From: dillon.minfei@gmail.com To: robh@kernel.org, valentin.caron@foss.st.com, Alexandre.torgue@foss.st.com, rong.a.chen@intel.com, a.fatoum@pengutronix.de, mcoquelin.stm32@gmail.com, devicetree@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux@armlinux.org.uk, vladimir.murzin@arm.com, afzal.mohd.ma@gmail.com, gregkh@linuxfoundation.org, erwan.leray@foss.st.com, erwan.leray@st.com, linux-serial@vger.kernel.org, lkp@intel.com Cc: dillon min <dillon.minfei@gmail.com> Subject: [PATCH v6 0/9] ARM: STM32: add art-pi(stm32h750xbh6) board support Date: Fri, 26 Mar 2021 19:14:55 +0800 [thread overview] Message-ID: <1616757302-7889-1-git-send-email-dillon.minfei@gmail.com> (raw) From: dillon min <dillon.minfei@gmail.com> This patchset intend to add art-pi board support, this board developed by rt-thread(https://www.rt-thread.org/). Board resources: 8MiB QSPI flash 16MiB SPI flash 32MiB SDRAM AP6212 wifi,bt,fm comb sw context: - as stm32h750 just has 128k bytes internal flash, so running a fw on internal flash to download u-boot/kernel to qspi flash, boot u-boot/kernel from qspi flash. this fw is based on rt-thread. - kernel can be xip on qspi flash or load to sdram - root filesystem is jffs2(created by buildroot), stored on spi flash to support the boad, add following changes. - fix r0-r3, r12 register restore failed after svc call, - add dts binding - update yaml doc --- changes in v6: - add gpiox{gpio-ranges, ngpios} in stm32h7-pinctrl.dtsi - add status="disabled" in stm32h743.dtsi changes in v5: - accroding to rob's suggestion, replace false with 'type: object' of 'additionalProperties'. - add Tested-by: Valentin Caron <valentin.caron@foss.st.com> changes in v4: - use unevaluatedProperties: false to fix dtbs_check warrnings instead of add 'bluetooth' in st,stm32-uart.yaml changes in v3: - fix dtbs_check warrning: (8002cbd78fd5 and 4bc21d3dd678) >> arch/arm/boot/dts/stm32h743i-eval.dt.yaml: soc: pin-controller: {'type': 'object'} is not allowed for {'#address-cells': [[1]], '#size-cells': [[1]], 'ranges': [[0, >> arch/arm/boot/dts/stm32h743i-eval.dt.yaml: soc: 'i2c@40005C00', 'i2c@58001C00' do not match any of the regexes: '@(0|[1-9a-f][0-9a-f]*)$', '^[^@]+$', 'pinctrl-[0-9]+' >> arch/arm/boot/dts/stm32h750i-art-pi.dt.yaml: serial@40004800: 'bluetooth' does not match any of the regexes: 'pinctrl-[0-9]+' changes in v2: - reorganize the pinctrl device tree about stm32h7-pinctrl/stm32h743/750-pinctrl stm32h7-pinctrl.dtsi --> stm32h743-pinctrl.dtsi --> stm32h743i-disco.dts | |-> stm32h743i-eval.dts |-> stm32h750-pinctrl.dtsi --> stm32h750i-art-pi.dts same to the stm32f7/f4's pinctrl style - fix author name/copyright mistake - add compatible string st,stm32h750-pinctrl to pinctl-stm32h743.c as they have same pin alternate functions, update Kconfig description - make item in stm32h750i-art-pi.dts sort by letter dillon min (9): Documentation: arm: stm32: Add stm32h750 value line doc dt-bindings: arm: stm32: Add compatible strings for ART-PI board dt-bindings: pinctrl: stm32: Add stm32h750 pinctrl ARM: dts: stm32: introduce stm32h7-pinctrl.dtsi to support stm32h750 ARM: dts: stm32: add stm32h750-pinctrl.dtsi ARM: dts: stm32: add support for art-pi board based on stm32h750xbh6 ARM: stm32: Add a new SOC - STM32H750 pinctrl: stm32: Add STM32H750 MCU pinctrl support dt-bindings: serial: stm32: Use 'type: object' instead of false for 'additionalProperties' Documentation/arm/index.rst | 1 + Documentation/arm/stm32/stm32h750-overview.rst | 34 ++ .../devicetree/bindings/arm/stm32/stm32.yaml | 4 + .../bindings/pinctrl/st,stm32-pinctrl.yaml | 1 + .../devicetree/bindings/serial/st,stm32-uart.yaml | 3 +- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/stm32h7-pinctrl.dtsi | 341 +++++++++++++++++++++ arch/arm/boot/dts/stm32h743-pinctrl.dtsi | 307 +------------------ arch/arm/boot/dts/stm32h743.dtsi | 164 +++++++++- arch/arm/boot/dts/stm32h750-pinctrl.dtsi | 12 + arch/arm/boot/dts/stm32h750.dtsi | 6 + arch/arm/boot/dts/stm32h750i-art-pi.dts | 229 ++++++++++++++ arch/arm/mach-stm32/board-dt.c | 1 + drivers/pinctrl/stm32/Kconfig | 2 +- drivers/pinctrl/stm32/pinctrl-stm32h743.c | 3 + 15 files changed, 804 insertions(+), 305 deletions(-) create mode 100644 Documentation/arm/stm32/stm32h750-overview.rst create mode 100644 arch/arm/boot/dts/stm32h7-pinctrl.dtsi create mode 100644 arch/arm/boot/dts/stm32h750-pinctrl.dtsi create mode 100644 arch/arm/boot/dts/stm32h750.dtsi create mode 100644 arch/arm/boot/dts/stm32h750i-art-pi.dts -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: dillon.minfei@gmail.com To: robh@kernel.org, valentin.caron@foss.st.com, Alexandre.torgue@foss.st.com, rong.a.chen@intel.com, a.fatoum@pengutronix.de, mcoquelin.stm32@gmail.com, devicetree@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux@armlinux.org.uk, vladimir.murzin@arm.com, afzal.mohd.ma@gmail.com, gregkh@linuxfoundation.org, erwan.leray@foss.st.com, erwan.leray@st.com, linux-serial@vger.kernel.org, lkp@intel.com Cc: dillon min <dillon.minfei@gmail.com> Subject: [PATCH v6 0/9] ARM: STM32: add art-pi(stm32h750xbh6) board support Date: Fri, 26 Mar 2021 19:14:55 +0800 [thread overview] Message-ID: <1616757302-7889-1-git-send-email-dillon.minfei@gmail.com> (raw) From: dillon min <dillon.minfei@gmail.com> This patchset intend to add art-pi board support, this board developed by rt-thread(https://www.rt-thread.org/). Board resources: 8MiB QSPI flash 16MiB SPI flash 32MiB SDRAM AP6212 wifi,bt,fm comb sw context: - as stm32h750 just has 128k bytes internal flash, so running a fw on internal flash to download u-boot/kernel to qspi flash, boot u-boot/kernel from qspi flash. this fw is based on rt-thread. - kernel can be xip on qspi flash or load to sdram - root filesystem is jffs2(created by buildroot), stored on spi flash to support the boad, add following changes. - fix r0-r3, r12 register restore failed after svc call, - add dts binding - update yaml doc --- changes in v6: - add gpiox{gpio-ranges, ngpios} in stm32h7-pinctrl.dtsi - add status="disabled" in stm32h743.dtsi changes in v5: - accroding to rob's suggestion, replace false with 'type: object' of 'additionalProperties'. - add Tested-by: Valentin Caron <valentin.caron@foss.st.com> changes in v4: - use unevaluatedProperties: false to fix dtbs_check warrnings instead of add 'bluetooth' in st,stm32-uart.yaml changes in v3: - fix dtbs_check warrning: (8002cbd78fd5 and 4bc21d3dd678) >> arch/arm/boot/dts/stm32h743i-eval.dt.yaml: soc: pin-controller: {'type': 'object'} is not allowed for {'#address-cells': [[1]], '#size-cells': [[1]], 'ranges': [[0, >> arch/arm/boot/dts/stm32h743i-eval.dt.yaml: soc: 'i2c@40005C00', 'i2c@58001C00' do not match any of the regexes: '@(0|[1-9a-f][0-9a-f]*)$', '^[^@]+$', 'pinctrl-[0-9]+' >> arch/arm/boot/dts/stm32h750i-art-pi.dt.yaml: serial@40004800: 'bluetooth' does not match any of the regexes: 'pinctrl-[0-9]+' changes in v2: - reorganize the pinctrl device tree about stm32h7-pinctrl/stm32h743/750-pinctrl stm32h7-pinctrl.dtsi --> stm32h743-pinctrl.dtsi --> stm32h743i-disco.dts | |-> stm32h743i-eval.dts |-> stm32h750-pinctrl.dtsi --> stm32h750i-art-pi.dts same to the stm32f7/f4's pinctrl style - fix author name/copyright mistake - add compatible string st,stm32h750-pinctrl to pinctl-stm32h743.c as they have same pin alternate functions, update Kconfig description - make item in stm32h750i-art-pi.dts sort by letter dillon min (9): Documentation: arm: stm32: Add stm32h750 value line doc dt-bindings: arm: stm32: Add compatible strings for ART-PI board dt-bindings: pinctrl: stm32: Add stm32h750 pinctrl ARM: dts: stm32: introduce stm32h7-pinctrl.dtsi to support stm32h750 ARM: dts: stm32: add stm32h750-pinctrl.dtsi ARM: dts: stm32: add support for art-pi board based on stm32h750xbh6 ARM: stm32: Add a new SOC - STM32H750 pinctrl: stm32: Add STM32H750 MCU pinctrl support dt-bindings: serial: stm32: Use 'type: object' instead of false for 'additionalProperties' Documentation/arm/index.rst | 1 + Documentation/arm/stm32/stm32h750-overview.rst | 34 ++ .../devicetree/bindings/arm/stm32/stm32.yaml | 4 + .../bindings/pinctrl/st,stm32-pinctrl.yaml | 1 + .../devicetree/bindings/serial/st,stm32-uart.yaml | 3 +- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/stm32h7-pinctrl.dtsi | 341 +++++++++++++++++++++ arch/arm/boot/dts/stm32h743-pinctrl.dtsi | 307 +------------------ arch/arm/boot/dts/stm32h743.dtsi | 164 +++++++++- arch/arm/boot/dts/stm32h750-pinctrl.dtsi | 12 + arch/arm/boot/dts/stm32h750.dtsi | 6 + arch/arm/boot/dts/stm32h750i-art-pi.dts | 229 ++++++++++++++ arch/arm/mach-stm32/board-dt.c | 1 + drivers/pinctrl/stm32/Kconfig | 2 +- drivers/pinctrl/stm32/pinctrl-stm32h743.c | 3 + 15 files changed, 804 insertions(+), 305 deletions(-) create mode 100644 Documentation/arm/stm32/stm32h750-overview.rst create mode 100644 arch/arm/boot/dts/stm32h7-pinctrl.dtsi create mode 100644 arch/arm/boot/dts/stm32h750-pinctrl.dtsi create mode 100644 arch/arm/boot/dts/stm32h750.dtsi create mode 100644 arch/arm/boot/dts/stm32h750i-art-pi.dts -- 2.7.4 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2021-03-26 11:16 UTC|newest] Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-03-26 11:14 dillon.minfei [this message] 2021-03-26 11:14 ` [PATCH v6 0/9] ARM: STM32: add art-pi(stm32h750xbh6) board support dillon.minfei 2021-03-26 11:14 ` [PATCH v6 1/9] Documentation: arm: stm32: Add stm32h750 value line doc dillon.minfei 2021-03-26 11:14 ` dillon.minfei 2021-03-26 11:14 ` [PATCH v6 4/9] ARM: dts: stm32: introduce stm32h7-pinctrl.dtsi to support stm32h750 dillon.minfei 2021-03-26 11:14 ` dillon.minfei 2021-03-26 11:14 ` [PATCH v6 5/9] ARM: dts: stm32: add stm32h750-pinctrl.dtsi dillon.minfei 2021-03-26 11:14 ` dillon.minfei 2021-03-26 11:14 ` [PATCH v6 6/9] ARM: dts: stm32: add support for art-pi board based on stm32h750xbh6 dillon.minfei 2021-03-26 11:14 ` dillon.minfei 2021-03-26 11:15 ` [PATCH v6 7/9] ARM: stm32: Add a new SOC - STM32H750 dillon.minfei 2021-03-26 11:15 ` dillon.minfei 2021-03-26 11:15 ` [PATCH v6 8/9] pinctrl: stm32: Add STM32H750 MCU pinctrl support dillon.minfei 2021-03-26 11:15 ` dillon.minfei 2021-03-26 11:15 ` [PATCH v6 9/9] dt-bindings: serial: stm32: Use 'type: object' instead of false for 'additionalProperties' dillon.minfei 2021-03-26 11:15 ` dillon.minfei 2021-03-26 20:18 ` Rob Herring 2021-03-26 20:18 ` Rob Herring
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1616757302-7889-1-git-send-email-dillon.minfei@gmail.com \ --to=dillon.minfei@gmail.com \ --cc=Alexandre.torgue@foss.st.com \ --cc=a.fatoum@pengutronix.de \ --cc=afzal.mohd.ma@gmail.com \ --cc=devicetree@vger.kernel.org \ --cc=erwan.leray@foss.st.com \ --cc=erwan.leray@st.com \ --cc=gregkh@linuxfoundation.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-serial@vger.kernel.org \ --cc=linux-stm32@st-md-mailman.stormreply.com \ --cc=linux@armlinux.org.uk \ --cc=lkp@intel.com \ --cc=mcoquelin.stm32@gmail.com \ --cc=robh@kernel.org \ --cc=rong.a.chen@intel.com \ --cc=valentin.caron@foss.st.com \ --cc=vladimir.murzin@arm.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.