All of lore.kernel.org
 help / color / mirror / Atom feed
From: CK Hu <ck.hu@mediatek.com>
To: Bibby Hsieh <bibby.hsieh@mediatek.com>
Cc: David Airlie <airlied@linux.ie>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Daniel Vetter <daniel.vetter@ffwll.ch>,
	<dri-devel@lists.freedesktop.org>,
	<linux-mediatek@lists.infradead.org>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	YT Shen <yt.shen@mediatek.com>,
	Thierry Reding <thierry.reding@gmail.com>,
	<linux-arm-kernel@lists.infradead.org>, <tfiga@chromium.org>,
	<drinkcat@chromium.org>, <linux-kernel@vger.kernel.org>,
	<srv_heupstream@mediatek.com>,
	Yongqiang Niu <yongqiang.niu@mediatek.com>
Subject: Re: [PATCH v3 5/6] drm/mediatek: support CMDQ interface in ddp component
Date: Thu, 5 Dec 2019 12:50:48 +0800	[thread overview]
Message-ID: <1575521448.24783.11.camel@mtksdaap41> (raw)
In-Reply-To: <20191204094441.5116-6-bibby.hsieh@mediatek.com>

Hi, Bibby:

On Wed, 2019-12-04 at 17:44 +0800, Bibby Hsieh wrote:
> The CMDQ (Command Queue) in MT8183 is used to help
> update all relevant display controller registers
> with critical time limation.
> This patch add cmdq interface in ddp_comp interface,
> let all ddp_comp interface can support cpu/cmdq function
> at the same time.
> 
> Signed-off-by: YT Shen <yt.shen@mediatek.com>
> Signed-off-by: CK Hu <ck.hu@mediatek.com>
> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
> Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
> Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
> ---
>  drivers/gpu/drm/mediatek/mtk_disp_color.c   |   7 +-
>  drivers/gpu/drm/mediatek/mtk_disp_ovl.c     |  65 +++++-----
>  drivers/gpu/drm/mediatek/mtk_disp_rdma.c    |  43 ++++---
>  drivers/gpu/drm/mediatek/mtk_drm_crtc.c     |   8 +-
>  drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 136 +++++++++++++++-----
>  drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h |  31 +++--
>  6 files changed, 197 insertions(+), 93 deletions(-)
> 

[snip]

> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> index 3407d38aff8f..e93e46726de6 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> @@ -12,7 +12,8 @@
>  #include <linux/of_irq.h>
>  #include <linux/of_platform.h>
>  #include <linux/platform_device.h>
> -
> +#include <drm/drmP.h>
> +#include <linux/soc/mediatek/mtk-cmdq.h>
>  #include "mtk_drm_drv.h"
>  #include "mtk_drm_plane.h"
>  #include "mtk_drm_ddp_comp.h"
> @@ -76,36 +77,82 @@
>  #define DITHER_ADD_LSHIFT_G(x)			(((x) & 0x7) << 4)
>  #define DITHER_ADD_RSHIFT_G(x)			(((x) & 0x7) << 0)
>  
> +void mtk_ddp_write(struct cmdq_pkt *cmdq_pkt, unsigned int value,
> +		   struct mtk_ddp_comp *comp, unsigned int offset)
> +{
> +	if (cmdq_pkt)
> +#ifdef CONFIG_MTK_CMDQ
> +		cmdq_pkt_write(cmdq_pkt, comp->subsys,
> +			       comp->regs_pa + offset, value);
> +#endif
> +	else
> +		writel(value, comp->regs + offset);

If CONFIG_MTK_CMDQ is not defined, this code would become

	if (cmdq_pkt)

	else
		writel(value, comp->regs + offset);

> +}
> +
> +void mtk_ddp_write_relaxed(struct cmdq_pkt *cmdq_pkt, unsigned int value,
> +			   struct mtk_ddp_comp *comp,
> +			   unsigned int offset)
> +{
> +	if (cmdq_pkt)
> +#ifdef CONFIG_MTK_CMDQ
> +		cmdq_pkt_write(cmdq_pkt, comp->subsys,
> +			       comp->regs_pa + offset, value);
> +#endif
> +	else
> +		writel_relaxed(value, comp->regs + offset);
> +}
> +
> +void mtk_ddp_write_mask(struct cmdq_pkt *cmdq_pkt,
> +			unsigned int value,
> +			struct mtk_ddp_comp *comp,
> +			unsigned int offset,
> +			unsigned int mask)
> +{
> +	if (cmdq_pkt) {
> +#ifdef CONFIG_MTK_CMDQ
> +		cmdq_pkt_write_mask(cmdq_pkt, comp->subsys,
> +				    comp->regs_pa + offset, value, mask);
> +#endif
> +	} else {
> +		u32 tmp = readl(comp->regs + offset);
> +
> +		tmp = (tmp & ~mask) | (value & mask);
> +		writel(tmp, comp->regs + offset);
> +	}
> +}
> +

[snip]

>  
>  static void mtk_gamma_start(struct mtk_ddp_comp *comp)
> @@ -324,6 +371,9 @@ int mtk_ddp_comp_init(struct device *dev, struct device_node *node,
>  		      const struct mtk_ddp_comp_funcs *funcs)
>  {
>  	struct platform_device *comp_pdev;
> +	struct resource res;
> +	struct cmdq_client_reg *cmdq_reg;

I think you could simply defined as below, so you need not to allocate
and free.

struct cmdq_client_reg cmdq_reg;

Regards,
CK

> +	int ret = 0;
>  
>  	if (comp_id < 0 || comp_id >= DDP_COMPONENT_ID_MAX)
>  		return -EINVAL;
> @@ -358,6 +408,34 @@ int mtk_ddp_comp_init(struct device *dev, struct device_node *node,
>  	}
>  	comp->dev = &comp_pdev->dev;
>  
> +#ifdef CONFIG_MTK_CMDQ
> +	if (of_address_to_resource(node, 0, &res) != 0) {
> +		dev_err(dev, "Missing reg in %s node\n",
> +			node->full_name);
> +		return -EINVAL;
> +	}
> +	comp->regs_pa = res.start;
> +
> +	comp_pdev = of_find_device_by_node(node);
> +	if (!comp_pdev) {
> +		dev_warn(dev, "Waiting for component device %s\n",
> +			 node->full_name);
> +		return -EPROBE_DEFER;
> +	}
> +
> +	cmdq_reg = kzalloc(sizeof(*cmdq_reg), GFP_KERNEL);
> +	if (!cmdq_reg)
> +		return -EINVAL;
> +
> +	ret = cmdq_dev_get_client_reg(&comp_pdev->dev, cmdq_reg, 0);
> +	if (ret != 0)
> +		dev_dbg(&comp_pdev->dev,
> +			"get mediatek,gce-client-reg fail!\n");
> +	else
> +		comp->subsys = cmdq_reg->subsys;
> +
> +	kfree(cmdq_reg);
> +#endif
>  	return 0;
>  }
>  



WARNING: multiple messages have this Message-ID (diff)
From: CK Hu <ck.hu@mediatek.com>
To: Bibby Hsieh <bibby.hsieh@mediatek.com>
Cc: drinkcat@chromium.org, Yongqiang Niu <yongqiang.niu@mediatek.com>,
	srv_heupstream@mediatek.com, David Airlie <airlied@linux.ie>,
	Daniel Vetter <daniel.vetter@ffwll.ch>,
	linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
	tfiga@chromium.org, Thierry Reding <thierry.reding@gmail.com>,
	linux-mediatek@lists.infradead.org,
	Philipp Zabel <p.zabel@pengutronix.de>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v3 5/6] drm/mediatek: support CMDQ interface in ddp component
Date: Thu, 5 Dec 2019 12:50:48 +0800	[thread overview]
Message-ID: <1575521448.24783.11.camel@mtksdaap41> (raw)
In-Reply-To: <20191204094441.5116-6-bibby.hsieh@mediatek.com>

Hi, Bibby:

On Wed, 2019-12-04 at 17:44 +0800, Bibby Hsieh wrote:
> The CMDQ (Command Queue) in MT8183 is used to help
> update all relevant display controller registers
> with critical time limation.
> This patch add cmdq interface in ddp_comp interface,
> let all ddp_comp interface can support cpu/cmdq function
> at the same time.
> 
> Signed-off-by: YT Shen <yt.shen@mediatek.com>
> Signed-off-by: CK Hu <ck.hu@mediatek.com>
> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
> Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
> Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
> ---
>  drivers/gpu/drm/mediatek/mtk_disp_color.c   |   7 +-
>  drivers/gpu/drm/mediatek/mtk_disp_ovl.c     |  65 +++++-----
>  drivers/gpu/drm/mediatek/mtk_disp_rdma.c    |  43 ++++---
>  drivers/gpu/drm/mediatek/mtk_drm_crtc.c     |   8 +-
>  drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 136 +++++++++++++++-----
>  drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h |  31 +++--
>  6 files changed, 197 insertions(+), 93 deletions(-)
> 

[snip]

> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> index 3407d38aff8f..e93e46726de6 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> @@ -12,7 +12,8 @@
>  #include <linux/of_irq.h>
>  #include <linux/of_platform.h>
>  #include <linux/platform_device.h>
> -
> +#include <drm/drmP.h>
> +#include <linux/soc/mediatek/mtk-cmdq.h>
>  #include "mtk_drm_drv.h"
>  #include "mtk_drm_plane.h"
>  #include "mtk_drm_ddp_comp.h"
> @@ -76,36 +77,82 @@
>  #define DITHER_ADD_LSHIFT_G(x)			(((x) & 0x7) << 4)
>  #define DITHER_ADD_RSHIFT_G(x)			(((x) & 0x7) << 0)
>  
> +void mtk_ddp_write(struct cmdq_pkt *cmdq_pkt, unsigned int value,
> +		   struct mtk_ddp_comp *comp, unsigned int offset)
> +{
> +	if (cmdq_pkt)
> +#ifdef CONFIG_MTK_CMDQ
> +		cmdq_pkt_write(cmdq_pkt, comp->subsys,
> +			       comp->regs_pa + offset, value);
> +#endif
> +	else
> +		writel(value, comp->regs + offset);

If CONFIG_MTK_CMDQ is not defined, this code would become

	if (cmdq_pkt)

	else
		writel(value, comp->regs + offset);

> +}
> +
> +void mtk_ddp_write_relaxed(struct cmdq_pkt *cmdq_pkt, unsigned int value,
> +			   struct mtk_ddp_comp *comp,
> +			   unsigned int offset)
> +{
> +	if (cmdq_pkt)
> +#ifdef CONFIG_MTK_CMDQ
> +		cmdq_pkt_write(cmdq_pkt, comp->subsys,
> +			       comp->regs_pa + offset, value);
> +#endif
> +	else
> +		writel_relaxed(value, comp->regs + offset);
> +}
> +
> +void mtk_ddp_write_mask(struct cmdq_pkt *cmdq_pkt,
> +			unsigned int value,
> +			struct mtk_ddp_comp *comp,
> +			unsigned int offset,
> +			unsigned int mask)
> +{
> +	if (cmdq_pkt) {
> +#ifdef CONFIG_MTK_CMDQ
> +		cmdq_pkt_write_mask(cmdq_pkt, comp->subsys,
> +				    comp->regs_pa + offset, value, mask);
> +#endif
> +	} else {
> +		u32 tmp = readl(comp->regs + offset);
> +
> +		tmp = (tmp & ~mask) | (value & mask);
> +		writel(tmp, comp->regs + offset);
> +	}
> +}
> +

[snip]

>  
>  static void mtk_gamma_start(struct mtk_ddp_comp *comp)
> @@ -324,6 +371,9 @@ int mtk_ddp_comp_init(struct device *dev, struct device_node *node,
>  		      const struct mtk_ddp_comp_funcs *funcs)
>  {
>  	struct platform_device *comp_pdev;
> +	struct resource res;
> +	struct cmdq_client_reg *cmdq_reg;

I think you could simply defined as below, so you need not to allocate
and free.

struct cmdq_client_reg cmdq_reg;

Regards,
CK

> +	int ret = 0;
>  
>  	if (comp_id < 0 || comp_id >= DDP_COMPONENT_ID_MAX)
>  		return -EINVAL;
> @@ -358,6 +408,34 @@ int mtk_ddp_comp_init(struct device *dev, struct device_node *node,
>  	}
>  	comp->dev = &comp_pdev->dev;
>  
> +#ifdef CONFIG_MTK_CMDQ
> +	if (of_address_to_resource(node, 0, &res) != 0) {
> +		dev_err(dev, "Missing reg in %s node\n",
> +			node->full_name);
> +		return -EINVAL;
> +	}
> +	comp->regs_pa = res.start;
> +
> +	comp_pdev = of_find_device_by_node(node);
> +	if (!comp_pdev) {
> +		dev_warn(dev, "Waiting for component device %s\n",
> +			 node->full_name);
> +		return -EPROBE_DEFER;
> +	}
> +
> +	cmdq_reg = kzalloc(sizeof(*cmdq_reg), GFP_KERNEL);
> +	if (!cmdq_reg)
> +		return -EINVAL;
> +
> +	ret = cmdq_dev_get_client_reg(&comp_pdev->dev, cmdq_reg, 0);
> +	if (ret != 0)
> +		dev_dbg(&comp_pdev->dev,
> +			"get mediatek,gce-client-reg fail!\n");
> +	else
> +		comp->subsys = cmdq_reg->subsys;
> +
> +	kfree(cmdq_reg);
> +#endif
>  	return 0;
>  }
>  


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

WARNING: multiple messages have this Message-ID (diff)
From: CK Hu <ck.hu@mediatek.com>
To: Bibby Hsieh <bibby.hsieh@mediatek.com>
Cc: drinkcat@chromium.org, Yongqiang Niu <yongqiang.niu@mediatek.com>,
	srv_heupstream@mediatek.com, David Airlie <airlied@linux.ie>,
	Daniel Vetter <daniel.vetter@ffwll.ch>,
	linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
	tfiga@chromium.org, YT Shen <yt.shen@mediatek.com>,
	Thierry Reding <thierry.reding@gmail.com>,
	linux-mediatek@lists.infradead.org,
	Philipp Zabel <p.zabel@pengutronix.de>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v3 5/6] drm/mediatek: support CMDQ interface in ddp component
Date: Thu, 5 Dec 2019 12:50:48 +0800	[thread overview]
Message-ID: <1575521448.24783.11.camel@mtksdaap41> (raw)
In-Reply-To: <20191204094441.5116-6-bibby.hsieh@mediatek.com>

Hi, Bibby:

On Wed, 2019-12-04 at 17:44 +0800, Bibby Hsieh wrote:
> The CMDQ (Command Queue) in MT8183 is used to help
> update all relevant display controller registers
> with critical time limation.
> This patch add cmdq interface in ddp_comp interface,
> let all ddp_comp interface can support cpu/cmdq function
> at the same time.
> 
> Signed-off-by: YT Shen <yt.shen@mediatek.com>
> Signed-off-by: CK Hu <ck.hu@mediatek.com>
> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
> Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
> Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
> ---
>  drivers/gpu/drm/mediatek/mtk_disp_color.c   |   7 +-
>  drivers/gpu/drm/mediatek/mtk_disp_ovl.c     |  65 +++++-----
>  drivers/gpu/drm/mediatek/mtk_disp_rdma.c    |  43 ++++---
>  drivers/gpu/drm/mediatek/mtk_drm_crtc.c     |   8 +-
>  drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 136 +++++++++++++++-----
>  drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h |  31 +++--
>  6 files changed, 197 insertions(+), 93 deletions(-)
> 

[snip]

> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> index 3407d38aff8f..e93e46726de6 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> @@ -12,7 +12,8 @@
>  #include <linux/of_irq.h>
>  #include <linux/of_platform.h>
>  #include <linux/platform_device.h>
> -
> +#include <drm/drmP.h>
> +#include <linux/soc/mediatek/mtk-cmdq.h>
>  #include "mtk_drm_drv.h"
>  #include "mtk_drm_plane.h"
>  #include "mtk_drm_ddp_comp.h"
> @@ -76,36 +77,82 @@
>  #define DITHER_ADD_LSHIFT_G(x)			(((x) & 0x7) << 4)
>  #define DITHER_ADD_RSHIFT_G(x)			(((x) & 0x7) << 0)
>  
> +void mtk_ddp_write(struct cmdq_pkt *cmdq_pkt, unsigned int value,
> +		   struct mtk_ddp_comp *comp, unsigned int offset)
> +{
> +	if (cmdq_pkt)
> +#ifdef CONFIG_MTK_CMDQ
> +		cmdq_pkt_write(cmdq_pkt, comp->subsys,
> +			       comp->regs_pa + offset, value);
> +#endif
> +	else
> +		writel(value, comp->regs + offset);

If CONFIG_MTK_CMDQ is not defined, this code would become

	if (cmdq_pkt)

	else
		writel(value, comp->regs + offset);

> +}
> +
> +void mtk_ddp_write_relaxed(struct cmdq_pkt *cmdq_pkt, unsigned int value,
> +			   struct mtk_ddp_comp *comp,
> +			   unsigned int offset)
> +{
> +	if (cmdq_pkt)
> +#ifdef CONFIG_MTK_CMDQ
> +		cmdq_pkt_write(cmdq_pkt, comp->subsys,
> +			       comp->regs_pa + offset, value);
> +#endif
> +	else
> +		writel_relaxed(value, comp->regs + offset);
> +}
> +
> +void mtk_ddp_write_mask(struct cmdq_pkt *cmdq_pkt,
> +			unsigned int value,
> +			struct mtk_ddp_comp *comp,
> +			unsigned int offset,
> +			unsigned int mask)
> +{
> +	if (cmdq_pkt) {
> +#ifdef CONFIG_MTK_CMDQ
> +		cmdq_pkt_write_mask(cmdq_pkt, comp->subsys,
> +				    comp->regs_pa + offset, value, mask);
> +#endif
> +	} else {
> +		u32 tmp = readl(comp->regs + offset);
> +
> +		tmp = (tmp & ~mask) | (value & mask);
> +		writel(tmp, comp->regs + offset);
> +	}
> +}
> +

[snip]

>  
>  static void mtk_gamma_start(struct mtk_ddp_comp *comp)
> @@ -324,6 +371,9 @@ int mtk_ddp_comp_init(struct device *dev, struct device_node *node,
>  		      const struct mtk_ddp_comp_funcs *funcs)
>  {
>  	struct platform_device *comp_pdev;
> +	struct resource res;
> +	struct cmdq_client_reg *cmdq_reg;

I think you could simply defined as below, so you need not to allocate
and free.

struct cmdq_client_reg cmdq_reg;

Regards,
CK

> +	int ret = 0;
>  
>  	if (comp_id < 0 || comp_id >= DDP_COMPONENT_ID_MAX)
>  		return -EINVAL;
> @@ -358,6 +408,34 @@ int mtk_ddp_comp_init(struct device *dev, struct device_node *node,
>  	}
>  	comp->dev = &comp_pdev->dev;
>  
> +#ifdef CONFIG_MTK_CMDQ
> +	if (of_address_to_resource(node, 0, &res) != 0) {
> +		dev_err(dev, "Missing reg in %s node\n",
> +			node->full_name);
> +		return -EINVAL;
> +	}
> +	comp->regs_pa = res.start;
> +
> +	comp_pdev = of_find_device_by_node(node);
> +	if (!comp_pdev) {
> +		dev_warn(dev, "Waiting for component device %s\n",
> +			 node->full_name);
> +		return -EPROBE_DEFER;
> +	}
> +
> +	cmdq_reg = kzalloc(sizeof(*cmdq_reg), GFP_KERNEL);
> +	if (!cmdq_reg)
> +		return -EINVAL;
> +
> +	ret = cmdq_dev_get_client_reg(&comp_pdev->dev, cmdq_reg, 0);
> +	if (ret != 0)
> +		dev_dbg(&comp_pdev->dev,
> +			"get mediatek,gce-client-reg fail!\n");
> +	else
> +		comp->subsys = cmdq_reg->subsys;
> +
> +	kfree(cmdq_reg);
> +#endif
>  	return 0;
>  }
>  


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: CK Hu <ck.hu@mediatek.com>
To: Bibby Hsieh <bibby.hsieh@mediatek.com>
Cc: drinkcat@chromium.org, Yongqiang Niu <yongqiang.niu@mediatek.com>,
	srv_heupstream@mediatek.com, David Airlie <airlied@linux.ie>,
	Daniel Vetter <daniel.vetter@ffwll.ch>,
	linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
	tfiga@chromium.org, Thierry Reding <thierry.reding@gmail.com>,
	linux-mediatek@lists.infradead.org,
	Matthias Brugger <matthias.bgg@gmail.com>,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v3 5/6] drm/mediatek: support CMDQ interface in ddp component
Date: Thu, 5 Dec 2019 12:50:48 +0800	[thread overview]
Message-ID: <1575521448.24783.11.camel@mtksdaap41> (raw)
In-Reply-To: <20191204094441.5116-6-bibby.hsieh@mediatek.com>

Hi, Bibby:

On Wed, 2019-12-04 at 17:44 +0800, Bibby Hsieh wrote:
> The CMDQ (Command Queue) in MT8183 is used to help
> update all relevant display controller registers
> with critical time limation.
> This patch add cmdq interface in ddp_comp interface,
> let all ddp_comp interface can support cpu/cmdq function
> at the same time.
> 
> Signed-off-by: YT Shen <yt.shen@mediatek.com>
> Signed-off-by: CK Hu <ck.hu@mediatek.com>
> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
> Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
> Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
> ---
>  drivers/gpu/drm/mediatek/mtk_disp_color.c   |   7 +-
>  drivers/gpu/drm/mediatek/mtk_disp_ovl.c     |  65 +++++-----
>  drivers/gpu/drm/mediatek/mtk_disp_rdma.c    |  43 ++++---
>  drivers/gpu/drm/mediatek/mtk_drm_crtc.c     |   8 +-
>  drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 136 +++++++++++++++-----
>  drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h |  31 +++--
>  6 files changed, 197 insertions(+), 93 deletions(-)
> 

[snip]

> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> index 3407d38aff8f..e93e46726de6 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> @@ -12,7 +12,8 @@
>  #include <linux/of_irq.h>
>  #include <linux/of_platform.h>
>  #include <linux/platform_device.h>
> -
> +#include <drm/drmP.h>
> +#include <linux/soc/mediatek/mtk-cmdq.h>
>  #include "mtk_drm_drv.h"
>  #include "mtk_drm_plane.h"
>  #include "mtk_drm_ddp_comp.h"
> @@ -76,36 +77,82 @@
>  #define DITHER_ADD_LSHIFT_G(x)			(((x) & 0x7) << 4)
>  #define DITHER_ADD_RSHIFT_G(x)			(((x) & 0x7) << 0)
>  
> +void mtk_ddp_write(struct cmdq_pkt *cmdq_pkt, unsigned int value,
> +		   struct mtk_ddp_comp *comp, unsigned int offset)
> +{
> +	if (cmdq_pkt)
> +#ifdef CONFIG_MTK_CMDQ
> +		cmdq_pkt_write(cmdq_pkt, comp->subsys,
> +			       comp->regs_pa + offset, value);
> +#endif
> +	else
> +		writel(value, comp->regs + offset);

If CONFIG_MTK_CMDQ is not defined, this code would become

	if (cmdq_pkt)

	else
		writel(value, comp->regs + offset);

> +}
> +
> +void mtk_ddp_write_relaxed(struct cmdq_pkt *cmdq_pkt, unsigned int value,
> +			   struct mtk_ddp_comp *comp,
> +			   unsigned int offset)
> +{
> +	if (cmdq_pkt)
> +#ifdef CONFIG_MTK_CMDQ
> +		cmdq_pkt_write(cmdq_pkt, comp->subsys,
> +			       comp->regs_pa + offset, value);
> +#endif
> +	else
> +		writel_relaxed(value, comp->regs + offset);
> +}
> +
> +void mtk_ddp_write_mask(struct cmdq_pkt *cmdq_pkt,
> +			unsigned int value,
> +			struct mtk_ddp_comp *comp,
> +			unsigned int offset,
> +			unsigned int mask)
> +{
> +	if (cmdq_pkt) {
> +#ifdef CONFIG_MTK_CMDQ
> +		cmdq_pkt_write_mask(cmdq_pkt, comp->subsys,
> +				    comp->regs_pa + offset, value, mask);
> +#endif
> +	} else {
> +		u32 tmp = readl(comp->regs + offset);
> +
> +		tmp = (tmp & ~mask) | (value & mask);
> +		writel(tmp, comp->regs + offset);
> +	}
> +}
> +

[snip]

>  
>  static void mtk_gamma_start(struct mtk_ddp_comp *comp)
> @@ -324,6 +371,9 @@ int mtk_ddp_comp_init(struct device *dev, struct device_node *node,
>  		      const struct mtk_ddp_comp_funcs *funcs)
>  {
>  	struct platform_device *comp_pdev;
> +	struct resource res;
> +	struct cmdq_client_reg *cmdq_reg;

I think you could simply defined as below, so you need not to allocate
and free.

struct cmdq_client_reg cmdq_reg;

Regards,
CK

> +	int ret = 0;
>  
>  	if (comp_id < 0 || comp_id >= DDP_COMPONENT_ID_MAX)
>  		return -EINVAL;
> @@ -358,6 +408,34 @@ int mtk_ddp_comp_init(struct device *dev, struct device_node *node,
>  	}
>  	comp->dev = &comp_pdev->dev;
>  
> +#ifdef CONFIG_MTK_CMDQ
> +	if (of_address_to_resource(node, 0, &res) != 0) {
> +		dev_err(dev, "Missing reg in %s node\n",
> +			node->full_name);
> +		return -EINVAL;
> +	}
> +	comp->regs_pa = res.start;
> +
> +	comp_pdev = of_find_device_by_node(node);
> +	if (!comp_pdev) {
> +		dev_warn(dev, "Waiting for component device %s\n",
> +			 node->full_name);
> +		return -EPROBE_DEFER;
> +	}
> +
> +	cmdq_reg = kzalloc(sizeof(*cmdq_reg), GFP_KERNEL);
> +	if (!cmdq_reg)
> +		return -EINVAL;
> +
> +	ret = cmdq_dev_get_client_reg(&comp_pdev->dev, cmdq_reg, 0);
> +	if (ret != 0)
> +		dev_dbg(&comp_pdev->dev,
> +			"get mediatek,gce-client-reg fail!\n");
> +	else
> +		comp->subsys = cmdq_reg->subsys;
> +
> +	kfree(cmdq_reg);
> +#endif
>  	return 0;
>  }
>  


_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  reply	other threads:[~2019-12-05  4:51 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-04  9:44 [PATCH v3 0/6] drm/mediatek: fix cursor issue and apply CMDQ in MTK DRM Bibby Hsieh
2019-12-04  9:44 ` Bibby Hsieh
2019-12-04  9:44 ` Bibby Hsieh
2019-12-04  9:44 ` Bibby Hsieh
2019-12-04  9:44 ` [PATCH v3 1/6] drm/mediatek: use DRM core's atomic commit helper Bibby Hsieh
2019-12-04  9:44   ` Bibby Hsieh
2019-12-04  9:44   ` Bibby Hsieh
2019-12-04  9:44   ` Bibby Hsieh
2019-12-04  9:44 ` [PATCH v3 2/6] drm/mediatek: handle events when enabling/disabling crtc Bibby Hsieh
2019-12-04  9:44   ` Bibby Hsieh
2019-12-04  9:44   ` Bibby Hsieh
2019-12-04  9:44   ` Bibby Hsieh
2019-12-04  9:44 ` [PATCH v3 3/6] drm/mediatek: update cursors by using async atomic update Bibby Hsieh
2019-12-04  9:44   ` Bibby Hsieh
2019-12-04  9:44   ` Bibby Hsieh
2019-12-04  9:44   ` Bibby Hsieh
2019-12-05  2:13   ` CK Hu
2019-12-05  2:13     ` CK Hu
2019-12-05  2:13     ` CK Hu
2019-12-05  2:13     ` CK Hu
2019-12-04  9:44 ` [PATCH v3 4/6] drm/mediatek: remove unused external function Bibby Hsieh
2019-12-04  9:44   ` Bibby Hsieh
2019-12-04  9:44   ` Bibby Hsieh
2019-12-04  9:44   ` Bibby Hsieh
2019-12-04  9:44 ` [PATCH v3 5/6] drm/mediatek: support CMDQ interface in ddp component Bibby Hsieh
2019-12-04  9:44   ` Bibby Hsieh
2019-12-04  9:44   ` Bibby Hsieh
2019-12-04  9:44   ` Bibby Hsieh
2019-12-05  4:50   ` CK Hu [this message]
2019-12-05  4:50     ` CK Hu
2019-12-05  4:50     ` CK Hu
2019-12-05  4:50     ` CK Hu
2019-12-04  9:44 ` [PATCH v3 6/6] drm/mediatek: apply CMDQ control flow Bibby Hsieh
2019-12-04  9:44   ` Bibby Hsieh
2019-12-04  9:44   ` Bibby Hsieh
2019-12-04  9:44   ` Bibby Hsieh
2019-12-05  5:44   ` CK Hu
2019-12-05  5:44     ` CK Hu
2019-12-05  5:44     ` CK Hu
2019-12-05  5:44     ` CK Hu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1575521448.24783.11.camel@mtksdaap41 \
    --to=ck.hu@mediatek.com \
    --cc=airlied@linux.ie \
    --cc=bibby.hsieh@mediatek.com \
    --cc=daniel.vetter@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=drinkcat@chromium.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=matthias.bgg@gmail.com \
    --cc=p.zabel@pengutronix.de \
    --cc=srv_heupstream@mediatek.com \
    --cc=tfiga@chromium.org \
    --cc=thierry.reding@gmail.com \
    --cc=yongqiang.niu@mediatek.com \
    --cc=yt.shen@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.