From: Schrempf Frieder <frieder.schrempf@kontron.de> To: Shawn Guo <shawnguo@kernel.org>, Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix Kernel Team <kernel@pengutronix.de>, Fabio Estevam <fabio.estevam@nxp.com>, NXP Linux Team <linux-imx@nxp.com>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Li Yang <leoyang.li@nxp.com> Cc: "boris.brezillon@bootlin.com" <boris.brezillon@bootlin.com>, "linux-mtd@lists.infradead.org" <linux-mtd@lists.infradead.org>, "broonie@kernel.org" <broonie@kernel.org>, "linux-spi@vger.kernel.org" <linux-spi@vger.kernel.org>, Schrempf Frieder <frieder.schrempf@kontron.de>, "linux-arm-kernel@lists.infradead.org" <linux-arm-kernel@lists.infradead.org>, "devicetree@vger.kernel.org" <devicetree@vger.kernel.org>, "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org> Subject: [PATCH 5/5] ARM: dts: Add spi-[tx/rx]-bus-width for the FSL QSPI controller Date: Mon, 10 Dec 2018 16:28:50 +0000 [thread overview] Message-ID: <1544459182-23655-6-git-send-email-frieder.schrempf@kontron.de> (raw) In-Reply-To: <1544459182-23655-1-git-send-email-frieder.schrempf@kontron.de> From: Frieder Schrempf <frieder.schrempf@kontron.de> We will move the FSL QSPI driver to the SPI framework soon. To prepare and to make sure the full buswidth is used (as it is with the current driver), let's add the right properties. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> --- arch/arm/boot/dts/imx6sx-sdb-reva.dts | 4 ++++ arch/arm/boot/dts/imx6sx-sdb.dts | 4 ++++ arch/arm/boot/dts/imx6ul-14x14-evk.dtsi | 2 ++ arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts | 2 ++ 4 files changed, 12 insertions(+) diff --git a/arch/arm/boot/dts/imx6sx-sdb-reva.dts b/arch/arm/boot/dts/imx6sx-sdb-reva.dts index 344abc2..9997156 100644 --- a/arch/arm/boot/dts/imx6sx-sdb-reva.dts +++ b/arch/arm/boot/dts/imx6sx-sdb-reva.dts @@ -132,6 +132,8 @@ #size-cells = <1>; compatible = "spansion,s25fl128s", "jedec,spi-nor"; spi-max-frequency = <66000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; }; flash1: s25fl128s@2 { @@ -140,5 +142,7 @@ #size-cells = <1>; compatible = "spansion,s25fl128s", "jedec,spi-nor"; spi-max-frequency = <66000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; }; }; diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts index 5a39703..9acfda8 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dts +++ b/arch/arm/boot/dts/imx6sx-sdb.dts @@ -117,6 +117,8 @@ #size-cells = <1>; compatible = "micron,n25q256a", "jedec,spi-nor"; spi-max-frequency = <29000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; reg = <0>; }; @@ -125,6 +127,8 @@ #size-cells = <1>; compatible = "micron,n25q256a", "jedec,spi-nor"; spi-max-frequency = <29000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; reg = <2>; }; }; diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi index 32a0723..c2c9a2a 100644 --- a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi +++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi @@ -176,6 +176,8 @@ #size-cells = <1>; compatible = "micron,n25q256a"; spi-max-frequency = <29000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; reg = <0>; }; }; diff --git a/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts b/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts index 6bb7ce0..6a83f30 100644 --- a/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts +++ b/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts @@ -211,6 +211,8 @@ #address-cells = <1>; #size-cells = <1>; spi-max-frequency = <20000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; reg = <0>; partitions@0 { -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Schrempf Frieder <frieder.schrempf@kontron.de> To: Shawn Guo <shawnguo@kernel.org>, Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix Kernel Team <kernel@pengutronix.de>, Fabio Estevam <fabio.estevam@nxp.com>, NXP Linux Team <linux-imx@nxp.com>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Li Yang <leoyang.li@nxp.com> Cc: "devicetree@vger.kernel.org" <devicetree@vger.kernel.org>, "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>, Schrempf Frieder <frieder.schrempf@kontron.de>, "linux-spi@vger.kernel.org" <linux-spi@vger.kernel.org>, "boris.brezillon@bootlin.com" <boris.brezillon@bootlin.com>, "broonie@kernel.org" <broonie@kernel.org>, "linux-mtd@lists.infradead.org" <linux-mtd@lists.infradead.org>, "linux-arm-kernel@lists.infradead.org" <linux-arm-kernel@lists.infradead.org> Subject: [PATCH 5/5] ARM: dts: Add spi-[tx/rx]-bus-width for the FSL QSPI controller Date: Mon, 10 Dec 2018 16:28:50 +0000 [thread overview] Message-ID: <1544459182-23655-6-git-send-email-frieder.schrempf@kontron.de> (raw) In-Reply-To: <1544459182-23655-1-git-send-email-frieder.schrempf@kontron.de> From: Frieder Schrempf <frieder.schrempf@kontron.de> We will move the FSL QSPI driver to the SPI framework soon. To prepare and to make sure the full buswidth is used (as it is with the current driver), let's add the right properties. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> --- arch/arm/boot/dts/imx6sx-sdb-reva.dts | 4 ++++ arch/arm/boot/dts/imx6sx-sdb.dts | 4 ++++ arch/arm/boot/dts/imx6ul-14x14-evk.dtsi | 2 ++ arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts | 2 ++ 4 files changed, 12 insertions(+) diff --git a/arch/arm/boot/dts/imx6sx-sdb-reva.dts b/arch/arm/boot/dts/imx6sx-sdb-reva.dts index 344abc2..9997156 100644 --- a/arch/arm/boot/dts/imx6sx-sdb-reva.dts +++ b/arch/arm/boot/dts/imx6sx-sdb-reva.dts @@ -132,6 +132,8 @@ #size-cells = <1>; compatible = "spansion,s25fl128s", "jedec,spi-nor"; spi-max-frequency = <66000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; }; flash1: s25fl128s@2 { @@ -140,5 +142,7 @@ #size-cells = <1>; compatible = "spansion,s25fl128s", "jedec,spi-nor"; spi-max-frequency = <66000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; }; }; diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts index 5a39703..9acfda8 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dts +++ b/arch/arm/boot/dts/imx6sx-sdb.dts @@ -117,6 +117,8 @@ #size-cells = <1>; compatible = "micron,n25q256a", "jedec,spi-nor"; spi-max-frequency = <29000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; reg = <0>; }; @@ -125,6 +127,8 @@ #size-cells = <1>; compatible = "micron,n25q256a", "jedec,spi-nor"; spi-max-frequency = <29000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; reg = <2>; }; }; diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi index 32a0723..c2c9a2a 100644 --- a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi +++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi @@ -176,6 +176,8 @@ #size-cells = <1>; compatible = "micron,n25q256a"; spi-max-frequency = <29000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; reg = <0>; }; }; diff --git a/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts b/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts index 6bb7ce0..6a83f30 100644 --- a/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts +++ b/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts @@ -211,6 +211,8 @@ #address-cells = <1>; #size-cells = <1>; spi-max-frequency = <20000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; reg = <0>; partitions@0 { -- 2.7.4 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2018-12-10 16:28 UTC|newest] Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-12-10 16:28 [PATCH 0/5] Prepare devicetrees for the new FSL QSPI driver Schrempf Frieder 2018-12-10 16:28 ` Schrempf Frieder 2018-12-10 16:28 ` Schrempf Frieder 2018-12-10 16:28 ` [PATCH 2/5] ARM: dts: Remove unused properties from FSL QSPI driver nodes Schrempf Frieder 2018-12-10 16:28 ` Schrempf Frieder 2018-12-10 16:28 ` Schrempf Frieder 2018-12-10 16:28 ` [PATCH 1/5] arm64: " Schrempf Frieder 2018-12-10 16:28 ` Schrempf Frieder 2018-12-10 16:28 ` Schrempf Frieder 2018-12-10 16:28 ` [PATCH 4/5] arm64: dts: Add spi-[tx/rx]-bus-width for the FSL QSPI controller Schrempf Frieder 2018-12-10 16:28 ` Schrempf Frieder 2018-12-10 16:28 ` Schrempf Frieder 2018-12-10 16:28 ` [PATCH 3/5] ARM: dts: imx6sx-sdb: Fix the reg properties for the FSL QSPI nodes Schrempf Frieder 2018-12-10 16:28 ` Schrempf Frieder 2018-12-10 16:28 ` Schrempf Frieder 2018-12-10 16:28 ` Schrempf Frieder [this message] 2018-12-10 16:28 ` [PATCH 5/5] ARM: dts: Add spi-[tx/rx]-bus-width for the FSL QSPI controller Schrempf Frieder 2018-12-10 16:28 ` Schrempf Frieder 2018-12-10 16:31 ` [PATCH 0/5] Prepare devicetrees for the new FSL QSPI driver Schrempf Frieder 2018-12-10 16:31 ` Schrempf Frieder 2018-12-10 16:31 ` Schrempf Frieder 2018-12-13 9:45 ` Schrempf Frieder 2018-12-13 9:45 ` Schrempf Frieder 2018-12-13 9:45 ` Schrempf Frieder 2018-12-14 0:42 ` Shawn Guo 2018-12-14 0:42 ` Shawn Guo 2018-12-14 0:42 ` Shawn Guo 2018-12-15 10:04 ` AW: " Schrempf Frieder 2018-12-15 10:04 ` Schrempf Frieder 2018-12-15 10:04 ` Schrempf Frieder 2018-12-16 7:51 ` Shawn Guo 2018-12-16 7:51 ` Shawn Guo 2018-12-16 7:51 ` Shawn Guo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1544459182-23655-6-git-send-email-frieder.schrempf@kontron.de \ --to=frieder.schrempf@kontron.de \ --cc=boris.brezillon@bootlin.com \ --cc=broonie@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=fabio.estevam@nxp.com \ --cc=kernel@pengutronix.de \ --cc=leoyang.li@nxp.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-imx@nxp.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-mtd@lists.infradead.org \ --cc=linux-spi@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=robh+dt@kernel.org \ --cc=s.hauer@pengutronix.de \ --cc=shawnguo@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.