From: satya priya <skakit@codeaurora.org>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Rob Herring <robh+dt@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
rnayak@codeaurora.org, linux-arm-msm@vger.kernel.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
kgunda@codeaurora.org, satya priya <skakit@codeaurora.org>
Subject: [PATCH V3 2/5] regulator: qcom-rpmh: Add PM7325/PMR735A regulator support
Date: Wed, 31 Mar 2021 17:35:36 +0530 [thread overview]
Message-ID: <1617192339-3760-3-git-send-email-skakit@codeaurora.org> (raw)
In-Reply-To: <1617192339-3760-1-git-send-email-skakit@codeaurora.org>
Add support for PM7325/PMR735A regulators. This ensures
that consumers are able to modify the physical state of PMIC
regulators.
Signed-off-by: satya priya <skakit@codeaurora.org>
---
Changes in V2:
- No change.
Changes in V3:
- No change.
drivers/regulator/qcom-rpmh-regulator.c | 53 ++++++++++++++++++++++++++++++++-
1 file changed, 52 insertions(+), 1 deletion(-)
diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c
index 2bd2439..22fec37 100644
--- a/drivers/regulator/qcom-rpmh-regulator.c
+++ b/drivers/regulator/qcom-rpmh-regulator.c
@@ -1,5 +1,5 @@
// SPDX-License-Identifier: GPL-2.0
-// Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.
+// Copyright (c) 2018-2021, The Linux Foundation. All rights reserved.
#define pr_fmt(fmt) "%s: " fmt, __func__
@@ -1042,6 +1042,49 @@ static const struct rpmh_vreg_init_data pmx55_vreg_data[] = {
{},
};
+static const struct rpmh_vreg_init_data pm7325_vreg_data[] = {
+ RPMH_VREG("smps1", "smp%s1", &pmic5_hfsmps510, "vdd-s1"),
+ RPMH_VREG("smps2", "smp%s2", &pmic5_ftsmps520, "vdd-s2"),
+ RPMH_VREG("smps3", "smp%s3", &pmic5_ftsmps520, "vdd-s3"),
+ RPMH_VREG("smps4", "smp%s4", &pmic5_ftsmps520, "vdd-s4"),
+ RPMH_VREG("smps5", "smp%s5", &pmic5_ftsmps520, "vdd-s5"),
+ RPMH_VREG("smps6", "smp%s6", &pmic5_ftsmps520, "vdd-s6"),
+ RPMH_VREG("smps7", "smp%s7", &pmic5_ftsmps520, "vdd-s7"),
+ RPMH_VREG("smps8", "smp%s8", &pmic5_hfsmps510, "vdd-s8"),
+ RPMH_VREG("ldo1", "ldo%s1", &pmic5_nldo, "vdd-l1-l4-l12-l15"),
+ RPMH_VREG("ldo2", "ldo%s2", &pmic5_pldo, "vdd-l2-l7"),
+ RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo, "vdd-l3"),
+ RPMH_VREG("ldo4", "ldo%s4", &pmic5_nldo, "vdd-l1-l4-l12-l15"),
+ RPMH_VREG("ldo5", "ldo%s5", &pmic5_nldo, "vdd-l5"),
+ RPMH_VREG("ldo6", "ldo%s6", &pmic5_nldo, "vdd-l6-l9-l10"),
+ RPMH_VREG("ldo7", "ldo%s7", &pmic5_pldo, "vdd-l2-l7"),
+ RPMH_VREG("ldo8", "ldo%s8", &pmic5_nldo, "vdd-l8"),
+ RPMH_VREG("ldo9", "ldo%s9", &pmic5_nldo, "vdd-l6-l9-l10"),
+ RPMH_VREG("ldo10", "ldo%s10", &pmic5_nldo, "vdd-l6-l9-l10"),
+ RPMH_VREG("ldo11", "ldo%s11", &pmic5_pldo_lv, "vdd-l11-l17-l18-l19"),
+ RPMH_VREG("ldo12", "ldo%s12", &pmic5_nldo, "vdd-l1-l4-l12-l15"),
+ RPMH_VREG("ldo13", "ldo%s13", &pmic5_nldo, "vdd-l13"),
+ RPMH_VREG("ldo14", "ldo%s14", &pmic5_nldo, "vdd-l14-l16"),
+ RPMH_VREG("ldo15", "ldo%s15", &pmic5_nldo, "vdd-l1-l4-l12-l15"),
+ RPMH_VREG("ldo16", "ldo%s16", &pmic5_nldo, "vdd-l14-l16"),
+ RPMH_VREG("ldo17", "ldo%s17", &pmic5_pldo_lv, "vdd-l11-l17-l18-l19"),
+ RPMH_VREG("ldo18", "ldo%s18", &pmic5_pldo_lv, "vdd-l11-l17-l18-l19"),
+ RPMH_VREG("ldo19", "ldo%s19", &pmic5_pldo_lv, "vdd-l11-l17-l18-l19"),
+};
+
+static const struct rpmh_vreg_init_data pmr735a_vreg_data[] = {
+ RPMH_VREG("smps1", "smp%s1", &pmic5_ftsmps520, "vdd-s1"),
+ RPMH_VREG("smps2", "smp%s2", &pmic5_ftsmps520, "vdd-s2"),
+ RPMH_VREG("smps3", "smp%s3", &pmic5_hfsmps510, "vdd-s3"),
+ RPMH_VREG("ldo1", "ldo%s1", &pmic5_nldo, "vdd-l1-l2"),
+ RPMH_VREG("ldo2", "ldo%s2", &pmic5_nldo, "vdd-l1-l2"),
+ RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo, "vdd-l3"),
+ RPMH_VREG("ldo4", "ldo%s4", &pmic5_pldo_lv, "vdd-l4"),
+ RPMH_VREG("ldo5", "ldo%s5", &pmic5_nldo, "vdd-l5-l6"),
+ RPMH_VREG("ldo6", "ldo%s6", &pmic5_nldo, "vdd-l5-l6"),
+ RPMH_VREG("ldo7", "ldo%s7", &pmic5_pldo, "vdd-l7-bob"),
+};
+
static int rpmh_regulator_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -1136,6 +1179,14 @@ static const struct of_device_id __maybe_unused rpmh_regulator_match_table[] = {
.compatible = "qcom,pmx55-rpmh-regulators",
.data = pmx55_vreg_data,
},
+ {
+ .compatible = "qcom,pm7325-rpmh-regulators",
+ .data = pm7325_vreg_data,
+ },
+ {
+ .compatible = "qcom,pmr735a-rpmh-regulators",
+ .data = pmr735a_vreg_data,
+ },
{}
};
MODULE_DEVICE_TABLE(of, rpmh_regulator_match_table);
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
next prev parent reply other threads:[~2021-03-31 12:07 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-31 12:05 [PATCH V3 0/5] Add PM7325/PM8350C/PMR735A regulator support satya priya
2021-03-31 12:05 ` [PATCH V3 1/5] regulator: qcom-rpmh: Add pmic5_ftsmps520 buck satya priya
2021-03-31 12:05 ` satya priya [this message]
2021-03-31 18:10 ` [PATCH V3 2/5] regulator: qcom-rpmh: Add PM7325/PMR735A regulator support Matthias Kaehlcke
2021-03-31 12:05 ` [PATCH V3 3/5] arm64: dts: qcom: sc7280: Add RPMh regulators for sc7280-idp satya priya
2021-03-31 18:30 ` Matthias Kaehlcke
2021-03-31 12:05 ` [PATCH V3 4/5] dt-bindings: regulator: Convert RPMh regulator bindings to YAML satya priya
2021-03-31 12:18 ` Mark Brown
2021-04-01 16:56 ` Rob Herring
2021-03-31 12:05 ` [PATCH V3 5/5] dt-bindings: regulator: Add compatibles for PM7325/PMR735A satya priya
2021-04-01 20:43 ` [PATCH V3 0/5] Add PM7325/PM8350C/PMR735A regulator support Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1617192339-3760-3-git-send-email-skakit@codeaurora.org \
--to=skakit@codeaurora.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kgunda@codeaurora.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=rnayak@codeaurora.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.