From: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
To: Wolfram Sang <wsa@the-dreams.de>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@st.com>,
Russell King <linux@armlinux.org.uk>, <linux-i2c@vger.kernel.org>,
<devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>
Cc: <pierre-yves.mordret@st.com>
Subject: [PATCH v3 0/5] Add support for the STM32F7 I2C
Date: Thu, 6 Jul 2017 17:53:01 +0200 [thread overview]
Message-ID: <1499356386-28779-1-git-send-email-pierre-yves.mordret@st.com> (raw)
This patchset adds support for the I2C controller embedded in STM32F7xx SoC.
It enables I2C transfer in interrupt mode with Standard-mode, Fast-mode and
Fast-mode+ bus speed.
---
Version history:
v3:
* Move stm32f7_i2c_match above stm32f7_i2c_driver
* of_device_get_match_data instead of of_match_device
* Improve I2C Speed DT gathering
* dev_err into dev_dbg for Arbitration loss
* Remove useless space aligned
v2:
* Implement an I2C timings computation algorithm instead of static
values(bindings). Algorithm uses generic I2C SCL Falling/Rising
bindings and System clock to compute its timings.
* I2C Device Tree Update
---
Pierre-Yves MORDRET (5):
dt-bindings: i2c-stm32: Document the STM32F7 I2C bindings
i2c: i2c-stm32f4: use generic definition of speed enum
i2c: i2c-stm32f7: add driver
ARM: dts: stm32: Add I2C1 support for STM32F746 SoC
ARM: dts: stm32: Add I2C1 support for STM32F746 eval board
.../devicetree/bindings/i2c/i2c-stm32.txt | 29 +-
arch/arm/boot/dts/stm32746g-eval.dts | 8 +
arch/arm/boot/dts/stm32f746.dtsi | 22 +
drivers/i2c/busses/Kconfig | 10 +
drivers/i2c/busses/Makefile | 1 +
drivers/i2c/busses/i2c-stm32.h | 20 +
drivers/i2c/busses/i2c-stm32f4.c | 18 +-
drivers/i2c/busses/i2c-stm32f7.c | 974 +++++++++++++++++++++
8 files changed, 1068 insertions(+), 14 deletions(-)
create mode 100644 drivers/i2c/busses/i2c-stm32.h
create mode 100644 drivers/i2c/busses/i2c-stm32f7.c
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
To: Wolfram Sang <wsa@the-dreams.de>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@st.com>,
Russell King <linux@armlinux.org.uk>,
linux-i2c@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Cc: pierre-yves.mordret@st.com
Subject: [PATCH v3 0/5] Add support for the STM32F7 I2C
Date: Thu, 6 Jul 2017 17:53:01 +0200 [thread overview]
Message-ID: <1499356386-28779-1-git-send-email-pierre-yves.mordret@st.com> (raw)
This patchset adds support for the I2C controller embedded in STM32F7xx SoC.
It enables I2C transfer in interrupt mode with Standard-mode, Fast-mode and
Fast-mode+ bus speed.
---
Version history:
v3:
* Move stm32f7_i2c_match above stm32f7_i2c_driver
* of_device_get_match_data instead of of_match_device
* Improve I2C Speed DT gathering
* dev_err into dev_dbg for Arbitration loss
* Remove useless space aligned
v2:
* Implement an I2C timings computation algorithm instead of static
values(bindings). Algorithm uses generic I2C SCL Falling/Rising
bindings and System clock to compute its timings.
* I2C Device Tree Update
---
Pierre-Yves MORDRET (5):
dt-bindings: i2c-stm32: Document the STM32F7 I2C bindings
i2c: i2c-stm32f4: use generic definition of speed enum
i2c: i2c-stm32f7: add driver
ARM: dts: stm32: Add I2C1 support for STM32F746 SoC
ARM: dts: stm32: Add I2C1 support for STM32F746 eval board
.../devicetree/bindings/i2c/i2c-stm32.txt | 29 +-
arch/arm/boot/dts/stm32746g-eval.dts | 8 +
arch/arm/boot/dts/stm32f746.dtsi | 22 +
drivers/i2c/busses/Kconfig | 10 +
drivers/i2c/busses/Makefile | 1 +
drivers/i2c/busses/i2c-stm32.h | 20 +
drivers/i2c/busses/i2c-stm32f4.c | 18 +-
drivers/i2c/busses/i2c-stm32f7.c | 974 +++++++++++++++++++++
8 files changed, 1068 insertions(+), 14 deletions(-)
create mode 100644 drivers/i2c/busses/i2c-stm32.h
create mode 100644 drivers/i2c/busses/i2c-stm32f7.c
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: pierre-yves.mordret@st.com (Pierre-Yves MORDRET)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 0/5] Add support for the STM32F7 I2C
Date: Thu, 6 Jul 2017 17:53:01 +0200 [thread overview]
Message-ID: <1499356386-28779-1-git-send-email-pierre-yves.mordret@st.com> (raw)
This patchset adds support for the I2C controller embedded in STM32F7xx SoC.
It enables I2C transfer in interrupt mode with Standard-mode, Fast-mode and
Fast-mode+ bus speed.
---
Version history:
v3:
* Move stm32f7_i2c_match above stm32f7_i2c_driver
* of_device_get_match_data instead of of_match_device
* Improve I2C Speed DT gathering
* dev_err into dev_dbg for Arbitration loss
* Remove useless space aligned
v2:
* Implement an I2C timings computation algorithm instead of static
values(bindings). Algorithm uses generic I2C SCL Falling/Rising
bindings and System clock to compute its timings.
* I2C Device Tree Update
---
Pierre-Yves MORDRET (5):
dt-bindings: i2c-stm32: Document the STM32F7 I2C bindings
i2c: i2c-stm32f4: use generic definition of speed enum
i2c: i2c-stm32f7: add driver
ARM: dts: stm32: Add I2C1 support for STM32F746 SoC
ARM: dts: stm32: Add I2C1 support for STM32F746 eval board
.../devicetree/bindings/i2c/i2c-stm32.txt | 29 +-
arch/arm/boot/dts/stm32746g-eval.dts | 8 +
arch/arm/boot/dts/stm32f746.dtsi | 22 +
drivers/i2c/busses/Kconfig | 10 +
drivers/i2c/busses/Makefile | 1 +
drivers/i2c/busses/i2c-stm32.h | 20 +
drivers/i2c/busses/i2c-stm32f4.c | 18 +-
drivers/i2c/busses/i2c-stm32f7.c | 974 +++++++++++++++++++++
8 files changed, 1068 insertions(+), 14 deletions(-)
create mode 100644 drivers/i2c/busses/i2c-stm32.h
create mode 100644 drivers/i2c/busses/i2c-stm32f7.c
--
2.7.4
next reply other threads:[~2017-07-06 15:54 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-06 15:53 Pierre-Yves MORDRET [this message]
2017-07-06 15:53 ` [PATCH v3 0/5] Add support for the STM32F7 I2C Pierre-Yves MORDRET
2017-07-06 15:53 ` Pierre-Yves MORDRET
2017-07-06 15:53 ` [PATCH v3 1/5] dt-bindings: i2c-stm32: Document the STM32F7 I2C bindings Pierre-Yves MORDRET
2017-07-06 15:53 ` Pierre-Yves MORDRET
2017-07-06 15:53 ` Pierre-Yves MORDRET
2017-07-07 13:41 ` Rob Herring
2017-07-07 13:41 ` Rob Herring
2017-07-07 13:41 ` Rob Herring
2017-07-06 15:53 ` [PATCH v3 2/5] i2c: i2c-stm32f4: use generic definition of speed enum Pierre-Yves MORDRET
2017-07-06 15:53 ` Pierre-Yves MORDRET
2017-07-06 15:53 ` Pierre-Yves MORDRET
2017-07-06 15:53 ` [PATCH v3 3/5] i2c: i2c-stm32f7: add driver Pierre-Yves MORDRET
2017-07-06 15:53 ` Pierre-Yves MORDRET
2017-07-06 15:53 ` Pierre-Yves MORDRET
2017-07-06 15:53 ` [PATCH v3 4/5] ARM: dts: stm32: Add I2C1 support for STM32F746 SoC Pierre-Yves MORDRET
2017-07-06 15:53 ` Pierre-Yves MORDRET
2017-07-06 15:53 ` Pierre-Yves MORDRET
2017-07-06 15:53 ` [PATCH v3 5/5] ARM: dts: stm32: Add I2C1 support for STM32F746 eval board Pierre-Yves MORDRET
2017-07-06 15:53 ` Pierre-Yves MORDRET
2017-07-06 15:53 ` Pierre-Yves MORDRET
2017-07-20 8:34 ` [PATCH v3 0/5] Add support for the STM32F7 I2C Pierre Yves MORDRET
2017-07-20 8:34 ` Pierre Yves MORDRET
2017-07-20 8:34 ` Pierre Yves MORDRET
2017-08-22 13:41 ` Pierre Yves MORDRET
2017-08-22 13:41 ` Pierre Yves MORDRET
2017-08-22 13:41 ` Pierre Yves MORDRET
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1499356386-28779-1-git-send-email-pierre-yves.mordret@st.com \
--to=pierre-yves.mordret@st.com \
--cc=alexandre.torgue@st.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=robh+dt@kernel.org \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.