From: Neil Armstrong <narmstrong@baylibre.com>
To: khilman@baylibre.com, carlo@caione.org
Cc: Neil Armstrong <narmstrong@baylibre.com>,
linux-amlogic@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Subject: [PATCH 0/2] ARM64: meson-gxm: Add support for Khadas VIM2
Date: Tue, 19 Sep 2017 16:53:38 +0200 [thread overview]
Message-ID: <1505832820-3517-1-git-send-email-narmstrong@baylibre.com> (raw)
The Khadas VIM2 is a Single Board Computer, respin of the origin
Khadas VIM board, using an Amlogic S912 SoC and more server oriented.
It provides the same external connectors and header pinout, plus a SPI
NOR Flash, a reprogrammable STM8S003 MCU, FPC Connector, Cooling FAN header
and Pogo Pads Arrays.
To eventually provide access to the SPI NOR flash, the eMMC DS pin must be
configured as a different pincrl node to disable it's access from the MMC
Controller. This first patch splits this emmc pins entry for GXBB and GXL.
Neil Armstrong (2):
ARM64: dts: meson-gxl: Take eMMC data strobe out of eMMC pins
ARM64: dts: meson-gxm: Add support for Khadas VIM2
Documentation/devicetree/bindings/arm/amlogic.txt | 1 +
arch/arm64/boot/dts/amlogic/Makefile | 1 +
.../arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi | 2 +-
.../boot/dts/amlogic/meson-gxbb-nanopi-k2.dts | 2 +-
.../boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts | 2 +-
.../arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 2 +-
arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi | 2 +-
.../boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 2 +-
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 10 +-
.../dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts | 2 +-
.../dts/amlogic/meson-gxl-s905x-libretech-cc.dts | 2 +-
.../dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts | 2 +-
.../boot/dts/amlogic/meson-gxl-s905x-p212.dtsi | 2 +-
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 10 +-
.../boot/dts/amlogic/meson-gxm-khadas-vim2.dts | 401 +++++++++++++++++++++
.../arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts | 2 +-
arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts | 2 +-
17 files changed, 431 insertions(+), 16 deletions(-)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: narmstrong@baylibre.com (Neil Armstrong)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/2] ARM64: meson-gxm: Add support for Khadas VIM2
Date: Tue, 19 Sep 2017 16:53:38 +0200 [thread overview]
Message-ID: <1505832820-3517-1-git-send-email-narmstrong@baylibre.com> (raw)
The Khadas VIM2 is a Single Board Computer, respin of the origin
Khadas VIM board, using an Amlogic S912 SoC and more server oriented.
It provides the same external connectors and header pinout, plus a SPI
NOR Flash, a reprogrammable STM8S003 MCU, FPC Connector, Cooling FAN header
and Pogo Pads Arrays.
To eventually provide access to the SPI NOR flash, the eMMC DS pin must be
configured as a different pincrl node to disable it's access from the MMC
Controller. This first patch splits this emmc pins entry for GXBB and GXL.
Neil Armstrong (2):
ARM64: dts: meson-gxl: Take eMMC data strobe out of eMMC pins
ARM64: dts: meson-gxm: Add support for Khadas VIM2
Documentation/devicetree/bindings/arm/amlogic.txt | 1 +
arch/arm64/boot/dts/amlogic/Makefile | 1 +
.../arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi | 2 +-
.../boot/dts/amlogic/meson-gxbb-nanopi-k2.dts | 2 +-
.../boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts | 2 +-
.../arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 2 +-
arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi | 2 +-
.../boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 2 +-
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 10 +-
.../dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts | 2 +-
.../dts/amlogic/meson-gxl-s905x-libretech-cc.dts | 2 +-
.../dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts | 2 +-
.../boot/dts/amlogic/meson-gxl-s905x-p212.dtsi | 2 +-
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 10 +-
.../boot/dts/amlogic/meson-gxm-khadas-vim2.dts | 401 +++++++++++++++++++++
.../arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts | 2 +-
arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts | 2 +-
17 files changed, 431 insertions(+), 16 deletions(-)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: narmstrong@baylibre.com (Neil Armstrong)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH 0/2] ARM64: meson-gxm: Add support for Khadas VIM2
Date: Tue, 19 Sep 2017 16:53:38 +0200 [thread overview]
Message-ID: <1505832820-3517-1-git-send-email-narmstrong@baylibre.com> (raw)
The Khadas VIM2 is a Single Board Computer, respin of the origin
Khadas VIM board, using an Amlogic S912 SoC and more server oriented.
It provides the same external connectors and header pinout, plus a SPI
NOR Flash, a reprogrammable STM8S003 MCU, FPC Connector, Cooling FAN header
and Pogo Pads Arrays.
To eventually provide access to the SPI NOR flash, the eMMC DS pin must be
configured as a different pincrl node to disable it's access from the MMC
Controller. This first patch splits this emmc pins entry for GXBB and GXL.
Neil Armstrong (2):
ARM64: dts: meson-gxl: Take eMMC data strobe out of eMMC pins
ARM64: dts: meson-gxm: Add support for Khadas VIM2
Documentation/devicetree/bindings/arm/amlogic.txt | 1 +
arch/arm64/boot/dts/amlogic/Makefile | 1 +
.../arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi | 2 +-
.../boot/dts/amlogic/meson-gxbb-nanopi-k2.dts | 2 +-
.../boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts | 2 +-
.../arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 2 +-
arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi | 2 +-
.../boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 2 +-
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 10 +-
.../dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts | 2 +-
.../dts/amlogic/meson-gxl-s905x-libretech-cc.dts | 2 +-
.../dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts | 2 +-
.../boot/dts/amlogic/meson-gxl-s905x-p212.dtsi | 2 +-
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 10 +-
.../boot/dts/amlogic/meson-gxm-khadas-vim2.dts | 401 +++++++++++++++++++++
.../arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts | 2 +-
arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts | 2 +-
17 files changed, 431 insertions(+), 16 deletions(-)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
--
1.9.1
next reply other threads:[~2017-09-19 14:53 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-19 14:53 Neil Armstrong [this message]
2017-09-19 14:53 ` [PATCH 0/2] ARM64: meson-gxm: Add support for Khadas VIM2 Neil Armstrong
2017-09-19 14:53 ` Neil Armstrong
2017-09-19 14:53 ` [PATCH 1/2] ARM64: dts: meson-gxl: Take eMMC data strobe out of eMMC pins Neil Armstrong
2017-09-19 14:53 ` Neil Armstrong
2017-09-19 14:53 ` Neil Armstrong
2017-09-19 14:53 ` [PATCH 2/2] ARM64: dts: meson-gxm: Add support for Khadas VIM2 Neil Armstrong
2017-09-19 14:53 ` Neil Armstrong
2017-09-19 14:53 ` Neil Armstrong
2017-09-19 16:11 ` Jerome Brunet
2017-09-19 16:11 ` Jerome Brunet
2017-09-19 16:11 ` Jerome Brunet
2017-09-19 16:11 ` Jerome Brunet
2017-09-19 17:55 ` Martin Blumenstingl
2017-09-19 17:55 ` Martin Blumenstingl
2017-09-19 17:55 ` Martin Blumenstingl
2017-09-19 17:55 ` Martin Blumenstingl
2017-09-20 8:29 ` Neil Armstrong
2017-09-20 8:29 ` Neil Armstrong
2017-09-20 8:29 ` Neil Armstrong
2017-09-20 8:29 ` Neil Armstrong
2017-09-21 23:47 ` Rob Herring
2017-09-21 23:47 ` Rob Herring
2017-09-21 23:47 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1505832820-3517-1-git-send-email-narmstrong@baylibre.com \
--to=narmstrong@baylibre.com \
--cc=carlo@caione.org \
--cc=devicetree@vger.kernel.org \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.