From: dillon.minfei@gmail.com
To: krzysztof.kozlowski@canonical.com, robh+dt@kernel.org,
shawnguo@kernel.org, krzk@kernel.org, linux@rempel-privat.de,
s.riedmueller@phytec.de, matthias.schiffer@ew.tq-group.com,
leoyang.li@nxp.com, arnd@arndb.de, olof@lixom.net,
s.hauer@pengutronix.de, kernel@pengutronix.de,
festevam@gmail.com, prabhakar.csengg@gmail.com,
mchehab@kernel.org
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-imx@nxp.com,
linux-media@vger.kernel.org, dillon min <dillon.minfei@gmail.com>
Subject: [PATCH v3 0/4] arm: imx: Add i.mx6q DaSheng COM-9XX SBC board support
Date: Thu, 15 Apr 2021 12:05:31 +0800 [thread overview]
Message-ID: <1618459535-8141-1-git-send-email-dillon.minfei@gmail.com> (raw)
From: dillon min <dillon.minfei@gmail.com>
This patchset aims to add kernel support on DaSheng COM-8XX SBC board
optimize ov2659 driver to handle xvclk on/off at proper stage to save power
changes based on master branch, since commit id:
89698becf06d341a700913c3d89ce2a914af69a2
The DaSheng Com-9xx is and ARM based signle board computer (SBC)
featuring:
- i.MX6Q
- 2GiB LPDDR3 DRAM
- 8GiB eMMC 5.0 FLASH
- 4MiB SPI Flash
- USB 2.0 Host/Device
- Multiple multi-protocol RS232/RS485 Serial ports
- microSD socket
- 5V DC power input
- HDMI1.4a,1080p@60
- RGMIIx1 Gigabit Ethernet
- CSI0x1, connect with ov2659
---
v3:
- optimize commit message for patch v3 ov2659 part
- move 'imx6q-ds.dtb' after 'imx6q-dms-ba16.dtb' to follow the alphabetical order
(arch/arm/boot/dts/Makefile)
- move 'ds,imx6q-sbc' after 'dmo,imx6q-edmqmx6' to follow the alphabetical
order. (Documentation/devicetree/bindings/arm/fsl.yaml)
- move v2 patch 4 to v3 patch 1
- add 'Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>'
for [PATCH v3 1/4]
- v2 link:
https://lore.kernel.org/linux-arm-kernel/1618383117-17179-1-git-send-email-dillon.minfei@gmail.com/T/#md2dc86ac665ed7f10cffe4909825b97608805d3f
v2:
- add "[PATCH v2 4/4] dt-bindings: add dasheng vendor prefix" to fix
checkpatch.pl warning.
dillon min (4):
dt-bindings: add dasheng vendor prefix
dt-bindings: arm: imx: Add i.mx6q DaSheng COM-9XX SBC
arm: dts: imx: Add i.mx6q DaSheng COM-9XX SBC board support
media: i2c: ov2659: Use clk_{prepare_enable,disable_unprepare}() to
set xvclk on/off
Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx6q-ds.dts | 17 +
arch/arm/boot/dts/imx6qdl-ds.dtsi | 465 +++++++++++++++++++++
drivers/media/i2c/ov2659.c | 24 +-
6 files changed, 504 insertions(+), 6 deletions(-)
create mode 100644 arch/arm/boot/dts/imx6q-ds.dts
create mode 100644 arch/arm/boot/dts/imx6qdl-ds.dtsi
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: dillon.minfei@gmail.com
To: krzysztof.kozlowski@canonical.com, robh+dt@kernel.org,
shawnguo@kernel.org, krzk@kernel.org, linux@rempel-privat.de,
s.riedmueller@phytec.de, matthias.schiffer@ew.tq-group.com,
leoyang.li@nxp.com, arnd@arndb.de, olof@lixom.net,
s.hauer@pengutronix.de, kernel@pengutronix.de,
festevam@gmail.com, prabhakar.csengg@gmail.com,
mchehab@kernel.org
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-imx@nxp.com,
linux-media@vger.kernel.org, dillon min <dillon.minfei@gmail.com>
Subject: [PATCH v3 0/4] arm: imx: Add i.mx6q DaSheng COM-9XX SBC board support
Date: Thu, 15 Apr 2021 12:05:31 +0800 [thread overview]
Message-ID: <1618459535-8141-1-git-send-email-dillon.minfei@gmail.com> (raw)
From: dillon min <dillon.minfei@gmail.com>
This patchset aims to add kernel support on DaSheng COM-8XX SBC board
optimize ov2659 driver to handle xvclk on/off at proper stage to save power
changes based on master branch, since commit id:
89698becf06d341a700913c3d89ce2a914af69a2
The DaSheng Com-9xx is and ARM based signle board computer (SBC)
featuring:
- i.MX6Q
- 2GiB LPDDR3 DRAM
- 8GiB eMMC 5.0 FLASH
- 4MiB SPI Flash
- USB 2.0 Host/Device
- Multiple multi-protocol RS232/RS485 Serial ports
- microSD socket
- 5V DC power input
- HDMI1.4a,1080p@60
- RGMIIx1 Gigabit Ethernet
- CSI0x1, connect with ov2659
---
v3:
- optimize commit message for patch v3 ov2659 part
- move 'imx6q-ds.dtb' after 'imx6q-dms-ba16.dtb' to follow the alphabetical order
(arch/arm/boot/dts/Makefile)
- move 'ds,imx6q-sbc' after 'dmo,imx6q-edmqmx6' to follow the alphabetical
order. (Documentation/devicetree/bindings/arm/fsl.yaml)
- move v2 patch 4 to v3 patch 1
- add 'Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>'
for [PATCH v3 1/4]
- v2 link:
https://lore.kernel.org/linux-arm-kernel/1618383117-17179-1-git-send-email-dillon.minfei@gmail.com/T/#md2dc86ac665ed7f10cffe4909825b97608805d3f
v2:
- add "[PATCH v2 4/4] dt-bindings: add dasheng vendor prefix" to fix
checkpatch.pl warning.
dillon min (4):
dt-bindings: add dasheng vendor prefix
dt-bindings: arm: imx: Add i.mx6q DaSheng COM-9XX SBC
arm: dts: imx: Add i.mx6q DaSheng COM-9XX SBC board support
media: i2c: ov2659: Use clk_{prepare_enable,disable_unprepare}() to
set xvclk on/off
Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx6q-ds.dts | 17 +
arch/arm/boot/dts/imx6qdl-ds.dtsi | 465 +++++++++++++++++++++
drivers/media/i2c/ov2659.c | 24 +-
6 files changed, 504 insertions(+), 6 deletions(-)
create mode 100644 arch/arm/boot/dts/imx6q-ds.dts
create mode 100644 arch/arm/boot/dts/imx6qdl-ds.dtsi
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2021-04-15 4:05 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-15 4:05 dillon.minfei [this message]
2021-04-15 4:05 ` [PATCH v3 0/4] arm: imx: Add i.mx6q DaSheng COM-9XX SBC board support dillon.minfei
2021-04-15 4:05 ` [PATCH v3 1/4] dt-bindings: add dasheng vendor prefix dillon.minfei
2021-04-15 4:05 ` dillon.minfei
2021-04-15 20:37 ` Rob Herring
2021-04-15 20:37 ` Rob Herring
2021-04-15 4:05 ` [PATCH v3 2/4] dt-bindings: arm: imx: Add i.mx6q DaSheng COM-9XX SBC dillon.minfei
2021-04-15 4:05 ` dillon.minfei
2021-04-15 6:29 ` Krzysztof Kozlowski
2021-04-15 6:29 ` Krzysztof Kozlowski
2021-04-15 20:37 ` Rob Herring
2021-04-15 20:37 ` Rob Herring
2021-04-15 4:05 ` [PATCH v3 3/4] arm: dts: imx: Add i.mx6q DaSheng COM-9XX SBC board support dillon.minfei
2021-04-15 4:05 ` dillon.minfei
2021-04-20 6:43 ` dillon min
2021-04-20 6:43 ` dillon min
2021-04-20 14:27 ` Fabio Estevam
2021-04-20 14:27 ` Fabio Estevam
2021-04-21 3:40 ` dillon min
2021-04-21 3:40 ` dillon min
2021-04-15 4:05 ` [PATCH v3 4/4] media: i2c: ov2659: Use clk_{prepare_enable,disable_unprepare}() to set xvclk on/off dillon.minfei
2021-04-15 4:05 ` [PATCH v3 4/4] media: i2c: ov2659: Use clk_{prepare_enable, disable_unprepare}() " dillon.minfei
2021-04-20 6:45 ` [PATCH v3 4/4] media: i2c: ov2659: Use clk_{prepare_enable,disable_unprepare}() " dillon min
2021-04-20 6:45 ` [PATCH v3 4/4] media: i2c: ov2659: Use clk_{prepare_enable, disable_unprepare}() " dillon min
2021-04-20 6:52 ` [PATCH v3 4/4] media: i2c: ov2659: Use clk_{prepare_enable,disable_unprepare}() " Krzysztof Kozlowski
2021-04-20 6:52 ` [PATCH v3 4/4] media: i2c: ov2659: Use clk_{prepare_enable, disable_unprepare}() " Krzysztof Kozlowski
2021-04-20 7:02 ` [PATCH v3 4/4] media: i2c: ov2659: Use clk_{prepare_enable,disable_unprepare}() " dillon min
2021-04-20 7:02 ` [PATCH v3 4/4] media: i2c: ov2659: Use clk_{prepare_enable, disable_unprepare}() " dillon min
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1618459535-8141-1-git-send-email-dillon.minfei@gmail.com \
--to=dillon.minfei@gmail.com \
--cc=arnd@arndb.de \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=krzk@kernel.org \
--cc=krzysztof.kozlowski@canonical.com \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux@rempel-privat.de \
--cc=matthias.schiffer@ew.tq-group.com \
--cc=mchehab@kernel.org \
--cc=olof@lixom.net \
--cc=prabhakar.csengg@gmail.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=s.riedmueller@phytec.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.