[PATCH V2 11/13] ARM: bcm: Add support for BCM2711 SoC

All of lore.kernel.org
 help / color / mirror / Atom feed

From: Stefan Wahren <wahrenst@gmx.net>
To: Eric Anholt <eric@anholt.net>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Ray Jui <rjui@broadcom.com>,
	Scott Branden <sbranden@broadcom.com>,
	Wolfram Sang <wsa@the-dreams.de>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>
Cc: devicetree@vger.kernel.org, Stefan Wahren <wahrenst@gmx.net>,
	bcm-kernel-feedback-list@broadcom.com,
	linux-rpi-kernel@lists.infradead.org, linux-clk@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, linux-i2c@vger.kernel.org
Subject: [PATCH V2 11/13] ARM: bcm: Add support for BCM2711 SoC
Date: Tue, 13 Aug 2019 18:20:46 +0200	[thread overview]
Message-ID: <1565713248-4906-12-git-send-email-wahrenst@gmx.net> (raw)
In-Reply-To: <1565713248-4906-1-git-send-email-wahrenst@gmx.net>

Add the BCM2711 to ARCH_BCM2835, but use new machine board code
because of the differences.

Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
---
 arch/arm/mach-bcm/Kconfig   |  3 ++-
 arch/arm/mach-bcm/Makefile  |  3 ++-
 arch/arm/mach-bcm/bcm2711.c | 22 ++++++++++++++++++++++
 3 files changed, 26 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/mach-bcm/bcm2711.c

diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index 5e5f1fa..39bcbea 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -161,6 +161,7 @@ config ARCH_BCM2835
 	select GPIOLIB
 	select ARM_AMBA
 	select ARM_ERRATA_411920 if ARCH_MULTI_V6
+	select ARM_GIC if ARCH_MULTI_V7
 	select ARM_TIMER_SP804
 	select HAVE_ARM_ARCH_TIMER if ARCH_MULTI_V7
 	select TIMER_OF
@@ -169,7 +170,7 @@ config ARCH_BCM2835
 	select PINCTRL_BCM2835
 	select MFD_CORE
 	help
-	  This enables support for the Broadcom BCM2835 and BCM2836 SoCs.
+	  This enables support for the Broadcom BCM2711 and BCM283x SoCs.
 	  This SoC is used in the Raspberry Pi and Roku 2 devices.

 config ARCH_BCM_53573
diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile
index b59c813..7baa8c9 100644
--- a/arch/arm/mach-bcm/Makefile
+++ b/arch/arm/mach-bcm/Makefile
@@ -42,8 +42,9 @@ obj-$(CONFIG_ARCH_BCM_MOBILE_L2_CACHE) += kona_l2_cache.o
 obj-$(CONFIG_ARCH_BCM_MOBILE_SMC) += bcm_kona_smc.o

 # BCM2835
-obj-$(CONFIG_ARCH_BCM2835)	+= board_bcm2835.o
 ifeq ($(CONFIG_ARCH_BCM2835),y)
+obj-y				+= board_bcm2835.o
+obj-y				+= bcm2711.o
 ifeq ($(CONFIG_ARM),y)
 obj-$(CONFIG_SMP)		+= platsmp.o
 endif
diff --git a/arch/arm/mach-bcm/bcm2711.c b/arch/arm/mach-bcm/bcm2711.c
new file mode 100644
index 0000000..1fa15b4
--- /dev/null
+++ b/arch/arm/mach-bcm/bcm2711.c
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Stefan Wahren
+ */
+
+#include <linux/of_address.h>
+
+#include <asm/mach/arch.h>
+
+#include "platsmp.h"
+
+static const char * const bcm2711_compat[] = {
+#ifdef CONFIG_ARCH_MULTI_V7
+	"brcm,bcm2711",
+#endif
+};
+
+DT_MACHINE_START(BCM2711, "BCM2711")
+	.dma_zone_size	= SZ_1G,
+	.dt_compat = bcm2711_compat,
+	.smp = smp_ops(bcm2836_smp_ops),
+MACHINE_END
--
2.7.4

WARNING: multiple messages have this Message-ID (diff)

From: Stefan Wahren <wahrenst@gmx.net>
To: Eric Anholt <eric@anholt.net>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Ray Jui <rjui@broadcom.com>,
	Scott Branden <sbranden@broadcom.com>,
	Wolfram Sang <wsa@the-dreams.de>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>
Cc: bcm-kernel-feedback-list@broadcom.com,
	linux-arm-kernel@lists.infradead.org, linux-i2c@vger.kernel.org,
	linux-clk@vger.kernel.org, linux-rpi-kernel@lists.infradead.org,
	devicetree@vger.kernel.org, Stefan Wahren <wahrenst@gmx.net>
Subject: [PATCH V2 11/13] ARM: bcm: Add support for BCM2711 SoC
Date: Tue, 13 Aug 2019 18:20:46 +0200	[thread overview]
Message-ID: <1565713248-4906-12-git-send-email-wahrenst@gmx.net> (raw)
In-Reply-To: <1565713248-4906-1-git-send-email-wahrenst@gmx.net>

Add the BCM2711 to ARCH_BCM2835, but use new machine board code
because of the differences.

Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
---
 arch/arm/mach-bcm/Kconfig   |  3 ++-
 arch/arm/mach-bcm/Makefile  |  3 ++-
 arch/arm/mach-bcm/bcm2711.c | 22 ++++++++++++++++++++++
 3 files changed, 26 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/mach-bcm/bcm2711.c

diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index 5e5f1fa..39bcbea 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -161,6 +161,7 @@ config ARCH_BCM2835
 	select GPIOLIB
 	select ARM_AMBA
 	select ARM_ERRATA_411920 if ARCH_MULTI_V6
+	select ARM_GIC if ARCH_MULTI_V7
 	select ARM_TIMER_SP804
 	select HAVE_ARM_ARCH_TIMER if ARCH_MULTI_V7
 	select TIMER_OF
@@ -169,7 +170,7 @@ config ARCH_BCM2835
 	select PINCTRL_BCM2835
 	select MFD_CORE
 	help
-	  This enables support for the Broadcom BCM2835 and BCM2836 SoCs.
+	  This enables support for the Broadcom BCM2711 and BCM283x SoCs.
 	  This SoC is used in the Raspberry Pi and Roku 2 devices.

 config ARCH_BCM_53573
diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile
index b59c813..7baa8c9 100644
--- a/arch/arm/mach-bcm/Makefile
+++ b/arch/arm/mach-bcm/Makefile
@@ -42,8 +42,9 @@ obj-$(CONFIG_ARCH_BCM_MOBILE_L2_CACHE) += kona_l2_cache.o
 obj-$(CONFIG_ARCH_BCM_MOBILE_SMC) += bcm_kona_smc.o

 # BCM2835
-obj-$(CONFIG_ARCH_BCM2835)	+= board_bcm2835.o
 ifeq ($(CONFIG_ARCH_BCM2835),y)
+obj-y				+= board_bcm2835.o
+obj-y				+= bcm2711.o
 ifeq ($(CONFIG_ARM),y)
 obj-$(CONFIG_SMP)		+= platsmp.o
 endif
diff --git a/arch/arm/mach-bcm/bcm2711.c b/arch/arm/mach-bcm/bcm2711.c
new file mode 100644
index 0000000..1fa15b4
--- /dev/null
+++ b/arch/arm/mach-bcm/bcm2711.c
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Stefan Wahren
+ */
+
+#include <linux/of_address.h>
+
+#include <asm/mach/arch.h>
+
+#include "platsmp.h"
+
+static const char * const bcm2711_compat[] = {
+#ifdef CONFIG_ARCH_MULTI_V7
+	"brcm,bcm2711",
+#endif
+};
+
+DT_MACHINE_START(BCM2711, "BCM2711")
+	.dma_zone_size	= SZ_1G,
+	.dt_compat = bcm2711_compat,
+	.smp = smp_ops(bcm2836_smp_ops),
+MACHINE_END
--
2.7.4

WARNING: multiple messages have this Message-ID (diff)

From: Stefan Wahren <wahrenst@gmx.net>
To: Eric Anholt <eric@anholt.net>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Ray Jui <rjui@broadcom.com>,
	Scott Branden <sbranden@broadcom.com>,
	Wolfram Sang <wsa@the-dreams.de>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>
Cc: devicetree@vger.kernel.org, Stefan Wahren <wahrenst@gmx.net>,
	bcm-kernel-feedback-list@broadcom.com,
	linux-rpi-kernel@lists.infradead.org, linux-clk@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, linux-i2c@vger.kernel.org
Subject: [PATCH V2 11/13] ARM: bcm: Add support for BCM2711 SoC
Date: Tue, 13 Aug 2019 18:20:46 +0200	[thread overview]
Message-ID: <1565713248-4906-12-git-send-email-wahrenst@gmx.net> (raw)
In-Reply-To: <1565713248-4906-1-git-send-email-wahrenst@gmx.net>

Add the BCM2711 to ARCH_BCM2835, but use new machine board code
because of the differences.

Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
---
 arch/arm/mach-bcm/Kconfig   |  3 ++-
 arch/arm/mach-bcm/Makefile  |  3 ++-
 arch/arm/mach-bcm/bcm2711.c | 22 ++++++++++++++++++++++
 3 files changed, 26 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/mach-bcm/bcm2711.c

diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index 5e5f1fa..39bcbea 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -161,6 +161,7 @@ config ARCH_BCM2835
 	select GPIOLIB
 	select ARM_AMBA
 	select ARM_ERRATA_411920 if ARCH_MULTI_V6
+	select ARM_GIC if ARCH_MULTI_V7
 	select ARM_TIMER_SP804
 	select HAVE_ARM_ARCH_TIMER if ARCH_MULTI_V7
 	select TIMER_OF
@@ -169,7 +170,7 @@ config ARCH_BCM2835
 	select PINCTRL_BCM2835
 	select MFD_CORE
 	help
-	  This enables support for the Broadcom BCM2835 and BCM2836 SoCs.
+	  This enables support for the Broadcom BCM2711 and BCM283x SoCs.
 	  This SoC is used in the Raspberry Pi and Roku 2 devices.

 config ARCH_BCM_53573
diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile
index b59c813..7baa8c9 100644
--- a/arch/arm/mach-bcm/Makefile
+++ b/arch/arm/mach-bcm/Makefile
@@ -42,8 +42,9 @@ obj-$(CONFIG_ARCH_BCM_MOBILE_L2_CACHE) += kona_l2_cache.o
 obj-$(CONFIG_ARCH_BCM_MOBILE_SMC) += bcm_kona_smc.o

 # BCM2835
-obj-$(CONFIG_ARCH_BCM2835)	+= board_bcm2835.o
 ifeq ($(CONFIG_ARCH_BCM2835),y)
+obj-y				+= board_bcm2835.o
+obj-y				+= bcm2711.o
 ifeq ($(CONFIG_ARM),y)
 obj-$(CONFIG_SMP)		+= platsmp.o
 endif
diff --git a/arch/arm/mach-bcm/bcm2711.c b/arch/arm/mach-bcm/bcm2711.c
new file mode 100644
index 0000000..1fa15b4
--- /dev/null
+++ b/arch/arm/mach-bcm/bcm2711.c
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Stefan Wahren
+ */
+
+#include <linux/of_address.h>
+
+#include <asm/mach/arch.h>
+
+#include "platsmp.h"
+
+static const char * const bcm2711_compat[] = {
+#ifdef CONFIG_ARCH_MULTI_V7
+	"brcm,bcm2711",
+#endif
+};
+
+DT_MACHINE_START(BCM2711, "BCM2711")
+	.dma_zone_size	= SZ_1G,
+	.dt_compat = bcm2711_compat,
+	.smp = smp_ops(bcm2836_smp_ops),
+MACHINE_END
--
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

next prev parent reply	other threads:[~2019-08-13 16:20 UTC|newest]

Thread overview: 89+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-13 16:20 [PATCH V2 00/13] ARM: Add minimal Raspberry Pi 4 support Stefan Wahren
2019-08-13 16:20 ` Stefan Wahren
2019-08-13 16:20 ` Stefan Wahren
2019-08-13 16:20 ` [PATCH V2 01/13] ARM: dts: bcm283x: Enable HDMI at board level Stefan Wahren
2019-08-13 16:20   ` Stefan Wahren
2019-08-13 16:20   ` Stefan Wahren
2019-08-13 16:20 ` [PATCH V2 02/13] ARM: dts: bcm283x: Move BCM2835/6/7 specific to bcm2835-common.dtsi Stefan Wahren
2019-08-13 16:20   ` Stefan Wahren
2019-08-13 16:20   ` Stefan Wahren
2019-08-13 16:20 ` [PATCH V2 03/13] dt-bindings: bcm2835-cprman: Add bcm2711 support Stefan Wahren
2019-08-13 16:20   ` Stefan Wahren
2019-08-13 16:20   ` Stefan Wahren
2019-08-16 17:41   ` Stephen Boyd
2019-08-16 17:41     ` Stephen Boyd
2019-08-16 17:41     ` Stephen Boyd
2019-08-27 16:00   ` Rob Herring
2019-08-27 16:00     ` Rob Herring
2019-08-27 16:00     ` Rob Herring
2019-08-13 16:20 ` [PATCH V2 04/13] clk: bcm2835: Introduce SoC specific clock registration Stefan Wahren
2019-08-13 16:20   ` Stefan Wahren
2019-08-13 16:20   ` Stefan Wahren
2019-08-13 16:20 ` [PATCH V2 05/13] clk: bcm2835: Add BCM2711_CLOCK_EMMC2 support Stefan Wahren
2019-08-13 16:20   ` Stefan Wahren
2019-08-13 16:20   ` Stefan Wahren
2019-09-12 17:24   ` Matthias Brugger
2019-09-12 17:24     ` Matthias Brugger
2019-09-12 17:24     ` Matthias Brugger
2019-09-12 18:52     ` Eric Anholt
2019-09-12 18:52       ` Eric Anholt
2019-09-13  1:20       ` Stefan Wahren
2019-09-13  1:20         ` Stefan Wahren
2019-09-13  1:20         ` Stefan Wahren
2019-09-13  7:13         ` Matthias Brugger
2019-09-13  7:13           ` Matthias Brugger
2019-09-13  7:13           ` Matthias Brugger
2019-09-13 23:02           ` Florian Fainelli
2019-09-13 23:02             ` Florian Fainelli
2019-09-13 23:02             ` Florian Fainelli
2019-08-13 16:20 ` [PATCH V2 06/13] clk: bcm2835: Mark PLLD_PER as CRITICAL Stefan Wahren
2019-08-13 16:20   ` Stefan Wahren
2019-08-13 16:20   ` Stefan Wahren
2019-08-16 17:39   ` Stephen Boyd
2019-08-16 17:39     ` Stephen Boyd
2019-08-16 17:39     ` Stephen Boyd
2019-08-13 16:20 ` [PATCH V2 07/13] dt-bindings: i2c: bcm2835: Add brcm, bcm2711 compatible Stefan Wahren
2019-08-13 16:20   ` Stefan Wahren
2019-08-13 16:20   ` [PATCH V2 07/13] dt-bindings: i2c: bcm2835: Add brcm,bcm2711 compatible Stefan Wahren
2019-08-27 16:00   ` Rob Herring
2019-08-27 16:00     ` Rob Herring
2019-08-27 16:00     ` Rob Herring
2019-08-13 16:20 ` [PATCH V2 08/13] i2c: bcm2835: Avoid clk stretch quirk for BCM2711 Stefan Wahren
2019-08-13 16:20   ` Stefan Wahren
2019-08-13 16:20   ` Stefan Wahren
2019-08-14 19:36   ` Wolfram Sang
2019-08-14 19:36     ` Wolfram Sang
2019-08-17  7:32     ` Stefan Wahren
2019-08-17  7:32       ` Stefan Wahren
2019-08-17  7:32       ` Stefan Wahren
2019-08-17  8:30       ` Wolfram Sang
2019-08-17  8:30         ` Wolfram Sang
2019-08-13 16:20 ` [PATCH V2 09/13] dt-bindings: arm: Convert BCM2835 board/soc bindings to json-schema Stefan Wahren
2019-08-13 16:20   ` Stefan Wahren
2019-08-13 16:20   ` Stefan Wahren
2019-08-13 17:22   ` Rob Herring
2019-08-13 17:22     ` Rob Herring
2019-08-13 17:22     ` Rob Herring
2019-08-14 19:21     ` Stefan Wahren
2019-08-14 19:21       ` Stefan Wahren
2019-08-14 23:06       ` Rob Herring
2019-08-14 23:06         ` Rob Herring
2019-08-14 23:06         ` Rob Herring
2019-08-13 16:20 ` [PATCH V2 10/13] dt-bindings: arm: bcm2835: Add Raspberry Pi 4 to DT schema Stefan Wahren
2019-08-13 16:20   ` Stefan Wahren
2019-08-13 16:20   ` Stefan Wahren
2019-08-13 16:20 ` Stefan Wahren [this message]
2019-08-13 16:20   ` [PATCH V2 11/13] ARM: bcm: Add support for BCM2711 SoC Stefan Wahren
2019-08-13 16:20   ` Stefan Wahren
2019-09-10 14:13   ` Matthias Brugger
2019-09-10 14:13     ` Matthias Brugger
2019-09-10 14:13     ` Matthias Brugger
2019-08-13 16:20 ` [PATCH V2 12/13] ARM: dts: Add minimal Raspberry Pi 4 support Stefan Wahren
2019-08-13 16:20   ` Stefan Wahren
2019-08-13 16:20   ` Stefan Wahren
2019-08-13 16:20 ` [PATCH V2 13/13] MAINTAINERS: Add BCM2711 to BCM2835 ARCH Stefan Wahren
2019-08-13 16:20   ` Stefan Wahren
2019-08-13 16:20   ` Stefan Wahren
2019-08-13 20:42 ` [PATCH V2 00/13] ARM: Add minimal Raspberry Pi 4 support Eric Anholt
2019-08-13 20:42   ` Eric Anholt
2019-08-13 20:42   ` Eric Anholt

find likely ancestor, descendant, or conflicting patches for this message:
dfblob:5e5f1fa dfblob:b59c813 dfblob:5e5f1fa dfblob:b59c813
dfblob:5e5f1fa dfblob:b59c813 dfblob:39bcbea dfblob:7baa8c9
dfblob:1fa15b4 dfblob:39bcbea dfblob:7baa8c9 dfblob:1fa15b4
dfblob:39bcbea dfblob:7baa8c9 dfblob:1fa15b4
	(help)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1565713248-4906-12-git-send-email-wahrenst@gmx.net \
    --to=wahrenst@gmx.net \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=devicetree@vger.kernel.org \
    --cc=eric@anholt.net \
    --cc=f.fainelli@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-rpi-kernel@lists.infradead.org \
    --cc=mark.rutland@arm.com \
    --cc=mturquette@baylibre.com \
    --cc=rjui@broadcom.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=sbranden@broadcom.com \
    --cc=wsa@the-dreams.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Be sure your reply has a Subject: header at the top and a blank line before the message body.

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.