From: Corentin Labbe <clabbe@baylibre.com>
To: Gilles.Muller@lip6.fr, Julia.Lawall@lip6.fr, agust@denx.de,
airlied@linux.ie, alexandre.torgue@st.com, alistair@popple.id.au,
benh@kernel.crashing.org, carlo@caione.org, davem@davemloft.net,
galak@kernel.crashing.org, joabreu@synopsys.com,
khilman@baylibre.com, maxime.ripard@bootlin.com,
michal.lkml@markovi.net, mpe@ellerman.id.au,
mporter@kernel.crashing.org, narmstrong@baylibre.com,
nicolas.palix@imag.fr, oss@buserror.net, paulus@samba.org,
peppe.cavallaro@st.com, tj@kernel.org, vitb@kernel.crashing.org,
wens@csie.org
Cc: cocci@systeme.lip6.fr, dri-devel@lists.freedesktop.org,
linux-amlogic@lists.infradead.org,
linux-arm-kernel@lists.infradead.org, linux-ide@vger.kernel.org,
linux-kernel@vger.kernel.org, linuxppc-dev@lists.ozlabs.org,
netdev@vger.kernel.org, Corentin Labbe <clabbe@baylibre.com>
Subject: [PATCH v2 2/7] include: add setbits32/clrbits32/clrsetbits32/setbits64/clrbits64/clrsetbits64 in linux/setbits.h
Date: Mon, 24 Sep 2018 19:04:11 +0000 [thread overview]
Message-ID: <1537815856-31728-3-git-send-email-clabbe@baylibre.com> (raw)
In-Reply-To: <1537815856-31728-1-git-send-email-clabbe@baylibre.com>
This patch adds setbits32/clrbits32/clrsetbits32 and
setbits64/clrbits64/clrsetbits64 in linux/setbits.h header.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
---
include/linux/setbits.h | 88 +++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 88 insertions(+)
create mode 100644 include/linux/setbits.h
diff --git a/include/linux/setbits.h b/include/linux/setbits.h
new file mode 100644
index 000000000000..6e7e257134ae
--- /dev/null
+++ b/include/linux/setbits.h
@@ -0,0 +1,88 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __LINUX_SETBITS_H
+#define __LINUX_SETBITS_H
+
+#include <linux/io.h>
+
+#define __setbits(readfunction, writefunction, addr, set) \
+ writefunction((readfunction(addr) | (set)), addr)
+#define __clrbits(readfunction, writefunction, addr, mask) \
+ writefunction((readfunction(addr) & ~(mask)), addr)
+#define __clrsetbits(readfunction, writefunction, addr, mask, set) \
+ writefunction(((readfunction(addr) & ~(mask)) | (set)), addr)
+#define __setclrbits(readfunction, writefunction, addr, mask, set) \
+ writefunction(((readfunction(addr) | (set)) & ~(mask)), addr)
+
+#ifndef setbits_le32
+#define setbits_le32(addr, set) __setbits(readl, writel, addr, set)
+#endif
+#ifndef setbits_le32_relaxed
+#define setbits_le32_relaxed(addr, set) __setbits(readl_relaxed, writel_relaxed, \
+ addr, set)
+#endif
+
+#ifndef clrbits_le32
+#define clrbits_le32(addr, mask) __clrbits(readl, writel, addr, mask)
+#endif
+#ifndef clrbits_le32_relaxed
+#define clrbits_le32_relaxed(addr, mask) __clrbits(readl_relaxed, writel_relaxed, \
+ addr, mask)
+#endif
+
+#ifndef clrsetbits_le32
+#define clrsetbits_le32(addr, mask, set) __clrsetbits(readl, writel, addr, mask, set)
+#endif
+#ifndef clrsetbits_le32_relaxed
+#define clrsetbits_le32_relaxed(addr, mask, set) __clrsetbits(readl_relaxed, \
+ writel_relaxed, \
+ addr, mask, set)
+#endif
+
+#ifndef setclrbits_le32
+#define setclrbits_le32(addr, mask, set) __setclrbits(readl, writel, addr, mask, set)
+#endif
+#ifndef setclrbits_le32_relaxed
+#define setclrbits_le32_relaxed(addr, mask, set) __setclrbits(readl_relaxed, \
+ writel_relaxed, \
+ addr, mask, set)
+#endif
+
+/* We cannot use CONFIG_64BIT as some x86 drivers use non-atomicwriteq() */
+#if defined(writeq) && defined(readq)
+#ifndef setbits_le64
+#define setbits_le64(addr, set) __setbits(readq, writeq, addr, set)
+#endif
+#ifndef setbits_le64_relaxed
+#define setbits_le64_relaxed(addr, set) __setbits(readq_relaxed, writeq_relaxed, \
+ addr, set)
+#endif
+
+#ifndef clrbits_le64
+#define clrbits_le64(addr, mask) __clrbits(readq, writeq, addr, mask)
+#endif
+#ifndef clrbits_le64_relaxed
+#define clrbits_le64_relaxed(addr, mask) __clrbits(readq_relaxed, writeq_relaxed, \
+ addr, mask)
+#endif
+
+#ifndef clrsetbits_le64
+#define clrsetbits_le64(addr, mask, set) __clrsetbits(readq, writeq, addr, mask, set)
+#endif
+#ifndef clrsetbits_le64_relaxed
+#define clrsetbits_le64_relaxed(addr, mask, set) __clrsetbits(readq_relaxed, \
+ writeq_relaxed, \
+ addr, mask, set)
+#endif
+
+#ifndef setclrbits_le64
+#define setclrbits_le64(addr, mask, set) __setclrbits(readq, writeq, addr, mask, set)
+#endif
+#ifndef setclrbits_le64_relaxed
+#define setclrbits_le64_relaxed(addr, mask, set) __setclrbits(readq_relaxed, \
+ writeq_relaxed, \
+ addr, mask, set)
+#endif
+
+#endif /* writeq/readq */
+
+#endif /* __LINUX_SETBITS_H */
--
2.16.4
WARNING: multiple messages have this Message-ID (diff)
From: clabbe@baylibre.com (Corentin Labbe)
To: cocci@systeme.lip6.fr
Subject: [Cocci] [PATCH v2 2/7] include: add setbits32/clrbits32/clrsetbits32/setbits64/clrbits64/clrsetbits64 in linux/setbits.h
Date: Mon, 24 Sep 2018 19:04:11 +0000 [thread overview]
Message-ID: <1537815856-31728-3-git-send-email-clabbe@baylibre.com> (raw)
In-Reply-To: <1537815856-31728-1-git-send-email-clabbe@baylibre.com>
This patch adds setbits32/clrbits32/clrsetbits32 and
setbits64/clrbits64/clrsetbits64 in linux/setbits.h header.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
---
include/linux/setbits.h | 88 +++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 88 insertions(+)
create mode 100644 include/linux/setbits.h
diff --git a/include/linux/setbits.h b/include/linux/setbits.h
new file mode 100644
index 000000000000..6e7e257134ae
--- /dev/null
+++ b/include/linux/setbits.h
@@ -0,0 +1,88 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __LINUX_SETBITS_H
+#define __LINUX_SETBITS_H
+
+#include <linux/io.h>
+
+#define __setbits(readfunction, writefunction, addr, set) \
+ writefunction((readfunction(addr) | (set)), addr)
+#define __clrbits(readfunction, writefunction, addr, mask) \
+ writefunction((readfunction(addr) & ~(mask)), addr)
+#define __clrsetbits(readfunction, writefunction, addr, mask, set) \
+ writefunction(((readfunction(addr) & ~(mask)) | (set)), addr)
+#define __setclrbits(readfunction, writefunction, addr, mask, set) \
+ writefunction(((readfunction(addr) | (set)) & ~(mask)), addr)
+
+#ifndef setbits_le32
+#define setbits_le32(addr, set) __setbits(readl, writel, addr, set)
+#endif
+#ifndef setbits_le32_relaxed
+#define setbits_le32_relaxed(addr, set) __setbits(readl_relaxed, writel_relaxed, \
+ addr, set)
+#endif
+
+#ifndef clrbits_le32
+#define clrbits_le32(addr, mask) __clrbits(readl, writel, addr, mask)
+#endif
+#ifndef clrbits_le32_relaxed
+#define clrbits_le32_relaxed(addr, mask) __clrbits(readl_relaxed, writel_relaxed, \
+ addr, mask)
+#endif
+
+#ifndef clrsetbits_le32
+#define clrsetbits_le32(addr, mask, set) __clrsetbits(readl, writel, addr, mask, set)
+#endif
+#ifndef clrsetbits_le32_relaxed
+#define clrsetbits_le32_relaxed(addr, mask, set) __clrsetbits(readl_relaxed, \
+ writel_relaxed, \
+ addr, mask, set)
+#endif
+
+#ifndef setclrbits_le32
+#define setclrbits_le32(addr, mask, set) __setclrbits(readl, writel, addr, mask, set)
+#endif
+#ifndef setclrbits_le32_relaxed
+#define setclrbits_le32_relaxed(addr, mask, set) __setclrbits(readl_relaxed, \
+ writel_relaxed, \
+ addr, mask, set)
+#endif
+
+/* We cannot use CONFIG_64BIT as some x86 drivers use non-atomicwriteq() */
+#if defined(writeq) && defined(readq)
+#ifndef setbits_le64
+#define setbits_le64(addr, set) __setbits(readq, writeq, addr, set)
+#endif
+#ifndef setbits_le64_relaxed
+#define setbits_le64_relaxed(addr, set) __setbits(readq_relaxed, writeq_relaxed, \
+ addr, set)
+#endif
+
+#ifndef clrbits_le64
+#define clrbits_le64(addr, mask) __clrbits(readq, writeq, addr, mask)
+#endif
+#ifndef clrbits_le64_relaxed
+#define clrbits_le64_relaxed(addr, mask) __clrbits(readq_relaxed, writeq_relaxed, \
+ addr, mask)
+#endif
+
+#ifndef clrsetbits_le64
+#define clrsetbits_le64(addr, mask, set) __clrsetbits(readq, writeq, addr, mask, set)
+#endif
+#ifndef clrsetbits_le64_relaxed
+#define clrsetbits_le64_relaxed(addr, mask, set) __clrsetbits(readq_relaxed, \
+ writeq_relaxed, \
+ addr, mask, set)
+#endif
+
+#ifndef setclrbits_le64
+#define setclrbits_le64(addr, mask, set) __setclrbits(readq, writeq, addr, mask, set)
+#endif
+#ifndef setclrbits_le64_relaxed
+#define setclrbits_le64_relaxed(addr, mask, set) __setclrbits(readq_relaxed, \
+ writeq_relaxed, \
+ addr, mask, set)
+#endif
+
+#endif /* writeq/readq */
+
+#endif /* __LINUX_SETBITS_H */
--
2.16.4
WARNING: multiple messages have this Message-ID (diff)
From: clabbe@baylibre.com (Corentin Labbe)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 2/7] include: add setbits32/clrbits32/clrsetbits32/setbits64/clrbits64/clrsetbits64 in linux/setbits.h
Date: Mon, 24 Sep 2018 19:04:11 +0000 [thread overview]
Message-ID: <1537815856-31728-3-git-send-email-clabbe@baylibre.com> (raw)
In-Reply-To: <1537815856-31728-1-git-send-email-clabbe@baylibre.com>
This patch adds setbits32/clrbits32/clrsetbits32 and
setbits64/clrbits64/clrsetbits64 in linux/setbits.h header.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
---
include/linux/setbits.h | 88 +++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 88 insertions(+)
create mode 100644 include/linux/setbits.h
diff --git a/include/linux/setbits.h b/include/linux/setbits.h
new file mode 100644
index 000000000000..6e7e257134ae
--- /dev/null
+++ b/include/linux/setbits.h
@@ -0,0 +1,88 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __LINUX_SETBITS_H
+#define __LINUX_SETBITS_H
+
+#include <linux/io.h>
+
+#define __setbits(readfunction, writefunction, addr, set) \
+ writefunction((readfunction(addr) | (set)), addr)
+#define __clrbits(readfunction, writefunction, addr, mask) \
+ writefunction((readfunction(addr) & ~(mask)), addr)
+#define __clrsetbits(readfunction, writefunction, addr, mask, set) \
+ writefunction(((readfunction(addr) & ~(mask)) | (set)), addr)
+#define __setclrbits(readfunction, writefunction, addr, mask, set) \
+ writefunction(((readfunction(addr) | (set)) & ~(mask)), addr)
+
+#ifndef setbits_le32
+#define setbits_le32(addr, set) __setbits(readl, writel, addr, set)
+#endif
+#ifndef setbits_le32_relaxed
+#define setbits_le32_relaxed(addr, set) __setbits(readl_relaxed, writel_relaxed, \
+ addr, set)
+#endif
+
+#ifndef clrbits_le32
+#define clrbits_le32(addr, mask) __clrbits(readl, writel, addr, mask)
+#endif
+#ifndef clrbits_le32_relaxed
+#define clrbits_le32_relaxed(addr, mask) __clrbits(readl_relaxed, writel_relaxed, \
+ addr, mask)
+#endif
+
+#ifndef clrsetbits_le32
+#define clrsetbits_le32(addr, mask, set) __clrsetbits(readl, writel, addr, mask, set)
+#endif
+#ifndef clrsetbits_le32_relaxed
+#define clrsetbits_le32_relaxed(addr, mask, set) __clrsetbits(readl_relaxed, \
+ writel_relaxed, \
+ addr, mask, set)
+#endif
+
+#ifndef setclrbits_le32
+#define setclrbits_le32(addr, mask, set) __setclrbits(readl, writel, addr, mask, set)
+#endif
+#ifndef setclrbits_le32_relaxed
+#define setclrbits_le32_relaxed(addr, mask, set) __setclrbits(readl_relaxed, \
+ writel_relaxed, \
+ addr, mask, set)
+#endif
+
+/* We cannot use CONFIG_64BIT as some x86 drivers use non-atomicwriteq() */
+#if defined(writeq) && defined(readq)
+#ifndef setbits_le64
+#define setbits_le64(addr, set) __setbits(readq, writeq, addr, set)
+#endif
+#ifndef setbits_le64_relaxed
+#define setbits_le64_relaxed(addr, set) __setbits(readq_relaxed, writeq_relaxed, \
+ addr, set)
+#endif
+
+#ifndef clrbits_le64
+#define clrbits_le64(addr, mask) __clrbits(readq, writeq, addr, mask)
+#endif
+#ifndef clrbits_le64_relaxed
+#define clrbits_le64_relaxed(addr, mask) __clrbits(readq_relaxed, writeq_relaxed, \
+ addr, mask)
+#endif
+
+#ifndef clrsetbits_le64
+#define clrsetbits_le64(addr, mask, set) __clrsetbits(readq, writeq, addr, mask, set)
+#endif
+#ifndef clrsetbits_le64_relaxed
+#define clrsetbits_le64_relaxed(addr, mask, set) __clrsetbits(readq_relaxed, \
+ writeq_relaxed, \
+ addr, mask, set)
+#endif
+
+#ifndef setclrbits_le64
+#define setclrbits_le64(addr, mask, set) __setclrbits(readq, writeq, addr, mask, set)
+#endif
+#ifndef setclrbits_le64_relaxed
+#define setclrbits_le64_relaxed(addr, mask, set) __setclrbits(readq_relaxed, \
+ writeq_relaxed, \
+ addr, mask, set)
+#endif
+
+#endif /* writeq/readq */
+
+#endif /* __LINUX_SETBITS_H */
--
2.16.4
WARNING: multiple messages have this Message-ID (diff)
From: clabbe@baylibre.com (Corentin Labbe)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH v2 2/7] include: add setbits32/clrbits32/clrsetbits32/setbits64/clrbits64/clrsetbits64 in linux/setbits.h
Date: Mon, 24 Sep 2018 19:04:11 +0000 [thread overview]
Message-ID: <1537815856-31728-3-git-send-email-clabbe@baylibre.com> (raw)
In-Reply-To: <1537815856-31728-1-git-send-email-clabbe@baylibre.com>
This patch adds setbits32/clrbits32/clrsetbits32 and
setbits64/clrbits64/clrsetbits64 in linux/setbits.h header.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
---
include/linux/setbits.h | 88 +++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 88 insertions(+)
create mode 100644 include/linux/setbits.h
diff --git a/include/linux/setbits.h b/include/linux/setbits.h
new file mode 100644
index 000000000000..6e7e257134ae
--- /dev/null
+++ b/include/linux/setbits.h
@@ -0,0 +1,88 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __LINUX_SETBITS_H
+#define __LINUX_SETBITS_H
+
+#include <linux/io.h>
+
+#define __setbits(readfunction, writefunction, addr, set) \
+ writefunction((readfunction(addr) | (set)), addr)
+#define __clrbits(readfunction, writefunction, addr, mask) \
+ writefunction((readfunction(addr) & ~(mask)), addr)
+#define __clrsetbits(readfunction, writefunction, addr, mask, set) \
+ writefunction(((readfunction(addr) & ~(mask)) | (set)), addr)
+#define __setclrbits(readfunction, writefunction, addr, mask, set) \
+ writefunction(((readfunction(addr) | (set)) & ~(mask)), addr)
+
+#ifndef setbits_le32
+#define setbits_le32(addr, set) __setbits(readl, writel, addr, set)
+#endif
+#ifndef setbits_le32_relaxed
+#define setbits_le32_relaxed(addr, set) __setbits(readl_relaxed, writel_relaxed, \
+ addr, set)
+#endif
+
+#ifndef clrbits_le32
+#define clrbits_le32(addr, mask) __clrbits(readl, writel, addr, mask)
+#endif
+#ifndef clrbits_le32_relaxed
+#define clrbits_le32_relaxed(addr, mask) __clrbits(readl_relaxed, writel_relaxed, \
+ addr, mask)
+#endif
+
+#ifndef clrsetbits_le32
+#define clrsetbits_le32(addr, mask, set) __clrsetbits(readl, writel, addr, mask, set)
+#endif
+#ifndef clrsetbits_le32_relaxed
+#define clrsetbits_le32_relaxed(addr, mask, set) __clrsetbits(readl_relaxed, \
+ writel_relaxed, \
+ addr, mask, set)
+#endif
+
+#ifndef setclrbits_le32
+#define setclrbits_le32(addr, mask, set) __setclrbits(readl, writel, addr, mask, set)
+#endif
+#ifndef setclrbits_le32_relaxed
+#define setclrbits_le32_relaxed(addr, mask, set) __setclrbits(readl_relaxed, \
+ writel_relaxed, \
+ addr, mask, set)
+#endif
+
+/* We cannot use CONFIG_64BIT as some x86 drivers use non-atomicwriteq() */
+#if defined(writeq) && defined(readq)
+#ifndef setbits_le64
+#define setbits_le64(addr, set) __setbits(readq, writeq, addr, set)
+#endif
+#ifndef setbits_le64_relaxed
+#define setbits_le64_relaxed(addr, set) __setbits(readq_relaxed, writeq_relaxed, \
+ addr, set)
+#endif
+
+#ifndef clrbits_le64
+#define clrbits_le64(addr, mask) __clrbits(readq, writeq, addr, mask)
+#endif
+#ifndef clrbits_le64_relaxed
+#define clrbits_le64_relaxed(addr, mask) __clrbits(readq_relaxed, writeq_relaxed, \
+ addr, mask)
+#endif
+
+#ifndef clrsetbits_le64
+#define clrsetbits_le64(addr, mask, set) __clrsetbits(readq, writeq, addr, mask, set)
+#endif
+#ifndef clrsetbits_le64_relaxed
+#define clrsetbits_le64_relaxed(addr, mask, set) __clrsetbits(readq_relaxed, \
+ writeq_relaxed, \
+ addr, mask, set)
+#endif
+
+#ifndef setclrbits_le64
+#define setclrbits_le64(addr, mask, set) __setclrbits(readq, writeq, addr, mask, set)
+#endif
+#ifndef setclrbits_le64_relaxed
+#define setclrbits_le64_relaxed(addr, mask, set) __setclrbits(readq_relaxed, \
+ writeq_relaxed, \
+ addr, mask, set)
+#endif
+
+#endif /* writeq/readq */
+
+#endif /* __LINUX_SETBITS_H */
--
2.16.4
next prev parent reply other threads:[~2018-09-24 19:04 UTC|newest]
Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-24 19:04 [PATCH v2 0/7] include: add setbits32/clrbits32/clrsetbits32/setbits64/clrbits64/clrsetbits64 Corentin Labbe
2018-09-24 19:04 ` Corentin Labbe
2018-09-24 19:04 ` Corentin Labbe
2018-09-24 19:04 ` [Cocci] " Corentin Labbe
2018-09-24 19:04 ` [PATCH v2 1/7] powerpc: rename setbits32/clrbits32 to setbits32_be/clrbits32_be Corentin Labbe
2018-09-24 19:04 ` Corentin Labbe
2018-09-24 19:04 ` Corentin Labbe
2018-09-24 19:04 ` [Cocci] " Corentin Labbe
2018-09-25 4:56 ` Christophe LEROY
2018-09-25 4:56 ` Christophe LEROY
2018-09-25 4:56 ` Christophe LEROY
2018-09-25 4:56 ` [Cocci] " Christophe LEROY
2018-09-27 5:30 ` LABBE Corentin
2018-09-27 5:30 ` LABBE Corentin
2018-09-27 5:30 ` LABBE Corentin
2018-09-27 5:30 ` [Cocci] " LABBE Corentin
2018-09-24 19:04 ` Corentin Labbe [this message]
2018-09-24 19:04 ` [PATCH v2 2/7] include: add setbits32/clrbits32/clrsetbits32/setbits64/clrbits64/clrsetbits64 in linux/setbits.h Corentin Labbe
2018-09-24 19:04 ` Corentin Labbe
2018-09-24 19:04 ` [Cocci] " Corentin Labbe
2018-09-25 5:05 ` Christophe LEROY
2018-09-25 5:05 ` Christophe LEROY
2018-09-25 5:05 ` Christophe LEROY
2018-09-25 5:05 ` [Cocci] " Christophe LEROY
2018-09-27 5:35 ` LABBE Corentin
2018-09-27 5:35 ` LABBE Corentin
2018-09-27 5:35 ` LABBE Corentin
2018-09-27 5:35 ` [Cocci] " LABBE Corentin
2018-09-24 19:04 ` [PATCH v2 3/7] coccinelle: add xxxsetbitsXX converting spatch Corentin Labbe
2018-09-24 19:04 ` Corentin Labbe
2018-09-24 19:04 ` Corentin Labbe
2018-09-24 19:04 ` [Cocci] " Corentin Labbe
2018-09-24 19:04 ` [PATCH v2 4/7] ata: ahci_sunxi: use xxxsetbits32 functions Corentin Labbe
2018-09-24 19:04 ` Corentin Labbe
2018-09-24 19:04 ` Corentin Labbe
2018-09-24 19:04 ` [Cocci] " Corentin Labbe
2018-09-24 19:04 ` [PATCH v2 5/7] net: ethernet: stmmac: dwmac-sun8i: use xxxsetbits32 Corentin Labbe
2018-09-24 19:04 ` Corentin Labbe
2018-09-24 19:04 ` Corentin Labbe
2018-09-24 19:04 ` [Cocci] " Corentin Labbe
2018-09-24 19:04 ` [PATCH v2 6/7] drm: meson: " Corentin Labbe
2018-09-24 19:04 ` Corentin Labbe
2018-09-24 19:04 ` Corentin Labbe
2018-09-24 19:04 ` [Cocci] " Corentin Labbe
2018-09-24 19:07 ` Neil Armstrong
2018-09-24 19:07 ` Neil Armstrong
2018-09-24 19:07 ` Neil Armstrong
2018-09-24 19:07 ` [Cocci] " Neil Armstrong
2018-09-24 19:04 ` [PATCH v2 7/7] net: stmmac: dwmac-meson8b: " Corentin Labbe
2018-09-24 19:04 ` Corentin Labbe
2018-09-24 19:04 ` Corentin Labbe
2018-09-24 19:04 ` [Cocci] " Corentin Labbe
2018-09-24 19:08 ` Neil Armstrong
2018-09-24 19:08 ` Neil Armstrong
2018-09-24 19:08 ` Neil Armstrong
2018-09-24 19:08 ` [Cocci] " Neil Armstrong
2018-09-24 19:17 ` Florian Fainelli
2018-09-24 19:17 ` Florian Fainelli
2018-09-24 19:17 ` Florian Fainelli
2018-09-24 19:17 ` [Cocci] " Florian Fainelli
2018-09-25 7:53 ` Neil Armstrong
2018-09-25 7:53 ` Neil Armstrong
2018-09-25 7:53 ` Neil Armstrong
2018-09-25 7:53 ` [Cocci] " Neil Armstrong
2018-09-25 7:53 ` Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1537815856-31728-3-git-send-email-clabbe@baylibre.com \
--to=clabbe@baylibre.com \
--cc=Gilles.Muller@lip6.fr \
--cc=Julia.Lawall@lip6.fr \
--cc=agust@denx.de \
--cc=airlied@linux.ie \
--cc=alexandre.torgue@st.com \
--cc=alistair@popple.id.au \
--cc=benh@kernel.crashing.org \
--cc=carlo@caione.org \
--cc=cocci@systeme.lip6.fr \
--cc=davem@davemloft.net \
--cc=dri-devel@lists.freedesktop.org \
--cc=galak@kernel.crashing.org \
--cc=joabreu@synopsys.com \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=maxime.ripard@bootlin.com \
--cc=michal.lkml@markovi.net \
--cc=mpe@ellerman.id.au \
--cc=mporter@kernel.crashing.org \
--cc=narmstrong@baylibre.com \
--cc=netdev@vger.kernel.org \
--cc=nicolas.palix@imag.fr \
--cc=oss@buserror.net \
--cc=paulus@samba.org \
--cc=peppe.cavallaro@st.com \
--cc=tj@kernel.org \
--cc=vitb@kernel.crashing.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.