All of lore.kernel.org
 help / color / mirror / Atom feed
From: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
To: <broonie@kernel.org>
Cc: <lgirdwood@gmail.com>, <lee.jones@linaro.org>,
	<robh+dt@kernel.org>, <mark.rutland@arm.com>,
	<devicetree@vger.kernel.org>, <alsa-devel@alsa-project.org>,
	<linux-kernel@vger.kernel.org>,
	<patches@opensource.wolfsonmicro.com>
Subject: [PATCH v2 4/8] regulator: helpers: Add regmap set_soft_start helper
Date: Tue, 28 Mar 2017 15:14:40 +0100	[thread overview]
Message-ID: <1490710484-25277-4-git-send-email-ckeepax@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <1490710484-25277-1-git-send-email-ckeepax@opensource.wolfsonmicro.com>

Add a helper function regulator_set_soft_start_regmap to allow regmap
based regulators to easily enable soft start.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
---

Changes since v1:
 - Added documentation for the new regulator_desc fields to the kernel doc.

 drivers/regulator/helpers.c      | 18 ++++++++++++++++++
 include/linux/regulator/driver.h |  8 ++++++++
 2 files changed, 26 insertions(+)

diff --git a/drivers/regulator/helpers.c b/drivers/regulator/helpers.c
index 379cdac..a75e7da 100644
--- a/drivers/regulator/helpers.c
+++ b/drivers/regulator/helpers.c
@@ -446,6 +446,24 @@ int regulator_set_bypass_regmap(struct regulator_dev *rdev, bool enable)
 EXPORT_SYMBOL_GPL(regulator_set_bypass_regmap);
 
 /**
+ * regulator_set_soft_start_regmap - Default set_soft_start() using regmap
+ *
+ * @rdev: device to operate on.
+ */
+int regulator_set_soft_start_regmap(struct regulator_dev *rdev)
+{
+	unsigned int val;
+
+	val = rdev->desc->soft_start_val_on;
+	if (!val)
+		val = rdev->desc->soft_start_mask;
+
+	return regmap_update_bits(rdev->regmap, rdev->desc->soft_start_reg,
+				  rdev->desc->soft_start_mask, val);
+}
+EXPORT_SYMBOL_GPL(regulator_set_soft_start_regmap);
+
+/**
  * regulator_get_bypass_regmap - Default get_bypass() using regmap
  *
  * @rdev: device to operate on.
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index dac8e7b1..1054c03 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -292,6 +292,10 @@ enum regulator_type {
  *			   set_active_discharge
  * @active_discharge_reg: Register for control when using regmap
  *			  set_active_discharge
+ * @soft_start_reg: Register for control when using regmap set_soft_start
+ * @soft_start_mask: Mask for control when using regmap set_soft_start
+ * @soft_start_val_on: Enabling value for control when using regmap
+ *                     set_soft_start
  *
  * @enable_time: Time taken for initial enable of regulator (in uS).
  * @off_on_delay: guard time (in uS), before re-enabling a regulator
@@ -345,6 +349,9 @@ struct regulator_desc {
 	unsigned int active_discharge_off;
 	unsigned int active_discharge_mask;
 	unsigned int active_discharge_reg;
+	unsigned int soft_start_reg;
+	unsigned int soft_start_mask;
+	unsigned int soft_start_val_on;
 
 	unsigned int enable_time;
 
@@ -476,6 +483,7 @@ int regulator_set_voltage_time_sel(struct regulator_dev *rdev,
 				   unsigned int new_selector);
 int regulator_set_bypass_regmap(struct regulator_dev *rdev, bool enable);
 int regulator_get_bypass_regmap(struct regulator_dev *rdev, bool *enable);
+int regulator_set_soft_start_regmap(struct regulator_dev *rdev);
 
 int regulator_set_active_discharge_regmap(struct regulator_dev *rdev,
 					  bool enable);
-- 
2.1.4

WARNING: multiple messages have this Message-ID (diff)
From: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
To: broonie@kernel.org
Cc: mark.rutland@arm.com, devicetree@vger.kernel.org,
	alsa-devel@alsa-project.org, patches@opensource.wolfsonmicro.com,
	lgirdwood@gmail.com, linux-kernel@vger.kernel.org,
	robh+dt@kernel.org, lee.jones@linaro.org
Subject: [PATCH v2 4/8] regulator: helpers: Add regmap set_soft_start helper
Date: Tue, 28 Mar 2017 15:14:40 +0100	[thread overview]
Message-ID: <1490710484-25277-4-git-send-email-ckeepax@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <1490710484-25277-1-git-send-email-ckeepax@opensource.wolfsonmicro.com>

Add a helper function regulator_set_soft_start_regmap to allow regmap
based regulators to easily enable soft start.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
---

Changes since v1:
 - Added documentation for the new regulator_desc fields to the kernel doc.

 drivers/regulator/helpers.c      | 18 ++++++++++++++++++
 include/linux/regulator/driver.h |  8 ++++++++
 2 files changed, 26 insertions(+)

diff --git a/drivers/regulator/helpers.c b/drivers/regulator/helpers.c
index 379cdac..a75e7da 100644
--- a/drivers/regulator/helpers.c
+++ b/drivers/regulator/helpers.c
@@ -446,6 +446,24 @@ int regulator_set_bypass_regmap(struct regulator_dev *rdev, bool enable)
 EXPORT_SYMBOL_GPL(regulator_set_bypass_regmap);
 
 /**
+ * regulator_set_soft_start_regmap - Default set_soft_start() using regmap
+ *
+ * @rdev: device to operate on.
+ */
+int regulator_set_soft_start_regmap(struct regulator_dev *rdev)
+{
+	unsigned int val;
+
+	val = rdev->desc->soft_start_val_on;
+	if (!val)
+		val = rdev->desc->soft_start_mask;
+
+	return regmap_update_bits(rdev->regmap, rdev->desc->soft_start_reg,
+				  rdev->desc->soft_start_mask, val);
+}
+EXPORT_SYMBOL_GPL(regulator_set_soft_start_regmap);
+
+/**
  * regulator_get_bypass_regmap - Default get_bypass() using regmap
  *
  * @rdev: device to operate on.
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index dac8e7b1..1054c03 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -292,6 +292,10 @@ enum regulator_type {
  *			   set_active_discharge
  * @active_discharge_reg: Register for control when using regmap
  *			  set_active_discharge
+ * @soft_start_reg: Register for control when using regmap set_soft_start
+ * @soft_start_mask: Mask for control when using regmap set_soft_start
+ * @soft_start_val_on: Enabling value for control when using regmap
+ *                     set_soft_start
  *
  * @enable_time: Time taken for initial enable of regulator (in uS).
  * @off_on_delay: guard time (in uS), before re-enabling a regulator
@@ -345,6 +349,9 @@ struct regulator_desc {
 	unsigned int active_discharge_off;
 	unsigned int active_discharge_mask;
 	unsigned int active_discharge_reg;
+	unsigned int soft_start_reg;
+	unsigned int soft_start_mask;
+	unsigned int soft_start_val_on;
 
 	unsigned int enable_time;
 
@@ -476,6 +483,7 @@ int regulator_set_voltage_time_sel(struct regulator_dev *rdev,
 				   unsigned int new_selector);
 int regulator_set_bypass_regmap(struct regulator_dev *rdev, bool enable);
 int regulator_get_bypass_regmap(struct regulator_dev *rdev, bool *enable);
+int regulator_set_soft_start_regmap(struct regulator_dev *rdev);
 
 int regulator_set_active_discharge_regmap(struct regulator_dev *rdev,
 					  bool enable);
-- 
2.1.4

  parent reply	other threads:[~2017-03-28 14:18 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-28 14:14 [PATCH v2 1/8] regulator: arizona-micsupp: Avoid potential memory leak reading init_data Charles Keepax
2017-03-28 14:14 ` Charles Keepax
2017-03-28 14:14 ` [PATCH v2 2/8] regulator: arizona-ldo1: " Charles Keepax
2017-03-28 14:14   ` Charles Keepax
2017-03-30 21:23   ` Applied "regulator: arizona-ldo1: Avoid potential memory leak reading init_data" to the regulator tree Mark Brown
2017-03-30 21:23     ` Mark Brown
2017-03-28 14:14 ` [PATCH v2 3/8] MAINTAINERS: Add missing regulator regex for Wolfson Arizona parts Charles Keepax
2017-03-28 14:14   ` Charles Keepax
2017-03-30 21:23   ` Applied "MAINTAINERS: Add missing regulator regex for Wolfson Arizona parts" to the regulator tree Mark Brown
2017-03-30 21:23     ` Mark Brown
2017-03-28 14:14 ` Charles Keepax [this message]
2017-03-28 14:14   ` [PATCH v2 4/8] regulator: helpers: Add regmap set_soft_start helper Charles Keepax
2017-04-06 18:55   ` Applied "regulator: helpers: Add regmap set_soft_start helper" to the regulator tree Mark Brown
2017-04-06 18:55     ` Mark Brown
2017-03-28 14:14 ` [PATCH v2 5/8] regulator: helpers: Add regmap set_pull_down helper Charles Keepax
2017-03-28 14:14   ` Charles Keepax
2017-04-06 18:55   ` Applied "regulator: helpers: Add regmap set_pull_down helper" to the regulator tree Mark Brown
2017-04-06 18:55     ` Mark Brown
2017-03-28 14:14 ` [PATCH v2 6/8] regulator: arizona-micbias: Add regulator driver for Arizona micbiases Charles Keepax
2017-03-28 14:14   ` Charles Keepax
2017-03-29  6:18   ` [alsa-devel] " kbuild test robot
2017-03-29  6:18     ` kbuild test robot
2017-03-29  8:30     ` Charles Keepax
2017-03-29  8:30       ` Charles Keepax
2017-03-29 10:04   ` [alsa-devel] " kbuild test robot
2017-03-29 10:04     ` kbuild test robot
2017-03-28 14:14 ` [PATCH v2 7/8] regulator: arizona-micbias: Add description of micbias binding Charles Keepax
2017-03-28 14:14   ` Charles Keepax
2017-03-28 14:14 ` [PATCH v2 8/8] ASoC: arizona: Add support for new micbias regulators Charles Keepax
2017-03-28 14:14   ` Charles Keepax
2017-03-30 21:23 ` Applied "regulator: arizona-micsupp: Avoid potential memory leak reading init_data" to the regulator tree Mark Brown
2017-03-30 21:23   ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1490710484-25277-4-git-send-email-ckeepax@opensource.wolfsonmicro.com \
    --to=ckeepax@opensource.wolfsonmicro.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=lee.jones@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=patches@opensource.wolfsonmicro.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.