[PATCH v1 0/5] Add supply property for DSI controller

From: "Yannick Fertré" <yannick.fertre@st.com>
To: Yannick Fertre <yannick.fertre@st.com>,
	Philippe Cornu <philippe.cornu@st.com>,
	Benjamin Gaignard <benjamin.gaignard@st.com>,
	Vincent Abriou <vincent.abriou@st.com>,
	David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
	Rob Herring <robh+dt@kernel.org>,
	"Mark Rutland" <mark.rutland@arm.com>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Alexandre Torgue <alexandre.torgue@st.com>,
	<dri-devel@lists.freedesktop.org>, <devicetree@vger.kernel.org>,
	<linux-stm32@st-md-mailman.stormreply.com>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>
Subject: [PATCH v1 0/5] Add supply property for DSI controller
Date: Wed, 3 Apr 2019 10:16:24 +0200	[thread overview]
Message-ID: <1554279389-27377-1-git-send-email-yannick.fertre@st.com> (raw)

The DSI controller needs a new property that powers its physical layer.
Binding has been updated to documented this property.
Device tree of stm32mp157c soc.
Move reg18 & reg11 to stm32mp157c device tree file.
Remove property phy-dsi-supply property to stm32mp157c-dk2.dts file.

Yannick Fertré (5):
  dt-bindings: display: stm32: add supply property to DSI controller
  drm/stm: dw_mipi_dsi-stm: add support of an optional regulator
  ARM: dts: stm32: add phy-dsi-supply property on stm32mp157c
  ARM: dts: stm32: move fixe regulators reg11 & reg18
  ARM: dts: stm32: remove phy-dsi-supply property on stm32mp157c-dk2
    board

 .../devicetree/bindings/display/st,stm32-ltdc.txt    |  3 +++
 arch/arm/boot/dts/stm32mp157c-dk2.dts                |  9 ---------
 arch/arm/boot/dts/stm32mp157c-ed1.dts                | 16 ----------------
 arch/arm/boot/dts/stm32mp157c.dtsi                   | 17 +++++++++++++++++
 drivers/gpu/drm/stm/dw_mipi_dsi-stm.c                | 20 ++++++++++++++++++++
 5 files changed, 40 insertions(+), 25 deletions(-)

-- 
2.7.4