From: Anson Huang <Anson.Huang@nxp.com> To: robh+dt@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de, kernel@pengutronix.de, festevam@gmail.com, daniel.baluta@nxp.com, leonard.crestez@nxp.com, peng.fan@nxp.com, aford173@gmail.com, jun.li@nxp.com, shengjiu.wang@nxp.com, horia.geanta@nxp.com, aisheng.dong@nxp.com, fugang.duan@nxp.com, agx@sigxcpu.org, l.stach@pengutronix.de, andrew.smirnov@gmail.com, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Cc: Linux-imx@nxp.com Subject: [PATCH 2/4] arm64: dts: imx8m: change ocotp node name on i.MX8M SoCs Date: Thu, 28 May 2020 11:12:48 +0800 [thread overview] Message-ID: <1590635570-8541-3-git-send-email-Anson.Huang@nxp.com> (raw) In-Reply-To: <1590635570-8541-1-git-send-email-Anson.Huang@nxp.com> Change OCOTP node name from ocotp-ctrl to efuse to be compliant with yaml schema, it requires the nodename to be one of "eeprom|efuse|nvram". Signed-off-by: Anson Huang <Anson.Huang@nxp.com> --- arch/arm64/boot/dts/freescale/imx8mm.dtsi | 2 +- arch/arm64/boot/dts/freescale/imx8mn.dtsi | 2 +- arch/arm64/boot/dts/freescale/imx8mp.dtsi | 2 +- arch/arm64/boot/dts/freescale/imx8mq.dtsi | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi index aaf6e71..740cc62 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi @@ -467,7 +467,7 @@ reg = <0x30340000 0x10000>; }; - ocotp: ocotp-ctrl@30350000 { + ocotp: efuse@30350000 { compatible = "fsl,imx8mm-ocotp", "syscon"; reg = <0x30350000 0x10000>; clocks = <&clk IMX8MM_CLK_OCOTP_ROOT>; diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi index 9a4b65a..0625cc8 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi @@ -374,7 +374,7 @@ reg = <0x30340000 0x10000>; }; - ocotp: ocotp-ctrl@30350000 { + ocotp: efuse@30350000 { compatible = "fsl,imx8mn-ocotp", "fsl,imx8mm-ocotp", "syscon"; reg = <0x30350000 0x10000>; clocks = <&clk IMX8MN_CLK_OCOTP_ROOT>; diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index 23e9a4c..c248e7f 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -340,7 +340,7 @@ reg = <0x30340000 0x10000>; }; - ocotp: ocotp-ctrl@30350000 { + ocotp: efuse@30350000 { compatible = "fsl,imx8mp-ocotp", "syscon"; reg = <0x30350000 0x10000>; clocks = <&clk IMX8MP_CLK_OCOTP_ROOT>; diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index 978f812..b156cd5 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -539,7 +539,7 @@ }; }; - ocotp: ocotp-ctrl@30350000 { + ocotp: efuse@30350000 { compatible = "fsl,imx8mq-ocotp", "syscon"; reg = <0x30350000 0x10000>; clocks = <&clk IMX8MQ_CLK_OCOTP_ROOT>; -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Anson Huang <Anson.Huang@nxp.com> To: robh+dt@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de, kernel@pengutronix.de, festevam@gmail.com, daniel.baluta@nxp.com, leonard.crestez@nxp.com, peng.fan@nxp.com, aford173@gmail.com, jun.li@nxp.com, shengjiu.wang@nxp.com, horia.geanta@nxp.com, aisheng.dong@nxp.com, fugang.duan@nxp.com, agx@sigxcpu.org, l.stach@pengutronix.de, andrew.smirnov@gmail.com, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Cc: Linux-imx@nxp.com Subject: [PATCH 2/4] arm64: dts: imx8m: change ocotp node name on i.MX8M SoCs Date: Thu, 28 May 2020 11:12:48 +0800 [thread overview] Message-ID: <1590635570-8541-3-git-send-email-Anson.Huang@nxp.com> (raw) In-Reply-To: <1590635570-8541-1-git-send-email-Anson.Huang@nxp.com> Change OCOTP node name from ocotp-ctrl to efuse to be compliant with yaml schema, it requires the nodename to be one of "eeprom|efuse|nvram". Signed-off-by: Anson Huang <Anson.Huang@nxp.com> --- arch/arm64/boot/dts/freescale/imx8mm.dtsi | 2 +- arch/arm64/boot/dts/freescale/imx8mn.dtsi | 2 +- arch/arm64/boot/dts/freescale/imx8mp.dtsi | 2 +- arch/arm64/boot/dts/freescale/imx8mq.dtsi | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi index aaf6e71..740cc62 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi @@ -467,7 +467,7 @@ reg = <0x30340000 0x10000>; }; - ocotp: ocotp-ctrl@30350000 { + ocotp: efuse@30350000 { compatible = "fsl,imx8mm-ocotp", "syscon"; reg = <0x30350000 0x10000>; clocks = <&clk IMX8MM_CLK_OCOTP_ROOT>; diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi index 9a4b65a..0625cc8 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi @@ -374,7 +374,7 @@ reg = <0x30340000 0x10000>; }; - ocotp: ocotp-ctrl@30350000 { + ocotp: efuse@30350000 { compatible = "fsl,imx8mn-ocotp", "fsl,imx8mm-ocotp", "syscon"; reg = <0x30350000 0x10000>; clocks = <&clk IMX8MN_CLK_OCOTP_ROOT>; diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index 23e9a4c..c248e7f 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -340,7 +340,7 @@ reg = <0x30340000 0x10000>; }; - ocotp: ocotp-ctrl@30350000 { + ocotp: efuse@30350000 { compatible = "fsl,imx8mp-ocotp", "syscon"; reg = <0x30350000 0x10000>; clocks = <&clk IMX8MP_CLK_OCOTP_ROOT>; diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index 978f812..b156cd5 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -539,7 +539,7 @@ }; }; - ocotp: ocotp-ctrl@30350000 { + ocotp: efuse@30350000 { compatible = "fsl,imx8mq-ocotp", "syscon"; reg = <0x30350000 0x10000>; clocks = <&clk IMX8MQ_CLK_OCOTP_ROOT>; -- 2.7.4 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-05-28 3:23 UTC|newest] Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-05-28 3:12 [PATCH 0/4] Change i.MX/MXS SoCs ocotp/iim node name to efuse Anson Huang 2020-05-28 3:12 ` Anson Huang 2020-05-28 3:12 ` [PATCH 1/4] ARM: dts: imx: change ocotp node name on i.MX6/7 SoCs Anson Huang 2020-05-28 3:12 ` Anson Huang 2020-05-28 3:12 ` Anson Huang [this message] 2020-05-28 3:12 ` [PATCH 2/4] arm64: dts: imx8m: change ocotp node name on i.MX8M SoCs Anson Huang 2020-05-28 3:12 ` [PATCH 3/4] ARM: dts: imx: change ocotp node name on MXS SoCs Anson Huang 2020-05-28 3:12 ` Anson Huang 2020-05-28 3:12 ` [PATCH 4/4] ARM: dts: imx: change iim node name on i.MX SoCs Anson Huang 2020-05-28 3:12 ` Anson Huang 2020-05-28 10:23 ` [PATCH 0/4] Change i.MX/MXS SoCs ocotp/iim node name to efuse Andy Duan 2020-05-28 10:23 ` Andy Duan 2020-06-23 3:01 ` Shawn Guo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1590635570-8541-3-git-send-email-Anson.Huang@nxp.com \ --to=anson.huang@nxp.com \ --cc=Linux-imx@nxp.com \ --cc=aford173@gmail.com \ --cc=agx@sigxcpu.org \ --cc=aisheng.dong@nxp.com \ --cc=andrew.smirnov@gmail.com \ --cc=daniel.baluta@nxp.com \ --cc=devicetree@vger.kernel.org \ --cc=festevam@gmail.com \ --cc=fugang.duan@nxp.com \ --cc=horia.geanta@nxp.com \ --cc=jun.li@nxp.com \ --cc=kernel@pengutronix.de \ --cc=l.stach@pengutronix.de \ --cc=leonard.crestez@nxp.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=peng.fan@nxp.com \ --cc=robh+dt@kernel.org \ --cc=s.hauer@pengutronix.de \ --cc=shawnguo@kernel.org \ --cc=shengjiu.wang@nxp.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.