From: <Claudiu.Beznea@microchip.com>
To: <robh+dt@kernel.org>, <mark.rutland@arm.com>,
<Nicolas.Ferre@microchip.com>, <alexandre.belloni@bootlin.com>,
<Ludovic.Desroches@microchip.com>, <sre@kernel.org>
Cc: <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <linux-pm@vger.kernel.org>,
<Claudiu.Beznea@microchip.com>
Subject: [PATCH 0/3] add support for SAM9X60's shutdown controller
Date: Thu, 14 Feb 2019 11:24:00 +0000 [thread overview]
Message-ID: <1550143407-26109-1-git-send-email-claudiu.beznea@microchip.com> (raw)
From: Claudiu Beznea <claudiu.beznea@microchip.com>
Hi,
This series adapt SAMA5D2's shutdown controller driver to work for
SAM9X60's shutdown controller. The difference is that SAM9X60 have
option for RTT timer wakeup.
Thank you,
Claudiu Beznea
Claudiu Beznea (3):
power: reset: at91-poweroff: add RTT wakeup capability
power: reset: at91-poweroff: add support for SAM9X60
dt-bindings: arm: atmel: add binding for SAM9X60 shutdown controller
.../devicetree/bindings/arm/atmel-sysregs.txt | 6 +++++-
drivers/power/reset/at91-sama5d2_shdwc.c | 25 ++++++++++++++++++++++
2 files changed, 30 insertions(+), 1 deletion(-)
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: <Claudiu.Beznea@microchip.com>
To: robh+dt@kernel.org, mark.rutland@arm.com,
Nicolas.Ferre@microchip.com, alexandre.belloni@bootlin.com,
Ludovic.Desroches@microchip.com, sre@kernel.org
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org,
Claudiu.Beznea@microchip.com
Subject: [PATCH 0/3] add support for SAM9X60's shutdown controller
Date: Thu, 14 Feb 2019 11:24:00 +0000 [thread overview]
Message-ID: <1550143407-26109-1-git-send-email-claudiu.beznea@microchip.com> (raw)
From: Claudiu Beznea <claudiu.beznea@microchip.com>
Hi,
This series adapt SAMA5D2's shutdown controller driver to work for
SAM9X60's shutdown controller. The difference is that SAM9X60 have
option for RTT timer wakeup.
Thank you,
Claudiu Beznea
Claudiu Beznea (3):
power: reset: at91-poweroff: add RTT wakeup capability
power: reset: at91-poweroff: add support for SAM9X60
dt-bindings: arm: atmel: add binding for SAM9X60 shutdown controller
.../devicetree/bindings/arm/atmel-sysregs.txt | 6 +++++-
drivers/power/reset/at91-sama5d2_shdwc.c | 25 ++++++++++++++++++++++
2 files changed, 30 insertions(+), 1 deletion(-)
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: <Claudiu.Beznea@microchip.com>
To: <robh+dt@kernel.org>, <mark.rutland@arm.com>,
<Nicolas.Ferre@microchip.com>, <alexandre.belloni@bootlin.com>,
<Ludovic.Desroches@microchip.com>, <sre@kernel.org>
Cc: devicetree@vger.kernel.org, Claudiu.Beznea@microchip.com,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-pm@vger.kernel.org
Subject: [PATCH 0/3] add support for SAM9X60's shutdown controller
Date: Thu, 14 Feb 2019 11:24:00 +0000 [thread overview]
Message-ID: <1550143407-26109-1-git-send-email-claudiu.beznea@microchip.com> (raw)
From: Claudiu Beznea <claudiu.beznea@microchip.com>
Hi,
This series adapt SAMA5D2's shutdown controller driver to work for
SAM9X60's shutdown controller. The difference is that SAM9X60 have
option for RTT timer wakeup.
Thank you,
Claudiu Beznea
Claudiu Beznea (3):
power: reset: at91-poweroff: add RTT wakeup capability
power: reset: at91-poweroff: add support for SAM9X60
dt-bindings: arm: atmel: add binding for SAM9X60 shutdown controller
.../devicetree/bindings/arm/atmel-sysregs.txt | 6 +++++-
drivers/power/reset/at91-sama5d2_shdwc.c | 25 ++++++++++++++++++++++
2 files changed, 30 insertions(+), 1 deletion(-)
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2019-02-14 11:24 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-14 11:24 Claudiu.Beznea [this message]
2019-02-14 11:24 ` [PATCH 0/3] add support for SAM9X60's shutdown controller Claudiu.Beznea
2019-02-14 11:24 ` Claudiu.Beznea
2019-02-14 11:24 ` [PATCH 1/3] power: reset: at91-poweroff: add RTT wakeup capability Claudiu.Beznea
2019-02-14 11:24 ` Claudiu.Beznea
2019-02-14 11:24 ` Claudiu.Beznea
2019-02-18 10:59 ` Nicolas.Ferre
2019-02-18 10:59 ` Nicolas.Ferre
2019-02-18 10:59 ` Nicolas.Ferre
2019-02-14 11:24 ` [PATCH 2/3] power: reset: at91-poweroff: add support for SAM9X60 Claudiu.Beznea
2019-02-14 11:24 ` Claudiu.Beznea
2019-02-14 11:24 ` Claudiu.Beznea
2019-02-18 10:59 ` Nicolas.Ferre
2019-02-18 10:59 ` Nicolas.Ferre
2019-02-18 10:59 ` Nicolas.Ferre
2019-02-14 11:24 ` [PATCH 3/3] dt-bindings: arm: atmel: add binding for SAM9X60 shutdown controller Claudiu.Beznea
2019-02-14 11:24 ` Claudiu.Beznea
2019-02-14 11:24 ` Claudiu.Beznea
2019-02-18 11:01 ` Nicolas.Ferre
2019-02-18 11:01 ` Nicolas.Ferre
2019-02-18 11:01 ` Nicolas.Ferre
2019-02-18 14:47 ` Claudiu.Beznea
2019-02-18 14:47 ` Claudiu.Beznea
2019-02-18 14:47 ` Claudiu.Beznea
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1550143407-26109-1-git-send-email-claudiu.beznea@microchip.com \
--to=claudiu.beznea@microchip.com \
--cc=Ludovic.Desroches@microchip.com \
--cc=Nicolas.Ferre@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=sre@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.