmstrong@baylibre.com> (raw)
In-Reply-To: <1464614948-28247-1-git-send-email-narmstrong-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
Signed-off-by: Neil Armstrong <narmstrong-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
---
.../devicetree/bindings/watchdog/meson-gxbb-wdt.txt | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
create mode 100644 Documentation/devicetree/bindings/watchdog/meson-gxbb-wdt.txt
diff --git a/Documentation/devicetree/bindings/watchdog/meson-gxbb-wdt.txt b/Documentation/devicetree/bindings/watchdog/meson-gxbb-wdt.txt
new file mode 100644
index 0000000..c7fe36f
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/meson-gxbb-wdt.txt
@@ -0,0 +1,16 @@
+Meson GXBB SoCs Watchdog timer
+
+Required properties:
+
+- compatible : should be "amlogic,meson-gxbb-wdt"
+- reg : Specifies base physical address and size of the registers.
+- clocks : Should be a phandle to the Watchdog clock source, for GXBB the xtal
+ is the default clock source.
+
+Example:
+
+wdt: watchdog@98d0 {
+ compatible = "amlogic,meson-gxbb-wdt";
+ reg = <0 0x98d0 0x0 0x10>;
+ clocks = <&xtal>;
+};
--
2.7.0
--
To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: narmstrong@baylibre.com (Neil Armstrong)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/3] dt-bindings: watchdog: Add Meson GXBB Watchdog bindings
Date: Mon, 30 May 2016 16:12:06 +0200 [thread overview]
Message-ID: <1464617526-29140-1-git-send-email-narmstrong@baylibre.com> (raw)
In-Reply-To: <1464614948-28247-1-git-send-email-narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
.../devicetree/bindings/watchdog/meson-gxbb-wdt.txt | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
create mode 100644 Documentation/devicetree/bindings/watchdog/meson-gxbb-wdt.txt
diff --git a/Documentation/devicetree/bindings/watchdog/meson-gxbb-wdt.txt b/Documentation/devicetree/bindings/watchdog/meson-gxbb-wdt.txt
new file mode 100644
index 0000000..c7fe36f
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/meson-gxbb-wdt.txt
@@ -0,0 +1,16 @@
+Meson GXBB SoCs Watchdog timer
+
+Required properties:
+
+- compatible : should be "amlogic,meson-gxbb-wdt"
+- reg : Specifies base physical address and size of the registers.
+- clocks : Should be a phandle to the Watchdog clock source, for GXBB the xtal
+ is the default clock source.
+
+Example:
+
+wdt: watchdog at 98d0 {
+ compatible = "amlogic,meson-gxbb-wdt";
+ reg = <0 0x98d0 0x0 0x10>;
+ clocks = <&xtal>;
+};
--
2.7.0
WARNING: multiple messages have this Message-ID (diff)
From: narmstrong@baylibre.com (Neil Armstrong)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH 2/3] dt-bindings: watchdog: Add Meson GXBB Watchdog bindings
Date: Mon, 30 May 2016 16:12:06 +0200 [thread overview]
Message-ID: <1464617526-29140-1-git-send-email-narmstrong@baylibre.com> (raw)
In-Reply-To: <1464614948-28247-1-git-send-email-narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
.../devicetree/bindings/watchdog/meson-gxbb-wdt.txt | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
create mode 100644 Documentation/devicetree/bindings/watchdog/meson-gxbb-wdt.txt
diff --git a/Documentation/devicetree/bindings/watchdog/meson-gxbb-wdt.txt b/Documentation/devicetree/bindings/watchdog/meson-gxbb-wdt.txt
new file mode 100644
index 0000000..c7fe36f
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/meson-gxbb-wdt.txt
@@ -0,0 +1,16 @@
+Meson GXBB SoCs Watchdog timer
+
+Required properties:
+
+- compatible : should be "amlogic,meson-gxbb-wdt"
+- reg : Specifies base physical address and size of the registers.
+- clocks : Should be a phandle to the Watchdog clock source, for GXBB the xtal
+ is the default clock source.
+
+Example:
+
+wdt: watchdog at 98d0 {
+ compatible = "amlogic,meson-gxbb-wdt";
+ reg = <0 0x98d0 0x0 0x10>;
+ clocks = <&xtal>;
+};
--
2.7.0
next prev parent reply other threads:[~2016-05-30 14:11 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-30 13:29 [PATCH 0/3] watchdog: Add Amlogic Meson GXBB Watchdog Timer driver Neil Armstrong
2016-05-30 13:29 ` Neil Armstrong
2016-05-30 13:29 ` Neil Armstrong
2016-05-30 13:29 ` [PATCH 1/3] watchdog: Add Meson GXBB Watchdog Driver Neil Armstrong
2016-05-30 13:29 ` Neil Armstrong
2016-05-30 13:29 ` Neil Armstrong
2016-05-30 13:51 ` Carlo Caione
2016-05-30 13:51 ` Carlo Caione
2016-05-30 13:51 ` Carlo Caione
2016-05-30 14:44 ` Guenter Roeck
2016-05-30 14:44 ` Guenter Roeck
2016-05-30 14:44 ` Guenter Roeck
2016-05-30 16:50 ` Guenter Roeck
2016-05-30 16:50 ` Guenter Roeck
2016-05-30 16:50 ` Guenter Roeck
2016-05-31 9:57 ` Neil Armstrong
2016-05-31 9:57 ` Neil Armstrong
2016-05-31 9:57 ` Neil Armstrong
2016-05-31 17:31 ` Guenter Roeck
2016-05-31 17:31 ` Guenter Roeck
2016-05-31 17:31 ` Guenter Roeck
2016-05-30 13:29 ` [PATCH 3/3] ARM64: dts: amlogic: meson-gxbb: Add watchdog node Neil Armstrong
2016-05-30 13:29 ` Neil Armstrong
2016-05-30 13:29 ` Neil Armstrong
2016-05-30 13:45 ` [PATCH 0/3] watchdog: Add Amlogic Meson GXBB Watchdog Timer driver Carlo Caione
2016-05-30 13:45 ` Carlo Caione
2016-05-30 13:45 ` Carlo Caione
2016-05-30 14:13 ` Neil Armstrong
2016-05-30 14:13 ` Neil Armstrong
2016-05-30 14:13 ` Neil Armstrong
2016-05-30 14:12 ` Neil Armstrong [this message]
2016-05-30 14:12 ` [PATCH 2/3] dt-bindings: watchdog: Add Meson GXBB Watchdog bindings Neil Armstrong
2016-05-30 14:12 ` Neil Armstrong
2016-05-30 14:12 ` Neil Armstrong
2016-06-02 22:47 ` Rob Herring
2016-06-02 22:47 ` Rob Herring
2016-06-02 22:47 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1464617526-29140-1-git-send-email-narmstrong@baylibre.com \
--to=narmstrong@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=wim@iguana.be \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.