From: Chunfeng Yun <chunfeng.yun@mediatek.com>
To: Vinod Koul <vkoul@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Chun-Kuang Hu <chunkuang.hu@kernel.org>
Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>,
Kishon Vijay Abraham I <kishon@ti.com>,
Philipp Zabel <p.zabel@pengutronix.de>,
Matthias Brugger <matthias.bgg@gmail.com>,
<linux-arm-kernel@lists.infradead.org>,
<linux-mediatek@lists.infradead.org>,
<linux-phy@lists.infradead.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <dri-devel@lists.freedesktop.org>,
Eddie Hung <eddie.hung@mediatek.com>
Subject: [PATCH 1/9] dt-bindings: phy: mediatek: tphy: support type switch by pericfg
Date: Wed, 28 Jul 2021 15:58:23 +0800 [thread overview]
Message-ID: <1627459111-2907-1-git-send-email-chunfeng.yun@mediatek.com> (raw)
Add support type switch by pericfg register between USB3, PCIe,
SATA, SGMII, this is used to replace the way through efuse or
jumper.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
.../devicetree/bindings/phy/mediatek,tphy.yaml | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
index 838852cb8527..9e6c0f43f1c6 100644
--- a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
+++ b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
@@ -201,6 +201,22 @@ patternProperties:
Specify the flag to enable BC1.2 if support it
type: boolean
+ mediatek,syscon-type:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ maxItems: 1
+ description:
+ A phandle to syscon used to access the register of type switch,
+ the field should always be 3 cells long.
+ items:
+ items:
+ - description:
+ The first cell represents a phandle to syscon
+ - description:
+ The second cell represents the register offset
+ - description:
+ The third cell represents the index of config segment
+ enum: [0, 1, 2, 3]
+
required:
- reg
- "#phy-cells"
--
2.18.0
WARNING: multiple messages have this Message-ID (diff)
From: Chunfeng Yun <chunfeng.yun@mediatek.com>
To: Vinod Koul <vkoul@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Chun-Kuang Hu <chunkuang.hu@kernel.org>
Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>,
Kishon Vijay Abraham I <kishon@ti.com>,
Philipp Zabel <p.zabel@pengutronix.de>,
Matthias Brugger <matthias.bgg@gmail.com>,
<linux-arm-kernel@lists.infradead.org>,
<linux-mediatek@lists.infradead.org>,
<linux-phy@lists.infradead.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <dri-devel@lists.freedesktop.org>,
Eddie Hung <eddie.hung@mediatek.com>
Subject: [PATCH 1/9] dt-bindings: phy: mediatek: tphy: support type switch by pericfg
Date: Wed, 28 Jul 2021 15:58:23 +0800 [thread overview]
Message-ID: <1627459111-2907-1-git-send-email-chunfeng.yun@mediatek.com> (raw)
Add support type switch by pericfg register between USB3, PCIe,
SATA, SGMII, this is used to replace the way through efuse or
jumper.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
.../devicetree/bindings/phy/mediatek,tphy.yaml | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
index 838852cb8527..9e6c0f43f1c6 100644
--- a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
+++ b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
@@ -201,6 +201,22 @@ patternProperties:
Specify the flag to enable BC1.2 if support it
type: boolean
+ mediatek,syscon-type:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ maxItems: 1
+ description:
+ A phandle to syscon used to access the register of type switch,
+ the field should always be 3 cells long.
+ items:
+ items:
+ - description:
+ The first cell represents a phandle to syscon
+ - description:
+ The second cell represents the register offset
+ - description:
+ The third cell represents the index of config segment
+ enum: [0, 1, 2, 3]
+
required:
- reg
- "#phy-cells"
--
2.18.0
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
WARNING: multiple messages have this Message-ID (diff)
From: Chunfeng Yun <chunfeng.yun@mediatek.com>
To: Vinod Koul <vkoul@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Chun-Kuang Hu <chunkuang.hu@kernel.org>
Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>,
Kishon Vijay Abraham I <kishon@ti.com>,
Philipp Zabel <p.zabel@pengutronix.de>,
Matthias Brugger <matthias.bgg@gmail.com>,
<linux-arm-kernel@lists.infradead.org>,
<linux-mediatek@lists.infradead.org>,
<linux-phy@lists.infradead.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <dri-devel@lists.freedesktop.org>,
Eddie Hung <eddie.hung@mediatek.com>
Subject: [PATCH 1/9] dt-bindings: phy: mediatek: tphy: support type switch by pericfg
Date: Wed, 28 Jul 2021 15:58:23 +0800 [thread overview]
Message-ID: <1627459111-2907-1-git-send-email-chunfeng.yun@mediatek.com> (raw)
Add support type switch by pericfg register between USB3, PCIe,
SATA, SGMII, this is used to replace the way through efuse or
jumper.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
.../devicetree/bindings/phy/mediatek,tphy.yaml | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
index 838852cb8527..9e6c0f43f1c6 100644
--- a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
+++ b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
@@ -201,6 +201,22 @@ patternProperties:
Specify the flag to enable BC1.2 if support it
type: boolean
+ mediatek,syscon-type:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ maxItems: 1
+ description:
+ A phandle to syscon used to access the register of type switch,
+ the field should always be 3 cells long.
+ items:
+ items:
+ - description:
+ The first cell represents a phandle to syscon
+ - description:
+ The second cell represents the register offset
+ - description:
+ The third cell represents the index of config segment
+ enum: [0, 1, 2, 3]
+
required:
- reg
- "#phy-cells"
--
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Chunfeng Yun <chunfeng.yun@mediatek.com>
To: Vinod Koul <vkoul@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Chun-Kuang Hu <chunkuang.hu@kernel.org>
Cc: devicetree@vger.kernel.org, Eddie Hung <eddie.hung@mediatek.com>,
linux-kernel@vger.kernel.org, linux-phy@lists.infradead.org,
Kishon Vijay Abraham I <kishon@ti.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
linux-mediatek@lists.infradead.org,
dri-devel@lists.freedesktop.org,
Chunfeng Yun <chunfeng.yun@mediatek.com>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/9] dt-bindings: phy: mediatek: tphy: support type switch by pericfg
Date: Wed, 28 Jul 2021 15:58:23 +0800 [thread overview]
Message-ID: <1627459111-2907-1-git-send-email-chunfeng.yun@mediatek.com> (raw)
Add support type switch by pericfg register between USB3, PCIe,
SATA, SGMII, this is used to replace the way through efuse or
jumper.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
.../devicetree/bindings/phy/mediatek,tphy.yaml | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
index 838852cb8527..9e6c0f43f1c6 100644
--- a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
+++ b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
@@ -201,6 +201,22 @@ patternProperties:
Specify the flag to enable BC1.2 if support it
type: boolean
+ mediatek,syscon-type:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ maxItems: 1
+ description:
+ A phandle to syscon used to access the register of type switch,
+ the field should always be 3 cells long.
+ items:
+ items:
+ - description:
+ The first cell represents a phandle to syscon
+ - description:
+ The second cell represents the register offset
+ - description:
+ The third cell represents the index of config segment
+ enum: [0, 1, 2, 3]
+
required:
- reg
- "#phy-cells"
--
2.18.0
WARNING: multiple messages have this Message-ID (diff)
From: Chunfeng Yun <chunfeng.yun@mediatek.com>
To: Vinod Koul <vkoul@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Chun-Kuang Hu <chunkuang.hu@kernel.org>
Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>,
Kishon Vijay Abraham I <kishon@ti.com>,
Philipp Zabel <p.zabel@pengutronix.de>,
Matthias Brugger <matthias.bgg@gmail.com>,
<linux-arm-kernel@lists.infradead.org>,
<linux-mediatek@lists.infradead.org>,
<linux-phy@lists.infradead.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <dri-devel@lists.freedesktop.org>,
Eddie Hung <eddie.hung@mediatek.com>
Subject: [PATCH 1/9] dt-bindings: phy: mediatek: tphy: support type switch by pericfg
Date: Wed, 28 Jul 2021 15:58:23 +0800 [thread overview]
Message-ID: <1627459111-2907-1-git-send-email-chunfeng.yun@mediatek.com> (raw)
Add support type switch by pericfg register between USB3, PCIe,
SATA, SGMII, this is used to replace the way through efuse or
jumper.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
.../devicetree/bindings/phy/mediatek,tphy.yaml | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
index 838852cb8527..9e6c0f43f1c6 100644
--- a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
+++ b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
@@ -201,6 +201,22 @@ patternProperties:
Specify the flag to enable BC1.2 if support it
type: boolean
+ mediatek,syscon-type:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ maxItems: 1
+ description:
+ A phandle to syscon used to access the register of type switch,
+ the field should always be 3 cells long.
+ items:
+ items:
+ - description:
+ The first cell represents a phandle to syscon
+ - description:
+ The second cell represents the register offset
+ - description:
+ The third cell represents the index of config segment
+ enum: [0, 1, 2, 3]
+
required:
- reg
- "#phy-cells"
--
2.18.0
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
next reply other threads:[~2021-07-28 7:59 UTC|newest]
Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-28 7:58 Chunfeng Yun [this message]
2021-07-28 7:58 ` [PATCH 1/9] dt-bindings: phy: mediatek: tphy: support type switch by pericfg Chunfeng Yun
2021-07-28 7:58 ` Chunfeng Yun
2021-07-28 7:58 ` Chunfeng Yun
2021-07-28 7:58 ` Chunfeng Yun
2021-07-28 7:58 ` [PATCH 2/9] phy: phy-mtk-tphy: use clock bulk to get clocks Chunfeng Yun
2021-07-28 7:58 ` Chunfeng Yun
2021-07-28 7:58 ` Chunfeng Yun
2021-07-28 7:58 ` Chunfeng Yun
2021-07-28 7:58 ` Chunfeng Yun
2021-07-28 7:58 ` [PATCH 3/9] phy: phy-mtk-tphy: support type switch by pericfg Chunfeng Yun
2021-07-28 7:58 ` Chunfeng Yun
2021-07-28 7:58 ` Chunfeng Yun
2021-07-28 7:58 ` Chunfeng Yun
2021-07-28 7:58 ` Chunfeng Yun
2021-07-28 7:58 ` [PATCH 4/9] phy: phy-mtk-tphy: print error log using child device Chunfeng Yun
2021-07-28 7:58 ` Chunfeng Yun
2021-07-28 7:58 ` Chunfeng Yun
2021-07-28 7:58 ` Chunfeng Yun
2021-07-28 7:58 ` Chunfeng Yun
2021-07-28 7:58 ` [PATCH 5/9] phy: phy-mtk-tphy: remove error log of ioremap failure Chunfeng Yun
2021-07-28 7:58 ` Chunfeng Yun
2021-07-28 7:58 ` Chunfeng Yun
2021-07-28 7:58 ` Chunfeng Yun
2021-07-28 7:58 ` Chunfeng Yun
2021-07-28 7:58 ` [PATCH 6/9] phy: phy-mtk-ufs: use clock bulk to get clocks Chunfeng Yun
2021-07-28 7:58 ` Chunfeng Yun
2021-07-28 7:58 ` Chunfeng Yun
2021-07-28 7:58 ` Chunfeng Yun
2021-07-28 7:58 ` Chunfeng Yun
2021-07-28 7:58 ` [PATCH 7/9] phy: phy-mtk-hdmi: convert to devm_platform_ioremap_resource Chunfeng Yun
2021-07-28 7:58 ` Chunfeng Yun
2021-07-28 7:58 ` Chunfeng Yun
2021-07-28 7:58 ` Chunfeng Yun
2021-07-28 7:58 ` Chunfeng Yun
2021-07-30 16:23 ` Chun-Kuang Hu
2021-07-30 16:23 ` Chun-Kuang Hu
2021-07-30 16:23 ` Chun-Kuang Hu
2021-07-30 16:23 ` Chun-Kuang Hu
2021-07-30 16:23 ` Chun-Kuang Hu
2021-07-28 7:58 ` [PATCH 8/9] phy: phy-mtk-mipi-dsi: remove dummy assignment of error number Chunfeng Yun
2021-07-28 7:58 ` Chunfeng Yun
2021-07-28 7:58 ` Chunfeng Yun
2021-07-28 7:58 ` Chunfeng Yun
2021-07-28 7:58 ` Chunfeng Yun
2021-07-30 16:24 ` Chun-Kuang Hu
2021-07-30 16:24 ` Chun-Kuang Hu
2021-07-30 16:24 ` Chun-Kuang Hu
2021-07-30 16:24 ` Chun-Kuang Hu
2021-07-30 16:24 ` Chun-Kuang Hu
2021-07-28 7:58 ` [PATCH 9/9] phy: phy-mtk-mipi-dsi: convert to devm_platform_ioremap_resource Chunfeng Yun
2021-07-28 7:58 ` Chunfeng Yun
2021-07-28 7:58 ` Chunfeng Yun
2021-07-28 7:58 ` Chunfeng Yun
2021-07-28 7:58 ` Chunfeng Yun
2021-07-30 16:25 ` Chun-Kuang Hu
2021-07-30 16:25 ` Chun-Kuang Hu
2021-07-30 16:25 ` Chun-Kuang Hu
2021-07-30 16:25 ` Chun-Kuang Hu
2021-07-30 16:25 ` Chun-Kuang Hu
2021-08-02 21:33 ` [PATCH 1/9] dt-bindings: phy: mediatek: tphy: support type switch by pericfg Rob Herring
2021-08-02 21:33 ` Rob Herring
2021-08-02 21:33 ` Rob Herring
2021-08-02 21:33 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1627459111-2907-1-git-send-email-chunfeng.yun@mediatek.com \
--to=chunfeng.yun@mediatek.com \
--cc=chunkuang.hu@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=eddie.hung@mediatek.com \
--cc=kishon@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-phy@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=p.zabel@pengutronix.de \
--cc=robh+dt@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.