From: Muneendra <muneendra.kumar@broadcom.com> To: linux-block@vger.kernel.org, linux-scsi@vger.kernel.org, tj@kernel.org, linux-nvme@lists.infradead.org, hare@suse.de Cc: jsmart2021@gmail.com, emilne@redhat.com, mkumar@redhat.com, Gaurav Srivastava <gaurav.srivastava@broadcom.com> Subject: [PATCH v9 05/13] lpfc: vmid: VMID params initialization Date: Wed, 7 Apr 2021 04:36:29 +0530 [thread overview] Message-ID: <1617750397-26466-6-git-send-email-muneendra.kumar@broadcom.com> (raw) In-Reply-To: <1617750397-26466-1-git-send-email-muneendra.kumar@broadcom.com> From: Gaurav Srivastava <gaurav.srivastava@broadcom.com> This patch initializes the VMID parameters like the type of vmid, max number of vmids supported and timeout value for the vmid registration based on the user input. Signed-off-by: Gaurav Srivastava <gaurav.srivastava@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> --- v9: updated comments v8: No change v7: No change v6: No change v5: No change v4: No change v3: No change v2: Ported the patch on top of 5.10/scsi-queue --- drivers/scsi/lpfc/lpfc_attr.c | 48 +++++++++++++++++++++++++++++++++++ 1 file changed, 48 insertions(+) diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 8b4c42016865..251b45fdb3bc 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -6150,6 +6150,45 @@ LPFC_ATTR_RW(enable_dpp, 1, 0, 1, "Enable Direct Packet Push"); */ LPFC_ATTR_R(enable_mi, 1, 0, 1, "Enable MI"); +/* + * lpfc_max_vmid: Maximum number of VMs to be tagged. This is valid only if + * either vmid_app_header or vmid_priority_tagging is enabled. + * 4 - 255 = vmid support enabled for 4-255 VMs + * Value range is [4,255]. + */ +LPFC_ATTR_RW(max_vmid, LPFC_MIN_VMID, LPFC_MIN_VMID, LPFC_MAX_VMID, + "Maximum number of VMs supported"); + +/* + * lpfc_vmid_inactivity_timeout: Inactivity timeout duration in hours + * 0 = Timeout is disabled + * Value range is [0,24]. + */ +LPFC_ATTR_RW(vmid_inactivity_timeout, 4, 0, 24, + "Inactivity timeout in hours"); + +/* + * lpfc_vmid_app_header: Enable App Header VMID support + * 0 = Support is disabled (default) + * 1 = Support is enabled + * Value range is [0,1]. + */ +LPFC_ATTR_RW(vmid_app_header, LPFC_VMID_APP_HEADER_DISABLE, + LPFC_VMID_APP_HEADER_DISABLE, LPFC_VMID_APP_HEADER_ENABLE, + "Enable App Header VMID support"); + +/* + * lpfc_vmid_priority_tagging: Enable Priority Tagging VMID support + * 0 = Support is disabled (default) + * 1 = Allow supported targets only + * 2 = Allow all targets + * Value range is [0,2]. + */ +LPFC_ATTR_RW(vmid_priority_tagging, LPFC_VMID_PRIO_TAG_DISABLE, + LPFC_VMID_PRIO_TAG_DISABLE, + LPFC_VMID_PRIO_TAG_ALL_TARGETS, + "Enable Priority Tagging VMID support"); + struct device_attribute *lpfc_hba_attrs[] = { &dev_attr_nvme_info, &dev_attr_scsi_stat, @@ -6268,6 +6307,10 @@ struct device_attribute *lpfc_hba_attrs[] = { &dev_attr_lpfc_enable_bbcr, &dev_attr_lpfc_enable_dpp, &dev_attr_lpfc_enable_mi, + &dev_attr_lpfc_max_vmid, + &dev_attr_lpfc_vmid_inactivity_timeout, + &dev_attr_lpfc_vmid_app_header, + &dev_attr_lpfc_vmid_priority_tagging, NULL, }; @@ -7327,6 +7370,11 @@ lpfc_get_cfgparam(struct lpfc_hba *phba) lpfc_enable_hba_heartbeat_init(phba, lpfc_enable_hba_heartbeat); lpfc_EnableXLane_init(phba, lpfc_EnableXLane); + /* VMID Inits */ + lpfc_max_vmid_init(phba, lpfc_max_vmid); + lpfc_vmid_inactivity_timeout_init(phba, lpfc_vmid_inactivity_timeout); + lpfc_vmid_app_header_init(phba, lpfc_vmid_app_header); + lpfc_vmid_priority_tagging_init(phba, lpfc_vmid_priority_tagging); if (phba->sli_rev != LPFC_SLI_REV4) phba->cfg_EnableXLane = 0; lpfc_XLanePriority_init(phba, lpfc_XLanePriority); -- 2.26.2
WARNING: multiple messages have this Message-ID (diff)
From: Muneendra <muneendra.kumar@broadcom.com> To: linux-block@vger.kernel.org, linux-scsi@vger.kernel.org, tj@kernel.org, linux-nvme@lists.infradead.org, hare@suse.de Cc: jsmart2021@gmail.com, emilne@redhat.com, mkumar@redhat.com, Gaurav Srivastava <gaurav.srivastava@broadcom.com> Subject: [PATCH v9 05/13] lpfc: vmid: VMID params initialization Date: Wed, 7 Apr 2021 04:36:29 +0530 [thread overview] Message-ID: <1617750397-26466-6-git-send-email-muneendra.kumar@broadcom.com> (raw) In-Reply-To: <1617750397-26466-1-git-send-email-muneendra.kumar@broadcom.com> From: Gaurav Srivastava <gaurav.srivastava@broadcom.com> This patch initializes the VMID parameters like the type of vmid, max number of vmids supported and timeout value for the vmid registration based on the user input. Signed-off-by: Gaurav Srivastava <gaurav.srivastava@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> --- v9: updated comments v8: No change v7: No change v6: No change v5: No change v4: No change v3: No change v2: Ported the patch on top of 5.10/scsi-queue --- drivers/scsi/lpfc/lpfc_attr.c | 48 +++++++++++++++++++++++++++++++++++ 1 file changed, 48 insertions(+) diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 8b4c42016865..251b45fdb3bc 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -6150,6 +6150,45 @@ LPFC_ATTR_RW(enable_dpp, 1, 0, 1, "Enable Direct Packet Push"); */ LPFC_ATTR_R(enable_mi, 1, 0, 1, "Enable MI"); +/* + * lpfc_max_vmid: Maximum number of VMs to be tagged. This is valid only if + * either vmid_app_header or vmid_priority_tagging is enabled. + * 4 - 255 = vmid support enabled for 4-255 VMs + * Value range is [4,255]. + */ +LPFC_ATTR_RW(max_vmid, LPFC_MIN_VMID, LPFC_MIN_VMID, LPFC_MAX_VMID, + "Maximum number of VMs supported"); + +/* + * lpfc_vmid_inactivity_timeout: Inactivity timeout duration in hours + * 0 = Timeout is disabled + * Value range is [0,24]. + */ +LPFC_ATTR_RW(vmid_inactivity_timeout, 4, 0, 24, + "Inactivity timeout in hours"); + +/* + * lpfc_vmid_app_header: Enable App Header VMID support + * 0 = Support is disabled (default) + * 1 = Support is enabled + * Value range is [0,1]. + */ +LPFC_ATTR_RW(vmid_app_header, LPFC_VMID_APP_HEADER_DISABLE, + LPFC_VMID_APP_HEADER_DISABLE, LPFC_VMID_APP_HEADER_ENABLE, + "Enable App Header VMID support"); + +/* + * lpfc_vmid_priority_tagging: Enable Priority Tagging VMID support + * 0 = Support is disabled (default) + * 1 = Allow supported targets only + * 2 = Allow all targets + * Value range is [0,2]. + */ +LPFC_ATTR_RW(vmid_priority_tagging, LPFC_VMID_PRIO_TAG_DISABLE, + LPFC_VMID_PRIO_TAG_DISABLE, + LPFC_VMID_PRIO_TAG_ALL_TARGETS, + "Enable Priority Tagging VMID support"); + struct device_attribute *lpfc_hba_attrs[] = { &dev_attr_nvme_info, &dev_attr_scsi_stat, @@ -6268,6 +6307,10 @@ struct device_attribute *lpfc_hba_attrs[] = { &dev_attr_lpfc_enable_bbcr, &dev_attr_lpfc_enable_dpp, &dev_attr_lpfc_enable_mi, + &dev_attr_lpfc_max_vmid, + &dev_attr_lpfc_vmid_inactivity_timeout, + &dev_attr_lpfc_vmid_app_header, + &dev_attr_lpfc_vmid_priority_tagging, NULL, }; @@ -7327,6 +7370,11 @@ lpfc_get_cfgparam(struct lpfc_hba *phba) lpfc_enable_hba_heartbeat_init(phba, lpfc_enable_hba_heartbeat); lpfc_EnableXLane_init(phba, lpfc_EnableXLane); + /* VMID Inits */ + lpfc_max_vmid_init(phba, lpfc_max_vmid); + lpfc_vmid_inactivity_timeout_init(phba, lpfc_vmid_inactivity_timeout); + lpfc_vmid_app_header_init(phba, lpfc_vmid_app_header); + lpfc_vmid_priority_tagging_init(phba, lpfc_vmid_priority_tagging); if (phba->sli_rev != LPFC_SLI_REV4) phba->cfg_EnableXLane = 0; lpfc_XLanePriority_init(phba, lpfc_XLanePriority); -- 2.26.2 _______________________________________________ Linux-nvme mailing list Linux-nvme@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-nvme
next prev parent reply other threads:[~2021-04-07 5:59 UTC|newest] Thread overview: 68+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-04-06 23:06 [PATCH v9 00/13] blkcg:Support to track FC storage blk io traffic Muneendra 2021-04-06 23:06 ` Muneendra 2021-04-06 23:06 ` [PATCH v9 01/13] cgroup: Added cgroup_get_from_id Muneendra 2021-04-06 23:06 ` Muneendra 2021-04-08 8:26 ` Hannes Reinecke 2021-04-08 8:26 ` Hannes Reinecke 2021-04-06 23:06 ` [PATCH v9 02/13] blkcg: Added a app identifier support for blkcg Muneendra 2021-04-06 23:06 ` Muneendra 2021-04-08 8:26 ` Hannes Reinecke 2021-04-08 8:26 ` Hannes Reinecke 2021-04-06 23:06 ` [PATCH v9 03/13] nvme: Added a newsysfs attribute appid_store Muneendra 2021-04-06 23:06 ` Muneendra 2021-04-18 15:32 ` Benjamin Block 2021-04-18 15:32 ` Benjamin Block 2021-04-20 6:54 ` Muneendra Kumar M 2021-04-20 6:54 ` Muneendra Kumar M 2021-04-20 11:09 ` Benjamin Block 2021-04-20 11:09 ` Benjamin Block 2021-04-22 23:29 ` James Smart 2021-04-22 23:29 ` James Smart 2021-04-23 10:14 ` Benjamin Block 2021-04-23 10:14 ` Benjamin Block 2021-04-06 23:06 ` [PATCH v9 04/13] lpfc: vmid: Add the datastructure for supporting VMID in lpfc Muneendra 2021-04-06 23:06 ` Muneendra 2021-04-08 8:28 ` Hannes Reinecke 2021-04-08 8:28 ` Hannes Reinecke 2021-04-06 23:06 ` Muneendra [this message] 2021-04-06 23:06 ` [PATCH v9 05/13] lpfc: vmid: VMID params initialization Muneendra 2021-04-08 8:29 ` Hannes Reinecke 2021-04-08 8:29 ` Hannes Reinecke 2021-04-06 23:06 ` [PATCH v9 06/13] lpfc: vmid: Add support for vmid in mailbox command, does vmid resource allocation and vmid cleanup Muneendra 2021-04-06 23:06 ` Muneendra 2021-04-08 8:32 ` Hannes Reinecke 2021-04-08 8:32 ` Hannes Reinecke 2021-04-06 23:06 ` [PATCH v9 07/13] lpfc: vmid: Implements ELS commands for appid patch Muneendra 2021-04-06 23:06 ` Muneendra 2021-04-08 8:34 ` Hannes Reinecke 2021-04-08 8:34 ` Hannes Reinecke 2021-04-20 12:38 ` Benjamin Block 2021-04-20 12:38 ` Benjamin Block 2021-04-21 22:55 ` James Smart 2021-04-21 22:55 ` James Smart 2021-04-22 9:28 ` Benjamin Block 2021-04-22 9:28 ` Benjamin Block 2021-04-06 23:06 ` [PATCH v9 08/13] lpfc: vmid: Functions to manage vmids Muneendra 2021-04-06 23:06 ` Muneendra 2021-04-08 8:35 ` Hannes Reinecke 2021-04-08 8:35 ` Hannes Reinecke 2021-04-06 23:06 ` [PATCH v9 09/13] lpfc: vmid: Implements CT commands for appid Muneendra 2021-04-06 23:06 ` Muneendra 2021-04-08 8:37 ` Hannes Reinecke 2021-04-08 8:37 ` Hannes Reinecke 2021-04-06 23:06 ` [PATCH v9 10/13] lpfc: vmid: Appends the vmid in the wqe before sending Muneendra 2021-04-06 23:06 ` Muneendra 2021-04-06 23:06 ` [PATCH v9 11/13] lpfc: vmid: Timeout implementation for vmid Muneendra 2021-04-06 23:06 ` Muneendra 2021-04-08 8:38 ` Hannes Reinecke 2021-04-08 8:38 ` Hannes Reinecke 2021-04-06 23:06 ` [PATCH v9 12/13] lpfc: vmid: Adding qfpa and vmid timeout check in worker thread Muneendra 2021-04-06 23:06 ` Muneendra 2021-04-06 23:06 ` [PATCH v9 13/13] lpfc: vmid: Introducing vmid in io path Muneendra 2021-04-06 23:06 ` Muneendra 2021-04-08 8:46 ` Hannes Reinecke 2021-04-08 8:46 ` Hannes Reinecke 2021-04-10 15:00 ` James Smart 2021-04-10 15:00 ` James Smart 2021-04-12 5:27 ` Hannes Reinecke 2021-04-12 5:27 ` Hannes Reinecke
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1617750397-26466-6-git-send-email-muneendra.kumar@broadcom.com \ --to=muneendra.kumar@broadcom.com \ --cc=emilne@redhat.com \ --cc=gaurav.srivastava@broadcom.com \ --cc=hare@suse.de \ --cc=jsmart2021@gmail.com \ --cc=linux-block@vger.kernel.org \ --cc=linux-nvme@lists.infradead.org \ --cc=linux-scsi@vger.kernel.org \ --cc=mkumar@redhat.com \ --cc=tj@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.