From: Claudiu Beznea <claudiu.beznea@microchip.com>
To: <nicolas.ferre@microchip.com>,
<alexandre.belloni@free-electrons.com>, <robh+dt@kernel.org>,
<mark.rutland@arm.com>, <linux@armlinux.org.uk>, <sza@esh.hu>
Cc: <linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<cristian.birsan@microchip.com>,
<ludovic.desroches@microchip.com>,
Cyrille Pitchen <cyrille.pitchen@atmel.com>,
Claudiu Beznea <claudiu.beznea@microchip.com>
Subject: [PATCH v3 1/5] ARM: dts: at91: sama5d2: add QSPI nodes
Date: Thu, 6 Jul 2017 11:35:25 +0300 [thread overview]
Message-ID: <1499330129-29319-2-git-send-email-claudiu.beznea@microchip.com> (raw)
In-Reply-To: <1499330129-29319-1-git-send-email-claudiu.beznea@microchip.com>
From: Cyrille Pitchen <cyrille.pitchen@atmel.com>
This patch adds DT nodes for sama5d2 QSPI controllers.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
[claudiu.beznea@microchip.com: change subject to match the desired prefix]
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
arch/arm/boot/dts/sama5d2.dtsi | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index cc06da3..71e9d83 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -954,6 +954,28 @@
};
};
+ qspi0: spi@f0020000 {
+ compatible = "atmel,sama5d2-qspi";
+ reg = <0xf0020000 0x100>, <0xd0000000 0x08000000>;
+ reg-names = "qspi_base", "qspi_mmap";
+ interrupts = <52 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&qspi0_clk>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ qspi1: spi@f0024000 {
+ compatible = "atmel,sama5d2-qspi";
+ reg = <0xf0024000 0x100>, <0xd8000000 0x08000000>;
+ reg-names = "qspi_base", "qspi_mmap";
+ interrupts = <53 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&qspi1_clk>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
sha@f0028000 {
compatible = "atmel,at91sam9g46-sha";
reg = <0xf0028000 0x100>;
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Claudiu Beznea <claudiu.beznea@microchip.com>
To: nicolas.ferre@microchip.com,
alexandre.belloni@free-electrons.com, robh+dt@kernel.org,
mark.rutland@arm.com, linux@armlinux.org.uk, sza@esh.hu
Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, cristian.birsan@microchip.com,
ludovic.desroches@microchip.com,
Cyrille Pitchen <cyrille.pitchen@atmel.com>,
Claudiu Beznea <claudiu.beznea@microchip.com>
Subject: [PATCH v3 1/5] ARM: dts: at91: sama5d2: add QSPI nodes
Date: Thu, 6 Jul 2017 11:35:25 +0300 [thread overview]
Message-ID: <1499330129-29319-2-git-send-email-claudiu.beznea@microchip.com> (raw)
In-Reply-To: <1499330129-29319-1-git-send-email-claudiu.beznea@microchip.com>
From: Cyrille Pitchen <cyrille.pitchen@atmel.com>
This patch adds DT nodes for sama5d2 QSPI controllers.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
[claudiu.beznea@microchip.com: change subject to match the desired prefix]
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
arch/arm/boot/dts/sama5d2.dtsi | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index cc06da3..71e9d83 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -954,6 +954,28 @@
};
};
+ qspi0: spi@f0020000 {
+ compatible = "atmel,sama5d2-qspi";
+ reg = <0xf0020000 0x100>, <0xd0000000 0x08000000>;
+ reg-names = "qspi_base", "qspi_mmap";
+ interrupts = <52 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&qspi0_clk>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ qspi1: spi@f0024000 {
+ compatible = "atmel,sama5d2-qspi";
+ reg = <0xf0024000 0x100>, <0xd8000000 0x08000000>;
+ reg-names = "qspi_base", "qspi_mmap";
+ interrupts = <53 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&qspi1_clk>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
sha@f0028000 {
compatible = "atmel,at91sam9g46-sha";
reg = <0xf0028000 0x100>;
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: claudiu.beznea@microchip.com (Claudiu Beznea)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 1/5] ARM: dts: at91: sama5d2: add QSPI nodes
Date: Thu, 6 Jul 2017 11:35:25 +0300 [thread overview]
Message-ID: <1499330129-29319-2-git-send-email-claudiu.beznea@microchip.com> (raw)
In-Reply-To: <1499330129-29319-1-git-send-email-claudiu.beznea@microchip.com>
From: Cyrille Pitchen <cyrille.pitchen@atmel.com>
This patch adds DT nodes for sama5d2 QSPI controllers.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
[claudiu.beznea at microchip.com: change subject to match the desired prefix]
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
arch/arm/boot/dts/sama5d2.dtsi | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index cc06da3..71e9d83 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -954,6 +954,28 @@
};
};
+ qspi0: spi at f0020000 {
+ compatible = "atmel,sama5d2-qspi";
+ reg = <0xf0020000 0x100>, <0xd0000000 0x08000000>;
+ reg-names = "qspi_base", "qspi_mmap";
+ interrupts = <52 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&qspi0_clk>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ qspi1: spi at f0024000 {
+ compatible = "atmel,sama5d2-qspi";
+ reg = <0xf0024000 0x100>, <0xd8000000 0x08000000>;
+ reg-names = "qspi_base", "qspi_mmap";
+ interrupts = <53 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&qspi1_clk>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
sha at f0028000 {
compatible = "atmel,at91sam9g46-sha";
reg = <0xf0028000 0x100>;
--
2.7.4
next prev parent reply other threads:[~2017-07-06 8:35 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-06 8:35 [PATCH v3 0/5] Add SoM1 support Claudiu Beznea
2017-07-06 8:35 ` Claudiu Beznea
2017-07-06 8:35 ` Claudiu Beznea
2017-07-06 8:35 ` Claudiu Beznea [this message]
2017-07-06 8:35 ` [PATCH v3 1/5] ARM: dts: at91: sama5d2: add QSPI nodes Claudiu Beznea
2017-07-06 8:35 ` Claudiu Beznea
2017-07-06 8:35 ` [PATCH v3 2/5] ARM: dts: at91: sama5d2: add isc node Claudiu Beznea
2017-07-06 8:35 ` Claudiu Beznea
2017-07-06 8:35 ` Claudiu Beznea
2017-07-06 8:35 ` [PATCH v3 3/5] drivers: soc: atmel: Add basic support for new sama5d2 SiPs Claudiu Beznea
2017-07-06 8:35 ` Claudiu Beznea
2017-07-06 8:35 ` Claudiu Beznea
2017-07-06 8:35 ` [PATCH v3 4/5] ARM: dts: at91: at91-sama5d27_som1: add sama5d27 SoM1 support Claudiu Beznea
2017-07-06 8:35 ` Claudiu Beznea
2017-07-06 8:35 ` Claudiu Beznea
2017-07-06 8:35 ` [PATCH v3 5/5] ARM: dts: at91: at91-sama5d27_som1_ek: Add sama5d27 SoM1 EK support Claudiu Beznea
2017-07-06 8:35 ` Claudiu Beznea
2017-07-06 8:35 ` Claudiu Beznea
2017-07-06 12:29 ` [PATCH v3 0/5] Add SoM1 support Nicolas Ferre
2017-07-06 12:29 ` Nicolas Ferre
2017-07-06 12:29 ` Nicolas Ferre
2017-07-06 12:38 ` Ludovic Desroches
2017-07-06 12:38 ` Ludovic Desroches
2017-07-06 12:38 ` Ludovic Desroches
2017-07-17 9:13 ` Alexandre Belloni
2017-07-17 9:13 ` Alexandre Belloni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1499330129-29319-2-git-send-email-claudiu.beznea@microchip.com \
--to=claudiu.beznea@microchip.com \
--cc=alexandre.belloni@free-electrons.com \
--cc=cristian.birsan@microchip.com \
--cc=cyrille.pitchen@atmel.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=ludovic.desroches@microchip.com \
--cc=mark.rutland@arm.com \
--cc=nicolas.ferre@microchip.com \
--cc=robh+dt@kernel.org \
--cc=sza@esh.hu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.