All of lore.kernel.org
 help / color / mirror / Atom feed
From: NeilBrown <neilb@suse.de>
To: "J. Bruce Fields" <bfields@fieldses.org>,
	Chuck Lever <chuck.lever@oracle.com>
Cc: linux-nfs@vger.kernel.org
Subject: [PATCH 12/19] lockd: move lockd_start_svc() call into lockd_create_svc()
Date: Tue, 23 Nov 2021 12:29:35 +1100	[thread overview]
Message-ID: <163763097548.7284.17750816308590904344.stgit@noble.brown> (raw)
In-Reply-To: <163763078330.7284.10141477742275086758.stgit@noble.brown>

lockd_start_svc() only needs to be called once, just after the svc is
created.  If the start fails, the svc is discarded too.

It thus makes sense to call lockd_start_svc() from lockd_create_svc().
This allows us to remove the test against nlmsvc_rqst at the start of
lockd_start_svc() - it must always be NULL.

lockd_up() only held an extra reference on the svc until a thread was
created - then it dropped it.  The thread - and thus the extra reference
- will remain until kthread_stop() is called.
Now that the thread is created in lockd_create_svc(), the extra
reference can be dropped there.  So the 'serv' variable is no longer
needed in lockd_up().

Signed-off-by: NeilBrown <neilb@suse.de>
---
 fs/lockd/svc.c |   22 ++++++++++------------
 1 file changed, 10 insertions(+), 12 deletions(-)

diff --git a/fs/lockd/svc.c b/fs/lockd/svc.c
index 20cebb191350..91e7c839841e 100644
--- a/fs/lockd/svc.c
+++ b/fs/lockd/svc.c
@@ -359,9 +359,6 @@ static int lockd_start_svc(struct svc_serv *serv)
 {
 	int error;
 
-	if (nlmsvc_rqst)
-		return 0;
-
 	/*
 	 * Create the kernel thread and wait for it to start.
 	 */
@@ -406,6 +403,7 @@ static const struct svc_serv_ops lockd_sv_ops = {
 static int lockd_create_svc(void)
 {
 	struct svc_serv *serv;
+	int error;
 
 	/*
 	 * Check whether we're already up and running.
@@ -432,6 +430,13 @@ static int lockd_create_svc(void)
 		printk(KERN_WARNING "lockd_up: create service failed\n");
 		return -ENOMEM;
 	}
+
+	error = lockd_start_svc(serv);
+	/* The thread now holds the only reference */
+	svc_put(serv);
+	if (error < 0)
+		return error;
+
 	nlmsvc_serv = serv;
 	register_inetaddr_notifier(&lockd_inetaddr_notifier);
 #if IS_ENABLED(CONFIG_IPV6)
@@ -446,7 +451,6 @@ static int lockd_create_svc(void)
  */
 int lockd_up(struct net *net, const struct cred *cred)
 {
-	struct svc_serv *serv;
 	int error;
 
 	mutex_lock(&nlmsvc_mutex);
@@ -454,25 +458,19 @@ int lockd_up(struct net *net, const struct cred *cred)
 	error = lockd_create_svc();
 	if (error)
 		goto err_create;
-	serv = nlmsvc_serv;
 
-	error = lockd_up_net(serv, net, cred);
+	error = lockd_up_net(nlmsvc_serv, net, cred);
 	if (error < 0) {
 		goto err_put;
 	}
 
-	error = lockd_start_svc(serv);
-	if (error < 0) {
-		lockd_down_net(serv, net);
-		goto err_put;
-	}
 	nlmsvc_users++;
 err_put:
 	if (nlmsvc_users == 0) {
 		lockd_unregister_notifiers();
+		kthread_stop(nlmsvc_task);
 		nlmsvc_serv = NULL;
 	}
-	svc_put(serv);
 err_create:
 	mutex_unlock(&nlmsvc_mutex);
 	return error;



  parent reply	other threads:[~2021-11-23  1:32 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-11-23  1:29 [PATCH 00/19 v2] SUNRPC: clean up server thread management NeilBrown
2021-11-23  1:29 ` [PATCH 15/19] lockd: rename lockd_create_svc() to lockd_get() NeilBrown
2021-11-23  1:29 ` [PATCH 13/19] lockd: move svc_exit_thread() into the thread NeilBrown
2021-11-23  1:29 ` [PATCH 06/19] NFSD: narrow nfsd_mutex protection in nfsd thread NeilBrown
2021-11-23  1:29 ` [PATCH 05/19] SUNRPC: use sv_lock to protect updates to sv_nrthreads NeilBrown
2021-11-23 16:43   ` Chuck Lever III
2021-11-29  0:11     ` NeilBrown
2021-11-23  1:29 ` [PATCH 10/19] lockd: introduce nlmsvc_serv NeilBrown
2021-11-23  1:29 ` [PATCH 14/19] lockd: introduce lockd_put() NeilBrown
2021-11-23  1:29 ` [PATCH 02/19] NFSD: handle error better in write_ports_addfd() NeilBrown
2021-11-23 16:44   ` Chuck Lever III
2021-11-28 23:49     ` NeilBrown
2021-11-23  1:29 ` NeilBrown [this message]
2021-11-23  1:29 ` [PATCH 16/19] SUNRPC: move the pool_map definitions (back) into svc.c NeilBrown
2021-11-23  1:29 ` [PATCH 07/19] NFSD: Make it possible to use svc_set_num_threads_sync NeilBrown
2021-11-23  1:29 ` [PATCH 04/19] nfsd: make nfsd_stats.th_cnt atomic_t NeilBrown
2021-11-23  1:29 ` [PATCH 01/19] SUNRPC/NFSD: clean up get/put functions NeilBrown
2021-11-23 16:45   ` Chuck Lever III
2021-11-28 23:36     ` NeilBrown
2021-11-23  1:29 ` [PATCH 18/19] lockd: use svc_set_num_threads() for thread start and stop NeilBrown
2021-11-23  1:29 ` [PATCH 09/19] NFSD: simplify locking for network notifier NeilBrown
2021-11-23  1:29 ` [PATCH 11/19] lockd: simplify management of network status notifiers NeilBrown
2021-11-23  1:29 ` [PATCH 08/19] SUNRPC: discard svo_setup and rename svc_set_num_threads_sync() NeilBrown
2021-11-23  1:29 ` [PATCH 19/19] NFS: switch the callback service back to non-pooled NeilBrown
2021-11-23  1:29 ` [PATCH 03/19] SUNRPC: stop using ->sv_nrthreads as a refcount NeilBrown
2021-11-23  1:29 ` [PATCH 17/19] SUNRPC: always treat sv_nrpools==1 as "not pooled" NeilBrown
2021-11-23 14:49 ` [PATCH 00/19 v2] SUNRPC: clean up server thread management J. Bruce Fields
2021-11-24 18:42   ` Chuck Lever III

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=163763097548.7284.17750816308590904344.stgit@noble.brown \
    --to=neilb@suse.de \
    --cc=bfields@fieldses.org \
    --cc=chuck.lever@oracle.com \
    --cc=linux-nfs@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.