From: David Wu <david.wu@rock-chips.com>
To: davem@davemloft.net, heiko@sntech.de, robh+dt@kernel.org,
mark.rutland@arm.com, catalin.marinas@arm.com,
will.deacon@arm.com, olof@lixom.net, linux@armlinux.org.uk,
arnd@arndb.de
Cc: andrew@lunn.ch, f.fainelli@gmail.com, peppe.cavallaro@st.com,
alexandre.torgue@st.com, huangtao@rock-chips.com,
hwg@rock-chips.com, netdev@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, David Wu <david.wu@rock-chips.com>
Subject: [PATCH 09/11] ARM: dts: rk3228-evb: Enable the internal phy for gmac
Date: Fri, 23 Jun 2017 13:02:48 +0800 [thread overview]
Message-ID: <1498194168-8249-1-git-send-email-david.wu@rock-chips.com> (raw)
In-Reply-To: <1498192929-7519-1-git-send-email-david.wu@rock-chips.com>
This patch enables the internal phy for rk3228 evb board
by default.
To use the external 1000M phy on evb board, need to make
some switch of evb board to be on.
Signed-off-by: David Wu <david.wu@rock-chips.com>
---
arch/arm/boot/dts/rk3228-evb.dts | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/arch/arm/boot/dts/rk3228-evb.dts b/arch/arm/boot/dts/rk3228-evb.dts
index 5883433..c4002da 100644
--- a/arch/arm/boot/dts/rk3228-evb.dts
+++ b/arch/arm/boot/dts/rk3228-evb.dts
@@ -50,6 +50,16 @@
device_type = "memory";
reg = <0x60000000 0x40000000>;
};
+
+ vcc_phy: vcc-phy-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ regulator-name = "vcc_phy";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
};
&emmc {
@@ -60,6 +70,16 @@
status = "okay";
};
+&gmac {
+ assigned-clocks = <&cru SCLK_MAC_SRC>;
+ assigned-clock-rates = <50000000>;
+ clock_in_out = "output";
+ phy-supply = <&vcc_phy>;
+ phy-mode = "rmii";
+ phy-type = "internal";
+ status = "okay";
+};
+
&tsadc {
status = "okay";
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: David Wu <david.wu-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
To: davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org,
heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
catalin.marinas-5wv7dgnIgG8@public.gmane.org,
will.deacon-5wv7dgnIgG8@public.gmane.org,
olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org,
linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org,
arnd-r2nGTMty4D4@public.gmane.org
Cc: andrew-g2DYL2Zd6BY@public.gmane.org,
f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
peppe.cavallaro-qxv4g6HH51o@public.gmane.org,
alexandre.torgue-qxv4g6HH51o@public.gmane.org,
huangtao-TNX95d0MmH7DzftRWevZcw@public.gmane.org,
hwg-TNX95d0MmH7DzftRWevZcw@public.gmane.org,
netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
David Wu <david.wu-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
Subject: [PATCH 09/11] ARM: dts: rk3228-evb: Enable the internal phy for gmac
Date: Fri, 23 Jun 2017 13:02:48 +0800 [thread overview]
Message-ID: <1498194168-8249-1-git-send-email-david.wu@rock-chips.com> (raw)
In-Reply-To: <1498192929-7519-1-git-send-email-david.wu-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
This patch enables the internal phy for rk3228 evb board
by default.
To use the external 1000M phy on evb board, need to make
some switch of evb board to be on.
Signed-off-by: David Wu <david.wu-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
---
arch/arm/boot/dts/rk3228-evb.dts | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/arch/arm/boot/dts/rk3228-evb.dts b/arch/arm/boot/dts/rk3228-evb.dts
index 5883433..c4002da 100644
--- a/arch/arm/boot/dts/rk3228-evb.dts
+++ b/arch/arm/boot/dts/rk3228-evb.dts
@@ -50,6 +50,16 @@
device_type = "memory";
reg = <0x60000000 0x40000000>;
};
+
+ vcc_phy: vcc-phy-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ regulator-name = "vcc_phy";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
};
&emmc {
@@ -60,6 +70,16 @@
status = "okay";
};
+&gmac {
+ assigned-clocks = <&cru SCLK_MAC_SRC>;
+ assigned-clock-rates = <50000000>;
+ clock_in_out = "output";
+ phy-supply = <&vcc_phy>;
+ phy-mode = "rmii";
+ phy-type = "internal";
+ status = "okay";
+};
+
&tsadc {
status = "okay";
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: david.wu@rock-chips.com (David Wu)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 09/11] ARM: dts: rk3228-evb: Enable the internal phy for gmac
Date: Fri, 23 Jun 2017 13:02:48 +0800 [thread overview]
Message-ID: <1498194168-8249-1-git-send-email-david.wu@rock-chips.com> (raw)
In-Reply-To: <1498192929-7519-1-git-send-email-david.wu@rock-chips.com>
This patch enables the internal phy for rk3228 evb board
by default.
To use the external 1000M phy on evb board, need to make
some switch of evb board to be on.
Signed-off-by: David Wu <david.wu@rock-chips.com>
---
arch/arm/boot/dts/rk3228-evb.dts | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/arch/arm/boot/dts/rk3228-evb.dts b/arch/arm/boot/dts/rk3228-evb.dts
index 5883433..c4002da 100644
--- a/arch/arm/boot/dts/rk3228-evb.dts
+++ b/arch/arm/boot/dts/rk3228-evb.dts
@@ -50,6 +50,16 @@
device_type = "memory";
reg = <0x60000000 0x40000000>;
};
+
+ vcc_phy: vcc-phy-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ regulator-name = "vcc_phy";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
};
&emmc {
@@ -60,6 +70,16 @@
status = "okay";
};
+&gmac {
+ assigned-clocks = <&cru SCLK_MAC_SRC>;
+ assigned-clock-rates = <50000000>;
+ clock_in_out = "output";
+ phy-supply = <&vcc_phy>;
+ phy-mode = "rmii";
+ phy-type = "internal";
+ status = "okay";
+};
+
&tsadc {
status = "okay";
--
1.9.1
next prev parent reply other threads:[~2017-06-23 4:59 UTC|newest]
Thread overview: 77+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-23 4:41 [PATCH 00/11] Add the mac internal ephy support David Wu
2017-06-23 4:41 ` David Wu
2017-06-23 4:41 ` David Wu
2017-06-23 4:41 ` [PATCH 01/11] net: phy: Add rockchip phy driver support David Wu
2017-06-23 4:41 ` David Wu
2017-06-23 13:55 ` Andrew Lunn
2017-06-23 13:55 ` Andrew Lunn
2017-06-23 16:18 ` Florian Fainelli
2017-06-23 16:18 ` Florian Fainelli
2017-06-24 2:10 ` Andrew Lunn
2017-06-24 2:10 ` Andrew Lunn
2017-06-24 2:19 ` Andrew Lunn
2017-06-24 2:19 ` Andrew Lunn
2017-06-24 2:19 ` Andrew Lunn
2017-06-24 8:38 ` Heiko Stuebner
2017-06-24 8:38 ` Heiko Stuebner
2017-06-24 8:38 ` Heiko Stuebner
2017-06-24 14:04 ` Andrew Lunn
2017-06-24 14:04 ` Andrew Lunn
2017-06-24 14:04 ` Andrew Lunn
2017-06-24 16:05 ` Heiko Stuebner
2017-06-24 16:05 ` Heiko Stuebner
2017-06-24 16:05 ` Heiko Stuebner
2017-06-27 14:44 ` David.Wu
2017-06-27 14:44 ` David.Wu
2017-06-27 14:46 ` Andrew Lunn
2017-06-27 14:46 ` Andrew Lunn
2017-06-27 15:07 ` David.Wu
2017-06-27 15:07 ` David.Wu
2017-06-23 4:42 ` [PATCH 02/11] multi_v7_defconfig: Make rockchip mac phy built-in David Wu
2017-06-23 4:42 ` David Wu
2017-06-23 4:42 ` [PATCH 03/11] arm64: defconfig: Enable CONFIG_ROCKCHIP_MAC_PHY David Wu
2017-06-23 4:42 ` David Wu
2017-06-23 4:42 ` [PATCH 04/11] net: stmmac: dwmac-rk: Remove unwanted code for rk3328_set_to_rmii() David Wu
2017-06-23 4:42 ` David Wu
2017-06-23 4:42 ` David Wu
2017-06-24 2:22 ` Andrew Lunn
2017-06-24 2:22 ` Andrew Lunn
2017-06-24 2:22 ` Andrew Lunn
2017-06-23 4:59 ` [PATCH 05/11] net: stmmac: dwmac-rk: Add internal phy support David Wu
2017-06-23 4:59 ` David Wu
2017-06-23 4:59 ` David Wu
2017-06-23 16:22 ` Florian Fainelli
2017-06-23 16:22 ` Florian Fainelli
2017-06-23 16:22 ` Florian Fainelli
2017-06-27 14:21 ` David.Wu
2017-06-27 14:52 ` Andrew Lunn
2017-06-27 14:52 ` Andrew Lunn
2017-06-23 17:19 ` Heiko Stuebner
2017-06-23 17:19 ` Heiko Stuebner
2017-06-27 14:33 ` David.Wu
2017-06-27 14:33 ` David.Wu
2017-06-27 14:33 ` David.Wu
2017-06-27 15:40 ` Heiko Stuebner
2017-06-27 15:40 ` Heiko Stuebner
2017-06-27 15:40 ` Heiko Stuebner
2017-06-24 2:29 ` Andrew Lunn
2017-06-24 2:29 ` Andrew Lunn
2017-06-24 2:29 ` Andrew Lunn
2017-07-27 12:44 ` David.Wu
2017-07-27 12:44 ` David.Wu
2017-06-23 4:59 ` [PATCH 06/11] net: stmmac: dwmac-rk: Add internal phy support for rk3228 David Wu
2017-06-23 4:59 ` David Wu
2017-06-23 4:59 ` David Wu
2017-06-23 5:01 ` [PATCH 07/11] net: stmmac: dwmac-rk: Add internal phy supprot for rk3328 David Wu
2017-06-23 5:01 ` David Wu
2017-06-23 5:01 ` David Wu
2017-06-23 5:02 ` [PATCH 08/11] ARM: dts: rk322x: Add support internal phy for gmac David Wu
2017-06-23 5:02 ` David Wu
2017-06-23 5:02 ` David Wu [this message]
2017-06-23 5:02 ` [PATCH 09/11] ARM: dts: rk3228-evb: Enable the " David Wu
2017-06-23 5:02 ` David Wu
2017-06-23 5:03 ` [PATCH 10/11] ARM64: dts: rockchip: Add gmac2phy node support for rk3328 David Wu
2017-06-23 5:03 ` David Wu
2017-06-23 5:04 ` [PATCH 11/11] ARM64: dts: rockchip: Enable gmac2phy for rk3328-evb David Wu
2017-06-23 5:04 ` David Wu
2017-06-23 5:04 ` David Wu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1498194168-8249-1-git-send-email-david.wu@rock-chips.com \
--to=david.wu@rock-chips.com \
--cc=alexandre.torgue@st.com \
--cc=andrew@lunn.ch \
--cc=arnd@arndb.de \
--cc=catalin.marinas@arm.com \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=f.fainelli@gmail.com \
--cc=heiko@sntech.de \
--cc=huangtao@rock-chips.com \
--cc=hwg@rock-chips.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=netdev@vger.kernel.org \
--cc=olof@lixom.net \
--cc=peppe.cavallaro@st.com \
--cc=robh+dt@kernel.org \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.