From: Loic Pallardy <loic.pallardy@st.com> To: bjorn.andersson@linaro.org, ohad@wizery.com, lee.jones@linaro.org Cc: loic.pallardy@st.com, linux-remoteproc@vger.kernel.org, linux-kernel@vger.kernel.org, kernel@stlinux.com, patrice.chotard@st.com, hugues.fruchet@st.com, peter.griffin@linaro.org Subject: [PATCH v3 1/4] remoteproc: st: correct probe error management Date: Tue, 31 Jan 2017 13:35:53 +0100 [thread overview] Message-ID: <1485866156-6364-2-git-send-email-loic.pallardy@st.com> (raw) In-Reply-To: <1485866156-6364-1-git-send-email-loic.pallardy@st.com> Associated clock is prepared in st_rproc_parse_dt function. it should be unprepared in case of error during probing. Signed-off-by: Loic Pallardy <loic.pallardy@st.com> --- Changes from V2: New patch fixing st_rproc_probe error management drivers/remoteproc/st_remoteproc.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/remoteproc/st_remoteproc.c b/drivers/remoteproc/st_remoteproc.c index da4e152..bdfab49 100644 --- a/drivers/remoteproc/st_remoteproc.c +++ b/drivers/remoteproc/st_remoteproc.c @@ -247,7 +247,7 @@ static int st_rproc_probe(struct platform_device *pdev) enabled = st_rproc_state(pdev); if (enabled < 0) { ret = enabled; - goto free_rproc; + goto free_clk; } if (enabled) { @@ -259,10 +259,12 @@ static int st_rproc_probe(struct platform_device *pdev) ret = rproc_add(rproc); if (ret) - goto free_rproc; + goto free_clk; return 0; +free_clk: + clk_unprepare(ddata->clk); free_rproc: rproc_free(rproc); return ret; -- 1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: Loic Pallardy <loic.pallardy@st.com> To: <bjorn.andersson@linaro.org>, <ohad@wizery.com>, <lee.jones@linaro.org> Cc: <loic.pallardy@st.com>, <linux-remoteproc@vger.kernel.org>, <linux-kernel@vger.kernel.org>, <kernel@stlinux.com>, <patrice.chotard@st.com>, <hugues.fruchet@st.com>, <peter.griffin@linaro.org> Subject: [PATCH v3 1/4] remoteproc: st: correct probe error management Date: Tue, 31 Jan 2017 13:35:53 +0100 [thread overview] Message-ID: <1485866156-6364-2-git-send-email-loic.pallardy@st.com> (raw) In-Reply-To: <1485866156-6364-1-git-send-email-loic.pallardy@st.com> Associated clock is prepared in st_rproc_parse_dt function. it should be unprepared in case of error during probing. Signed-off-by: Loic Pallardy <loic.pallardy@st.com> --- Changes from V2: New patch fixing st_rproc_probe error management drivers/remoteproc/st_remoteproc.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/remoteproc/st_remoteproc.c b/drivers/remoteproc/st_remoteproc.c index da4e152..bdfab49 100644 --- a/drivers/remoteproc/st_remoteproc.c +++ b/drivers/remoteproc/st_remoteproc.c @@ -247,7 +247,7 @@ static int st_rproc_probe(struct platform_device *pdev) enabled = st_rproc_state(pdev); if (enabled < 0) { ret = enabled; - goto free_rproc; + goto free_clk; } if (enabled) { @@ -259,10 +259,12 @@ static int st_rproc_probe(struct platform_device *pdev) ret = rproc_add(rproc); if (ret) - goto free_rproc; + goto free_clk; return 0; +free_clk: + clk_unprepare(ddata->clk); free_rproc: rproc_free(rproc); return ret; -- 1.9.1
next prev parent reply other threads:[~2017-01-31 12:35 UTC|newest] Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top 2017-01-31 12:35 [PATCH v3 0/4] remoteproc: st: add virtio_rpmsg support Loic Pallardy 2017-01-31 12:35 ` Loic Pallardy 2017-01-31 12:35 ` Loic Pallardy [this message] 2017-01-31 12:35 ` [PATCH v3 1/4] remoteproc: st: correct probe error management Loic Pallardy 2017-02-06 21:19 ` Bjorn Andersson 2017-02-07 22:20 ` Loic PALLARDY 2017-01-31 12:35 ` [PATCH v3 2/4] remoteproc: st: add virtio communication support Loic Pallardy 2017-01-31 12:35 ` Loic Pallardy 2017-01-31 12:35 ` [PATCH v3 3/4] remoteproc: st: add da to va support Loic Pallardy 2017-01-31 12:35 ` Loic Pallardy 2017-02-08 9:00 ` [v3,3/4] " Hugues FRUCHET 2017-01-31 12:35 ` [PATCH v3 4/4] remoteproc: core: don't allocate carveout if pa or da are defined Loic Pallardy 2017-01-31 12:35 ` Loic Pallardy 2017-02-08 9:00 ` [v3, " Hugues FRUCHET 2017-02-09 1:55 ` [PATCH v3 " Bjorn Andersson 2017-02-09 21:34 ` Loic PALLARDY
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1485866156-6364-2-git-send-email-loic.pallardy@st.com \ --to=loic.pallardy@st.com \ --cc=bjorn.andersson@linaro.org \ --cc=hugues.fruchet@st.com \ --cc=kernel@stlinux.com \ --cc=lee.jones@linaro.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-remoteproc@vger.kernel.org \ --cc=ohad@wizery.com \ --cc=patrice.chotard@st.com \ --cc=peter.griffin@linaro.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.