From: Srinivas Neeli <srinivas.neeli@xilinx.com> To: linux@roeck-us.net, michal.simek@xilinx.com, shubhrajyoti.datta@xilinx.com, sgoud@xilinx.com Cc: wim@linux-watchdog.org, linux-watchdog@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, git@xilinx.com Subject: [PATCH 6/9] dt-bindings: watchdog: xilinx: Add binding for Versal watchdog Date: Thu, 16 Jan 2020 18:56:54 +0530 [thread overview] Message-ID: <1579181217-31127-7-git-send-email-srinivas.neeli@xilinx.com> (raw) In-Reply-To: <1579181217-31127-1-git-send-email-srinivas.neeli@xilinx.com> From: Srinivas Goud <srinivas.goud@xilinx.com> Updated watchdog binding for Versal window watchdog. Added timeout-sec DT property. timeout-sec is optional property for Versal window watchdog. Signed-off-by: Srinivas Goud <srinivas.goud@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> --- .../devicetree/bindings/watchdog/of-xilinx-wdt.txt | 21 ++++++++++++++++++--- 1 file changed, 18 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/watchdog/of-xilinx-wdt.txt b/Documentation/devicetree/bindings/watchdog/of-xilinx-wdt.txt index c6ae9c9d5e3e..10d68003158d 100644 --- a/Documentation/devicetree/bindings/watchdog/of-xilinx-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/of-xilinx-wdt.txt @@ -1,21 +1,28 @@ -Xilinx AXI/PLB soft-core watchdog Device Tree Bindings ---------------------------------------------------------- +Xilinx AXI/PLB soft-core watchdog and window watchdog Device Tree Bindings +-------------------------------------------------------------------------- Required properties: - compatible : Should be "xlnx,xps-timebase-wdt-1.00.a" or - "xlnx,xps-timebase-wdt-1.01.a". + "xlnx,xps-timebase-wdt-1.01.a" or + "xlnx,versal-wwdt-1.0". - reg : Physical base address and size Optional properties: - clocks : Input clock specifier. Refer to common clock bindings. - clock-frequency : Frequency of clock in Hz + +Optional properties for AXI/PLB soft-core watchdog: - xlnx,wdt-enable-once : 0 - Watchdog can be restarted 1 - Watchdog can be enabled just once - xlnx,wdt-interval : Watchdog timeout interval in 2^<val> clock cycles, <val> is integer from 8 to 31. +Optional properties for window watchdog: +- timeout-sec : Watchdog timeout value (in seconds). + Example: +Xilinx AXI/PLB soft-core watchdog: axi-timebase-wdt@40100000 { clock-frequency = <50000000>; compatible = "xlnx,xps-timebase-wdt-1.00.a"; @@ -24,3 +31,11 @@ axi-timebase-wdt@40100000 { xlnx,wdt-enable-once = <0x0>; xlnx,wdt-interval = <0x1b>; } ; + +Xilinx Versal window watchdog: +watchdog@fd4d0000 { + compatible = "xlnx,versal-wwdt-1.0"; + reg = <0x0 0xfd4d0000 0x0 0x10000>; + clocks = <&clk25>; + timeout-sec = <10>; +} ; -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Srinivas Neeli <srinivas.neeli@xilinx.com> To: linux@roeck-us.net, michal.simek@xilinx.com, shubhrajyoti.datta@xilinx.com, sgoud@xilinx.com Cc: git@xilinx.com, wim@linux-watchdog.org, linux-watchdog@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Subject: [PATCH 6/9] dt-bindings: watchdog: xilinx: Add binding for Versal watchdog Date: Thu, 16 Jan 2020 18:56:54 +0530 [thread overview] Message-ID: <1579181217-31127-7-git-send-email-srinivas.neeli@xilinx.com> (raw) In-Reply-To: <1579181217-31127-1-git-send-email-srinivas.neeli@xilinx.com> From: Srinivas Goud <srinivas.goud@xilinx.com> Updated watchdog binding for Versal window watchdog. Added timeout-sec DT property. timeout-sec is optional property for Versal window watchdog. Signed-off-by: Srinivas Goud <srinivas.goud@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> --- .../devicetree/bindings/watchdog/of-xilinx-wdt.txt | 21 ++++++++++++++++++--- 1 file changed, 18 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/watchdog/of-xilinx-wdt.txt b/Documentation/devicetree/bindings/watchdog/of-xilinx-wdt.txt index c6ae9c9d5e3e..10d68003158d 100644 --- a/Documentation/devicetree/bindings/watchdog/of-xilinx-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/of-xilinx-wdt.txt @@ -1,21 +1,28 @@ -Xilinx AXI/PLB soft-core watchdog Device Tree Bindings ---------------------------------------------------------- +Xilinx AXI/PLB soft-core watchdog and window watchdog Device Tree Bindings +-------------------------------------------------------------------------- Required properties: - compatible : Should be "xlnx,xps-timebase-wdt-1.00.a" or - "xlnx,xps-timebase-wdt-1.01.a". + "xlnx,xps-timebase-wdt-1.01.a" or + "xlnx,versal-wwdt-1.0". - reg : Physical base address and size Optional properties: - clocks : Input clock specifier. Refer to common clock bindings. - clock-frequency : Frequency of clock in Hz + +Optional properties for AXI/PLB soft-core watchdog: - xlnx,wdt-enable-once : 0 - Watchdog can be restarted 1 - Watchdog can be enabled just once - xlnx,wdt-interval : Watchdog timeout interval in 2^<val> clock cycles, <val> is integer from 8 to 31. +Optional properties for window watchdog: +- timeout-sec : Watchdog timeout value (in seconds). + Example: +Xilinx AXI/PLB soft-core watchdog: axi-timebase-wdt@40100000 { clock-frequency = <50000000>; compatible = "xlnx,xps-timebase-wdt-1.00.a"; @@ -24,3 +31,11 @@ axi-timebase-wdt@40100000 { xlnx,wdt-enable-once = <0x0>; xlnx,wdt-interval = <0x1b>; } ; + +Xilinx Versal window watchdog: +watchdog@fd4d0000 { + compatible = "xlnx,versal-wwdt-1.0"; + reg = <0x0 0xfd4d0000 0x0 0x10000>; + clocks = <&clk25>; + timeout-sec = <10>; +} ; -- 2.7.4 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-01-16 13:27 UTC|newest] Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-01-16 13:26 [PATCH 0/9] watchdog: of_xilinx_wdt: Update on watchdog driver Srinivas Neeli 2020-01-16 13:26 ` Srinivas Neeli 2020-01-16 13:26 ` [PATCH 1/9] watchdog: of_xilinx_wdt: Add comment to spinlock Srinivas Neeli 2020-01-16 13:26 ` Srinivas Neeli 2020-01-16 15:48 ` Guenter Roeck 2020-01-16 15:48 ` Guenter Roeck 2020-01-16 13:26 ` [PATCH 2/9] watchdog: of_xilinx_wdt: Used BIT macro Srinivas Neeli 2020-01-16 13:26 ` Srinivas Neeli 2020-01-16 15:04 ` Guenter Roeck 2020-01-16 15:04 ` Guenter Roeck 2020-01-16 13:26 ` [PATCH 3/9] watchdog: of_xilinx_wdt: Used dev_dbg() Srinivas Neeli 2020-01-16 13:26 ` Srinivas Neeli 2020-01-16 13:26 ` [PATCH 4/9] watchdog: of_xilinx_wdt: Initialize watchdog via data structure Srinivas Neeli 2020-01-16 13:26 ` Srinivas Neeli 2020-01-16 13:26 ` [PATCH 5/9] watchdog: of_xilinx_wdt: Introduce wdttype enum for identification Srinivas Neeli 2020-01-16 13:26 ` Srinivas Neeli 2020-01-16 13:26 ` Srinivas Neeli [this message] 2020-01-16 13:26 ` [PATCH 6/9] dt-bindings: watchdog: xilinx: Add binding for Versal watchdog Srinivas Neeli 2020-01-16 13:26 ` [PATCH 7/9] watchdog: of_xilinx_wdt: Add Versal support Srinivas Neeli 2020-01-16 13:26 ` Srinivas Neeli 2020-01-16 15:07 ` Guenter Roeck 2020-01-16 15:07 ` Guenter Roeck 2020-01-16 13:26 ` [PATCH 8/9] watchdog: of_xilinx_wdt: Wire setting up timeout via module parameter/DT Srinivas Neeli 2020-01-16 13:26 ` Srinivas Neeli 2020-01-16 13:26 ` [PATCH 9/9] watchdog: of_xilinx_wdt: Skip printing pointer value Srinivas Neeli 2020-01-16 13:26 ` Srinivas Neeli 2021-03-15 10:46 [PATCH 0/9] watchdog: of_xilinx_wdt: Update on xilinx watchdog driver Srinivas Neeli 2021-03-15 10:46 ` [PATCH 6/9] dt-bindings: watchdog: xilinx: Add binding for Versal watchdog Srinivas Neeli 2021-03-15 10:46 ` Srinivas Neeli
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1579181217-31127-7-git-send-email-srinivas.neeli@xilinx.com \ --to=srinivas.neeli@xilinx.com \ --cc=git@xilinx.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-watchdog@vger.kernel.org \ --cc=linux@roeck-us.net \ --cc=michal.simek@xilinx.com \ --cc=sgoud@xilinx.com \ --cc=shubhrajyoti.datta@xilinx.com \ --cc=wim@linux-watchdog.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.