From: Manish Narani <manish.narani@xilinx.com> To: ulf.hansson@linaro.org, robh+dt@kernel.org, mark.rutland@arm.com, adrian.hunter@intel.com, michal.simek@xilinx.com, jolly.shah@xilinx.com, nava.manne@xilinx.com, rajan.vaja@xilinx.com, manish.narani@xilinx.com Cc: linux-mmc@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, git@xilinx.com Subject: [PATCH v5 7/8] dt-bindings: mmc: arasan: Document 'xlnx,zynqmp-8.9a' controller Date: Fri, 1 Nov 2019 11:35:52 +0530 [thread overview] Message-ID: <1572588353-110682-8-git-send-email-manish.narani@xilinx.com> (raw) In-Reply-To: <1572588353-110682-1-git-send-email-manish.narani@xilinx.com> dd documentation for 'xlnx,zynqmp-8.9a' SDHCI controller and optional properties followed by example. Signed-off-by: Manish Narani <manish.narani@xilinx.com> Reviewed-by: Rob Herring <robh@kernel.org> --- .../devicetree/bindings/mmc/arasan,sdhci.txt | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt index b51e40b2e0c5..6f28e9d612d9 100644 --- a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt +++ b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt @@ -15,6 +15,9 @@ Required Properties: - "arasan,sdhci-5.1": generic Arasan SDHCI 5.1 PHY - "rockchip,rk3399-sdhci-5.1", "arasan,sdhci-5.1": rk3399 eMMC PHY For this device it is strongly suggested to include arasan,soc-ctl-syscon. + - "xlnx,zynqmp-8.9a": ZynqMP SDHCI 8.9a PHY + For this device it is strongly suggested to include clock-output-names and + #clock-cells. - "ti,am654-sdhci-5.1", "arasan,sdhci-5.1": TI AM654 MMC PHY Note: This binding has been deprecated and moved to [5]. - "intel,lgm-sdhci-5.1-emmc", "arasan,sdhci-5.1": Intel LGM eMMC PHY @@ -47,6 +50,10 @@ Optional Properties: - xlnx,int-clock-stable-broken: when present, the controller always reports that the internal clock is stable even when it is not. + - xlnx,mio-bank: When specified, this will indicate the MIO bank number in + which the command and data lines are configured. If not specified, driver + will assume this as 0. + Example: sdhci@e0100000 { compatible = "arasan,sdhci-8.9a"; @@ -83,6 +90,18 @@ Example: #clock-cells = <0>; }; + sdhci: mmc@ff160000 { + compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a"; + interrupt-parent = <&gic>; + interrupts = <0 48 4>; + reg = <0x0 0xff160000 0x0 0x1000>; + clocks = <&clk200>, <&clk200>; + clock-names = "clk_xin", "clk_ahb"; + clock-output-names = "clk_out_sd0", "clk_in_sd0"; + #clock-cells = <1>; + arasan-clk-phase-sd-hs = <63>, <72>; + }; + emmc: sdhci@ec700000 { compatible = "intel,lgm-sdhci-5.1-emmc", "arasan,sdhci-5.1"; reg = <0xec700000 0x300>; -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Manish Narani <manish.narani@xilinx.com> To: ulf.hansson@linaro.org, robh+dt@kernel.org, mark.rutland@arm.com, adrian.hunter@intel.com, michal.simek@xilinx.com, jolly.shah@xilinx.com, nava.manne@xilinx.com, rajan.vaja@xilinx.com, manish.narani@xilinx.com Cc: devicetree@vger.kernel.org, linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, git@xilinx.com Subject: [PATCH v5 7/8] dt-bindings: mmc: arasan: Document 'xlnx, zynqmp-8.9a' controller Date: Fri, 1 Nov 2019 11:35:52 +0530 [thread overview] Message-ID: <1572588353-110682-8-git-send-email-manish.narani@xilinx.com> (raw) In-Reply-To: <1572588353-110682-1-git-send-email-manish.narani@xilinx.com> dd documentation for 'xlnx,zynqmp-8.9a' SDHCI controller and optional properties followed by example. Signed-off-by: Manish Narani <manish.narani@xilinx.com> Reviewed-by: Rob Herring <robh@kernel.org> --- .../devicetree/bindings/mmc/arasan,sdhci.txt | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt index b51e40b2e0c5..6f28e9d612d9 100644 --- a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt +++ b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt @@ -15,6 +15,9 @@ Required Properties: - "arasan,sdhci-5.1": generic Arasan SDHCI 5.1 PHY - "rockchip,rk3399-sdhci-5.1", "arasan,sdhci-5.1": rk3399 eMMC PHY For this device it is strongly suggested to include arasan,soc-ctl-syscon. + - "xlnx,zynqmp-8.9a": ZynqMP SDHCI 8.9a PHY + For this device it is strongly suggested to include clock-output-names and + #clock-cells. - "ti,am654-sdhci-5.1", "arasan,sdhci-5.1": TI AM654 MMC PHY Note: This binding has been deprecated and moved to [5]. - "intel,lgm-sdhci-5.1-emmc", "arasan,sdhci-5.1": Intel LGM eMMC PHY @@ -47,6 +50,10 @@ Optional Properties: - xlnx,int-clock-stable-broken: when present, the controller always reports that the internal clock is stable even when it is not. + - xlnx,mio-bank: When specified, this will indicate the MIO bank number in + which the command and data lines are configured. If not specified, driver + will assume this as 0. + Example: sdhci@e0100000 { compatible = "arasan,sdhci-8.9a"; @@ -83,6 +90,18 @@ Example: #clock-cells = <0>; }; + sdhci: mmc@ff160000 { + compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a"; + interrupt-parent = <&gic>; + interrupts = <0 48 4>; + reg = <0x0 0xff160000 0x0 0x1000>; + clocks = <&clk200>, <&clk200>; + clock-names = "clk_xin", "clk_ahb"; + clock-output-names = "clk_out_sd0", "clk_in_sd0"; + #clock-cells = <1>; + arasan-clk-phase-sd-hs = <63>, <72>; + }; + emmc: sdhci@ec700000 { compatible = "intel,lgm-sdhci-5.1-emmc", "arasan,sdhci-5.1"; reg = <0xec700000 0x300>; -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-11-01 6:06 UTC|newest] Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-11-01 6:05 [PATCH v5 0/8] Arasan SDHCI enhancements and ZynqMP Tap Delays Handling Manish Narani 2019-11-01 6:05 ` Manish Narani 2019-11-01 6:05 ` [PATCH v5 1/8] mmc: sdhci-of-arasan: Separate out clk related data to another structure Manish Narani 2019-11-01 6:05 ` Manish Narani 2019-11-01 6:05 ` [PATCH v5 2/8] dt-bindings: mmc: arasan: Update Documentation for the input clock Manish Narani 2019-11-01 6:05 ` Manish Narani 2019-11-01 6:05 ` Manish Narani 2019-11-01 6:05 ` [PATCH v5 3/8] mmc: sdhci-of-arasan: Add sampling clock for a phy to use Manish Narani 2019-11-01 6:05 ` Manish Narani 2019-11-01 6:05 ` [PATCH v5 4/8] dt-bindings: mmc: Add optional generic properties for mmc Manish Narani 2019-11-01 6:05 ` Manish Narani 2019-11-04 23:14 ` Rob Herring 2019-11-04 23:14 ` Rob Herring 2019-11-04 23:14 ` Rob Herring 2019-11-11 10:07 ` Manish Narani 2019-11-11 10:07 ` Manish Narani 2019-11-11 10:07 ` Manish Narani 2019-11-18 3:55 ` Manish Narani 2019-11-18 3:55 ` Manish Narani 2019-11-18 3:55 ` Manish Narani 2019-11-18 14:44 ` Rob Herring 2019-11-18 14:44 ` Rob Herring 2019-11-18 14:44 ` Rob Herring 2019-11-01 6:05 ` [PATCH v5 5/8] mmc: sdhci-of-arasan: Add support to set clock phase delays for SD Manish Narani 2019-11-01 6:05 ` Manish Narani 2019-11-01 6:05 ` [PATCH v5 6/8] firmware: xilinx: Add SDIO Tap Delay nodes Manish Narani 2019-11-01 6:05 ` Manish Narani 2019-11-01 6:05 ` Manish Narani [this message] 2019-11-01 6:05 ` [PATCH v5 7/8] dt-bindings: mmc: arasan: Document 'xlnx, zynqmp-8.9a' controller Manish Narani 2019-11-01 6:05 ` [PATCH v5 8/8] mmc: sdhci-of-arasan: Add support for ZynqMP Platform Tap Delays Setup Manish Narani 2019-11-01 6:05 ` Manish Narani
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1572588353-110682-8-git-send-email-manish.narani@xilinx.com \ --to=manish.narani@xilinx.com \ --cc=adrian.hunter@intel.com \ --cc=devicetree@vger.kernel.org \ --cc=git@xilinx.com \ --cc=jolly.shah@xilinx.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-mmc@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=michal.simek@xilinx.com \ --cc=nava.manne@xilinx.com \ --cc=rajan.vaja@xilinx.com \ --cc=robh+dt@kernel.org \ --cc=ulf.hansson@linaro.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.