From: Erik Stromdahl <erik.stromdahl@gmail.com> To: kvalo@qca.qualcomm.com, linux-wireless@vger.kernel.org, ath10k@lists.infradead.org Cc: Erik Stromdahl <erik.stromdahl@gmail.com> Subject: [RFC v4 03/21] ath10k: htc: move htc ctrl ep connect to htc_init Date: Tue, 21 Feb 2017 17:15:23 +0100 [thread overview] Message-ID: <1487693741-10042-4-git-send-email-erik.stromdahl@gmail.com> (raw) In-Reply-To: <1487693741-10042-1-git-send-email-erik.stromdahl@gmail.com> This patch moves the HTC ctrl service connect from htc_wait_target to htc_init. This is done in order to make sure the htc ctrl service is setup properly before hif_start is called. The reason for this is that we want the HTC ctrl service callback to be initialized before the target sends the HTC ready message. The ready message will always be transmitted on endpoint 0 (which is always assigned to the HTC control service) so it makes more sense if HTC control has been connected before the ready message is received. Since the service to pipe mapping is done as a part of the service connect, the get_default_pipe call is redundant and was removed. Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com> --- drivers/net/wireless/ath/ath10k/htc.c | 39 +++++++++++++++-------------------- 1 file changed, 17 insertions(+), 22 deletions(-) diff --git a/drivers/net/wireless/ath/ath10k/htc.c b/drivers/net/wireless/ath/ath10k/htc.c index e72f385..f39eef6 100644 --- a/drivers/net/wireless/ath/ath10k/htc.c +++ b/drivers/net/wireless/ath/ath10k/htc.c @@ -584,8 +584,6 @@ int ath10k_htc_wait_target(struct ath10k_htc *htc) struct ath10k *ar = htc->ar; int i, status = 0; unsigned long time_left; - struct ath10k_htc_svc_conn_req conn_req; - struct ath10k_htc_svc_conn_resp conn_resp; struct ath10k_htc_msg *msg; u16 message_id; u16 credit_count; @@ -648,22 +646,6 @@ int ath10k_htc_wait_target(struct ath10k_htc *htc) return -ECOMM; } - /* setup our pseudo HTC control endpoint connection */ - memset(&conn_req, 0, sizeof(conn_req)); - memset(&conn_resp, 0, sizeof(conn_resp)); - conn_req.ep_ops.ep_tx_complete = ath10k_htc_control_tx_complete; - conn_req.ep_ops.ep_rx_complete = ath10k_htc_control_rx_complete; - conn_req.max_send_queue_depth = ATH10K_NUM_CONTROL_TX_BUFFERS; - conn_req.service_id = ATH10K_HTC_SVC_ID_RSVD_CTRL; - - /* connect fake service */ - status = ath10k_htc_connect_service(htc, &conn_req, &conn_resp); - if (status) { - ath10k_err(ar, "could not connect to htc service (%d)\n", - status); - return status; - } - return 0; } @@ -873,8 +855,10 @@ int ath10k_htc_start(struct ath10k_htc *htc) /* registered target arrival callback from the HIF layer */ int ath10k_htc_init(struct ath10k *ar) { - struct ath10k_htc_ep *ep = NULL; + int status; struct ath10k_htc *htc = &ar->htc; + struct ath10k_htc_svc_conn_req conn_req; + struct ath10k_htc_svc_conn_resp conn_resp; spin_lock_init(&htc->tx_lock); @@ -882,10 +866,21 @@ int ath10k_htc_init(struct ath10k *ar) htc->ar = ar; - /* Get HIF default pipe for HTC message exchange */ - ep = &htc->endpoint[ATH10K_HTC_EP_0]; + /* setup our pseudo HTC control endpoint connection */ + memset(&conn_req, 0, sizeof(conn_req)); + memset(&conn_resp, 0, sizeof(conn_resp)); + conn_req.ep_ops.ep_tx_complete = ath10k_htc_control_tx_complete; + conn_req.ep_ops.ep_rx_complete = ath10k_htc_control_rx_complete; + conn_req.max_send_queue_depth = ATH10K_NUM_CONTROL_TX_BUFFERS; + conn_req.service_id = ATH10K_HTC_SVC_ID_RSVD_CTRL; - ath10k_hif_get_default_pipe(ar, &ep->ul_pipe_id, &ep->dl_pipe_id); + /* connect fake service */ + status = ath10k_htc_connect_service(htc, &conn_req, &conn_resp); + if (status) { + ath10k_err(ar, "could not connect to htc service (%d)\n", + status); + return status; + } init_completion(&htc->ctl_resp); -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Erik Stromdahl <erik.stromdahl@gmail.com> To: kvalo@qca.qualcomm.com, linux-wireless@vger.kernel.org, ath10k@lists.infradead.org Cc: Erik Stromdahl <erik.stromdahl@gmail.com> Subject: [RFC v4 03/21] ath10k: htc: move htc ctrl ep connect to htc_init Date: Tue, 21 Feb 2017 17:15:23 +0100 [thread overview] Message-ID: <1487693741-10042-4-git-send-email-erik.stromdahl@gmail.com> (raw) In-Reply-To: <1487693741-10042-1-git-send-email-erik.stromdahl@gmail.com> This patch moves the HTC ctrl service connect from htc_wait_target to htc_init. This is done in order to make sure the htc ctrl service is setup properly before hif_start is called. The reason for this is that we want the HTC ctrl service callback to be initialized before the target sends the HTC ready message. The ready message will always be transmitted on endpoint 0 (which is always assigned to the HTC control service) so it makes more sense if HTC control has been connected before the ready message is received. Since the service to pipe mapping is done as a part of the service connect, the get_default_pipe call is redundant and was removed. Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com> --- drivers/net/wireless/ath/ath10k/htc.c | 39 +++++++++++++++-------------------- 1 file changed, 17 insertions(+), 22 deletions(-) diff --git a/drivers/net/wireless/ath/ath10k/htc.c b/drivers/net/wireless/ath/ath10k/htc.c index e72f385..f39eef6 100644 --- a/drivers/net/wireless/ath/ath10k/htc.c +++ b/drivers/net/wireless/ath/ath10k/htc.c @@ -584,8 +584,6 @@ int ath10k_htc_wait_target(struct ath10k_htc *htc) struct ath10k *ar = htc->ar; int i, status = 0; unsigned long time_left; - struct ath10k_htc_svc_conn_req conn_req; - struct ath10k_htc_svc_conn_resp conn_resp; struct ath10k_htc_msg *msg; u16 message_id; u16 credit_count; @@ -648,22 +646,6 @@ int ath10k_htc_wait_target(struct ath10k_htc *htc) return -ECOMM; } - /* setup our pseudo HTC control endpoint connection */ - memset(&conn_req, 0, sizeof(conn_req)); - memset(&conn_resp, 0, sizeof(conn_resp)); - conn_req.ep_ops.ep_tx_complete = ath10k_htc_control_tx_complete; - conn_req.ep_ops.ep_rx_complete = ath10k_htc_control_rx_complete; - conn_req.max_send_queue_depth = ATH10K_NUM_CONTROL_TX_BUFFERS; - conn_req.service_id = ATH10K_HTC_SVC_ID_RSVD_CTRL; - - /* connect fake service */ - status = ath10k_htc_connect_service(htc, &conn_req, &conn_resp); - if (status) { - ath10k_err(ar, "could not connect to htc service (%d)\n", - status); - return status; - } - return 0; } @@ -873,8 +855,10 @@ int ath10k_htc_start(struct ath10k_htc *htc) /* registered target arrival callback from the HIF layer */ int ath10k_htc_init(struct ath10k *ar) { - struct ath10k_htc_ep *ep = NULL; + int status; struct ath10k_htc *htc = &ar->htc; + struct ath10k_htc_svc_conn_req conn_req; + struct ath10k_htc_svc_conn_resp conn_resp; spin_lock_init(&htc->tx_lock); @@ -882,10 +866,21 @@ int ath10k_htc_init(struct ath10k *ar) htc->ar = ar; - /* Get HIF default pipe for HTC message exchange */ - ep = &htc->endpoint[ATH10K_HTC_EP_0]; + /* setup our pseudo HTC control endpoint connection */ + memset(&conn_req, 0, sizeof(conn_req)); + memset(&conn_resp, 0, sizeof(conn_resp)); + conn_req.ep_ops.ep_tx_complete = ath10k_htc_control_tx_complete; + conn_req.ep_ops.ep_rx_complete = ath10k_htc_control_rx_complete; + conn_req.max_send_queue_depth = ATH10K_NUM_CONTROL_TX_BUFFERS; + conn_req.service_id = ATH10K_HTC_SVC_ID_RSVD_CTRL; - ath10k_hif_get_default_pipe(ar, &ep->ul_pipe_id, &ep->dl_pipe_id); + /* connect fake service */ + status = ath10k_htc_connect_service(htc, &conn_req, &conn_resp); + if (status) { + ath10k_err(ar, "could not connect to htc service (%d)\n", + status); + return status; + } init_completion(&htc->ctl_resp); -- 2.7.4 _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k
next prev parent reply other threads:[~2017-02-21 16:16 UTC|newest] Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top 2017-02-21 16:15 [RFC v4 00/21] ath10k sdio and usb support Erik Stromdahl 2017-02-21 16:15 ` Erik Stromdahl 2017-02-21 16:15 ` [RFC v4 01/21] ath10k: htc: made static function public Erik Stromdahl 2017-02-21 16:15 ` Erik Stromdahl 2017-02-21 16:15 ` [RFC v4 02/21] ath10k: htc: rx trailer lookahead support Erik Stromdahl 2017-02-21 16:15 ` Erik Stromdahl 2017-02-21 16:15 ` Erik Stromdahl [this message] 2017-02-21 16:15 ` [RFC v4 03/21] ath10k: htc: move htc ctrl ep connect to htc_init Erik Stromdahl 2017-02-21 16:15 ` [RFC v4 04/21] ath10k: htc: refactorization Erik Stromdahl 2017-02-21 16:15 ` Erik Stromdahl 2017-02-21 16:15 ` [RFC v4 05/21] ath10k: various sdio related definitions Erik Stromdahl 2017-02-21 16:15 ` Erik Stromdahl 2017-02-21 16:15 ` [RFC v4 06/21] ath10k: sdio support Erik Stromdahl 2017-02-21 16:15 ` Erik Stromdahl 2017-03-10 12:11 ` Valo, Kalle 2017-03-10 12:11 ` Valo, Kalle 2017-03-10 12:43 ` Valo, Kalle 2017-03-10 12:43 ` Valo, Kalle 2017-03-10 16:29 ` Erik Stromdahl 2017-03-10 16:29 ` Erik Stromdahl 2017-03-11 10:36 ` Erik Stromdahl 2017-03-11 10:36 ` Erik Stromdahl 2017-03-11 15:04 ` Kalle Valo 2017-03-11 15:04 ` Kalle Valo 2017-03-11 19:10 ` Erik Stromdahl 2017-03-11 19:10 ` Erik Stromdahl 2017-03-15 12:09 ` Kalle Valo 2017-03-15 12:09 ` Kalle Valo 2017-03-15 18:01 ` Erik Stromdahl 2017-03-15 18:01 ` Erik Stromdahl 2017-03-16 9:33 ` Kalle Valo 2017-03-16 9:33 ` Kalle Valo 2017-03-17 15:54 ` Erik Stromdahl 2017-03-17 15:54 ` Erik Stromdahl 2017-03-23 16:10 ` Kalle Valo 2017-03-23 16:10 ` Kalle Valo 2017-02-21 16:15 ` [RFC v4 07/21] ath10k: add sdio extra initializations Erik Stromdahl 2017-02-21 16:15 ` Erik Stromdahl 2017-02-21 16:15 ` [RFC v4 08/21] ath10k: sdio get target info Erik Stromdahl 2017-02-21 16:15 ` Erik Stromdahl 2017-02-21 16:15 ` [RFC v4 09/21] ath10k: htc: ready_ext msg support Erik Stromdahl 2017-02-21 16:15 ` Erik Stromdahl 2017-02-21 16:15 ` [RFC v4 10/21] ath10k: various usb related definitions Erik Stromdahl 2017-02-21 16:15 ` Erik Stromdahl 2017-02-21 16:15 ` [RFC v4 11/21] ath10k: usb support Erik Stromdahl 2017-02-21 16:15 ` Erik Stromdahl 2017-02-21 16:15 ` [RFC v4 12/21] ath10k: high_latency detection Erik Stromdahl 2017-02-21 16:15 ` Erik Stromdahl 2017-02-21 16:15 ` [RFC v4 13/21] ath10k: different fw file names for usb and sdio Erik Stromdahl 2017-02-21 16:15 ` Erik Stromdahl 2017-02-21 16:15 ` [RFC v4 14/21] ath10k: htt: RX ring config HL support Erik Stromdahl 2017-02-21 16:15 ` Erik Stromdahl 2017-02-21 16:15 ` [RFC v4 15/21] ath10k: per target configurablity of various items Erik Stromdahl 2017-02-21 16:15 ` Erik Stromdahl 2017-02-21 16:15 ` [RFC v4 16/21] ath10k: add start_once support Erik Stromdahl 2017-02-21 16:15 ` Erik Stromdahl 2017-02-21 16:15 ` [RFC v4 17/21] ath10k: htt: High latency TX support Erik Stromdahl 2017-02-21 16:15 ` Erik Stromdahl 2017-02-21 16:15 ` [RFC v4 18/21] ath10k: htt: High latency RX support Erik Stromdahl 2017-02-21 16:15 ` Erik Stromdahl 2017-02-21 16:15 ` [RFC v4 19/21] ath10k: add QCA9377 usb hw_param item Erik Stromdahl 2017-02-21 16:15 ` Erik Stromdahl 2017-02-21 16:15 ` [RFC v4 20/21] ath10k: add QCA9377 sdio " Erik Stromdahl 2017-02-21 16:15 ` Erik Stromdahl 2017-02-21 16:15 ` [RFC v4 21/21] ath10k: dma fixes for high latency devices Erik Stromdahl 2017-02-21 16:15 ` Erik Stromdahl
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1487693741-10042-4-git-send-email-erik.stromdahl@gmail.com \ --to=erik.stromdahl@gmail.com \ --cc=ath10k@lists.infradead.org \ --cc=kvalo@qca.qualcomm.com \ --cc=linux-wireless@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.