From: "Darrick J. Wong" <darrick.wong@oracle.com> To: david@fromorbit.com, eguan@redhat.com, darrick.wong@oracle.com Cc: linux-btrfs@vger.kernel.org, fstests@vger.kernel.org, xfs@oss.sgi.com Subject: [PATCH 01/17] xfs/26[34]: remove duplicate tests Date: Thu, 21 Jul 2016 16:46:21 -0700 [thread overview] Message-ID: <146914478187.11762.1309628175021637188.stgit@birch.djwong.org> (raw) In-Reply-To: <146914477514.11762.3144320628851923350.stgit@birch.djwong.org> These two tests were accidentally double-added as xfs/30[78], but the newer versions have fixed up helper usage and fewer whitespace problems, so nuke the old tests. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> --- tests/xfs/263 | 179 ----------------------------------------------------- tests/xfs/263.out | 13 ---- tests/xfs/264 | 180 ----------------------------------------------------- tests/xfs/264.out | 13 ---- tests/xfs/group | 2 - 5 files changed, 387 deletions(-) delete mode 100755 tests/xfs/263 delete mode 100644 tests/xfs/263.out delete mode 100755 tests/xfs/264 delete mode 100644 tests/xfs/264.out diff --git a/tests/xfs/263 b/tests/xfs/263 deleted file mode 100755 index 6659dee..0000000 --- a/tests/xfs/263 +++ /dev/null @@ -1,179 +0,0 @@ -#! /bin/bash -# FS QA Test No. 263 -# -# Test recovery of "lost" CoW blocks: -# - Use the debugger to fake a leftover CoW extent -# - See if xfs_repair fixes it -# -#----------------------------------------------------------------------- -# Copyright (c) 2016, Oracle and/or its affiliates. All Rights Reserved. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation. -# -# This program is distributed in the hope that it would be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write the Free Software Foundation, -# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -#----------------------------------------------------------------------- - -seq=`basename $0` -seqres=$RESULT_DIR/$seq -echo "QA output created by $seq" - -here=`pwd` -tmp=/tmp/$$ -status=1 # failure is the default! -trap "_cleanup; exit \$status" 0 1 2 3 15 - -_cleanup() -{ - cd / - rm -rf $tmp.* -} - -# get standard environment, filters and checks -. ./common/rc -. ./common/filter -. ./common/reflink - -# real QA test starts here -_supported_os Linux -_supported_fs xfs -_require_scratch_reflink - -rm -f $seqres.full - -echo "Format" -_scratch_mkfs > $seqres.full 2>&1 -_scratch_mount >> $seqres.full -is_rmap=$(xfs_info $SCRATCH_MNT | grep -c "rmapbt=1") -umount $SCRATCH_MNT - -_get_agf_data() { - field="$1" - shift - - xfs_db -c 'agf 1' "$@" -c "p $field" $SCRATCH_DEV | awk '{print $3}' -} - -_set_agf_data() { - field="$1" - value="$2" - shift; shift - - xfs_db -x -c 'agf 1' "$@" -c "write $field -- $value" $SCRATCH_DEV >> $seqres.full -} - -_get_sb_data() { - field="$1" - shift - - xfs_db -c 'sb 0' "$@" -c "p $field" $SCRATCH_DEV | awk '{print $3}' -} - -_set_sb_data() { - field="$1" - value="$2" - shift; shift - - xfs_db -x -c 'sb 0' "$@" -c "write $field -- $value" $SCRATCH_DEV >> $seqres.full -} - -_filter_leftover() { - grep "^leftover" | sed -e "s/[0-9]\+/NR/g" -} - -_dump_status() { - echo "** " "$@" - xfs_db -c 'sb 0' -c p $SCRATCH_DEV - echo "** agf header" - xfs_db -c 'agf 1' -c p $SCRATCH_DEV - echo "** refcntbt" - xfs_db -c 'agf 1' -c 'addr refcntroot' -c p $SCRATCH_DEV - echo "** rmapbt" - test $is_rmap -gt 0 && xfs_db -c 'agf 1' -c 'addr rmaproot' -c p $SCRATCH_DEV - echo "** bnobt" - xfs_db -c 'agf 1' -c 'addr bnoroot' -c p $SCRATCH_DEV - echo "** cntbt" - xfs_db -c 'agf 1' -c 'addr cntroot' -c p $SCRATCH_DEV -} - -echo "We need AG1 to have a single free extent" -bno_lvl=$(_get_agf_data level -c 'addr bnoroot') -bno_nr=$(_get_agf_data numrecs -c 'addr bnoroot') -refc_lvl=$(_get_agf_data level -c 'addr refcntroot') -refc_nr=$(_get_agf_data numrecs -c 'addr refcntroot') - -test $bno_lvl -eq 0 || echo " AG 1 bnobt must only have one level" -test $bno_nr -eq 1 || echo " AG 1 bnobt must only have one record" -test $refc_lvl -eq 0 || echo " AG 1 refcountbt must only have one level" -test $refc_nr -eq 0 || echo " AG 1 refcountbt must only have one record" - -if [ $is_rmap -gt 0 ]; then - rmap_lvl=$(_get_agf_data level -c 'addr rmaproot') - rmap_nr=$(_get_agf_data numrecs -c 'addr rmaproot') - test $rmap_lvl -eq 0 || echo " AG 1 rmapbt must only have one level" -fi - -echo "Find our extent and old counter values" -bno=$(_get_agf_data "recs[1].startblock" -c 'addr bnoroot') -len=$(_get_agf_data "recs[1].blockcount" -c 'addr bnoroot') -agf_freeblks=$(_get_agf_data freeblks) -sb_fdblocks=$(_get_sb_data fdblocks) - -test $len -ge 200 || echo " AG 1 doesn't have enough free blocks" - -# Take the last 100 blocks of the free extent -debris_len=100 -debris_bno=$((bno + len - debris_len)) - -echo "Remove the extent from the freesp btrees" -_set_agf_data "recs[1].blockcount" $((len - debris_len)) -c 'addr bnoroot' -_set_agf_data "recs[1].blockcount" $((len - debris_len)) -c 'addr cntroot' -_set_agf_data freeblks $((agf_freeblks - debris_len)) -_set_agf_data longest $((len - debris_len)) -_set_sb_data fdblocks $((sb_fdblocks - debris_len)) - -echo "Add the extent to the refcount btree" -_set_agf_data numrecs 1 -c 'addr refcntroot' -_set_agf_data "recs[1].startblock" $debris_bno -c 'addr refcntroot' -_set_agf_data "recs[1].blockcount" $debris_len -c 'addr refcntroot' -_set_agf_data "recs[1].refcount" 1 -c 'addr refcntroot' - -if [ $is_rmap -gt 0 ]; then - rmap_nr=$((rmap_nr + 1)) - _set_agf_data numrecs $rmap_nr -c 'addr rmaproot' - _set_agf_data "recs[$rmap_nr].startblock" $debris_bno -c 'addr rmaproot' - _set_agf_data "recs[$rmap_nr].blockcount" $debris_len -c 'addr rmaproot' - _set_agf_data "recs[$rmap_nr].owner" -9 -c 'addr rmaproot' - _set_agf_data "recs[$rmap_nr].offset" 0 -c 'addr rmaproot' -fi - -_dump_status "broken fs config" >> $seqres.full - -echo "Look for leftover warning in xfs_check" -_scratch_xfs_check | _filter_leftover - -echo "Look for leftover warning in xfs_repair" -_scratch_xfs_repair -n 2>&1 | _filter_leftover - -echo "Fix filesystem" -_scratch_xfs_repair >> $seqres.full 2>&1 || echo "xfs_repair failed?" - -_dump_status "supposedly fixed fs config" >> $seqres.full - -echo "Look for no more leftover warning in xfs_check" -_scratch_xfs_check | _filter_leftover - -echo "Look for no more leftover warning in xfs_repair" -_scratch_xfs_repair -n 2>&1 | _filter_leftover - -# success, all done -status=0 -exit diff --git a/tests/xfs/263.out b/tests/xfs/263.out deleted file mode 100644 index bc3eea9..0000000 --- a/tests/xfs/263.out +++ /dev/null @@ -1,13 +0,0 @@ -QA output created by 263 -Format -We need AG1 to have a single free extent -Find our extent and old counter values -Remove the extent from the freesp btrees -Add the extent to the refcount btree -Look for leftover warning in xfs_check -leftover CoW extent (NR/NR) len NR -Look for leftover warning in xfs_repair -leftover CoW extent (NR/NR) len NR -Fix filesystem -Look for no more leftover warning in xfs_check -Look for no more leftover warning in xfs_repair diff --git a/tests/xfs/264 b/tests/xfs/264 deleted file mode 100755 index 190361d..0000000 --- a/tests/xfs/264 +++ /dev/null @@ -1,180 +0,0 @@ -#! /bin/bash -# FS QA Test No. 264 -# -# Test recovery of "lost" CoW blocks: -# - Use the debugger to fake a leftover CoW extent -# - See if mount/umount fixes it -# -#----------------------------------------------------------------------- -# Copyright (c) 2016, Oracle and/or its affiliates. All Rights Reserved. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation. -# -# This program is distributed in the hope that it would be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write the Free Software Foundation, -# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -#----------------------------------------------------------------------- - -seq=`basename $0` -seqres=$RESULT_DIR/$seq -echo "QA output created by $seq" - -here=`pwd` -tmp=/tmp/$$ -status=1 # failure is the default! -trap "_cleanup; exit \$status" 0 1 2 3 15 - -_cleanup() -{ - cd / - rm -rf $tmp.* -} - -# get standard environment, filters and checks -. ./common/rc -. ./common/filter -. ./common/reflink - -# real QA test starts here -_supported_os Linux -_supported_fs xfs -_require_scratch_reflink - -rm -f $seqres.full - -echo "Format" -_scratch_mkfs > $seqres.full 2>&1 -_scratch_mount >> $seqres.full -is_rmap=$(xfs_info $SCRATCH_MNT | grep -c "rmapbt=1") -umount $SCRATCH_MNT - -_get_agf_data() { - field="$1" - shift - - xfs_db -c 'agf 1' "$@" -c "p $field" $SCRATCH_DEV | awk '{print $3}' -} - -_set_agf_data() { - field="$1" - value="$2" - shift; shift - - xfs_db -x -c 'agf 1' "$@" -c "write $field -- $value" $SCRATCH_DEV >> $seqres.full -} - -_get_sb_data() { - field="$1" - shift - - xfs_db -c 'sb 0' "$@" -c "p $field" $SCRATCH_DEV | awk '{print $3}' -} - -_set_sb_data() { - field="$1" - value="$2" - shift; shift - - xfs_db -x -c 'sb 0' "$@" -c "write $field -- $value" $SCRATCH_DEV >> $seqres.full -} - -_filter_leftover() { - grep "^leftover" | sed -e "s/[0-9]\+/NR/g" -} - -_dump_status() { - echo "** " "$@" - xfs_db -c 'sb 0' -c p $SCRATCH_DEV - echo "** agf header" - xfs_db -c 'agf 1' -c p $SCRATCH_DEV - echo "** refcntbt" - xfs_db -c 'agf 1' -c 'addr refcntroot' -c p $SCRATCH_DEV - echo "** rmapbt" - test $is_rmap -gt 0 && xfs_db -c 'agf 1' -c 'addr rmaproot' -c p $SCRATCH_DEV - echo "** bnobt" - xfs_db -c 'agf 1' -c 'addr bnoroot' -c p $SCRATCH_DEV - echo "** cntbt" - xfs_db -c 'agf 1' -c 'addr cntroot' -c p $SCRATCH_DEV -} - -echo "We need AG1 to have a single free extent" -bno_lvl=$(_get_agf_data level -c 'addr bnoroot') -bno_nr=$(_get_agf_data numrecs -c 'addr bnoroot') -refc_lvl=$(_get_agf_data level -c 'addr refcntroot') -refc_nr=$(_get_agf_data numrecs -c 'addr refcntroot') - -test $bno_lvl -eq 0 || echo " AG 1 bnobt must only have one level" -test $bno_nr -eq 1 || echo " AG 1 bnobt must only have one record" -test $refc_lvl -eq 0 || echo " AG 1 refcountbt must only have one level" -test $refc_nr -eq 0 || echo " AG 1 refcountbt must only have one record" - -if [ $is_rmap -gt 0 ]; then - rmap_lvl=$(_get_agf_data level -c 'addr rmaproot') - rmap_nr=$(_get_agf_data numrecs -c 'addr rmaproot') - test $rmap_lvl -eq 0 || echo " AG 1 rmapbt must only have one level" -fi - -echo "Find our extent and old counter values" -bno=$(_get_agf_data "recs[1].startblock" -c 'addr bnoroot') -len=$(_get_agf_data "recs[1].blockcount" -c 'addr bnoroot') -agf_freeblks=$(_get_agf_data freeblks) -sb_fdblocks=$(_get_sb_data fdblocks) - -test $len -ge 200 || echo " AG 1 doesn't have enough free blocks" - -# Take the last 100 blocks of the free extent -debris_len=100 -debris_bno=$((bno + len - debris_len)) - -echo "Remove the extent from the freesp btrees" -_set_agf_data "recs[1].blockcount" $((len - debris_len)) -c 'addr bnoroot' -_set_agf_data "recs[1].blockcount" $((len - debris_len)) -c 'addr cntroot' -_set_agf_data freeblks $((agf_freeblks - debris_len)) -_set_agf_data longest $((len - debris_len)) -_set_sb_data fdblocks $((sb_fdblocks - debris_len)) - -echo "Add the extent to the refcount btree" -_set_agf_data numrecs 1 -c 'addr refcntroot' -_set_agf_data "recs[1].startblock" $debris_bno -c 'addr refcntroot' -_set_agf_data "recs[1].blockcount" $debris_len -c 'addr refcntroot' -_set_agf_data "recs[1].refcount" 1 -c 'addr refcntroot' - -if [ $is_rmap -gt 0 ]; then - rmap_nr=$((rmap_nr + 1)) - _set_agf_data numrecs $rmap_nr -c 'addr rmaproot' - _set_agf_data "recs[$rmap_nr].startblock" $debris_bno -c 'addr rmaproot' - _set_agf_data "recs[$rmap_nr].blockcount" $debris_len -c 'addr rmaproot' - _set_agf_data "recs[$rmap_nr].owner" -9 -c 'addr rmaproot' - _set_agf_data "recs[$rmap_nr].offset" 0 -c 'addr rmaproot' -fi - -_dump_status "broken fs config" >> $seqres.full - -echo "Look for leftover warning in xfs_check" -_scratch_xfs_check | _filter_leftover - -echo "Look for leftover warning in xfs_repair" -_scratch_xfs_repair -n 2>&1 | _filter_leftover - -echo "Mount filesystem" -_scratch_mount -umount $SCRATCH_MNT - -_dump_status "supposedly fixed fs config" >> $seqres.full - -echo "Look for no more leftover warning in xfs_check" -_scratch_xfs_check | _filter_leftover - -echo "Look for no more leftover warning in xfs_repair" -_scratch_xfs_repair -n 2>&1 | _filter_leftover - -# success, all done -status=0 -exit diff --git a/tests/xfs/264.out b/tests/xfs/264.out deleted file mode 100644 index 3faaf42..0000000 --- a/tests/xfs/264.out +++ /dev/null @@ -1,13 +0,0 @@ -QA output created by 264 -Format -We need AG1 to have a single free extent -Find our extent and old counter values -Remove the extent from the freesp btrees -Add the extent to the refcount btree -Look for leftover warning in xfs_check -leftover CoW extent (NR/NR) len NR -Look for leftover warning in xfs_repair -leftover CoW extent (NR/NR) len NR -Mount filesystem -Look for no more leftover warning in xfs_check -Look for no more leftover warning in xfs_repair diff --git a/tests/xfs/group b/tests/xfs/group index 9f8ca0f..aa3b3ec 100644 --- a/tests/xfs/group +++ b/tests/xfs/group @@ -259,8 +259,6 @@ 260 auto quick quota 261 auto quick quota 262 auto quick quota -263 auto quick clone -264 auto quick clone 265 auto clone 266 dump ioctl auto quick 267 dump ioctl tape
WARNING: multiple messages have this Message-ID (diff)
From: "Darrick J. Wong" <darrick.wong@oracle.com> To: david@fromorbit.com, eguan@redhat.com, darrick.wong@oracle.com Cc: fstests@vger.kernel.org, linux-btrfs@vger.kernel.org, xfs@oss.sgi.com Subject: [PATCH 01/17] xfs/26[34]: remove duplicate tests Date: Thu, 21 Jul 2016 16:46:21 -0700 [thread overview] Message-ID: <146914478187.11762.1309628175021637188.stgit@birch.djwong.org> (raw) In-Reply-To: <146914477514.11762.3144320628851923350.stgit@birch.djwong.org> These two tests were accidentally double-added as xfs/30[78], but the newer versions have fixed up helper usage and fewer whitespace problems, so nuke the old tests. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> --- tests/xfs/263 | 179 ----------------------------------------------------- tests/xfs/263.out | 13 ---- tests/xfs/264 | 180 ----------------------------------------------------- tests/xfs/264.out | 13 ---- tests/xfs/group | 2 - 5 files changed, 387 deletions(-) delete mode 100755 tests/xfs/263 delete mode 100644 tests/xfs/263.out delete mode 100755 tests/xfs/264 delete mode 100644 tests/xfs/264.out diff --git a/tests/xfs/263 b/tests/xfs/263 deleted file mode 100755 index 6659dee..0000000 --- a/tests/xfs/263 +++ /dev/null @@ -1,179 +0,0 @@ -#! /bin/bash -# FS QA Test No. 263 -# -# Test recovery of "lost" CoW blocks: -# - Use the debugger to fake a leftover CoW extent -# - See if xfs_repair fixes it -# -#----------------------------------------------------------------------- -# Copyright (c) 2016, Oracle and/or its affiliates. All Rights Reserved. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation. -# -# This program is distributed in the hope that it would be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write the Free Software Foundation, -# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -#----------------------------------------------------------------------- - -seq=`basename $0` -seqres=$RESULT_DIR/$seq -echo "QA output created by $seq" - -here=`pwd` -tmp=/tmp/$$ -status=1 # failure is the default! -trap "_cleanup; exit \$status" 0 1 2 3 15 - -_cleanup() -{ - cd / - rm -rf $tmp.* -} - -# get standard environment, filters and checks -. ./common/rc -. ./common/filter -. ./common/reflink - -# real QA test starts here -_supported_os Linux -_supported_fs xfs -_require_scratch_reflink - -rm -f $seqres.full - -echo "Format" -_scratch_mkfs > $seqres.full 2>&1 -_scratch_mount >> $seqres.full -is_rmap=$(xfs_info $SCRATCH_MNT | grep -c "rmapbt=1") -umount $SCRATCH_MNT - -_get_agf_data() { - field="$1" - shift - - xfs_db -c 'agf 1' "$@" -c "p $field" $SCRATCH_DEV | awk '{print $3}' -} - -_set_agf_data() { - field="$1" - value="$2" - shift; shift - - xfs_db -x -c 'agf 1' "$@" -c "write $field -- $value" $SCRATCH_DEV >> $seqres.full -} - -_get_sb_data() { - field="$1" - shift - - xfs_db -c 'sb 0' "$@" -c "p $field" $SCRATCH_DEV | awk '{print $3}' -} - -_set_sb_data() { - field="$1" - value="$2" - shift; shift - - xfs_db -x -c 'sb 0' "$@" -c "write $field -- $value" $SCRATCH_DEV >> $seqres.full -} - -_filter_leftover() { - grep "^leftover" | sed -e "s/[0-9]\+/NR/g" -} - -_dump_status() { - echo "** " "$@" - xfs_db -c 'sb 0' -c p $SCRATCH_DEV - echo "** agf header" - xfs_db -c 'agf 1' -c p $SCRATCH_DEV - echo "** refcntbt" - xfs_db -c 'agf 1' -c 'addr refcntroot' -c p $SCRATCH_DEV - echo "** rmapbt" - test $is_rmap -gt 0 && xfs_db -c 'agf 1' -c 'addr rmaproot' -c p $SCRATCH_DEV - echo "** bnobt" - xfs_db -c 'agf 1' -c 'addr bnoroot' -c p $SCRATCH_DEV - echo "** cntbt" - xfs_db -c 'agf 1' -c 'addr cntroot' -c p $SCRATCH_DEV -} - -echo "We need AG1 to have a single free extent" -bno_lvl=$(_get_agf_data level -c 'addr bnoroot') -bno_nr=$(_get_agf_data numrecs -c 'addr bnoroot') -refc_lvl=$(_get_agf_data level -c 'addr refcntroot') -refc_nr=$(_get_agf_data numrecs -c 'addr refcntroot') - -test $bno_lvl -eq 0 || echo " AG 1 bnobt must only have one level" -test $bno_nr -eq 1 || echo " AG 1 bnobt must only have one record" -test $refc_lvl -eq 0 || echo " AG 1 refcountbt must only have one level" -test $refc_nr -eq 0 || echo " AG 1 refcountbt must only have one record" - -if [ $is_rmap -gt 0 ]; then - rmap_lvl=$(_get_agf_data level -c 'addr rmaproot') - rmap_nr=$(_get_agf_data numrecs -c 'addr rmaproot') - test $rmap_lvl -eq 0 || echo " AG 1 rmapbt must only have one level" -fi - -echo "Find our extent and old counter values" -bno=$(_get_agf_data "recs[1].startblock" -c 'addr bnoroot') -len=$(_get_agf_data "recs[1].blockcount" -c 'addr bnoroot') -agf_freeblks=$(_get_agf_data freeblks) -sb_fdblocks=$(_get_sb_data fdblocks) - -test $len -ge 200 || echo " AG 1 doesn't have enough free blocks" - -# Take the last 100 blocks of the free extent -debris_len=100 -debris_bno=$((bno + len - debris_len)) - -echo "Remove the extent from the freesp btrees" -_set_agf_data "recs[1].blockcount" $((len - debris_len)) -c 'addr bnoroot' -_set_agf_data "recs[1].blockcount" $((len - debris_len)) -c 'addr cntroot' -_set_agf_data freeblks $((agf_freeblks - debris_len)) -_set_agf_data longest $((len - debris_len)) -_set_sb_data fdblocks $((sb_fdblocks - debris_len)) - -echo "Add the extent to the refcount btree" -_set_agf_data numrecs 1 -c 'addr refcntroot' -_set_agf_data "recs[1].startblock" $debris_bno -c 'addr refcntroot' -_set_agf_data "recs[1].blockcount" $debris_len -c 'addr refcntroot' -_set_agf_data "recs[1].refcount" 1 -c 'addr refcntroot' - -if [ $is_rmap -gt 0 ]; then - rmap_nr=$((rmap_nr + 1)) - _set_agf_data numrecs $rmap_nr -c 'addr rmaproot' - _set_agf_data "recs[$rmap_nr].startblock" $debris_bno -c 'addr rmaproot' - _set_agf_data "recs[$rmap_nr].blockcount" $debris_len -c 'addr rmaproot' - _set_agf_data "recs[$rmap_nr].owner" -9 -c 'addr rmaproot' - _set_agf_data "recs[$rmap_nr].offset" 0 -c 'addr rmaproot' -fi - -_dump_status "broken fs config" >> $seqres.full - -echo "Look for leftover warning in xfs_check" -_scratch_xfs_check | _filter_leftover - -echo "Look for leftover warning in xfs_repair" -_scratch_xfs_repair -n 2>&1 | _filter_leftover - -echo "Fix filesystem" -_scratch_xfs_repair >> $seqres.full 2>&1 || echo "xfs_repair failed?" - -_dump_status "supposedly fixed fs config" >> $seqres.full - -echo "Look for no more leftover warning in xfs_check" -_scratch_xfs_check | _filter_leftover - -echo "Look for no more leftover warning in xfs_repair" -_scratch_xfs_repair -n 2>&1 | _filter_leftover - -# success, all done -status=0 -exit diff --git a/tests/xfs/263.out b/tests/xfs/263.out deleted file mode 100644 index bc3eea9..0000000 --- a/tests/xfs/263.out +++ /dev/null @@ -1,13 +0,0 @@ -QA output created by 263 -Format -We need AG1 to have a single free extent -Find our extent and old counter values -Remove the extent from the freesp btrees -Add the extent to the refcount btree -Look for leftover warning in xfs_check -leftover CoW extent (NR/NR) len NR -Look for leftover warning in xfs_repair -leftover CoW extent (NR/NR) len NR -Fix filesystem -Look for no more leftover warning in xfs_check -Look for no more leftover warning in xfs_repair diff --git a/tests/xfs/264 b/tests/xfs/264 deleted file mode 100755 index 190361d..0000000 --- a/tests/xfs/264 +++ /dev/null @@ -1,180 +0,0 @@ -#! /bin/bash -# FS QA Test No. 264 -# -# Test recovery of "lost" CoW blocks: -# - Use the debugger to fake a leftover CoW extent -# - See if mount/umount fixes it -# -#----------------------------------------------------------------------- -# Copyright (c) 2016, Oracle and/or its affiliates. All Rights Reserved. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation. -# -# This program is distributed in the hope that it would be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write the Free Software Foundation, -# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -#----------------------------------------------------------------------- - -seq=`basename $0` -seqres=$RESULT_DIR/$seq -echo "QA output created by $seq" - -here=`pwd` -tmp=/tmp/$$ -status=1 # failure is the default! -trap "_cleanup; exit \$status" 0 1 2 3 15 - -_cleanup() -{ - cd / - rm -rf $tmp.* -} - -# get standard environment, filters and checks -. ./common/rc -. ./common/filter -. ./common/reflink - -# real QA test starts here -_supported_os Linux -_supported_fs xfs -_require_scratch_reflink - -rm -f $seqres.full - -echo "Format" -_scratch_mkfs > $seqres.full 2>&1 -_scratch_mount >> $seqres.full -is_rmap=$(xfs_info $SCRATCH_MNT | grep -c "rmapbt=1") -umount $SCRATCH_MNT - -_get_agf_data() { - field="$1" - shift - - xfs_db -c 'agf 1' "$@" -c "p $field" $SCRATCH_DEV | awk '{print $3}' -} - -_set_agf_data() { - field="$1" - value="$2" - shift; shift - - xfs_db -x -c 'agf 1' "$@" -c "write $field -- $value" $SCRATCH_DEV >> $seqres.full -} - -_get_sb_data() { - field="$1" - shift - - xfs_db -c 'sb 0' "$@" -c "p $field" $SCRATCH_DEV | awk '{print $3}' -} - -_set_sb_data() { - field="$1" - value="$2" - shift; shift - - xfs_db -x -c 'sb 0' "$@" -c "write $field -- $value" $SCRATCH_DEV >> $seqres.full -} - -_filter_leftover() { - grep "^leftover" | sed -e "s/[0-9]\+/NR/g" -} - -_dump_status() { - echo "** " "$@" - xfs_db -c 'sb 0' -c p $SCRATCH_DEV - echo "** agf header" - xfs_db -c 'agf 1' -c p $SCRATCH_DEV - echo "** refcntbt" - xfs_db -c 'agf 1' -c 'addr refcntroot' -c p $SCRATCH_DEV - echo "** rmapbt" - test $is_rmap -gt 0 && xfs_db -c 'agf 1' -c 'addr rmaproot' -c p $SCRATCH_DEV - echo "** bnobt" - xfs_db -c 'agf 1' -c 'addr bnoroot' -c p $SCRATCH_DEV - echo "** cntbt" - xfs_db -c 'agf 1' -c 'addr cntroot' -c p $SCRATCH_DEV -} - -echo "We need AG1 to have a single free extent" -bno_lvl=$(_get_agf_data level -c 'addr bnoroot') -bno_nr=$(_get_agf_data numrecs -c 'addr bnoroot') -refc_lvl=$(_get_agf_data level -c 'addr refcntroot') -refc_nr=$(_get_agf_data numrecs -c 'addr refcntroot') - -test $bno_lvl -eq 0 || echo " AG 1 bnobt must only have one level" -test $bno_nr -eq 1 || echo " AG 1 bnobt must only have one record" -test $refc_lvl -eq 0 || echo " AG 1 refcountbt must only have one level" -test $refc_nr -eq 0 || echo " AG 1 refcountbt must only have one record" - -if [ $is_rmap -gt 0 ]; then - rmap_lvl=$(_get_agf_data level -c 'addr rmaproot') - rmap_nr=$(_get_agf_data numrecs -c 'addr rmaproot') - test $rmap_lvl -eq 0 || echo " AG 1 rmapbt must only have one level" -fi - -echo "Find our extent and old counter values" -bno=$(_get_agf_data "recs[1].startblock" -c 'addr bnoroot') -len=$(_get_agf_data "recs[1].blockcount" -c 'addr bnoroot') -agf_freeblks=$(_get_agf_data freeblks) -sb_fdblocks=$(_get_sb_data fdblocks) - -test $len -ge 200 || echo " AG 1 doesn't have enough free blocks" - -# Take the last 100 blocks of the free extent -debris_len=100 -debris_bno=$((bno + len - debris_len)) - -echo "Remove the extent from the freesp btrees" -_set_agf_data "recs[1].blockcount" $((len - debris_len)) -c 'addr bnoroot' -_set_agf_data "recs[1].blockcount" $((len - debris_len)) -c 'addr cntroot' -_set_agf_data freeblks $((agf_freeblks - debris_len)) -_set_agf_data longest $((len - debris_len)) -_set_sb_data fdblocks $((sb_fdblocks - debris_len)) - -echo "Add the extent to the refcount btree" -_set_agf_data numrecs 1 -c 'addr refcntroot' -_set_agf_data "recs[1].startblock" $debris_bno -c 'addr refcntroot' -_set_agf_data "recs[1].blockcount" $debris_len -c 'addr refcntroot' -_set_agf_data "recs[1].refcount" 1 -c 'addr refcntroot' - -if [ $is_rmap -gt 0 ]; then - rmap_nr=$((rmap_nr + 1)) - _set_agf_data numrecs $rmap_nr -c 'addr rmaproot' - _set_agf_data "recs[$rmap_nr].startblock" $debris_bno -c 'addr rmaproot' - _set_agf_data "recs[$rmap_nr].blockcount" $debris_len -c 'addr rmaproot' - _set_agf_data "recs[$rmap_nr].owner" -9 -c 'addr rmaproot' - _set_agf_data "recs[$rmap_nr].offset" 0 -c 'addr rmaproot' -fi - -_dump_status "broken fs config" >> $seqres.full - -echo "Look for leftover warning in xfs_check" -_scratch_xfs_check | _filter_leftover - -echo "Look for leftover warning in xfs_repair" -_scratch_xfs_repair -n 2>&1 | _filter_leftover - -echo "Mount filesystem" -_scratch_mount -umount $SCRATCH_MNT - -_dump_status "supposedly fixed fs config" >> $seqres.full - -echo "Look for no more leftover warning in xfs_check" -_scratch_xfs_check | _filter_leftover - -echo "Look for no more leftover warning in xfs_repair" -_scratch_xfs_repair -n 2>&1 | _filter_leftover - -# success, all done -status=0 -exit diff --git a/tests/xfs/264.out b/tests/xfs/264.out deleted file mode 100644 index 3faaf42..0000000 --- a/tests/xfs/264.out +++ /dev/null @@ -1,13 +0,0 @@ -QA output created by 264 -Format -We need AG1 to have a single free extent -Find our extent and old counter values -Remove the extent from the freesp btrees -Add the extent to the refcount btree -Look for leftover warning in xfs_check -leftover CoW extent (NR/NR) len NR -Look for leftover warning in xfs_repair -leftover CoW extent (NR/NR) len NR -Mount filesystem -Look for no more leftover warning in xfs_check -Look for no more leftover warning in xfs_repair diff --git a/tests/xfs/group b/tests/xfs/group index 9f8ca0f..aa3b3ec 100644 --- a/tests/xfs/group +++ b/tests/xfs/group @@ -259,8 +259,6 @@ 260 auto quick quota 261 auto quick quota 262 auto quick quota -263 auto quick clone -264 auto quick clone 265 auto clone 266 dump ioctl auto quick 267 dump ioctl tape _______________________________________________ xfs mailing list xfs@oss.sgi.com http://oss.sgi.com/mailman/listinfo/xfs
next prev parent reply other threads:[~2016-07-21 23:46 UTC|newest] Thread overview: 112+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-07-21 23:46 [PATCH v7 00/17] xfstests: fixes and new tests for rmap/reflink/etc Darrick J. Wong 2016-07-21 23:46 ` Darrick J. Wong 2016-07-21 23:46 ` Darrick J. Wong [this message] 2016-07-21 23:46 ` [PATCH 01/17] xfs/26[34]: remove duplicate tests Darrick J. Wong 2016-08-01 6:25 ` Christoph Hellwig 2016-08-01 6:25 ` Christoph Hellwig 2016-07-21 23:46 ` [PATCH 02/17] xfs: use rmapbt-checking helper Darrick J. Wong 2016-07-21 23:46 ` Darrick J. Wong 2016-08-01 6:25 ` Christoph Hellwig 2016-08-01 6:25 ` Christoph Hellwig 2016-07-21 23:46 ` [PATCH 03/17] xfs/310: fix the size calculation for the huge device Darrick J. Wong 2016-07-21 23:46 ` Darrick J. Wong 2016-08-01 6:25 ` Christoph Hellwig 2016-08-01 6:25 ` Christoph Hellwig 2016-07-21 23:46 ` [PATCH 04/17] xfs/122: list the new log redo items Darrick J. Wong 2016-07-21 23:46 ` Darrick J. Wong 2016-08-01 6:26 ` Christoph Hellwig 2016-08-01 6:26 ` Christoph Hellwig 2016-07-21 23:46 ` [PATCH 05/17] common/reflink: actually test dedupe on scratch device Darrick J. Wong 2016-07-21 23:46 ` Darrick J. Wong 2016-08-01 6:26 ` Christoph Hellwig 2016-08-01 6:26 ` Christoph Hellwig 2016-07-21 23:46 ` [PATCH 06/17] xfs: run xfs_repair at the end of each test Darrick J. Wong 2016-07-21 23:46 ` Darrick J. Wong 2016-08-01 6:27 ` Christoph Hellwig 2016-08-01 6:27 ` Christoph Hellwig 2016-08-01 17:08 ` Darrick J. Wong 2016-08-01 17:08 ` Darrick J. Wong 2016-08-02 12:24 ` Christoph Hellwig 2016-08-02 12:24 ` Christoph Hellwig 2016-08-03 9:15 ` Eryu Guan 2016-08-03 9:15 ` Eryu Guan 2016-08-03 22:08 ` Darrick J. Wong 2016-08-03 22:08 ` Darrick J. Wong 2016-08-03 22:45 ` [PATCH v2 06/17] xfs: optionally test xfs_repair index rebuilding " Darrick J. Wong 2016-08-03 22:45 ` Darrick J. Wong 2016-07-21 23:47 ` [PATCH 07/17] xfs/128: cycle_mount the scratch device, not the test device Darrick J. Wong 2016-07-21 23:47 ` Darrick J. Wong 2016-08-01 6:27 ` Christoph Hellwig 2016-08-01 6:27 ` Christoph Hellwig 2016-08-03 9:37 ` Eryu Guan 2016-08-03 9:37 ` Eryu Guan 2016-08-03 22:09 ` Darrick J. Wong 2016-08-03 22:09 ` Darrick J. Wong 2016-08-03 22:48 ` [PATCH v2 " Darrick J. Wong 2016-08-03 22:48 ` Darrick J. Wong 2016-07-21 23:47 ` [PATCH 08/17] xfs/129: fix post-metadump remounting idiocy Darrick J. Wong 2016-07-21 23:47 ` Darrick J. Wong 2016-08-01 6:27 ` Christoph Hellwig 2016-08-01 6:27 ` Christoph Hellwig 2016-07-21 23:47 ` [PATCH 09/17] common/dmerror: fix mount option issues Darrick J. Wong 2016-07-21 23:47 ` Darrick J. Wong 2016-08-01 6:28 ` Christoph Hellwig 2016-08-01 6:28 ` Christoph Hellwig 2016-08-03 10:38 ` Eryu Guan 2016-08-03 10:38 ` Eryu Guan 2016-08-03 22:14 ` Darrick J. Wong 2016-08-03 22:14 ` Darrick J. Wong 2016-08-03 22:50 ` [PATCH v2 " Darrick J. Wong 2016-08-03 22:50 ` Darrick J. Wong 2016-08-04 0:33 ` Darrick J. Wong 2016-08-04 0:33 ` Darrick J. Wong 2016-08-04 0:34 ` [PATCH v3 " Darrick J. Wong 2016-08-04 0:34 ` Darrick J. Wong 2016-07-21 23:47 ` [PATCH 10/17] xfs/179: use scratch device helpers Darrick J. Wong 2016-07-21 23:47 ` Darrick J. Wong 2016-08-01 6:28 ` Christoph Hellwig 2016-08-01 6:28 ` Christoph Hellwig 2016-07-21 23:47 ` [PATCH 11/17] xfs/234: " Darrick J. Wong 2016-07-21 23:47 ` Darrick J. Wong 2016-08-01 6:29 ` Christoph Hellwig 2016-08-01 6:29 ` Christoph Hellwig 2016-07-21 23:47 ` [PATCH 12/17] reflink: test cross-mountpoint reflink and dedupe Darrick J. Wong 2016-07-21 23:47 ` Darrick J. Wong 2016-08-01 6:29 ` Christoph Hellwig 2016-08-01 6:29 ` Christoph Hellwig 2016-08-08 7:56 ` Eryu Guan 2016-08-08 7:56 ` Eryu Guan 2016-08-08 17:28 ` Darrick J. Wong 2016-08-08 17:28 ` Darrick J. Wong 2016-07-21 23:47 ` [PATCH 13/17] xfs: test swapext with reflink Darrick J. Wong 2016-07-21 23:47 ` Darrick J. Wong 2016-08-08 8:13 ` Eryu Guan 2016-08-08 8:13 ` Eryu Guan 2016-08-08 17:41 ` Darrick J. Wong 2016-08-08 17:41 ` Darrick J. Wong 2016-08-09 6:29 ` Dave Chinner 2016-08-09 6:29 ` Dave Chinner 2016-08-19 21:53 ` Darrick J. Wong 2016-08-19 21:53 ` Darrick J. Wong 2016-07-21 23:47 ` [PATCH 14/17] xfs: more rmapbt tests Darrick J. Wong 2016-07-21 23:47 ` Darrick J. Wong 2016-08-08 8:48 ` Eryu Guan 2016-08-08 8:48 ` Eryu Guan 2016-08-08 17:59 ` Darrick J. Wong 2016-08-08 17:59 ` Darrick J. Wong 2016-07-21 23:47 ` [PATCH 15/17] xfs: scrub fs (if still mounted) at the end of the test Darrick J. Wong 2016-07-21 23:47 ` Darrick J. Wong 2016-08-08 8:52 ` Eryu Guan 2016-08-08 8:52 ` Eryu Guan 2016-08-08 18:03 ` Darrick J. Wong 2016-08-08 18:03 ` Darrick J. Wong 2016-07-21 23:48 ` [PATCH 16/17] xfs/122: add the realtime rmapbt inode and btree fields Darrick J. Wong 2016-07-21 23:48 ` Darrick J. Wong 2016-08-01 6:30 ` Christoph Hellwig 2016-08-01 6:30 ` Christoph Hellwig 2016-07-21 23:48 ` [PATCH 17/17] xfs: test realtime rmapbt code Darrick J. Wong 2016-07-21 23:48 ` Darrick J. Wong 2016-08-08 9:08 ` Eryu Guan 2016-08-08 9:08 ` Eryu Guan 2016-08-08 18:18 ` Darrick J. Wong 2016-08-08 18:18 ` Darrick J. Wong
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=146914478187.11762.1309628175021637188.stgit@birch.djwong.org \ --to=darrick.wong@oracle.com \ --cc=david@fromorbit.com \ --cc=eguan@redhat.com \ --cc=fstests@vger.kernel.org \ --cc=linux-btrfs@vger.kernel.org \ --cc=xfs@oss.sgi.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.