From: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>
To: Matthias Brugger <matthias.bgg@gmail.com>,
Philipp Zabel <p.zabel@pengutronix.de>,
David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
CK Hu <ck.hu@mediatek.com>,
Bibby Hsieh <bibby.hsieh@mediatek.com>,
Houlong Wei <houlong.wei@mediatek.com>
Cc: <dri-devel@lists.freedesktop.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-mediatek@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <wsd_upstream@mediatek.com>,
HS Liao <hs.liao@mediatek.com>,
Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>
Subject: [PATCH v3 4/9] soc: mediatek: cmdq: add read_s function
Date: Tue, 7 Jul 2020 23:45:09 +0800 [thread overview]
Message-ID: <1594136714-11650-5-git-send-email-dennis-yc.hsieh@mediatek.com> (raw)
In-Reply-To: <1594136714-11650-1-git-send-email-dennis-yc.hsieh@mediatek.com>
Add read_s function in cmdq helper functions which support read value from
register or dma physical address into gce internal register.
Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>
---
drivers/soc/mediatek/mtk-cmdq-helper.c | 15 +++++++++++++++
include/linux/mailbox/mtk-cmdq-mailbox.h | 1 +
include/linux/soc/mediatek/mtk-cmdq.h | 12 ++++++++++++
3 files changed, 28 insertions(+)
diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
index 550e9e7e3ff2..ed9f5e63c195 100644
--- a/drivers/soc/mediatek/mtk-cmdq-helper.c
+++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
@@ -227,6 +227,21 @@ int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys,
}
EXPORT_SYMBOL(cmdq_pkt_write_mask);
+int cmdq_pkt_read_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx, u16 addr_low,
+ u16 reg_idx)
+{
+ struct cmdq_instruction inst = {};
+
+ inst.op = CMDQ_CODE_READ_S;
+ inst.dst_t = CMDQ_REG_TYPE;
+ inst.sop = high_addr_reg_idx;
+ inst.reg_dst = reg_idx;
+ inst.src_reg = addr_low;
+
+ return cmdq_pkt_append_command(pkt, inst);
+}
+EXPORT_SYMBOL(cmdq_pkt_read_s);
+
int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
u16 addr_low, u16 src_reg_idx)
{
diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h
index 90d1d8e64412..efbd8a9eb2d1 100644
--- a/include/linux/mailbox/mtk-cmdq-mailbox.h
+++ b/include/linux/mailbox/mtk-cmdq-mailbox.h
@@ -60,6 +60,7 @@ enum cmdq_code {
CMDQ_CODE_JUMP = 0x10,
CMDQ_CODE_WFE = 0x20,
CMDQ_CODE_EOC = 0x40,
+ CMDQ_CODE_READ_S = 0x80,
CMDQ_CODE_WRITE_S = 0x90,
CMDQ_CODE_WRITE_S_MASK = 0x91,
CMDQ_CODE_LOGIC = 0xa0,
diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
index 53230341bf94..cd7ec714344e 100644
--- a/include/linux/soc/mediatek/mtk-cmdq.h
+++ b/include/linux/soc/mediatek/mtk-cmdq.h
@@ -104,6 +104,18 @@ struct cmdq_client *cmdq_mbox_create(struct device *dev, int index,
int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys,
u16 offset, u32 value, u32 mask);
+/*
+ * cmdq_pkt_read_s() - append read_s command to the CMDQ packet
+ * @pkt: the CMDQ packet
+ * @high_addr_reg_idx: internal register ID which contains high address of pa
+ * @addr_low: low address of pa
+ * @reg_idx: the CMDQ internal register ID to cache read data
+ *
+ * Return: 0 for success; else the error code is returned
+ */
+int cmdq_pkt_read_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx, u16 addr_low,
+ u16 reg_idx);
+
/**
* cmdq_pkt_write_s() - append write_s command to the CMDQ packet
* @pkt: the CMDQ packet
--
1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>
To: Matthias Brugger <matthias.bgg@gmail.com>,
Philipp Zabel <p.zabel@pengutronix.de>,
David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
CK Hu <ck.hu@mediatek.com>,
Bibby Hsieh <bibby.hsieh@mediatek.com>,
Houlong Wei <houlong.wei@mediatek.com>
Cc: wsd_upstream@mediatek.com, linux-kernel@vger.kernel.org,
dri-devel@lists.freedesktop.org, HS Liao <hs.liao@mediatek.com>,
Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>,
linux-mediatek@lists.infradead.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 4/9] soc: mediatek: cmdq: add read_s function
Date: Tue, 7 Jul 2020 23:45:09 +0800 [thread overview]
Message-ID: <1594136714-11650-5-git-send-email-dennis-yc.hsieh@mediatek.com> (raw)
In-Reply-To: <1594136714-11650-1-git-send-email-dennis-yc.hsieh@mediatek.com>
Add read_s function in cmdq helper functions which support read value from
register or dma physical address into gce internal register.
Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>
---
drivers/soc/mediatek/mtk-cmdq-helper.c | 15 +++++++++++++++
include/linux/mailbox/mtk-cmdq-mailbox.h | 1 +
include/linux/soc/mediatek/mtk-cmdq.h | 12 ++++++++++++
3 files changed, 28 insertions(+)
diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
index 550e9e7e3ff2..ed9f5e63c195 100644
--- a/drivers/soc/mediatek/mtk-cmdq-helper.c
+++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
@@ -227,6 +227,21 @@ int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys,
}
EXPORT_SYMBOL(cmdq_pkt_write_mask);
+int cmdq_pkt_read_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx, u16 addr_low,
+ u16 reg_idx)
+{
+ struct cmdq_instruction inst = {};
+
+ inst.op = CMDQ_CODE_READ_S;
+ inst.dst_t = CMDQ_REG_TYPE;
+ inst.sop = high_addr_reg_idx;
+ inst.reg_dst = reg_idx;
+ inst.src_reg = addr_low;
+
+ return cmdq_pkt_append_command(pkt, inst);
+}
+EXPORT_SYMBOL(cmdq_pkt_read_s);
+
int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
u16 addr_low, u16 src_reg_idx)
{
diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h
index 90d1d8e64412..efbd8a9eb2d1 100644
--- a/include/linux/mailbox/mtk-cmdq-mailbox.h
+++ b/include/linux/mailbox/mtk-cmdq-mailbox.h
@@ -60,6 +60,7 @@ enum cmdq_code {
CMDQ_CODE_JUMP = 0x10,
CMDQ_CODE_WFE = 0x20,
CMDQ_CODE_EOC = 0x40,
+ CMDQ_CODE_READ_S = 0x80,
CMDQ_CODE_WRITE_S = 0x90,
CMDQ_CODE_WRITE_S_MASK = 0x91,
CMDQ_CODE_LOGIC = 0xa0,
diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
index 53230341bf94..cd7ec714344e 100644
--- a/include/linux/soc/mediatek/mtk-cmdq.h
+++ b/include/linux/soc/mediatek/mtk-cmdq.h
@@ -104,6 +104,18 @@ struct cmdq_client *cmdq_mbox_create(struct device *dev, int index,
int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys,
u16 offset, u32 value, u32 mask);
+/*
+ * cmdq_pkt_read_s() - append read_s command to the CMDQ packet
+ * @pkt: the CMDQ packet
+ * @high_addr_reg_idx: internal register ID which contains high address of pa
+ * @addr_low: low address of pa
+ * @reg_idx: the CMDQ internal register ID to cache read data
+ *
+ * Return: 0 for success; else the error code is returned
+ */
+int cmdq_pkt_read_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx, u16 addr_low,
+ u16 reg_idx);
+
/**
* cmdq_pkt_write_s() - append write_s command to the CMDQ packet
* @pkt: the CMDQ packet
--
1.7.9.5
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
WARNING: multiple messages have this Message-ID (diff)
From: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>
To: Matthias Brugger <matthias.bgg@gmail.com>,
Philipp Zabel <p.zabel@pengutronix.de>,
David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
CK Hu <ck.hu@mediatek.com>,
Bibby Hsieh <bibby.hsieh@mediatek.com>,
Houlong Wei <houlong.wei@mediatek.com>
Cc: wsd_upstream@mediatek.com, linux-kernel@vger.kernel.org,
dri-devel@lists.freedesktop.org, HS Liao <hs.liao@mediatek.com>,
Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>,
linux-mediatek@lists.infradead.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 4/9] soc: mediatek: cmdq: add read_s function
Date: Tue, 7 Jul 2020 23:45:09 +0800 [thread overview]
Message-ID: <1594136714-11650-5-git-send-email-dennis-yc.hsieh@mediatek.com> (raw)
In-Reply-To: <1594136714-11650-1-git-send-email-dennis-yc.hsieh@mediatek.com>
Add read_s function in cmdq helper functions which support read value from
register or dma physical address into gce internal register.
Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>
---
drivers/soc/mediatek/mtk-cmdq-helper.c | 15 +++++++++++++++
include/linux/mailbox/mtk-cmdq-mailbox.h | 1 +
include/linux/soc/mediatek/mtk-cmdq.h | 12 ++++++++++++
3 files changed, 28 insertions(+)
diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
index 550e9e7e3ff2..ed9f5e63c195 100644
--- a/drivers/soc/mediatek/mtk-cmdq-helper.c
+++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
@@ -227,6 +227,21 @@ int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys,
}
EXPORT_SYMBOL(cmdq_pkt_write_mask);
+int cmdq_pkt_read_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx, u16 addr_low,
+ u16 reg_idx)
+{
+ struct cmdq_instruction inst = {};
+
+ inst.op = CMDQ_CODE_READ_S;
+ inst.dst_t = CMDQ_REG_TYPE;
+ inst.sop = high_addr_reg_idx;
+ inst.reg_dst = reg_idx;
+ inst.src_reg = addr_low;
+
+ return cmdq_pkt_append_command(pkt, inst);
+}
+EXPORT_SYMBOL(cmdq_pkt_read_s);
+
int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
u16 addr_low, u16 src_reg_idx)
{
diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h
index 90d1d8e64412..efbd8a9eb2d1 100644
--- a/include/linux/mailbox/mtk-cmdq-mailbox.h
+++ b/include/linux/mailbox/mtk-cmdq-mailbox.h
@@ -60,6 +60,7 @@ enum cmdq_code {
CMDQ_CODE_JUMP = 0x10,
CMDQ_CODE_WFE = 0x20,
CMDQ_CODE_EOC = 0x40,
+ CMDQ_CODE_READ_S = 0x80,
CMDQ_CODE_WRITE_S = 0x90,
CMDQ_CODE_WRITE_S_MASK = 0x91,
CMDQ_CODE_LOGIC = 0xa0,
diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
index 53230341bf94..cd7ec714344e 100644
--- a/include/linux/soc/mediatek/mtk-cmdq.h
+++ b/include/linux/soc/mediatek/mtk-cmdq.h
@@ -104,6 +104,18 @@ struct cmdq_client *cmdq_mbox_create(struct device *dev, int index,
int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys,
u16 offset, u32 value, u32 mask);
+/*
+ * cmdq_pkt_read_s() - append read_s command to the CMDQ packet
+ * @pkt: the CMDQ packet
+ * @high_addr_reg_idx: internal register ID which contains high address of pa
+ * @addr_low: low address of pa
+ * @reg_idx: the CMDQ internal register ID to cache read data
+ *
+ * Return: 0 for success; else the error code is returned
+ */
+int cmdq_pkt_read_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx, u16 addr_low,
+ u16 reg_idx);
+
/**
* cmdq_pkt_write_s() - append write_s command to the CMDQ packet
* @pkt: the CMDQ packet
--
1.7.9.5
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>
To: Matthias Brugger <matthias.bgg@gmail.com>,
Philipp Zabel <p.zabel@pengutronix.de>,
David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
CK Hu <ck.hu@mediatek.com>,
Bibby Hsieh <bibby.hsieh@mediatek.com>,
Houlong Wei <houlong.wei@mediatek.com>
Cc: wsd_upstream@mediatek.com, linux-kernel@vger.kernel.org,
dri-devel@lists.freedesktop.org, HS Liao <hs.liao@mediatek.com>,
Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>,
linux-mediatek@lists.infradead.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 4/9] soc: mediatek: cmdq: add read_s function
Date: Tue, 7 Jul 2020 23:45:09 +0800 [thread overview]
Message-ID: <1594136714-11650-5-git-send-email-dennis-yc.hsieh@mediatek.com> (raw)
In-Reply-To: <1594136714-11650-1-git-send-email-dennis-yc.hsieh@mediatek.com>
Add read_s function in cmdq helper functions which support read value from
register or dma physical address into gce internal register.
Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>
---
drivers/soc/mediatek/mtk-cmdq-helper.c | 15 +++++++++++++++
include/linux/mailbox/mtk-cmdq-mailbox.h | 1 +
include/linux/soc/mediatek/mtk-cmdq.h | 12 ++++++++++++
3 files changed, 28 insertions(+)
diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
index 550e9e7e3ff2..ed9f5e63c195 100644
--- a/drivers/soc/mediatek/mtk-cmdq-helper.c
+++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
@@ -227,6 +227,21 @@ int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys,
}
EXPORT_SYMBOL(cmdq_pkt_write_mask);
+int cmdq_pkt_read_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx, u16 addr_low,
+ u16 reg_idx)
+{
+ struct cmdq_instruction inst = {};
+
+ inst.op = CMDQ_CODE_READ_S;
+ inst.dst_t = CMDQ_REG_TYPE;
+ inst.sop = high_addr_reg_idx;
+ inst.reg_dst = reg_idx;
+ inst.src_reg = addr_low;
+
+ return cmdq_pkt_append_command(pkt, inst);
+}
+EXPORT_SYMBOL(cmdq_pkt_read_s);
+
int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
u16 addr_low, u16 src_reg_idx)
{
diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h
index 90d1d8e64412..efbd8a9eb2d1 100644
--- a/include/linux/mailbox/mtk-cmdq-mailbox.h
+++ b/include/linux/mailbox/mtk-cmdq-mailbox.h
@@ -60,6 +60,7 @@ enum cmdq_code {
CMDQ_CODE_JUMP = 0x10,
CMDQ_CODE_WFE = 0x20,
CMDQ_CODE_EOC = 0x40,
+ CMDQ_CODE_READ_S = 0x80,
CMDQ_CODE_WRITE_S = 0x90,
CMDQ_CODE_WRITE_S_MASK = 0x91,
CMDQ_CODE_LOGIC = 0xa0,
diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
index 53230341bf94..cd7ec714344e 100644
--- a/include/linux/soc/mediatek/mtk-cmdq.h
+++ b/include/linux/soc/mediatek/mtk-cmdq.h
@@ -104,6 +104,18 @@ struct cmdq_client *cmdq_mbox_create(struct device *dev, int index,
int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys,
u16 offset, u32 value, u32 mask);
+/*
+ * cmdq_pkt_read_s() - append read_s command to the CMDQ packet
+ * @pkt: the CMDQ packet
+ * @high_addr_reg_idx: internal register ID which contains high address of pa
+ * @addr_low: low address of pa
+ * @reg_idx: the CMDQ internal register ID to cache read data
+ *
+ * Return: 0 for success; else the error code is returned
+ */
+int cmdq_pkt_read_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx, u16 addr_low,
+ u16 reg_idx);
+
/**
* cmdq_pkt_write_s() - append write_s command to the CMDQ packet
* @pkt: the CMDQ packet
--
1.7.9.5
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2020-07-07 15:46 UTC|newest]
Thread overview: 100+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-07 15:45 [PATCH v3 0/9] support cmdq helper function on mt6779 platform Dennis YC Hsieh
2020-07-07 15:45 ` Dennis YC Hsieh
2020-07-07 15:45 ` Dennis YC Hsieh
2020-07-07 15:45 ` Dennis YC Hsieh
2020-07-07 15:45 ` [PATCH v3 1/9] soc: mediatek: cmdq: add address shift in jump Dennis YC Hsieh
2020-07-07 15:45 ` Dennis YC Hsieh
2020-07-07 15:45 ` Dennis YC Hsieh
2020-07-07 15:45 ` Dennis YC Hsieh
2020-07-08 7:27 ` Bibby Hsieh
2020-07-08 7:27 ` Bibby Hsieh
2020-07-08 7:27 ` Bibby Hsieh
2020-07-08 7:27 ` Bibby Hsieh
2020-09-21 16:15 ` Matthias Brugger
2020-09-21 16:15 ` Matthias Brugger
2020-09-21 16:15 ` Matthias Brugger
2020-09-21 16:15 ` Matthias Brugger
2020-07-07 15:45 ` [PATCH v3 2/9] soc: mediatek: cmdq: add write_s function Dennis YC Hsieh
2020-07-07 15:45 ` Dennis YC Hsieh
2020-07-07 15:45 ` Dennis YC Hsieh
2020-07-07 15:45 ` Dennis YC Hsieh
2020-09-21 16:15 ` Matthias Brugger
2020-09-21 16:15 ` Matthias Brugger
2020-09-21 16:15 ` Matthias Brugger
2020-09-21 16:15 ` Matthias Brugger
2020-07-07 15:45 ` [PATCH v3 3/9] soc: mediatek: cmdq: add write_s_mask function Dennis YC Hsieh
2020-07-07 15:45 ` Dennis YC Hsieh
2020-07-07 15:45 ` Dennis YC Hsieh
2020-07-07 15:45 ` Dennis YC Hsieh
2020-09-21 16:15 ` Matthias Brugger
2020-09-21 16:15 ` Matthias Brugger
2020-09-21 16:15 ` Matthias Brugger
2020-09-21 16:15 ` Matthias Brugger
2020-07-07 15:45 ` Dennis YC Hsieh [this message]
2020-07-07 15:45 ` [PATCH v3 4/9] soc: mediatek: cmdq: add read_s function Dennis YC Hsieh
2020-07-07 15:45 ` Dennis YC Hsieh
2020-07-07 15:45 ` Dennis YC Hsieh
2020-09-21 16:16 ` Matthias Brugger
2020-09-21 16:16 ` Matthias Brugger
2020-09-21 16:16 ` Matthias Brugger
2020-09-21 16:16 ` Matthias Brugger
2020-07-07 15:45 ` [PATCH v3 5/9] soc: mediatek: cmdq: add write_s value function Dennis YC Hsieh
2020-07-07 15:45 ` Dennis YC Hsieh
2020-07-07 15:45 ` Dennis YC Hsieh
2020-07-07 15:45 ` Dennis YC Hsieh
2020-09-21 16:16 ` Matthias Brugger
2020-09-21 16:16 ` Matthias Brugger
2020-09-21 16:16 ` Matthias Brugger
2020-09-21 16:16 ` Matthias Brugger
2020-07-07 15:45 ` [PATCH v3 6/9] soc: mediatek: cmdq: add write_s_mask " Dennis YC Hsieh
2020-07-07 15:45 ` Dennis YC Hsieh
2020-07-07 15:45 ` Dennis YC Hsieh
2020-07-07 15:45 ` Dennis YC Hsieh
2020-09-21 16:16 ` Matthias Brugger
2020-09-21 16:16 ` Matthias Brugger
2020-09-21 16:16 ` Matthias Brugger
2020-09-21 16:16 ` Matthias Brugger
2020-07-07 15:45 ` [PATCH v3 7/9] soc: mediatek: cmdq: add jump function Dennis YC Hsieh
2020-07-07 15:45 ` Dennis YC Hsieh
2020-07-07 15:45 ` Dennis YC Hsieh
2020-07-07 15:45 ` Dennis YC Hsieh
2020-09-21 16:18 ` Matthias Brugger
2020-09-21 16:18 ` Matthias Brugger
2020-09-21 16:18 ` Matthias Brugger
2020-09-21 16:18 ` Matthias Brugger
2020-07-07 15:45 ` [PATCH v3 8/9] soc: mediatek: cmdq: add clear option in cmdq_pkt_wfe api Dennis YC Hsieh
2020-07-07 15:45 ` Dennis YC Hsieh
2020-07-07 15:45 ` Dennis YC Hsieh
2020-07-07 15:45 ` Dennis YC Hsieh
2020-07-07 23:04 ` Chun-Kuang Hu
2020-07-07 23:04 ` Chun-Kuang Hu
2020-07-07 23:04 ` Chun-Kuang Hu
2020-07-07 23:04 ` Chun-Kuang Hu
2020-09-21 16:19 ` Matthias Brugger
2020-09-21 16:19 ` Matthias Brugger
2020-09-21 16:19 ` Matthias Brugger
2020-09-21 16:19 ` Matthias Brugger
2020-09-21 16:25 ` Dennis-YC Hsieh
2020-09-21 16:25 ` Dennis-YC Hsieh
2020-09-21 16:25 ` Dennis-YC Hsieh
2020-09-21 16:25 ` Dennis-YC Hsieh
2020-07-07 15:45 ` [PATCH v3 9/9] drm/mediatek: reduce clear event Dennis YC Hsieh
2020-07-07 15:45 ` Dennis YC Hsieh
2020-07-07 15:45 ` Dennis YC Hsieh
2020-07-07 15:45 ` Dennis YC Hsieh
2020-07-07 23:01 ` Chun-Kuang Hu
2020-07-07 23:01 ` Chun-Kuang Hu
2020-07-07 23:01 ` Chun-Kuang Hu
2020-07-07 23:01 ` Chun-Kuang Hu
2020-09-21 16:37 ` Matthias Brugger
2020-09-21 16:37 ` Matthias Brugger
2020-09-21 16:37 ` Matthias Brugger
2020-09-21 16:37 ` Matthias Brugger
2020-07-09 2:39 ` Bibby Hsieh
2020-07-09 2:39 ` Bibby Hsieh
2020-07-09 2:39 ` Bibby Hsieh
2020-07-09 2:39 ` Bibby Hsieh
2020-09-21 16:36 ` Matthias Brugger
2020-09-21 16:36 ` Matthias Brugger
2020-09-21 16:36 ` Matthias Brugger
2020-09-21 16:36 ` Matthias Brugger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1594136714-11650-5-git-send-email-dennis-yc.hsieh@mediatek.com \
--to=dennis-yc.hsieh@mediatek.com \
--cc=airlied@linux.ie \
--cc=bibby.hsieh@mediatek.com \
--cc=ck.hu@mediatek.com \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=houlong.wei@mediatek.com \
--cc=hs.liao@mediatek.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=p.zabel@pengutronix.de \
--cc=wsd_upstream@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.