From: franck.lenormand@oss.nxp.com To: shawnguo@kernel.org, s.hauer@pengutronix.de, festevam@gmail.com Cc: franck.lenormand@oss.nxp.com, kernel@pengutronix.de, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-imx@nxp.com, aisheng.dong@nxp.com, abel.vesa@nxp.com, Anson.Huang@nxp.com, linux@rempel-privat.de, leonard.crestez@nxp.com, daniel.baluta@nxp.com, qiangqing.zhang@nxp.com, peng.fan@nxp.com Subject: [PATCH v2 0/5] Add support of SECVIO from SNVS on iMX8q/x Date: Tue, 21 Jul 2020 17:20:30 +0200 [thread overview] Message-ID: <1595344835-67746-1-git-send-email-franck.lenormand@oss.nxp.com> (raw) From: Franck LENORMAND <franck.lenormand@oss.nxp.com> This patchset aims to add support for the SECurity VIOlation (SECVIO) of the SNVS. A secvio is a signal emitted by the SNVS when a hardware attack is detected. On imx8x and imx8q SoC, the SNVS is controlled by the SECO and it is possible to interact with it using the SCU using the SC APIs. For the driver to communicate with the SNVS via the SCU and the SECO, I had to: - Add support for exchange of big message with the SCU (needed for imx_scu_irq_get_status) - Add API to check linux can control the SECVIO (imx_sc_rm_is_resource_owned) - Add APIs for the driver to read the state of the SECVIO registers of the SNVS and DGO (imx_sc_seco_secvio_enable and imx_sc_seco_secvio_enable). To check the state of the SECVIO IRQ in the SCU, I added the imx_scu_irq_get_status API. The secvio driver is designed to receive the IRQ produced by the SNVS in case of hardware attack and notify the status to the audit framework which can be used by the user. The goal of the driver is to be self suficient but can be extended by the user to perform custom operations on values read (imx_sc_seco_secvio_enable) v2: - Removed (firmware: imx: scu-rm: Add Resource Management APIs) -> Code required is already present - Removed (firmware: imx: scu: Support reception of messages of any size) -> The imx-scu is already working in fast-ipc mode - (soc: imx8: Add the SC SECVIO driver): - Fixed the warnings reported by kernel test robot Franck LENORMAND (5): firmware: imx: scu-seco: Add SEcure Controller APIS firmware: imx: scu-irq: Add API to retrieve status of IRQ dt-bindings: firmware: imx-scu: Add SECVIO resource dt-bindings: arm: imx: Documentation of the SC secvio driver soc: imx8: Add the SC SECVIO driver .../bindings/arm/freescale/fsl,imx-sc-secvio.yaml | 34 + drivers/firmware/imx/Makefile | 2 +- drivers/firmware/imx/imx-scu-irq.c | 37 +- drivers/firmware/imx/imx-scu.c | 3 + drivers/firmware/imx/seco.c | 275 +++++++ drivers/soc/imx/Kconfig | 10 + drivers/soc/imx/Makefile | 1 + drivers/soc/imx/secvio/Kconfig | 10 + drivers/soc/imx/secvio/Makefile | 3 + drivers/soc/imx/secvio/imx-secvio-audit.c | 39 + drivers/soc/imx/secvio/imx-secvio-debugfs.c | 379 +++++++++ drivers/soc/imx/secvio/imx-secvio-sc-int.h | 84 ++ drivers/soc/imx/secvio/imx-secvio-sc.c | 858 +++++++++++++++++++++ include/dt-bindings/firmware/imx/rsrc.h | 3 +- include/linux/firmware/imx/ipc.h | 1 + include/linux/firmware/imx/sci.h | 5 + include/linux/firmware/imx/svc/seco.h | 73 ++ include/soc/imx/imx-secvio-sc.h | 177 +++++ 18 files changed, 1991 insertions(+), 3 deletions(-) create mode 100644 Documentation/devicetree/bindings/arm/freescale/fsl,imx-sc-secvio.yaml create mode 100644 drivers/firmware/imx/seco.c create mode 100644 drivers/soc/imx/secvio/Kconfig create mode 100644 drivers/soc/imx/secvio/Makefile create mode 100644 drivers/soc/imx/secvio/imx-secvio-audit.c create mode 100644 drivers/soc/imx/secvio/imx-secvio-debugfs.c create mode 100644 drivers/soc/imx/secvio/imx-secvio-sc-int.h create mode 100644 drivers/soc/imx/secvio/imx-secvio-sc.c create mode 100644 include/linux/firmware/imx/svc/seco.h create mode 100644 include/soc/imx/imx-secvio-sc.h -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: franck.lenormand@oss.nxp.com To: shawnguo@kernel.org, s.hauer@pengutronix.de, festevam@gmail.com Cc: aisheng.dong@nxp.com, peng.fan@nxp.com, leonard.crestez@nxp.com, abel.vesa@nxp.com, Anson.Huang@nxp.com, linux-kernel@vger.kernel.org, linux@rempel-privat.de, linux-imx@nxp.com, kernel@pengutronix.de, qiangqing.zhang@nxp.com, franck.lenormand@oss.nxp.com, daniel.baluta@nxp.com, linux-arm-kernel@lists.infradead.org Subject: [PATCH v2 0/5] Add support of SECVIO from SNVS on iMX8q/x Date: Tue, 21 Jul 2020 17:20:30 +0200 [thread overview] Message-ID: <1595344835-67746-1-git-send-email-franck.lenormand@oss.nxp.com> (raw) From: Franck LENORMAND <franck.lenormand@oss.nxp.com> This patchset aims to add support for the SECurity VIOlation (SECVIO) of the SNVS. A secvio is a signal emitted by the SNVS when a hardware attack is detected. On imx8x and imx8q SoC, the SNVS is controlled by the SECO and it is possible to interact with it using the SCU using the SC APIs. For the driver to communicate with the SNVS via the SCU and the SECO, I had to: - Add support for exchange of big message with the SCU (needed for imx_scu_irq_get_status) - Add API to check linux can control the SECVIO (imx_sc_rm_is_resource_owned) - Add APIs for the driver to read the state of the SECVIO registers of the SNVS and DGO (imx_sc_seco_secvio_enable and imx_sc_seco_secvio_enable). To check the state of the SECVIO IRQ in the SCU, I added the imx_scu_irq_get_status API. The secvio driver is designed to receive the IRQ produced by the SNVS in case of hardware attack and notify the status to the audit framework which can be used by the user. The goal of the driver is to be self suficient but can be extended by the user to perform custom operations on values read (imx_sc_seco_secvio_enable) v2: - Removed (firmware: imx: scu-rm: Add Resource Management APIs) -> Code required is already present - Removed (firmware: imx: scu: Support reception of messages of any size) -> The imx-scu is already working in fast-ipc mode - (soc: imx8: Add the SC SECVIO driver): - Fixed the warnings reported by kernel test robot Franck LENORMAND (5): firmware: imx: scu-seco: Add SEcure Controller APIS firmware: imx: scu-irq: Add API to retrieve status of IRQ dt-bindings: firmware: imx-scu: Add SECVIO resource dt-bindings: arm: imx: Documentation of the SC secvio driver soc: imx8: Add the SC SECVIO driver .../bindings/arm/freescale/fsl,imx-sc-secvio.yaml | 34 + drivers/firmware/imx/Makefile | 2 +- drivers/firmware/imx/imx-scu-irq.c | 37 +- drivers/firmware/imx/imx-scu.c | 3 + drivers/firmware/imx/seco.c | 275 +++++++ drivers/soc/imx/Kconfig | 10 + drivers/soc/imx/Makefile | 1 + drivers/soc/imx/secvio/Kconfig | 10 + drivers/soc/imx/secvio/Makefile | 3 + drivers/soc/imx/secvio/imx-secvio-audit.c | 39 + drivers/soc/imx/secvio/imx-secvio-debugfs.c | 379 +++++++++ drivers/soc/imx/secvio/imx-secvio-sc-int.h | 84 ++ drivers/soc/imx/secvio/imx-secvio-sc.c | 858 +++++++++++++++++++++ include/dt-bindings/firmware/imx/rsrc.h | 3 +- include/linux/firmware/imx/ipc.h | 1 + include/linux/firmware/imx/sci.h | 5 + include/linux/firmware/imx/svc/seco.h | 73 ++ include/soc/imx/imx-secvio-sc.h | 177 +++++ 18 files changed, 1991 insertions(+), 3 deletions(-) create mode 100644 Documentation/devicetree/bindings/arm/freescale/fsl,imx-sc-secvio.yaml create mode 100644 drivers/firmware/imx/seco.c create mode 100644 drivers/soc/imx/secvio/Kconfig create mode 100644 drivers/soc/imx/secvio/Makefile create mode 100644 drivers/soc/imx/secvio/imx-secvio-audit.c create mode 100644 drivers/soc/imx/secvio/imx-secvio-debugfs.c create mode 100644 drivers/soc/imx/secvio/imx-secvio-sc-int.h create mode 100644 drivers/soc/imx/secvio/imx-secvio-sc.c create mode 100644 include/linux/firmware/imx/svc/seco.h create mode 100644 include/soc/imx/imx-secvio-sc.h -- 2.7.4 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2020-07-21 15:20 UTC|newest] Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-07-21 15:20 franck.lenormand [this message] 2020-07-21 15:20 ` [PATCH v2 0/5] Add support of SECVIO from SNVS on iMX8q/x franck.lenormand 2020-07-21 15:20 ` [PATCH v2 1/5] firmware: imx: scu-seco: Add SEcure Controller APIS franck.lenormand 2020-07-21 15:20 ` franck.lenormand 2020-10-18 4:30 ` Aisheng Dong 2020-10-18 4:30 ` Aisheng Dong 2020-07-21 15:20 ` [PATCH v2 2/5] firmware: imx: scu-irq: Add API to retrieve status of IRQ franck.lenormand 2020-07-21 15:20 ` franck.lenormand 2020-10-18 4:48 ` Aisheng Dong 2020-10-18 4:48 ` Aisheng Dong 2020-07-21 15:20 ` [PATCH v2 3/5] dt-bindings: firmware: imx-scu: Add SECVIO resource franck.lenormand 2020-07-21 15:20 ` franck.lenormand 2020-10-18 4:50 ` Aisheng Dong 2020-10-18 4:50 ` Aisheng Dong 2020-07-21 15:20 ` [PATCH v2 4/5] dt-bindings: arm: imx: Documentation of the SC secvio driver franck.lenormand 2020-07-21 15:20 ` franck.lenormand 2020-10-18 5:03 ` Aisheng Dong 2020-10-18 5:03 ` Aisheng Dong 2020-07-21 15:20 ` [PATCH v2 5/5] soc: imx8: Add the SC SECVIO driver franck.lenormand 2020-07-21 15:20 ` franck.lenormand 2020-08-19 13:31 ` Shawn Guo 2020-08-19 13:31 ` Shawn Guo 2020-09-07 9:49 ` Franck Lenormand (OSS) 2020-09-07 9:49 ` Franck Lenormand (OSS) 2020-10-18 5:21 ` Aisheng Dong 2020-10-18 5:21 ` Aisheng Dong 2020-10-18 9:31 ` Borislav Petkov 2020-10-18 9:31 ` Borislav Petkov 2020-10-19 1:08 ` Peng Fan 2020-10-19 1:08 ` Peng Fan 2020-08-18 7:52 ` [PATCH v2 0/5] Add support of SECVIO from SNVS on iMX8q/x Franck LENORMAND (OSS) 2020-08-18 7:52 ` Franck LENORMAND (OSS) 2020-08-19 13:23 ` Shawn Guo 2020-08-19 13:23 ` Shawn Guo 2020-09-14 3:43 ` Aisheng Dong 2020-09-14 3:43 ` Aisheng Dong
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1595344835-67746-1-git-send-email-franck.lenormand@oss.nxp.com \ --to=franck.lenormand@oss.nxp.com \ --cc=Anson.Huang@nxp.com \ --cc=abel.vesa@nxp.com \ --cc=aisheng.dong@nxp.com \ --cc=daniel.baluta@nxp.com \ --cc=festevam@gmail.com \ --cc=kernel@pengutronix.de \ --cc=leonard.crestez@nxp.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-imx@nxp.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux@rempel-privat.de \ --cc=peng.fan@nxp.com \ --cc=qiangqing.zhang@nxp.com \ --cc=s.hauer@pengutronix.de \ --cc=shawnguo@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.