From: Eugen Hristev <eugen.hristev@microchip.com>
To: <jic23@kernel.org>, <ludovic.desroches@microchip.com>,
<alexandre.belloni@bootlin.com>,
<linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-iio@vger.kernel.org>, <linux-input@vger.kernel.org>,
<nicolas.ferre@microchip.com>, <dmitry.torokhov@gmail.com>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Subject: [PATCH v2 10/10] ARM: dts: at91: sama5d2: Add resistive touch device
Date: Tue, 27 Mar 2018 15:32:43 +0300 [thread overview]
Message-ID: <1522153963-1121-11-git-send-email-eugen.hristev@microchip.com> (raw)
In-Reply-To: <1522153963-1121-1-git-send-email-eugen.hristev@microchip.com>
Add generic resistive touch device which is connected to ADC block
inside the SAMA5D2 SoC
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
---
Changes in v2:
- now added a generic resistive touchscreen node instead of architecture
specific
arch/arm/boot/dts/sama5d2.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index f06ba99..0d87dc0 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -1442,6 +1442,16 @@
status = "disabled";
};
+ resistive_touch: resistive-touch {
+ compatible = "generic-resistive-adc-touch";
+ io-channels = <&adc AT91_SAMA5D2_ADC_X_CHANNEL>,
+ <&adc AT91_SAMA5D2_ADC_Y_CHANNEL>,
+ <&adc AT91_SAMA5D2_ADC_P_CHANNEL>;
+ io-channel-names = "x", "y", "pressure";
+ generic-resistive-adc-touch,pressure-threshold = <10000>;
+ status = "disabled";
+ };
+
pioA: pinctrl@fc038000 {
compatible = "atmel,sama5d2-pinctrl";
reg = <0xfc038000 0x600>;
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Eugen Hristev <eugen.hristev@microchip.com>
To: jic23@kernel.org, ludovic.desroches@microchip.com,
alexandre.belloni@bootlin.com,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-iio@vger.kernel.org,
linux-input@vger.kernel.org, nicolas.ferre@microchip.com,
dmitry.torokhov@gmail.com
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Subject: [PATCH v2 10/10] ARM: dts: at91: sama5d2: Add resistive touch device
Date: Tue, 27 Mar 2018 15:32:43 +0300 [thread overview]
Message-ID: <1522153963-1121-11-git-send-email-eugen.hristev@microchip.com> (raw)
In-Reply-To: <1522153963-1121-1-git-send-email-eugen.hristev@microchip.com>
Add generic resistive touch device which is connected to ADC block
inside the SAMA5D2 SoC
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
---
Changes in v2:
- now added a generic resistive touchscreen node instead of architecture
specific
arch/arm/boot/dts/sama5d2.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index f06ba99..0d87dc0 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -1442,6 +1442,16 @@
status = "disabled";
};
+ resistive_touch: resistive-touch {
+ compatible = "generic-resistive-adc-touch";
+ io-channels = <&adc AT91_SAMA5D2_ADC_X_CHANNEL>,
+ <&adc AT91_SAMA5D2_ADC_Y_CHANNEL>,
+ <&adc AT91_SAMA5D2_ADC_P_CHANNEL>;
+ io-channel-names = "x", "y", "pressure";
+ generic-resistive-adc-touch,pressure-threshold = <10000>;
+ status = "disabled";
+ };
+
pioA: pinctrl@fc038000 {
compatible = "atmel,sama5d2-pinctrl";
reg = <0xfc038000 0x600>;
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: eugen.hristev@microchip.com (Eugen Hristev)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 10/10] ARM: dts: at91: sama5d2: Add resistive touch device
Date: Tue, 27 Mar 2018 15:32:43 +0300 [thread overview]
Message-ID: <1522153963-1121-11-git-send-email-eugen.hristev@microchip.com> (raw)
In-Reply-To: <1522153963-1121-1-git-send-email-eugen.hristev@microchip.com>
Add generic resistive touch device which is connected to ADC block
inside the SAMA5D2 SoC
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
---
Changes in v2:
- now added a generic resistive touchscreen node instead of architecture
specific
arch/arm/boot/dts/sama5d2.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index f06ba99..0d87dc0 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -1442,6 +1442,16 @@
status = "disabled";
};
+ resistive_touch: resistive-touch {
+ compatible = "generic-resistive-adc-touch";
+ io-channels = <&adc AT91_SAMA5D2_ADC_X_CHANNEL>,
+ <&adc AT91_SAMA5D2_ADC_Y_CHANNEL>,
+ <&adc AT91_SAMA5D2_ADC_P_CHANNEL>;
+ io-channel-names = "x", "y", "pressure";
+ generic-resistive-adc-touch,pressure-threshold = <10000>;
+ status = "disabled";
+ };
+
pioA: pinctrl at fc038000 {
compatible = "atmel,sama5d2-pinctrl";
reg = <0xfc038000 0x600>;
--
2.7.4
next prev parent reply other threads:[~2018-03-27 12:35 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-27 12:32 [PATCH v2 00/10] Add support for SAMA5D2 touchscreen Eugen Hristev
2018-03-27 12:32 ` Eugen Hristev
2018-03-27 12:32 ` Eugen Hristev
2018-03-27 12:32 ` [PATCH v2 01/10] MAINTAINERS: add generic resistive touchscreen adc Eugen Hristev
2018-03-27 12:32 ` Eugen Hristev
2018-03-27 12:32 ` Eugen Hristev
2018-03-27 12:32 ` [PATCH v2 02/10] iio: Add channel for Position Relative Eugen Hristev
2018-03-27 12:32 ` Eugen Hristev
2018-03-27 12:32 ` Eugen Hristev
2018-03-27 12:32 ` [PATCH v2 03/10] dt-bindings: input: touchscreen: touch_adc: create bindings Eugen Hristev
2018-03-27 12:32 ` Eugen Hristev
2018-03-27 12:32 ` Eugen Hristev
2018-04-09 18:46 ` Rob Herring
2018-04-09 18:46 ` Rob Herring
2018-03-27 12:32 ` [PATCH v2 04/10] iio: inkern: add module put/get on iio dev module when requesting channels Eugen Hristev
2018-03-27 12:32 ` Eugen Hristev
2018-03-27 12:32 ` Eugen Hristev
2018-03-27 12:32 ` [PATCH v2 05/10] iio: adc: at91-sama5d2_adc: fix channel configuration for differential channels Eugen Hristev
2018-03-27 12:32 ` Eugen Hristev
2018-03-27 12:32 ` Eugen Hristev
2018-03-30 12:17 ` Jonathan Cameron
2018-03-30 12:17 ` Jonathan Cameron
2018-03-30 12:17 ` Jonathan Cameron
2018-03-27 12:32 ` [PATCH v2 06/10] iio: adc: at91-sama5d2_adc: add support for position and pressure channels Eugen Hristev
2018-03-27 12:32 ` Eugen Hristev
2018-03-27 12:32 ` Eugen Hristev
2018-03-30 12:47 ` Jonathan Cameron
2018-03-30 12:47 ` Jonathan Cameron
2018-03-30 12:47 ` Jonathan Cameron
2018-03-27 12:32 ` [PATCH v2 07/10] input: touchscreen: touch_adc: add generic resistive ADC touchscreen Eugen Hristev
2018-03-27 12:32 ` Eugen Hristev
2018-03-27 12:32 ` Eugen Hristev
2018-03-30 12:58 ` Jonathan Cameron
2018-03-30 12:58 ` Jonathan Cameron
2018-03-30 12:58 ` Jonathan Cameron
2018-03-30 18:09 ` Dmitry Torokhov
2018-03-30 18:09 ` Dmitry Torokhov
2018-04-06 15:13 ` Jonathan Cameron
2018-04-06 15:13 ` Jonathan Cameron
2018-04-06 15:13 ` Jonathan Cameron
2018-03-27 12:32 ` [PATCH v2 08/10] dt-bindings: iio: adc: at91-sama5d2_adc: add channel specific consumer info Eugen Hristev
2018-03-27 12:32 ` Eugen Hristev
2018-03-27 12:32 ` Eugen Hristev
2018-04-09 18:47 ` Rob Herring
2018-04-09 18:47 ` Rob Herring
2018-03-27 12:32 ` [PATCH v2 09/10] ARM: dts: at91: sama5d2: add channel cells for ADC device Eugen Hristev
2018-03-27 12:32 ` Eugen Hristev
2018-03-27 12:32 ` Eugen Hristev
2018-03-27 12:32 ` Eugen Hristev [this message]
2018-03-27 12:32 ` [PATCH v2 10/10] ARM: dts: at91: sama5d2: Add resistive touch device Eugen Hristev
2018-03-27 12:32 ` Eugen Hristev
2018-03-30 13:02 ` [PATCH v2 00/10] Add support for SAMA5D2 touchscreen Jonathan Cameron
2018-03-30 13:02 ` Jonathan Cameron
2018-03-30 13:02 ` Jonathan Cameron
2018-04-10 7:38 ` Quentin Schulz
2018-04-10 7:38 ` Quentin Schulz
2018-04-10 13:47 ` Jonathan Cameron
2018-04-10 13:47 ` Jonathan Cameron
2018-04-10 13:47 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1522153963-1121-11-git-send-email-eugen.hristev@microchip.com \
--to=eugen.hristev@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=jic23@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=ludovic.desroches@microchip.com \
--cc=nicolas.ferre@microchip.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.