From: Kalle Valo <kvalo@codeaurora.org> To: ath11k@lists.infradead.org Cc: linux-wireless@vger.kernel.org Subject: [PATCH 5/6] ath11k: pci: disable VDD4BLOW Date: Thu, 10 Dec 2020 16:05:23 +0200 [thread overview] Message-ID: <1607609124-17250-6-git-send-email-kvalo@codeaurora.org> (raw) In-Reply-To: <1607609124-17250-1-git-send-email-kvalo@codeaurora.org> From: Carl Huang <cjhuang@codeaurora.org> It's recommended to disable VDD4BLOW during initialisation. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> --- drivers/net/wireless/ath/ath11k/pci.c | 10 ++++++++++ drivers/net/wireless/ath/ath11k/pci.h | 3 +++ 2 files changed, 13 insertions(+) diff --git a/drivers/net/wireless/ath/ath11k/pci.c b/drivers/net/wireless/ath/ath11k/pci.c index 064c35052697..818e37c32a85 100644 --- a/drivers/net/wireless/ath/ath11k/pci.c +++ b/drivers/net/wireless/ath/ath11k/pci.c @@ -346,6 +346,15 @@ static void ath11k_pci_clear_all_intrs(struct ath11k_base *ab) ath11k_pci_write32(ab, PCIE_PCIE_INT_ALL_CLEAR, PCIE_INT_CLEAR_ALL); } +static void ath11k_pci_set_wlaon_pwr_ctrl(struct ath11k_base *ab) +{ + u32 val; + + val = ath11k_pci_read32(ab, WLAON_QFPROM_PWR_CTRL_REG); + val &= ~QFPROM_PWR_CTRL_VDD4BLOW_MASK; + ath11k_pci_write32(ab, WLAON_QFPROM_PWR_CTRL_REG, val); +} + static void ath11k_pci_force_wake(struct ath11k_base *ab) { ath11k_pci_write32(ab, PCIE_SOC_WAKE_PCIE_LOCAL_REG, 1); @@ -357,6 +366,7 @@ static void ath11k_pci_sw_reset(struct ath11k_base *ab, bool power_on) if (power_on) { ath11k_pci_enable_ltssm(ab); ath11k_pci_clear_all_intrs(ab); + ath11k_pci_set_wlaon_pwr_ctrl(ab); ath11k_pci_fix_l1ss(ab); } diff --git a/drivers/net/wireless/ath/ath11k/pci.h b/drivers/net/wireless/ath/ath11k/pci.h index 6e7cc8904c3d..0432a702416b 100644 --- a/drivers/net/wireless/ath/ath11k/pci.h +++ b/drivers/net/wireless/ath/ath11k/pci.h @@ -45,6 +45,9 @@ #define PCIE_USB3_PCS_MISC_OSC_DTCT_CONFIG4_VAL 0xff #define PCIE_USB3_PCS_MISC_OSC_DTCT_CONFIG_MSK 0x000000ff +#define WLAON_QFPROM_PWR_CTRL_REG 0x01f8031c +#define QFPROM_PWR_CTRL_VDD4BLOW_MASK 0x4 + struct ath11k_msi_user { char *name; int num_vectors; -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Kalle Valo <kvalo@codeaurora.org> To: ath11k@lists.infradead.org Cc: linux-wireless@vger.kernel.org Subject: [PATCH 5/6] ath11k: pci: disable VDD4BLOW Date: Thu, 10 Dec 2020 16:05:23 +0200 [thread overview] Message-ID: <1607609124-17250-6-git-send-email-kvalo@codeaurora.org> (raw) In-Reply-To: <1607609124-17250-1-git-send-email-kvalo@codeaurora.org> From: Carl Huang <cjhuang@codeaurora.org> It's recommended to disable VDD4BLOW during initialisation. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> --- drivers/net/wireless/ath/ath11k/pci.c | 10 ++++++++++ drivers/net/wireless/ath/ath11k/pci.h | 3 +++ 2 files changed, 13 insertions(+) diff --git a/drivers/net/wireless/ath/ath11k/pci.c b/drivers/net/wireless/ath/ath11k/pci.c index 064c35052697..818e37c32a85 100644 --- a/drivers/net/wireless/ath/ath11k/pci.c +++ b/drivers/net/wireless/ath/ath11k/pci.c @@ -346,6 +346,15 @@ static void ath11k_pci_clear_all_intrs(struct ath11k_base *ab) ath11k_pci_write32(ab, PCIE_PCIE_INT_ALL_CLEAR, PCIE_INT_CLEAR_ALL); } +static void ath11k_pci_set_wlaon_pwr_ctrl(struct ath11k_base *ab) +{ + u32 val; + + val = ath11k_pci_read32(ab, WLAON_QFPROM_PWR_CTRL_REG); + val &= ~QFPROM_PWR_CTRL_VDD4BLOW_MASK; + ath11k_pci_write32(ab, WLAON_QFPROM_PWR_CTRL_REG, val); +} + static void ath11k_pci_force_wake(struct ath11k_base *ab) { ath11k_pci_write32(ab, PCIE_SOC_WAKE_PCIE_LOCAL_REG, 1); @@ -357,6 +366,7 @@ static void ath11k_pci_sw_reset(struct ath11k_base *ab, bool power_on) if (power_on) { ath11k_pci_enable_ltssm(ab); ath11k_pci_clear_all_intrs(ab); + ath11k_pci_set_wlaon_pwr_ctrl(ab); ath11k_pci_fix_l1ss(ab); } diff --git a/drivers/net/wireless/ath/ath11k/pci.h b/drivers/net/wireless/ath/ath11k/pci.h index 6e7cc8904c3d..0432a702416b 100644 --- a/drivers/net/wireless/ath/ath11k/pci.h +++ b/drivers/net/wireless/ath/ath11k/pci.h @@ -45,6 +45,9 @@ #define PCIE_USB3_PCS_MISC_OSC_DTCT_CONFIG4_VAL 0xff #define PCIE_USB3_PCS_MISC_OSC_DTCT_CONFIG_MSK 0x000000ff +#define WLAON_QFPROM_PWR_CTRL_REG 0x01f8031c +#define QFPROM_PWR_CTRL_VDD4BLOW_MASK 0x4 + struct ath11k_msi_user { char *name; int num_vectors; -- 2.7.4 -- ath11k mailing list ath11k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath11k
next prev parent reply other threads:[~2020-12-10 14:06 UTC|newest] Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-12-10 14:05 [PATCH 0/6] ath11k: QCA6390 stability fixes Kalle Valo 2020-12-10 14:05 ` Kalle Valo 2020-12-10 14:05 ` [PATCH 1/6] ath11k: mhi: print a warning if firmware crashed Kalle Valo 2020-12-10 14:05 ` Kalle Valo 2020-12-12 4:40 ` Kalle Valo 2020-12-12 4:40 ` Kalle Valo 2020-12-10 14:05 ` [PATCH 2/6] ath11k: put hw to DBS using WMI_PDEV_SET_HW_MODE_CMDID Kalle Valo 2020-12-10 14:05 ` Kalle Valo 2020-12-10 14:05 ` [PATCH 3/6] ath11k: pci: fix hot reset stability issues Kalle Valo 2020-12-10 14:05 ` Kalle Valo 2020-12-10 14:05 ` [PATCH 4/6] ath11k: pci: fix L1ss clock unstable problem Kalle Valo 2020-12-10 14:05 ` Kalle Valo 2020-12-10 14:05 ` Kalle Valo [this message] 2020-12-10 14:05 ` [PATCH 5/6] ath11k: pci: disable VDD4BLOW Kalle Valo 2020-12-10 22:04 ` Peter Oh 2020-12-10 22:04 ` Peter Oh 2020-12-11 6:31 ` Kalle Valo 2020-12-11 6:31 ` Kalle Valo 2020-12-10 14:05 ` [PATCH 6/6] ath11k: Fix incorrect tlvs in scan start command Kalle Valo 2020-12-10 14:05 ` Kalle Valo 2020-12-10 14:14 ` [PATCH 0/6] ath11k: QCA6390 stability fixes Kalle Valo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1607609124-17250-6-git-send-email-kvalo@codeaurora.org \ --to=kvalo@codeaurora.org \ --cc=ath11k@lists.infradead.org \ --cc=linux-wireless@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.