[PATCH v2 for-next 3/7] RDMA/hns: Avoid setting loopback indicator when smac is same as dmac

From: Weihang Li <liweihang@huawei.com>
To: <dledford@redhat.com>, <jgg@ziepe.ca>
Cc: <leon@kernel.org>, <linux-rdma@vger.kernel.org>, <linuxarm@huawei.com>
Subject: [PATCH v2 for-next 3/7] RDMA/hns: Avoid setting loopback indicator when smac is same as dmac
Date: Mon, 16 Nov 2020 19:33:24 +0800	[thread overview]
Message-ID: <1605526408-6936-4-git-send-email-liweihang@huawei.com> (raw)
In-Reply-To: <1605526408-6936-1-git-send-email-liweihang@huawei.com>

The loopback flag will be set to 1 by the hardware when the source mac
address is same as the destination mac address. So the driver don't need to
compare them.

Fixes: d6a3627e311c ("RDMA/hns: Optimize wqe buffer set flow for post send")
Signed-off-by: Weihang Li <liweihang@huawei.com>
---
 drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 9 ---------
 1 file changed, 9 deletions(-)

diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
index 3895a2a..bd09df4 100644
--- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
+++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
@@ -433,8 +433,6 @@ static inline int set_ud_wqe(struct hns_roce_qp *qp,
 	unsigned int curr_idx = *sge_idx;
 	int valid_num_sge;
 	u32 msg_len = 0;
-	bool loopback;
-	u8 *smac;
 	int ret;
 
 	valid_num_sge = calc_wr_sge_num(wr, &msg_len);
@@ -457,13 +455,6 @@ static inline int set_ud_wqe(struct hns_roce_qp *qp,
 	roce_set_field(ud_sq_wqe->byte_48, V2_UD_SEND_WQE_BYTE_48_DMAC_5_M,
 		       V2_UD_SEND_WQE_BYTE_48_DMAC_5_S, ah->av.mac[5]);
 
-	/* MAC loopback */
-	smac = (u8 *)hr_dev->dev_addr[qp->port];
-	loopback = ether_addr_equal_unaligned(ah->av.mac, smac) ? 1 : 0;
-
-	roce_set_bit(ud_sq_wqe->byte_40,
-		     V2_UD_SEND_WQE_BYTE_40_LBI_S, loopback);
-
 	ud_sq_wqe->msg_len = cpu_to_le32(msg_len);
 
 	/* Set sig attr */
-- 
2.8.1

