From: <yintang@qti.qualcomm.com>
To: <ath10k@lists.infradead.org>
Cc: <linux-wireless@vger.kernel.org>
Subject: [PATCH V6 3/5] ath10k: Enable TDLS peer inactivity detection
Date: Mon, 16 Oct 2017 14:00:31 +0800 [thread overview]
Message-ID: <1508133633-23214-4-git-send-email-yintang@qti.qualcomm.com> (raw)
In-Reply-To: <1508133633-23214-1-git-send-email-yintang@qti.qualcomm.com>
From: Yingying Tang <yintang@qti.qualcomm.com>
Enable TDLS peer inactivity detetion feature.
QCA6174 firmware(version: WLAN.RM.4.4) support TDLS link inactivity detecting.
Set related parameters in TDLS WMI command to enable this feature.
Signed-off-by: Yingying Tang <yintang@qti.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/wmi-tlv.c | 52 +++++++++++++++++++++++++++++
drivers/net/wireless/ath/ath10k/wmi-tlv.h | 9 +++++
drivers/net/wireless/ath/ath10k/wmi.h | 1 +
3 files changed, 62 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index f60b46e..63bb2c4 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -412,6 +412,49 @@ static int ath10k_wmi_tlv_event_tx_pause(struct ath10k *ar,
return 0;
}
+void ath10k_wmi_event_tdls_peer(struct ath10k *ar, struct sk_buff *skb)
+{
+ struct ieee80211_sta *station;
+ const struct wmi_tlv_tdls_peer_event *ev;
+ const void **tb;
+ struct ath10k_vif *arvif;
+
+ tb = ath10k_wmi_tlv_parse_alloc(ar, skb->data, skb->len, GFP_ATOMIC);
+ if (IS_ERR(tb)) {
+ ath10k_warn(ar, "tdls peer failed to parse tlv");
+ return;
+ }
+ ev = tb[WMI_TLV_TAG_STRUCT_TDLS_PEER_EVENT];
+ if (!ev) {
+ kfree(tb);
+ ath10k_warn(ar, "tdls peer NULL event");
+ return;
+ }
+
+ switch (ev->peer_reason) {
+ case WMI_TDLS_TEARDOWN_REASON_TX:
+ case WMI_TDLS_TEARDOWN_REASON_RSSI:
+ case WMI_TDLS_TEARDOWN_REASON_PTR_TIMEOUT:
+ station = ieee80211_find_sta_by_ifaddr(ar->hw,
+ ev->peer_macaddr.addr,
+ NULL);
+ if (!station) {
+ ath10k_warn(ar, "did not find station from tdls peer event");
+ kfree(tb);
+ return;
+ }
+ arvif = ath10k_get_arvif(ar, ev->vdev_id);
+ ieee80211_tdls_oper_request(
+ arvif->vif, station->addr,
+ NL80211_TDLS_TEARDOWN,
+ WLAN_REASON_TDLS_TEARDOWN_UNREACHABLE,
+ GFP_ATOMIC
+ );
+ break;
+ }
+ kfree(tb);
+}
+
/***********/
/* TLV ops */
/***********/
@@ -552,6 +595,9 @@ static void ath10k_wmi_tlv_op_rx(struct ath10k *ar, struct sk_buff *skb)
case WMI_TLV_TX_PAUSE_EVENTID:
ath10k_wmi_tlv_event_tx_pause(ar, skb);
break;
+ case WMI_TLV_TDLS_PEER_EVENTID:
+ ath10k_wmi_event_tdls_peer(ar, skb);
+ break;
default:
ath10k_warn(ar, "Unknown eventid: %d\n", id);
break;
@@ -2750,6 +2796,12 @@ static void *ath10k_wmi_tlv_put_wmm(void *ptr,
if (test_bit(WMI_SERVICE_TDLS_UAPSD_BUFFER_STA, ar->wmi.svc_map))
options |= WMI_TLV_TDLS_BUFFER_STA_EN;
+ /* WMI_TDLS_ENABLE_ACTIVE_EXTERNAL_CONTROL means firm will handle TDLS
+ * link inactivity detecting logic.
+ */
+ if (state == WMI_TDLS_ENABLE_ACTIVE)
+ state = WMI_TDLS_ENABLE_ACTIVE_EXTERNAL_CONTROL;
+
len = sizeof(*tlv) + sizeof(*cmd);
skb = ath10k_wmi_alloc_skb(ar, len);
if (!skb)
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.h b/drivers/net/wireless/ath/ath10k/wmi-tlv.h
index 22cf011..8fdb381 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.h
@@ -1641,6 +1641,15 @@ struct wmi_tlv_tx_pause_ev {
__le32 tid_map;
} __packed;
+struct wmi_tlv_tdls_peer_event {
+ struct wmi_mac_addr peer_macaddr;
+ __le32 peer_status;
+ __le32 peer_reason;
+ __le32 vdev_id;
+} __packed;
+
+
+
void ath10k_wmi_tlv_attach(struct ath10k *ar);
#endif
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 7a3606d..74a6c78 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -6720,6 +6720,7 @@ enum wmi_tdls_state {
WMI_TDLS_DISABLE,
WMI_TDLS_ENABLE_PASSIVE,
WMI_TDLS_ENABLE_ACTIVE,
+ WMI_TDLS_ENABLE_ACTIVE_EXTERNAL_CONTROL,
};
enum wmi_tdls_peer_state {
--
1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: <yintang@qti.qualcomm.com>
To: ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org
Subject: [PATCH V6 3/5] ath10k: Enable TDLS peer inactivity detection
Date: Mon, 16 Oct 2017 14:00:31 +0800 [thread overview]
Message-ID: <1508133633-23214-4-git-send-email-yintang@qti.qualcomm.com> (raw)
In-Reply-To: <1508133633-23214-1-git-send-email-yintang@qti.qualcomm.com>
From: Yingying Tang <yintang@qti.qualcomm.com>
Enable TDLS peer inactivity detetion feature.
QCA6174 firmware(version: WLAN.RM.4.4) support TDLS link inactivity detecting.
Set related parameters in TDLS WMI command to enable this feature.
Signed-off-by: Yingying Tang <yintang@qti.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/wmi-tlv.c | 52 +++++++++++++++++++++++++++++
drivers/net/wireless/ath/ath10k/wmi-tlv.h | 9 +++++
drivers/net/wireless/ath/ath10k/wmi.h | 1 +
3 files changed, 62 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index f60b46e..63bb2c4 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -412,6 +412,49 @@ static int ath10k_wmi_tlv_event_tx_pause(struct ath10k *ar,
return 0;
}
+void ath10k_wmi_event_tdls_peer(struct ath10k *ar, struct sk_buff *skb)
+{
+ struct ieee80211_sta *station;
+ const struct wmi_tlv_tdls_peer_event *ev;
+ const void **tb;
+ struct ath10k_vif *arvif;
+
+ tb = ath10k_wmi_tlv_parse_alloc(ar, skb->data, skb->len, GFP_ATOMIC);
+ if (IS_ERR(tb)) {
+ ath10k_warn(ar, "tdls peer failed to parse tlv");
+ return;
+ }
+ ev = tb[WMI_TLV_TAG_STRUCT_TDLS_PEER_EVENT];
+ if (!ev) {
+ kfree(tb);
+ ath10k_warn(ar, "tdls peer NULL event");
+ return;
+ }
+
+ switch (ev->peer_reason) {
+ case WMI_TDLS_TEARDOWN_REASON_TX:
+ case WMI_TDLS_TEARDOWN_REASON_RSSI:
+ case WMI_TDLS_TEARDOWN_REASON_PTR_TIMEOUT:
+ station = ieee80211_find_sta_by_ifaddr(ar->hw,
+ ev->peer_macaddr.addr,
+ NULL);
+ if (!station) {
+ ath10k_warn(ar, "did not find station from tdls peer event");
+ kfree(tb);
+ return;
+ }
+ arvif = ath10k_get_arvif(ar, ev->vdev_id);
+ ieee80211_tdls_oper_request(
+ arvif->vif, station->addr,
+ NL80211_TDLS_TEARDOWN,
+ WLAN_REASON_TDLS_TEARDOWN_UNREACHABLE,
+ GFP_ATOMIC
+ );
+ break;
+ }
+ kfree(tb);
+}
+
/***********/
/* TLV ops */
/***********/
@@ -552,6 +595,9 @@ static void ath10k_wmi_tlv_op_rx(struct ath10k *ar, struct sk_buff *skb)
case WMI_TLV_TX_PAUSE_EVENTID:
ath10k_wmi_tlv_event_tx_pause(ar, skb);
break;
+ case WMI_TLV_TDLS_PEER_EVENTID:
+ ath10k_wmi_event_tdls_peer(ar, skb);
+ break;
default:
ath10k_warn(ar, "Unknown eventid: %d\n", id);
break;
@@ -2750,6 +2796,12 @@ static void *ath10k_wmi_tlv_put_wmm(void *ptr,
if (test_bit(WMI_SERVICE_TDLS_UAPSD_BUFFER_STA, ar->wmi.svc_map))
options |= WMI_TLV_TDLS_BUFFER_STA_EN;
+ /* WMI_TDLS_ENABLE_ACTIVE_EXTERNAL_CONTROL means firm will handle TDLS
+ * link inactivity detecting logic.
+ */
+ if (state == WMI_TDLS_ENABLE_ACTIVE)
+ state = WMI_TDLS_ENABLE_ACTIVE_EXTERNAL_CONTROL;
+
len = sizeof(*tlv) + sizeof(*cmd);
skb = ath10k_wmi_alloc_skb(ar, len);
if (!skb)
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.h b/drivers/net/wireless/ath/ath10k/wmi-tlv.h
index 22cf011..8fdb381 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.h
@@ -1641,6 +1641,15 @@ struct wmi_tlv_tx_pause_ev {
__le32 tid_map;
} __packed;
+struct wmi_tlv_tdls_peer_event {
+ struct wmi_mac_addr peer_macaddr;
+ __le32 peer_status;
+ __le32 peer_reason;
+ __le32 vdev_id;
+} __packed;
+
+
+
void ath10k_wmi_tlv_attach(struct ath10k *ar);
#endif
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 7a3606d..74a6c78 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -6720,6 +6720,7 @@ enum wmi_tdls_state {
WMI_TDLS_DISABLE,
WMI_TDLS_ENABLE_PASSIVE,
WMI_TDLS_ENABLE_ACTIVE,
+ WMI_TDLS_ENABLE_ACTIVE_EXTERNAL_CONTROL,
};
enum wmi_tdls_peer_state {
--
1.7.9.5
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
next prev parent reply other threads:[~2017-10-16 5:58 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <TDLS for ath10k patches V6>
2017-10-16 6:00 ` [PATCH V6 0/5] Add TDLS feature for ath10k yintang
2017-10-16 6:00 ` yintang
2017-10-16 6:00 ` [PATCH V6 1/5] mac80211: Enable TDLS peer buffer STA feature yintang
2017-10-16 6:00 ` yintang
2017-10-18 10:35 ` Johannes Berg
2017-10-18 10:35 ` Johannes Berg
2017-10-20 3:34 ` Yingying Tang
2017-10-20 3:34 ` Yingying Tang
2017-10-23 6:29 ` Johannes Berg
2017-10-23 6:29 ` Johannes Berg
2017-10-16 6:00 ` [PATCH V6 2/5] ath10k: " yintang
2017-10-16 6:00 ` yintang
2017-10-16 6:00 ` yintang [this message]
2017-10-16 6:00 ` [PATCH V6 3/5] ath10k: Enable TDLS peer inactivity detection yintang
2017-10-16 6:00 ` [PATCH V6 4/5] ath10k: Avoid to set WEP key for TDLS peer yintang
2017-10-16 6:00 ` yintang
2017-10-18 23:37 ` [PATCH V6 0/5] Add TDLS feature for ath10k Peter Oh
2017-10-18 23:37 ` Peter Oh
2017-10-16 6:01 ` [PATCH V6 5/5] ath10k: Fix TDLS peer TX data failure issue on encryped AP yintang
2017-10-16 6:01 ` yintang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1508133633-23214-4-git-send-email-yintang@qti.qualcomm.com \
--to=yintang@qti.qualcomm.com \
--cc=ath10k@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.