From: Claudiu Beznea <claudiu.beznea@microchip.com> To: <linux@armlinux.org.uk>, <nicolas.ferre@microchip.com>, <alexandre.belloni@bootlin.com>, <ludovic.desroches@microchip.com>, <sre@kernel.org> Cc: <linux-arm-kernel@lists.infradead.org>, <linux-kernel@vger.kernel.org>, <linux-pm@vger.kernel.org>, Claudiu Beznea <claudiu.beznea@microchip.com> Subject: [PATCH v3 0/9] SoC and defconfig support for SAM9X60 Date: Fri, 29 Nov 2019 15:51:36 +0200 [thread overview] Message-ID: <1575035505-6310-1-git-send-email-claudiu.beznea@microchip.com> (raw) Hi, This series enables proper support for SAM9X60 in Kconfig and defconfig. Thank you, Claudiu Beznea Changes in v3: - move patch "ARM: at91: Kconfig: add config flag for SAM9X60 SoC" before the patches that uses CONFIG_SOC_SAM9X60 - sqash defconfig patches (except the savedefconfig one) Changes in v2: - cahnged cover letter title; previously it was: "add defconfig support for SAM9X60" - have new entry in arch/arm/mach-at91/Kconfig for SOC_SAM9X60 independent of SOC_AT91SAM9 to be able to select only necessary config flags for SAM9X60 (patches 02/17, 03/17) - select POWER_RESET_AT91_RESET and POWER_RESET_AT91_SAMA5D2_SHDWC as for SAMA5D2 (patches 04/17, 05/17) - select DEBUG_AT91_RM9200_DBGU (patch 06/17) - shaped a bit the patches titles and commit desciptions for defconfig patches (patches 09-17/17) Claudiu Beznea (9): ARM: at91: Kconfig: add sam9x60 pll config flag ARM: at91: Kconfig: add config flag for SAM9X60 SoC ARM: at91: pm: move SAM9X60's PM under its own SoC config flag drivers: soc: atmel: move sam9x60 under its own config flag power: reset: Kconfig: select POWER_RESET_AT91_RESET for sam9x60 drivers: soc: atmel: select POWER_RESET_AT91_SAMA5D2_SHDWC for sam9x60 ARM: debug-ll: select DEBUG_AT91_RM9200_DBGU for sam9x60 ARM: at91/defconfig: use savedefconfig ARM: at91/defconfig: enable config flags for sam9x60 SoC arch/arm/Kconfig.debug | 6 ++--- arch/arm/configs/at91_dt_defconfig | 55 ++++++++++++++++++-------------------- arch/arm/mach-at91/Kconfig | 24 +++++++++++++++-- arch/arm/mach-at91/Makefile | 1 + arch/arm/mach-at91/at91sam9.c | 18 ------------- arch/arm/mach-at91/pm.c | 2 +- arch/arm/mach-at91/sam9x60.c | 34 +++++++++++++++++++++++ drivers/power/reset/Kconfig | 4 +-- drivers/soc/atmel/soc.c | 5 ++-- 9 files changed, 92 insertions(+), 57 deletions(-) create mode 100644 arch/arm/mach-at91/sam9x60.c -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Claudiu Beznea <claudiu.beznea@microchip.com> To: <linux@armlinux.org.uk>, <nicolas.ferre@microchip.com>, <alexandre.belloni@bootlin.com>, <ludovic.desroches@microchip.com>, <sre@kernel.org> Cc: Claudiu Beznea <claudiu.beznea@microchip.com>, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-pm@vger.kernel.org Subject: [PATCH v3 0/9] SoC and defconfig support for SAM9X60 Date: Fri, 29 Nov 2019 15:51:36 +0200 [thread overview] Message-ID: <1575035505-6310-1-git-send-email-claudiu.beznea@microchip.com> (raw) Hi, This series enables proper support for SAM9X60 in Kconfig and defconfig. Thank you, Claudiu Beznea Changes in v3: - move patch "ARM: at91: Kconfig: add config flag for SAM9X60 SoC" before the patches that uses CONFIG_SOC_SAM9X60 - sqash defconfig patches (except the savedefconfig one) Changes in v2: - cahnged cover letter title; previously it was: "add defconfig support for SAM9X60" - have new entry in arch/arm/mach-at91/Kconfig for SOC_SAM9X60 independent of SOC_AT91SAM9 to be able to select only necessary config flags for SAM9X60 (patches 02/17, 03/17) - select POWER_RESET_AT91_RESET and POWER_RESET_AT91_SAMA5D2_SHDWC as for SAMA5D2 (patches 04/17, 05/17) - select DEBUG_AT91_RM9200_DBGU (patch 06/17) - shaped a bit the patches titles and commit desciptions for defconfig patches (patches 09-17/17) Claudiu Beznea (9): ARM: at91: Kconfig: add sam9x60 pll config flag ARM: at91: Kconfig: add config flag for SAM9X60 SoC ARM: at91: pm: move SAM9X60's PM under its own SoC config flag drivers: soc: atmel: move sam9x60 under its own config flag power: reset: Kconfig: select POWER_RESET_AT91_RESET for sam9x60 drivers: soc: atmel: select POWER_RESET_AT91_SAMA5D2_SHDWC for sam9x60 ARM: debug-ll: select DEBUG_AT91_RM9200_DBGU for sam9x60 ARM: at91/defconfig: use savedefconfig ARM: at91/defconfig: enable config flags for sam9x60 SoC arch/arm/Kconfig.debug | 6 ++--- arch/arm/configs/at91_dt_defconfig | 55 ++++++++++++++++++-------------------- arch/arm/mach-at91/Kconfig | 24 +++++++++++++++-- arch/arm/mach-at91/Makefile | 1 + arch/arm/mach-at91/at91sam9.c | 18 ------------- arch/arm/mach-at91/pm.c | 2 +- arch/arm/mach-at91/sam9x60.c | 34 +++++++++++++++++++++++ drivers/power/reset/Kconfig | 4 +-- drivers/soc/atmel/soc.c | 5 ++-- 9 files changed, 92 insertions(+), 57 deletions(-) create mode 100644 arch/arm/mach-at91/sam9x60.c -- 2.7.4 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2019-11-29 13:51 UTC|newest] Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-11-29 13:51 Claudiu Beznea [this message] 2019-11-29 13:51 ` [PATCH v3 0/9] SoC and defconfig support for SAM9X60 Claudiu Beznea 2019-11-29 13:51 ` [PATCH v3 1/9] ARM: at91: Kconfig: add sam9x60 pll config flag Claudiu Beznea 2019-11-29 13:51 ` Claudiu Beznea 2019-11-29 13:51 ` [PATCH v3 2/9] ARM: at91: Kconfig: add config flag for SAM9X60 SoC Claudiu Beznea 2019-11-29 13:51 ` Claudiu Beznea 2019-11-29 13:51 ` [PATCH v3 3/9] ARM: at91: pm: move SAM9X60's PM under its own SoC config flag Claudiu Beznea 2019-11-29 13:51 ` Claudiu Beznea 2019-11-29 13:51 ` [PATCH v3 4/9] drivers: soc: atmel: move sam9x60 under its own " Claudiu Beznea 2019-11-29 13:51 ` Claudiu Beznea 2019-11-29 13:51 ` [PATCH v3 5/9] power: reset: Kconfig: select POWER_RESET_AT91_RESET for sam9x60 Claudiu Beznea 2019-11-29 13:51 ` Claudiu Beznea 2019-11-29 13:51 ` [PATCH v3 6/9] drivers: soc: atmel: select POWER_RESET_AT91_SAMA5D2_SHDWC " Claudiu Beznea 2019-11-29 13:51 ` Claudiu Beznea 2019-11-29 13:51 ` [PATCH v3 7/9] ARM: debug-ll: select DEBUG_AT91_RM9200_DBGU " Claudiu Beznea 2019-11-29 13:51 ` Claudiu Beznea 2019-11-29 13:51 ` [PATCH v3 8/9] ARM: at91/defconfig: use savedefconfig Claudiu Beznea 2019-11-29 13:51 ` Claudiu Beznea 2019-11-29 13:51 ` [PATCH v3 9/9] ARM: at91/defconfig: enable config flags for sam9x60 SoC Claudiu Beznea 2019-11-29 13:51 ` Claudiu Beznea 2019-12-09 23:45 ` [PATCH v3 0/9] SoC and defconfig support for SAM9X60 Alexandre Belloni 2019-12-09 23:45 ` Alexandre Belloni
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1575035505-6310-1-git-send-email-claudiu.beznea@microchip.com \ --to=claudiu.beznea@microchip.com \ --cc=alexandre.belloni@bootlin.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-pm@vger.kernel.org \ --cc=linux@armlinux.org.uk \ --cc=ludovic.desroches@microchip.com \ --cc=nicolas.ferre@microchip.com \ --cc=sre@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.