All of lore.kernel.org
 help / color / mirror / Atom feed
From: Claudiu Beznea <claudiu.beznea@microchip.com>
To: <sam@ravnborg.org>, <bbrezillon@kernel.org>, <airlied@linux.ie>,
	<daniel@ffwll.ch>, <nicolas.ferre@microchip.com>,
	<alexandre.belloni@bootlin.com>,
	<ludovic.desroches@microchip.com>, <lee.jones@linaro.org>
Cc: <dri-devel@lists.freedesktop.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>,
	Claudiu Beznea <claudiu.beznea@microchip.com>,
	Sandeep Sheriker Mallikarjun 
	<sandeepsheriker.mallikarjun@microchip.com>
Subject: [PATCH 5/5] Revert "drm: atmel-hlcdc: enable sys_clk during initalization."
Date: Tue, 10 Dec 2019 15:24:47 +0200	[thread overview]
Message-ID: <1575984287-26787-6-git-send-email-claudiu.beznea@microchip.com> (raw)
In-Reply-To: <1575984287-26787-1-git-send-email-claudiu.beznea@microchip.com>

This reverts commit d2c755e66617620b729041c625a6396c81d1231c.
("drm: atmel-hlcdc: enable sys_clk during initalization."). With
commit "drm: atmel-hlcdc: enable clock before configuring timing engine"
there is no need for this patch. Code is also simpler.

Cc: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
 drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c | 19 +------------------
 1 file changed, 1 insertion(+), 18 deletions(-)

diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
index 8dc917a1270b..112aa5066cee 100644
--- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
+++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
@@ -721,18 +721,10 @@ static int atmel_hlcdc_dc_load(struct drm_device *dev)
 	dc->hlcdc = dev_get_drvdata(dev->dev->parent);
 	dev->dev_private = dc;
 
-	if (dc->desc->fixed_clksrc) {
-		ret = clk_prepare_enable(dc->hlcdc->sys_clk);
-		if (ret) {
-			dev_err(dev->dev, "failed to enable sys_clk\n");
-			goto err_destroy_wq;
-		}
-	}
-
 	ret = clk_prepare_enable(dc->hlcdc->periph_clk);
 	if (ret) {
 		dev_err(dev->dev, "failed to enable periph_clk\n");
-		goto err_sys_clk_disable;
+		goto err_destroy_wq;
 	}
 
 	pm_runtime_enable(dev->dev);
@@ -768,9 +760,6 @@ static int atmel_hlcdc_dc_load(struct drm_device *dev)
 err_periph_clk_disable:
 	pm_runtime_disable(dev->dev);
 	clk_disable_unprepare(dc->hlcdc->periph_clk);
-err_sys_clk_disable:
-	if (dc->desc->fixed_clksrc)
-		clk_disable_unprepare(dc->hlcdc->sys_clk);
 
 err_destroy_wq:
 	destroy_workqueue(dc->wq);
@@ -795,8 +784,6 @@ static void atmel_hlcdc_dc_unload(struct drm_device *dev)
 
 	pm_runtime_disable(dev->dev);
 	clk_disable_unprepare(dc->hlcdc->periph_clk);
-	if (dc->desc->fixed_clksrc)
-		clk_disable_unprepare(dc->hlcdc->sys_clk);
 	destroy_workqueue(dc->wq);
 }
 
@@ -910,8 +897,6 @@ static int atmel_hlcdc_dc_drm_suspend(struct device *dev)
 	regmap_read(regmap, ATMEL_HLCDC_IMR, &dc->suspend.imr);
 	regmap_write(regmap, ATMEL_HLCDC_IDR, dc->suspend.imr);
 	clk_disable_unprepare(dc->hlcdc->periph_clk);
-	if (dc->desc->fixed_clksrc)
-		clk_disable_unprepare(dc->hlcdc->sys_clk);
 
 	return 0;
 }
@@ -921,8 +906,6 @@ static int atmel_hlcdc_dc_drm_resume(struct device *dev)
 	struct drm_device *drm_dev = dev_get_drvdata(dev);
 	struct atmel_hlcdc_dc *dc = drm_dev->dev_private;
 
-	if (dc->desc->fixed_clksrc)
-		clk_prepare_enable(dc->hlcdc->sys_clk);
 	clk_prepare_enable(dc->hlcdc->periph_clk);
 	regmap_write(dc->hlcdc->regmap, ATMEL_HLCDC_IER, dc->suspend.imr);
 
-- 
2.7.4


WARNING: multiple messages have this Message-ID (diff)
From: Claudiu Beznea <claudiu.beznea@microchip.com>
To: <sam@ravnborg.org>, <bbrezillon@kernel.org>, <airlied@linux.ie>,
	<daniel@ffwll.ch>, <nicolas.ferre@microchip.com>,
	<alexandre.belloni@bootlin.com>,
	<ludovic.desroches@microchip.com>, <lee.jones@linaro.org>
Cc: Sandeep Sheriker Mallikarjun
	<sandeepsheriker.mallikarjun@microchip.com>,
	Claudiu Beznea <claudiu.beznea@microchip.com>,
	linux-arm-kernel@lists.infradead.org,
	dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org
Subject: [PATCH 5/5] Revert "drm: atmel-hlcdc: enable sys_clk during initalization."
Date: Tue, 10 Dec 2019 15:24:47 +0200	[thread overview]
Message-ID: <1575984287-26787-6-git-send-email-claudiu.beznea@microchip.com> (raw)
In-Reply-To: <1575984287-26787-1-git-send-email-claudiu.beznea@microchip.com>

This reverts commit d2c755e66617620b729041c625a6396c81d1231c.
("drm: atmel-hlcdc: enable sys_clk during initalization."). With
commit "drm: atmel-hlcdc: enable clock before configuring timing engine"
there is no need for this patch. Code is also simpler.

Cc: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
 drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c | 19 +------------------
 1 file changed, 1 insertion(+), 18 deletions(-)

diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
index 8dc917a1270b..112aa5066cee 100644
--- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
+++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
@@ -721,18 +721,10 @@ static int atmel_hlcdc_dc_load(struct drm_device *dev)
 	dc->hlcdc = dev_get_drvdata(dev->dev->parent);
 	dev->dev_private = dc;
 
-	if (dc->desc->fixed_clksrc) {
-		ret = clk_prepare_enable(dc->hlcdc->sys_clk);
-		if (ret) {
-			dev_err(dev->dev, "failed to enable sys_clk\n");
-			goto err_destroy_wq;
-		}
-	}
-
 	ret = clk_prepare_enable(dc->hlcdc->periph_clk);
 	if (ret) {
 		dev_err(dev->dev, "failed to enable periph_clk\n");
-		goto err_sys_clk_disable;
+		goto err_destroy_wq;
 	}
 
 	pm_runtime_enable(dev->dev);
@@ -768,9 +760,6 @@ static int atmel_hlcdc_dc_load(struct drm_device *dev)
 err_periph_clk_disable:
 	pm_runtime_disable(dev->dev);
 	clk_disable_unprepare(dc->hlcdc->periph_clk);
-err_sys_clk_disable:
-	if (dc->desc->fixed_clksrc)
-		clk_disable_unprepare(dc->hlcdc->sys_clk);
 
 err_destroy_wq:
 	destroy_workqueue(dc->wq);
@@ -795,8 +784,6 @@ static void atmel_hlcdc_dc_unload(struct drm_device *dev)
 
 	pm_runtime_disable(dev->dev);
 	clk_disable_unprepare(dc->hlcdc->periph_clk);
-	if (dc->desc->fixed_clksrc)
-		clk_disable_unprepare(dc->hlcdc->sys_clk);
 	destroy_workqueue(dc->wq);
 }
 
@@ -910,8 +897,6 @@ static int atmel_hlcdc_dc_drm_suspend(struct device *dev)
 	regmap_read(regmap, ATMEL_HLCDC_IMR, &dc->suspend.imr);
 	regmap_write(regmap, ATMEL_HLCDC_IDR, dc->suspend.imr);
 	clk_disable_unprepare(dc->hlcdc->periph_clk);
-	if (dc->desc->fixed_clksrc)
-		clk_disable_unprepare(dc->hlcdc->sys_clk);
 
 	return 0;
 }
@@ -921,8 +906,6 @@ static int atmel_hlcdc_dc_drm_resume(struct device *dev)
 	struct drm_device *drm_dev = dev_get_drvdata(dev);
 	struct atmel_hlcdc_dc *dc = drm_dev->dev_private;
 
-	if (dc->desc->fixed_clksrc)
-		clk_prepare_enable(dc->hlcdc->sys_clk);
 	clk_prepare_enable(dc->hlcdc->periph_clk);
 	regmap_write(dc->hlcdc->regmap, ATMEL_HLCDC_IER, dc->suspend.imr);
 
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Claudiu Beznea <claudiu.beznea@microchip.com>
To: <sam@ravnborg.org>, <bbrezillon@kernel.org>, <airlied@linux.ie>,
	<daniel@ffwll.ch>, <nicolas.ferre@microchip.com>,
	<alexandre.belloni@bootlin.com>,
	<ludovic.desroches@microchip.com>, <lee.jones@linaro.org>
Cc: Sandeep Sheriker Mallikarjun
	<sandeepsheriker.mallikarjun@microchip.com>,
	Claudiu Beznea <claudiu.beznea@microchip.com>,
	linux-arm-kernel@lists.infradead.org,
	dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org
Subject: [PATCH 5/5] Revert "drm: atmel-hlcdc: enable sys_clk during initalization."
Date: Tue, 10 Dec 2019 15:24:47 +0200	[thread overview]
Message-ID: <1575984287-26787-6-git-send-email-claudiu.beznea@microchip.com> (raw)
In-Reply-To: <1575984287-26787-1-git-send-email-claudiu.beznea@microchip.com>

This reverts commit d2c755e66617620b729041c625a6396c81d1231c.
("drm: atmel-hlcdc: enable sys_clk during initalization."). With
commit "drm: atmel-hlcdc: enable clock before configuring timing engine"
there is no need for this patch. Code is also simpler.

Cc: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
 drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c | 19 +------------------
 1 file changed, 1 insertion(+), 18 deletions(-)

diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
index 8dc917a1270b..112aa5066cee 100644
--- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
+++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
@@ -721,18 +721,10 @@ static int atmel_hlcdc_dc_load(struct drm_device *dev)
 	dc->hlcdc = dev_get_drvdata(dev->dev->parent);
 	dev->dev_private = dc;
 
-	if (dc->desc->fixed_clksrc) {
-		ret = clk_prepare_enable(dc->hlcdc->sys_clk);
-		if (ret) {
-			dev_err(dev->dev, "failed to enable sys_clk\n");
-			goto err_destroy_wq;
-		}
-	}
-
 	ret = clk_prepare_enable(dc->hlcdc->periph_clk);
 	if (ret) {
 		dev_err(dev->dev, "failed to enable periph_clk\n");
-		goto err_sys_clk_disable;
+		goto err_destroy_wq;
 	}
 
 	pm_runtime_enable(dev->dev);
@@ -768,9 +760,6 @@ static int atmel_hlcdc_dc_load(struct drm_device *dev)
 err_periph_clk_disable:
 	pm_runtime_disable(dev->dev);
 	clk_disable_unprepare(dc->hlcdc->periph_clk);
-err_sys_clk_disable:
-	if (dc->desc->fixed_clksrc)
-		clk_disable_unprepare(dc->hlcdc->sys_clk);
 
 err_destroy_wq:
 	destroy_workqueue(dc->wq);
@@ -795,8 +784,6 @@ static void atmel_hlcdc_dc_unload(struct drm_device *dev)
 
 	pm_runtime_disable(dev->dev);
 	clk_disable_unprepare(dc->hlcdc->periph_clk);
-	if (dc->desc->fixed_clksrc)
-		clk_disable_unprepare(dc->hlcdc->sys_clk);
 	destroy_workqueue(dc->wq);
 }
 
@@ -910,8 +897,6 @@ static int atmel_hlcdc_dc_drm_suspend(struct device *dev)
 	regmap_read(regmap, ATMEL_HLCDC_IMR, &dc->suspend.imr);
 	regmap_write(regmap, ATMEL_HLCDC_IDR, dc->suspend.imr);
 	clk_disable_unprepare(dc->hlcdc->periph_clk);
-	if (dc->desc->fixed_clksrc)
-		clk_disable_unprepare(dc->hlcdc->sys_clk);
 
 	return 0;
 }
@@ -921,8 +906,6 @@ static int atmel_hlcdc_dc_drm_resume(struct device *dev)
 	struct drm_device *drm_dev = dev_get_drvdata(dev);
 	struct atmel_hlcdc_dc *dc = drm_dev->dev_private;
 
-	if (dc->desc->fixed_clksrc)
-		clk_prepare_enable(dc->hlcdc->sys_clk);
 	clk_prepare_enable(dc->hlcdc->periph_clk);
 	regmap_write(dc->hlcdc->regmap, ATMEL_HLCDC_IER, dc->suspend.imr);
 
-- 
2.7.4

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  parent reply	other threads:[~2019-12-10 13:25 UTC|newest]

Thread overview: 54+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-10 13:24 [PATCH 0/5] fixes for atmel-hlcdc Claudiu Beznea
2019-12-10 13:24 ` Claudiu Beznea
2019-12-10 13:24 ` Claudiu Beznea
2019-12-10 13:24 ` [PATCH 1/5] drm: atmel-hlcdc: use double rate for pixel clock only if supported Claudiu Beznea
2019-12-10 13:24   ` Claudiu Beznea
2019-12-10 13:24   ` Claudiu Beznea
2019-12-10 13:24 ` [PATCH 2/5] drm: atmel-hlcdc: enable clock before configuring timing engine Claudiu Beznea
2019-12-10 13:24   ` Claudiu Beznea
2019-12-10 13:24   ` Claudiu Beznea
2019-12-10 20:18   ` Sam Ravnborg
2019-12-10 20:18     ` Sam Ravnborg
2019-12-10 20:18     ` Sam Ravnborg
2019-12-10 13:24 ` [PATCH 3/5] mfd: atmel-hlcdc: return in case of error Claudiu Beznea
2019-12-10 13:24   ` Claudiu Beznea
2019-12-10 13:24   ` Claudiu Beznea
2019-12-10 20:37   ` Sam Ravnborg
2019-12-10 20:37     ` Sam Ravnborg
2019-12-10 20:37     ` Sam Ravnborg
2019-12-11 12:07     ` Claudiu.Beznea
2019-12-11 12:07       ` Claudiu.Beznea
2019-12-11 12:07       ` Claudiu.Beznea
2019-12-10 13:24 ` [PATCH 4/5] Revert "drm/atmel-hlcdc: allow selecting a higher pixel-clock than requested" Claudiu Beznea
2019-12-10 13:24   ` Claudiu Beznea
2019-12-10 13:24   ` Claudiu Beznea
2019-12-10 14:11   ` Peter Rosin
2019-12-10 14:11     ` Peter Rosin
2019-12-10 14:11     ` Peter Rosin
2019-12-10 14:59     ` Claudiu.Beznea
2019-12-10 14:59       ` Claudiu.Beznea
2019-12-10 14:59       ` Claudiu.Beznea
2019-12-10 17:22       ` Peter Rosin
2019-12-10 17:22         ` Peter Rosin
2019-12-10 17:22         ` Peter Rosin
2019-12-11 11:45         ` Claudiu.Beznea
2019-12-11 11:45           ` Claudiu.Beznea
2019-12-11 11:45           ` Claudiu.Beznea
2019-12-11 13:28           ` Peter Rosin
2019-12-11 13:28             ` Peter Rosin
2019-12-11 13:28             ` Peter Rosin
2019-12-13  9:28             ` Claudiu.Beznea
2019-12-13  9:28               ` Claudiu.Beznea
2019-12-13  9:28               ` Claudiu.Beznea
2019-12-13  9:30               ` Peter Rosin
2019-12-13  9:30                 ` Peter Rosin
2019-12-13  9:30                 ` Peter Rosin
2019-12-10 13:24 ` Claudiu Beznea [this message]
2019-12-10 13:24   ` [PATCH 5/5] Revert "drm: atmel-hlcdc: enable sys_clk during initalization." Claudiu Beznea
2019-12-10 13:24   ` Claudiu Beznea
2019-12-10 20:34   ` Sam Ravnborg
2019-12-10 20:34     ` Sam Ravnborg
2019-12-10 20:34     ` Sam Ravnborg
2019-12-11 11:55     ` Claudiu.Beznea
2019-12-11 11:55       ` Claudiu.Beznea
2019-12-11 11:55       ` Claudiu.Beznea

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1575984287-26787-6-git-send-email-claudiu.beznea@microchip.com \
    --to=claudiu.beznea@microchip.com \
    --cc=airlied@linux.ie \
    --cc=alexandre.belloni@bootlin.com \
    --cc=bbrezillon@kernel.org \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=lee.jones@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=ludovic.desroches@microchip.com \
    --cc=nicolas.ferre@microchip.com \
    --cc=sam@ravnborg.org \
    --cc=sandeepsheriker.mallikarjun@microchip.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.