From: Manish Narani <manish.narani@xilinx.com>
To: ulf.hansson@linaro.org, robh+dt@kernel.org, mark.rutland@arm.com,
adrian.hunter@intel.com, michal.simek@xilinx.com,
jolly.shah@xilinx.com, rajan.vaja@xilinx.com,
nava.manne@xilinx.com, mdf@kernel.org, manish.narani@xilinx.com
Cc: linux-mmc@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, git@xilinx.com
Subject: [PATCH v6 4/8] dt-bindings: mmc: Add optional generic properties for mmc
Date: Wed, 20 Nov 2019 12:17:25 +0530 [thread overview]
Message-ID: <1574232449-13570-5-git-send-email-manish.narani@xilinx.com> (raw)
In-Reply-To: <1574232449-13570-1-git-send-email-manish.narani@xilinx.com>
Add optional properties for mmc hosts which are used to set clk delays
for different speed modes in the controller.
Signed-off-by: Manish Narani <manish.narani@xilinx.com>
---
.../devicetree/bindings/mmc/mmc-controller.yaml | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
index 080754e0ef35..305b2016bc17 100644
--- a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
+++ b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
@@ -333,6 +333,18 @@ patternProperties:
required:
- reg
+ "^clk-phase-(legacy|sd-hs|mmc-(hs|hs[24]00|ddr52)|uhs-(sdr(12|25|50|104)|ddr50))$":
+ minItems: 2
+ maxItems: 2
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - minimum: 0
+ maximum: 359
+ description:
+ Set the clock (phase) delays which are to be configured in the
+ controller while switching to particular speed mode. These values
+ are in pair of degrees.
+
dependencies:
cd-debounce-delay-ms: [ cd-gpios ]
fixed-emmc-driver-type: [ non-removable ]
@@ -351,6 +363,7 @@ examples:
keep-power-in-suspend;
wakeup-source;
mmc-pwrseq = <&sdhci0_pwrseq>;
+ clk-phase-sd-hs = <63>, <72>;
};
- |
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Manish Narani <manish.narani@xilinx.com>
To: ulf.hansson@linaro.org, robh+dt@kernel.org, mark.rutland@arm.com,
adrian.hunter@intel.com, michal.simek@xilinx.com,
jolly.shah@xilinx.com, rajan.vaja@xilinx.com,
nava.manne@xilinx.com, mdf@kernel.org, manish.narani@xilinx.com
Cc: devicetree@vger.kernel.org, linux-mmc@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, git@xilinx.com
Subject: [PATCH v6 4/8] dt-bindings: mmc: Add optional generic properties for mmc
Date: Wed, 20 Nov 2019 12:17:25 +0530 [thread overview]
Message-ID: <1574232449-13570-5-git-send-email-manish.narani@xilinx.com> (raw)
In-Reply-To: <1574232449-13570-1-git-send-email-manish.narani@xilinx.com>
Add optional properties for mmc hosts which are used to set clk delays
for different speed modes in the controller.
Signed-off-by: Manish Narani <manish.narani@xilinx.com>
---
.../devicetree/bindings/mmc/mmc-controller.yaml | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
index 080754e0ef35..305b2016bc17 100644
--- a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
+++ b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
@@ -333,6 +333,18 @@ patternProperties:
required:
- reg
+ "^clk-phase-(legacy|sd-hs|mmc-(hs|hs[24]00|ddr52)|uhs-(sdr(12|25|50|104)|ddr50))$":
+ minItems: 2
+ maxItems: 2
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - minimum: 0
+ maximum: 359
+ description:
+ Set the clock (phase) delays which are to be configured in the
+ controller while switching to particular speed mode. These values
+ are in pair of degrees.
+
dependencies:
cd-debounce-delay-ms: [ cd-gpios ]
fixed-emmc-driver-type: [ non-removable ]
@@ -351,6 +363,7 @@ examples:
keep-power-in-suspend;
wakeup-source;
mmc-pwrseq = <&sdhci0_pwrseq>;
+ clk-phase-sd-hs = <63>, <72>;
};
- |
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-11-20 6:48 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-20 6:47 [PATCH v6 0/8] Arasan SDHCI enhancements and ZynqMP Tap Delays Handling Manish Narani
2019-11-20 6:47 ` Manish Narani
2019-11-20 6:47 ` Manish Narani
2019-11-20 6:47 ` [PATCH v6 1/8] mmc: sdhci-of-arasan: Separate out clk related data to another structure Manish Narani
2019-11-20 6:47 ` Manish Narani
2019-11-20 6:47 ` [PATCH v6 2/8] dt-bindings: mmc: arasan: Update Documentation for the input clock Manish Narani
2019-11-20 6:47 ` Manish Narani
2019-11-20 6:47 ` [PATCH v6 3/8] mmc: sdhci-of-arasan: Add sampling clock for a phy to use Manish Narani
2019-11-20 6:47 ` Manish Narani
2019-11-20 6:47 ` Manish Narani [this message]
2019-11-20 6:47 ` [PATCH v6 4/8] dt-bindings: mmc: Add optional generic properties for mmc Manish Narani
2019-11-21 19:01 ` Rob Herring
2019-11-21 19:01 ` Rob Herring
2019-11-22 6:53 ` Ulf Hansson
2019-11-22 6:53 ` Ulf Hansson
2019-11-20 6:47 ` [PATCH v6 5/8] mmc: sdhci-of-arasan: Add support to set clock phase delays for SD Manish Narani
2019-11-20 6:47 ` Manish Narani
2019-11-20 6:47 ` [PATCH v6 6/8] firmware: xilinx: Add SDIO Tap Delay nodes Manish Narani
2019-11-20 6:47 ` Manish Narani
2019-11-20 6:47 ` [PATCH v6 7/8] dt-bindings: mmc: arasan: Document 'xlnx,zynqmp-8.9a' controller Manish Narani
2019-11-20 6:47 ` [PATCH v6 7/8] dt-bindings: mmc: arasan: Document 'xlnx, zynqmp-8.9a' controller Manish Narani
2019-11-20 6:47 ` Manish Narani
2019-11-20 6:47 ` [PATCH v6 8/8] mmc: sdhci-of-arasan: Add support for ZynqMP Platform Tap Delays Setup Manish Narani
2019-11-20 6:47 ` Manish Narani
2019-11-20 12:59 ` [PATCH v6 0/8] Arasan SDHCI enhancements and ZynqMP Tap Delays Handling Ulf Hansson
2019-11-20 12:59 ` Ulf Hansson
2019-11-21 7:08 ` Manish Narani
2019-11-21 7:08 ` Manish Narani
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1574232449-13570-5-git-send-email-manish.narani@xilinx.com \
--to=manish.narani@xilinx.com \
--cc=adrian.hunter@intel.com \
--cc=devicetree@vger.kernel.org \
--cc=git@xilinx.com \
--cc=jolly.shah@xilinx.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mdf@kernel.org \
--cc=michal.simek@xilinx.com \
--cc=nava.manne@xilinx.com \
--cc=rajan.vaja@xilinx.com \
--cc=robh+dt@kernel.org \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.