From: Robin Gong <yibin.gong@nxp.com>
To: "robh@kernel.org" <robh@kernel.org>,
"shawnguo@kernel.org" <shawnguo@kernel.org>,
"s.hauer@pengutronix.de" <s.hauer@pengutronix.de>,
"festevam@gmail.com" <festevam@gmail.com>,
"mark.rutland@arm.com" <mark.rutland@arm.com>,
"vkoul@kernel.org" <vkoul@kernel.org>,
"dan.j.williams@intel.com" <dan.j.williams@intel.com>
Cc: dl-linux-imx <linux-imx@nxp.com>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"dmaengine@vger.kernel.org" <dmaengine@vger.kernel.org>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"kernel@pengutronix.de" <kernel@pengutronix.de>
Subject: [PATCH v1 6/6] ARM: dts: imx7ulp: add edma device node
Date: Fri, 10 May 2019 10:14:31 +0000 [thread overview]
Message-ID: <1557512248-8440-7-git-send-email-yibin.gong@nxp.com> (raw)
In-Reply-To: <1557512248-8440-1-git-send-email-yibin.gong@nxp.com>
Add edma device node in dts.
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
arch/arm/boot/dts/imx7ulp.dtsi | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/arch/arm/boot/dts/imx7ulp.dtsi b/arch/arm/boot/dts/imx7ulp.dtsi
index d6b7110..b4f7adf 100644
--- a/arch/arm/boot/dts/imx7ulp.dtsi
+++ b/arch/arm/boot/dts/imx7ulp.dtsi
@@ -100,6 +100,34 @@
reg = <0x40000000 0x800000>;
ranges;
+ edma1: dma-controller@40080000 {
+ #dma-cells = <2>;
+ compatible = "fsl,imx7ulp-edma";
+ reg = <0x40080000 0x2000>,
+ <0x40210000 0x1000>;
+ dma-channels = <32>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "dma", "dmamux0";
+ clocks = <&pcc2 IMX7ULP_CLK_DMA1>,
+ <&pcc2 IMX7ULP_CLK_DMA_MUX1>;
+ };
+
lpuart4: serial@402d0000 {
compatible = "fsl,imx7ulp-lpuart";
reg = <0x402d0000 0x1000>;
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Robin Gong <yibin.gong@nxp.com>
To: "robh@kernel.org" <robh@kernel.org>,
"shawnguo@kernel.org" <shawnguo@kernel.org>,
"s.hauer@pengutronix.de" <s.hauer@pengutronix.de>,
"festevam@gmail.com" <festevam@gmail.com>,
"mark.rutland@arm.com" <mark.rutland@arm.com>,
"vkoul@kernel.org" <vkoul@kernel.org>,
"dan.j.williams@intel.com" <dan.j.williams@intel.com>
Cc: "devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
dl-linux-imx <linux-imx@nxp.com>,
"kernel@pengutronix.de" <kernel@pengutronix.de>,
"dmaengine@vger.kernel.org" <dmaengine@vger.kernel.org>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>
Subject: [PATCH v1 6/6] ARM: dts: imx7ulp: add edma device node
Date: Fri, 10 May 2019 10:14:31 +0000 [thread overview]
Message-ID: <1557512248-8440-7-git-send-email-yibin.gong@nxp.com> (raw)
In-Reply-To: <1557512248-8440-1-git-send-email-yibin.gong@nxp.com>
Add edma device node in dts.
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
arch/arm/boot/dts/imx7ulp.dtsi | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/arch/arm/boot/dts/imx7ulp.dtsi b/arch/arm/boot/dts/imx7ulp.dtsi
index d6b7110..b4f7adf 100644
--- a/arch/arm/boot/dts/imx7ulp.dtsi
+++ b/arch/arm/boot/dts/imx7ulp.dtsi
@@ -100,6 +100,34 @@
reg = <0x40000000 0x800000>;
ranges;
+ edma1: dma-controller@40080000 {
+ #dma-cells = <2>;
+ compatible = "fsl,imx7ulp-edma";
+ reg = <0x40080000 0x2000>,
+ <0x40210000 0x1000>;
+ dma-channels = <32>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "dma", "dmamux0";
+ clocks = <&pcc2 IMX7ULP_CLK_DMA1>,
+ <&pcc2 IMX7ULP_CLK_DMA_MUX1>;
+ };
+
lpuart4: serial@402d0000 {
compatible = "fsl,imx7ulp-lpuart";
reg = <0x402d0000 0x1000>;
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-05-10 10:14 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-10 10:14 [PATCH v1 0/6] add edma2 for i.mx7ulp Robin Gong
2019-05-10 10:14 ` Robin Gong
2019-05-10 10:14 ` Robin Gong
2019-05-10 10:14 ` [PATCH v1 1/6] dmaengine: fsl-edma: add dmamux_nr for next version Robin Gong
2019-05-10 10:14 ` Robin Gong
2019-05-10 10:14 ` Robin Gong
2019-05-10 10:14 ` [PATCH v1 2/6] dmaengine: mcf-edma: update to 'dmamux_nr' Robin Gong
2019-05-10 10:14 ` Robin Gong
2019-05-10 10:14 ` Robin Gong
2019-05-10 10:14 ` [PATCH v1 3/6] dmaengine: fsl-edma-common: move dmamux register to another single function Robin Gong
2019-05-10 10:14 ` Robin Gong
2019-05-10 10:14 ` Robin Gong
2019-05-10 10:14 ` [PATCH v1 4/6] dmaengine: fsl-edma: add i.mx7ulp edma2 version support Robin Gong
2019-05-10 10:14 ` Robin Gong
2019-05-10 10:14 ` Robin Gong
2019-05-27 6:34 ` Vinod Koul
2019-05-27 6:34 ` Vinod Koul
2019-05-27 6:34 ` Vinod Koul
2019-05-27 7:31 ` Robin Gong
2019-05-27 7:31 ` Robin Gong
2019-05-27 7:31 ` Robin Gong
2019-05-10 10:14 ` [PATCH v1 5/6] dt-bindings: dma: fsl-edma: add new i.mx7ulp-edma Robin Gong
2019-05-10 10:14 ` Robin Gong
2019-05-10 10:14 ` Robin Gong
2019-05-10 10:14 ` Robin Gong [this message]
2019-05-10 10:14 ` [PATCH v1 6/6] ARM: dts: imx7ulp: add edma device node Robin Gong
2019-05-10 10:14 ` Robin Gong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1557512248-8440-7-git-send-email-yibin.gong@nxp.com \
--to=yibin.gong@nxp.com \
--cc=dan.j.williams@intel.com \
--cc=devicetree@vger.kernel.org \
--cc=dmaengine@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.