From: Stefan Riedmueller <s.riedmueller-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org> To: shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org, fabio.estevam-3arQi8VN3Tc@public.gmane.org Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, mark.rutland-5wv7dgnIgG8@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, Enrico Scholz <enrico.scholz-wttK6gPy29v+Hn7q9Vec/7NAH6kLmebB@public.gmane.org>, Stefan Lengfeld <s.lengfeld-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org>, Christian Hemp <c.hemp-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org>, Stefan Riedmueller <s.riedmueller-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org> Subject: [PATCH v5 5/6] ARM: dts: imx6: Add support for phyBOARD-Mira with i.MX 6QuadPlus Date: Tue, 9 Jan 2018 17:09:59 +0100 [thread overview] Message-ID: <1515514200-9801-6-git-send-email-s.riedmueller@phytec.de> (raw) In-Reply-To: <1515514200-9801-1-git-send-email-s.riedmueller-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org> From: Enrico Scholz <enrico.scholz-wttK6gPy29v+Hn7q9Vec/7NAH6kLmebB@public.gmane.org> Add support for the PHYTEC phyBOARD-Mira with i.MX 6QuadPlus with NAND. It is based on the phyBOARD-Mira with i.MX 6Quad/Dual and supports the same interfaces. Signed-off-by: Enrico Scholz <enrico.scholz-wttK6gPy29v+Hn7q9Vec/7NAH6kLmebB@public.gmane.org> Signed-off-by: Stefan Lengfeld <s.lengfeld-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org> Signed-off-by: Christian Hemp <c.hemp-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org> Signed-off-by: Stefan Riedmueller <s.riedmueller-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org> Reviewed-by: Fabio Estevam <fabio.estevam-3arQi8VN3Tc@public.gmane.org> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts | 72 +++++++++++++++++++++++ 2 files changed, 73 insertions(+) create mode 100644 arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 07d99a1..d42b522 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -479,6 +479,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-zii-rdu2.dtb \ imx6qp-nitrogen6_max.dtb \ imx6qp-nitrogen6_som2.dtb \ + imx6qp-phytec-mira-rdk-nand.dtb \ imx6qp-sabreauto.dtb \ imx6qp-sabresd.dtb \ imx6qp-tx6qp-8037.dtb \ diff --git a/arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts b/arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts new file mode 100644 index 0000000..3618e53 --- /dev/null +++ b/arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts @@ -0,0 +1,72 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2018 PHYTEC Messtechnik GmbH + * Author: Enrico Scholz <enrico.scholz-wttK6gPy29v+Hn7q9Vec/7NAH6kLmebB@public.gmane.org> + */ + +/dts-v1/; +#include "imx6qp.dtsi" +#include "imx6qdl-phytec-phycore-som.dtsi" +#include "imx6qdl-phytec-mira.dtsi" + +/ { + model = "PHYTEC phyBOARD-Mira QuadPlus Carrier-Board with NAND"; + compatible = "phytec,imx6qp-pbac06-nand", "phytec,imx6qp-pbac06", + "phytec,imx6qdl-pcm058", "fsl,imx6qp"; + + chosen { + linux,stdout-path = &uart2; + }; +}; + +&can1 { + status = "okay"; +}; + +&fec { + status = "okay"; +}; + +&gpmi { + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c_rtc { + status = "okay"; +}; + +&m25p80 { + status = "okay"; +}; + +&pcie { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usbotg { + status = "okay"; +}; + +&usdhc1 { + status = "okay"; +}; -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: s.riedmueller@phytec.de (Stefan Riedmueller) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v5 5/6] ARM: dts: imx6: Add support for phyBOARD-Mira with i.MX 6QuadPlus Date: Tue, 9 Jan 2018 17:09:59 +0100 [thread overview] Message-ID: <1515514200-9801-6-git-send-email-s.riedmueller@phytec.de> (raw) In-Reply-To: <1515514200-9801-1-git-send-email-s.riedmueller@phytec.de> From: Enrico Scholz <enrico.scholz@sigma-chemnitz.de> Add support for the PHYTEC phyBOARD-Mira with i.MX 6QuadPlus with NAND. It is based on the phyBOARD-Mira with i.MX 6Quad/Dual and supports the same interfaces. Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de> Signed-off-by: Stefan Lengfeld <s.lengfeld@phytec.de> Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts | 72 +++++++++++++++++++++++ 2 files changed, 73 insertions(+) create mode 100644 arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 07d99a1..d42b522 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -479,6 +479,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-zii-rdu2.dtb \ imx6qp-nitrogen6_max.dtb \ imx6qp-nitrogen6_som2.dtb \ + imx6qp-phytec-mira-rdk-nand.dtb \ imx6qp-sabreauto.dtb \ imx6qp-sabresd.dtb \ imx6qp-tx6qp-8037.dtb \ diff --git a/arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts b/arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts new file mode 100644 index 0000000..3618e53 --- /dev/null +++ b/arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts @@ -0,0 +1,72 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2018 PHYTEC Messtechnik GmbH + * Author: Enrico Scholz <enrico.scholz@sigma-chemnitz.de> + */ + +/dts-v1/; +#include "imx6qp.dtsi" +#include "imx6qdl-phytec-phycore-som.dtsi" +#include "imx6qdl-phytec-mira.dtsi" + +/ { + model = "PHYTEC phyBOARD-Mira QuadPlus Carrier-Board with NAND"; + compatible = "phytec,imx6qp-pbac06-nand", "phytec,imx6qp-pbac06", + "phytec,imx6qdl-pcm058", "fsl,imx6qp"; + + chosen { + linux,stdout-path = &uart2; + }; +}; + +&can1 { + status = "okay"; +}; + +&fec { + status = "okay"; +}; + +&gpmi { + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c_rtc { + status = "okay"; +}; + +&m25p80 { + status = "okay"; +}; + +&pcie { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usbotg { + status = "okay"; +}; + +&usdhc1 { + status = "okay"; +}; -- 2.7.4
next prev parent reply other threads:[~2018-01-09 16:09 UTC|newest] Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-01-09 16:09 [PATCH v5 0/6] ARM: dts: Add PHYTEC phyCORE-i.MX 6 and phyBOARD-Mira carrier board support Stefan Riedmueller 2018-01-09 16:09 ` Stefan Riedmueller [not found] ` <1515514200-9801-1-git-send-email-s.riedmueller-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org> 2018-01-09 16:09 ` [PATCH v5 1/6] ARM: dts: imx6: Add initial support for phyCORE-i.MX 6 SOM Stefan Riedmueller 2018-01-09 16:09 ` Stefan Riedmueller 2018-01-09 16:09 ` [PATCH v5 2/6] ARM: dts: imx6: Add initial support for phyBOARD-Mira Stefan Riedmueller 2018-01-09 16:09 ` Stefan Riedmueller 2018-01-09 16:09 ` [PATCH v5 3/6] ARM: dts: imx6: Add support for phyBOARD-Mira i.MX 6Quad/Dual RDK Stefan Riedmueller 2018-01-09 16:09 ` Stefan Riedmueller 2018-01-09 16:09 ` [PATCH v5 4/6] ARM: dts: imx6: Add support for phyBOARD-Mira i.MX 6 DualLight/Solo RDK Stefan Riedmueller 2018-01-09 16:09 ` Stefan Riedmueller 2018-01-09 16:09 ` Stefan Riedmueller [this message] 2018-01-09 16:09 ` [PATCH v5 5/6] ARM: dts: imx6: Add support for phyBOARD-Mira with i.MX 6QuadPlus Stefan Riedmueller 2018-01-09 16:10 ` [PATCH v5 6/6] ARM: imx_v6_v7_defconfig: Enable Dialog Semiconductor DA9062 driver Stefan Riedmueller 2018-01-09 16:10 ` Stefan Riedmueller 2018-01-22 10:28 ` [PATCH v5 0/6] ARM: dts: Add PHYTEC phyCORE-i.MX 6 and phyBOARD-Mira carrier board support Stefan Riedmüller 2018-01-22 10:28 ` Stefan Riedmüller 2018-02-02 6:06 ` Shawn Guo 2018-02-02 6:06 ` Shawn Guo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1515514200-9801-6-git-send-email-s.riedmueller@phytec.de \ --to=s.riedmueller-gut5v/wyfqezqb+pc5nmwq@public.gmane.org \ --cc=c.hemp-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org \ --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \ --cc=enrico.scholz-wttK6gPy29v+Hn7q9Vec/7NAH6kLmebB@public.gmane.org \ --cc=fabio.estevam-3arQi8VN3Tc@public.gmane.org \ --cc=kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \ --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \ --cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \ --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \ --cc=s.lengfeld-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org \ --cc=shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.